CD4020AK3 - 14-Bit CMOS Counter, 3-12V | Texas Instruments
N.º da peça: CD4020AK3 ✗ Fim de vidaCD4020AK3 Visão geral
A ripple-carry binary counter is a type of sequential logic circuit that divides an input clock frequency by two at each counting stage. The CD4020A family belongs to the CD4000 CMOS logic series, whose architecture places counter, timing, and interface functions within the broader CMOS logic and integrated-circuit hierarchy. A clock applied to the counting input advances the internal binary state, while the available output stages provide useful frequency-divided signals without requiring a separate bank of cascaded counter packages.
The CD4020AK3 is specified for a 3 V to 12 V supply range, a 14-bit counting structure, and operation from -55 °C to +125 °C. Its 16-CFP package provides a temperature-rated ceramic mounting option for applications where reliability and environmental range are more important than the lower cost and smaller size of a plastic package. The counter also provides dedicated control inputs and multiple output taps, allowing a circuit designer to select the required division ratio rather than using only the full 14-bit terminal count.
The CD4020A implementation uses positive-edge clocking to advance its binary count and includes set and reset controls for defining the starting state. Because a ripple counter propagates carry transitions through successive stages, maximum operating frequency can depend on the specific clock waveform and propagation path. Designs should therefore use clean, fast edges, maintain an appropriate duty cycle, and account for settling time at the output stage being observed.
Typical uses include divide-by-N frequency generation, timer reference signals, pulse counting, industrial control sequencing, and clock-frequency division in instrumentation. The CD4020AK3 is particularly appropriate when the system requires one device to provide multiple division ratios, a wide operating voltage range, or operation across the -55 °C to +125 °C temperature range. An external crystal oscillator or clock source can drive the counter, while downstream logic selects the appropriate divided output.
PCB design should preserve a common ground reference between the counter, clock source, and receiving logic. Keep clock traces short, avoid routing the clock adjacent to noisy switching nodes, and use a local supply bypass capacitor close to the device power terminal. Unused outputs should be left unconnected unless a test point is useful, and control inputs should not float. Verify the external reset and set sequencing so that no invalid clock edge occurs during initialization.
This page combines the CD4020AK3 device characteristics, commercial sourcing guidance, application analysis, and engineering cautions for counter and divider designs. The manufacturer datasheet remains the controlling reference for pin assignments, maximum clock rates, output timing, and recommended operating conditions.
Alternativas drop-in para CD4020AK3 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Nenhuma alternativa drop-in disponível para este produto.
Solicitar alternativasCD4020AK3 Classificações máximas e características elétricas
| Product Type | 14-stage ripple-carry binary counter |
| Logic Family | CD4000B CMOS |
| Counting Element | 1 element |
| Counter Resolution | 14 bit |
| Supply Voltage Range | 3 V to 12 V |
| Faixa de temperatura de operação | -55 °C to +125 °C |
| Encapsulamento | 16-lead ceramic flat pack (CFP) |
| Number of Terminals | 16 |
| Tipo de montagem | Surface mount |
Guia de Configuração de Pinos do CD4020AK3 16-lead ceramic flat pack (cfp)
Configuração de pinos para CD4020AK3 (pacote 16-lead ceramic flat pack (cfp)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para CD4020AK3.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
CD4020AK3 é adequado para 6 aplicaçãos: Programmable Frequency Divider, Industrial Timer and Event Counter, Precision Timing Reference, Pulse and Repetition Rate Measurement, Sequencing and Retiming Logic, Low-Frequency Clock Generation.
Programmable Frequency Divider
The CD4020AK3 can divide a reference clock and present several binary division ratios at its count outputs. Its 14 sequential stages allow a designer to select a suitable divide ratio without cascading several separate counter packages. The 3 V to 12 V supply range supports conventional CMOS logic systems, while the -55 °C to +125 °C rating is useful in temperature-controlled industrial and military equipment. The principal design consideration is ripple propagation: higher-order outputs require additional settling time after a clock transition, so the selected output must be evaluated for timing margin in the manufacturer datasheet.
Recomendado
Industrial Timer and Event Counter
The CD4020AK3 is appropriate for counting fixed-duration input pulses or generating a delayed timing reference in industrial control equipment. Multiple count outputs allow supervisory logic to observe different stages of the sequence, which can simplify divide-by-N timing without a separate binary decoder. Its wide -55 °C to +125 °C operating range supports harsh ambient conditions when the surrounding system is also suitably rated. Engineers should define how set and reset initialize the counter, ensure the clock has a controlled duty cycle, and include a defined startup state so the first external event cannot produce an unintended count sequence.
