آخری بار خریداری کا نوٹس: CD4020AK3 اپنی زندگی کے اختتام کے قریب ہے۔ آخری آرڈر کی تاریخ: ہم سے رابطہ کریں. دستیاب متبادل پرزے دیکھیں →
Texas Instruments

CD4020AK3 - 14-Bit CMOS Counter, 3-12V | Texas Instruments

MPN: CD4020AK3 ✗ اختتامِ زندگی
3 V to 12 V Vdss 16-lead ceramic flat pack (CFP) Package
MOQ: 1 |

CD4020AK3 جائزہ

Texas Instruments CD4020AK3 is a CMOS 14-stage ripple-carry binary counter operating from 3 V to 12 V in a 16-lead ceramic flat pack (CFP) package. It combines fourteen sequential counting stages with counter-control functions for frequency division, timing, and event sequencing. The qualified temperature range extends from -55 °C to +125 °C, supporting industrial, instrumentation, and military-temperature applications that require reliable operation across a broad thermal environment.

A ripple-carry binary counter is a type of sequential logic circuit that divides an input clock frequency by two at each counting stage. The CD4020A family belongs to the CD4000 CMOS logic series, whose architecture places counter, timing, and interface functions within the broader CMOS logic and integrated-circuit hierarchy. A clock applied to the counting input advances the internal binary state, while the available output stages provide useful frequency-divided signals without requiring a separate bank of cascaded counter packages.

The CD4020AK3 is specified for a 3 V to 12 V supply range, a 14-bit counting structure, and operation from -55 °C to +125 °C. Its 16-CFP package provides a temperature-rated ceramic mounting option for applications where reliability and environmental range are more important than the lower cost and smaller size of a plastic package. The counter also provides dedicated control inputs and multiple output taps, allowing a circuit designer to select the required division ratio rather than using only the full 14-bit terminal count.

The CD4020A implementation uses positive-edge clocking to advance its binary count and includes set and reset controls for defining the starting state. Because a ripple counter propagates carry transitions through successive stages, maximum operating frequency can depend on the specific clock waveform and propagation path. Designs should therefore use clean, fast edges, maintain an appropriate duty cycle, and account for settling time at the output stage being observed.

Typical uses include divide-by-N frequency generation, timer reference signals, pulse counting, industrial control sequencing, and clock-frequency division in instrumentation. The CD4020AK3 is particularly appropriate when the system requires one device to provide multiple division ratios, a wide operating voltage range, or operation across the -55 °C to +125 °C temperature range. An external crystal oscillator or clock source can drive the counter, while downstream logic selects the appropriate divided output.

PCB design should preserve a common ground reference between the counter, clock source, and receiving logic. Keep clock traces short, avoid routing the clock adjacent to noisy switching nodes, and use a local supply bypass capacitor close to the device power terminal. Unused outputs should be left unconnected unless a test point is useful, and control inputs should not float. Verify the external reset and set sequencing so that no invalid clock edge occurs during initialization.

This page combines the CD4020AK3 device characteristics, commercial sourcing guidance, application analysis, and engineering cautions for counter and divider designs. The manufacturer datasheet remains the controlling reference for pin assignments, maximum clock rates, output timing, and recommended operating conditions.

کے لیے ڈراپ اِن متبادل CD4020AK3 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس پروڈکٹ کے لیے کوئی ڈراپ اِن متبادل دستیاب نہیں۔

متبادل کی درخواست کریں

CD4020AK3 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Product Type 14-stage ripple-carry binary counter
Logic Family CD4000B CMOS
Counting Element 1 element
Counter Resolution 14 bit
Supply Voltage Range 3 V to 12 V
آپریٹنگ درجہ حرارت رینج -55 °C to +125 °C
پیکیج 16-lead ceramic flat pack (CFP)
Number of Terminals 16
ماؤنٹنگ ٹائپ Surface mount

CD4020AK3 16-lead ceramic flat pack (cfp) پن کنفیگریشن گائیڈ

CD4020AK3 (16-lead ceramic flat pack (cfp) پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔

CD4020AK3 کے لیے 16-lead ceramic flat pack (cfp) پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں CD4020AK3.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

CD4020AK3 کے لیے موزوں ہے 6 ایپلیکیشنs: Programmable Frequency Divider, Industrial Timer and Event Counter, Precision Timing Reference, Pulse and Repetition Rate Measurement, Sequencing and Retiming Logic, Low-Frequency Clock Generation.