Recomendado
Precision Timing Reference
A stable reference clock connected to the CD4020AK3 can produce a lower-frequency synchronization signal for instrumentation and test systems. Using the counter inside a feedback arrangement is not necessary for simple division, but multiple output taps make it possible to select a ratio that suits the receiving logic. The ceramic flat-pack configuration and extended temperature rating align with equipment designed for demanding environments. Timing accuracy remains dominated by the input oscillator and propagation delay at the selected output stage, so the clock edge and output tap should be chosen together rather than treating the counter as an ideal divider.
Recomendado
Pulse and Repetition Rate Measurement
The CD4020AK3 can count repeated sensor or switching pulses and expose a divided count state to downstream control logic. This makes it useful in repetition-rate monitors, batch counters, and supervisory systems where a microcontroller or discrete logic block needs a simple asynchronous counting reference. The device accepts a 3 V to 12 V operating environment and offers 14 count positions, allowing a coarse count range without an external decoder. For accurate measurement, account for ripple carry when an output transition is sampled near a clock edge, synchronize the sampled result, and use a clock source whose frequency and jitter satisfy the required measurement resolution.
Recomendado
Sequencing and Retiming Logic
The 14 count stages of the CD4020AK3 can form the basis of a multistep sequence generator when reset, set, and selected output taps feed external control logic. The counter is useful in systems requiring a repeatable binary progression rather than a free-running measurement counter. Its 16-CFP package suits compact surface-mount assemblies, and the broad temperature specification supports demanding equipment. Designers should establish priority between set and reset inputs, avoid simultaneous asynchronous control, and ensure the next enabled output cannot race the clock before the previous state has propagated through the required stages.
Recomendado
Low-Frequency Clock Generation
The CD4020AK3 can divide a higher-frequency crystal or oscillator signal into a lower-frequency clock for real-time counters, sampling systems, and supervisory logic. Multiple outputs make the design adaptable to several clock-rate requirements while preserving one reference source. The 3 V to 12 V operating range allows the counter to share power with compatible CMOS circuits, although input thresholds must be checked against each supply condition. Minimize capacitive loading on count outputs, maintain short clock routing, and observe the specified settling behavior before using an early-stage output as a precision time reference.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para CD4020AK3 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto |
|---|---|
| Brand | Texas Instruments |
| Package | 16-CFP |
| Product Type | Binary ripple counter |
| Counter Resolution | 14 bit |
| Number of Stages | 14 stages |
| Supply Voltage Range | 3 V to 12 V |
| Operating Temperature Range | -55 °C to +125 °C |
| Number of Terminals | 16 |
| Logic Family | CD4000B CMOS |
| Mounting Type | Surface mount |
Principais diferenciais
- Legacy 16-CFP configuration (vs CD4020BE)
- Broad temperature-grade positioning (vs CD4020BE)
- Integrated 14-stage division (vs SN74LS93DR)
Notas de projeto
Do not treat every CD4020B ordering code as a board-level replacement for the CD4020AK3. The CD4020AK3 uses a 16-CFP surface-mount footprint, whereas CD4020BE uses a 16-PDIP through-hole footprint. Confirm the package drawing, terminal numbering, pin functions, and control-input behavior in the manufacturer documentation before substituting any family member. A functional match without the correct footprint is not a drop-in replacement.
Keep the clock trace short and route it away from switching-power and high-current traces. Because this is a ripple-carry counter, carry transitions propagate through successive stages, and an early output can change shortly after the active clock edge. Sample only after the relevant propagation and settling interval, and use a clean clock edge with controlled rise and fall times to minimize counting uncertainty.
Place the supply bypass capacitor close to the device power terminal and provide a low-impedance ground return. Do not leave unused inputs floating, and keep the set, reset, and clock traces away from unrelated high-energy paths. Verify the startup sequence in hardware so that a reset or set event coincident with a clock transition cannot initialize the counter into an unintended state.
Operate the CD4020AK3 only within its specified 3 V to 12 V supply range and design the clock source so that its voltage levels remain valid at both ends of that range. CMOS input current is generally low, but dynamic current still increases with switching activity. Use a supply source with low ripple when the counter controls precision timing or feeds measurement circuitry.
Informações de conformidade
No specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 declaration was included in the available manufacturer and distributor information for the legacy CD4020AK3 ordering code.