⚡

Programmable Frequency Divider

The CD4020AK3 can divide a reference clock and present several binary division ratios at its count outputs. Its 14 sequential stages allow a designer to select a suitable divide ratio without cascading several separate counter packages. The 3 V to 12 V supply range supports conventional CMOS logic systems, while the -55 °C to +125 °C rating is useful in temperature-controlled industrial and military equipment. The principal design consideration is ripple propagation: higher-order outputs require additional settling time after a clock transition, so the selected output must be evaluated for timing margin in the manufacturer datasheet.

🏭

Industrial Timer and Event Counter

The CD4020AK3 is appropriate for counting fixed-duration input pulses or generating a delayed timing reference in industrial control equipment. Multiple count outputs allow supervisory logic to observe different stages of the sequence, which can simplify divide-by-N timing without a separate binary decoder. Its wide -55 °C to +125 °C operating range supports harsh ambient conditions when the surrounding system is also suitably rated. Engineers should define how set and reset initialize the counter, ensure the clock has a controlled duty cycle, and include a defined startup state so the first external event cannot produce an unintended count sequence.

🔧

Precision Timing Reference

A stable reference clock connected to the CD4020AK3 can produce a lower-frequency synchronization signal for instrumentation and test systems. Using the counter inside a feedback arrangement is not necessary for simple division, but multiple output taps make it possible to select a ratio that suits the receiving logic. The ceramic flat-pack configuration and extended temperature rating align with equipment designed for demanding environments. Timing accuracy remains dominated by the input oscillator and propagation delay at the selected output stage, so the clock edge and output tap should be chosen together rather than treating the counter as an ideal divider.

🧩

Pulse and Repetition Rate Measurement

The CD4020AK3 can count repeated sensor or switching pulses and expose a divided count state to downstream control logic. This makes it useful in repetition-rate monitors, batch counters, and supervisory systems where a microcontroller or discrete logic block needs a simple asynchronous counting reference. The device accepts a 3 V to 12 V operating environment and offers 14 count positions, allowing a coarse count range without an external decoder. For accurate measurement, account for ripple carry when an output transition is sampled near a clock edge, synchronize the sampled result, and use a clock source whose frequency and jitter satisfy the required measurement resolution.

⚙️

Sequencing and Retiming Logic

The 14 count stages of the CD4020AK3 can form the basis of a multistep sequence generator when reset, set, and selected output taps feed external control logic. The counter is useful in systems requiring a repeatable binary progression rather than a free-running measurement counter. Its 16-CFP package suits compact surface-mount assemblies, and the broad temperature specification supports demanding equipment. Designers should establish priority between set and reset inputs, avoid simultaneous asynchronous control, and ensure the next enabled output cannot race the clock before the previous state has propagated through the required stages.

🖥️

Low-Frequency Clock Generation

The CD4020AK3 can divide a higher-frequency crystal or oscillator signal into a lower-frequency clock for real-time counters, sampling systems, and supervisory logic. Multiple outputs make the design adaptable to several clock-rate requirements while preserving one reference source. The 3 V to 12 V operating range allows the counter to share power with compatible CMOS circuits, although input thresholds must be checked against each supply condition. Minimize capacitive loading on count outputs, maintain short clock routing, and observe the specified settling behavior before using an early-stage output as a precision time reference.

What is the CD4020AK3?
The CD4020AK3 is a 14-stage ripple-carry binary counter in the CD4000B CMOS logic family. It operates from 3 V to 12 V, provides a 14-bit counting structure, and is packaged in a 16-lead ceramic flat pack. According to the Texas Instruments CD4020B datasheet, the family is intended for frequency division, counting, and timing applications.
What is the operating voltage of CD4020AK3?
The CD4020AK3 operates from 3 V to 12 V. This range is explicitly listed for the device and places it within the CD4000B CMOS family. The manufacturer datasheet should be used to confirm input thresholds, output levels, and timing limits at the actual supply voltage selected for the application.
What is the counter resolution of CD4020AK3?
The CD4020AK3 has a 14-bit counter arrangement implemented as 14 sequential counter stages. The device is identified as a binary ripple counter with multiple count outputs. Because the internal stages are arranged in series, propagation through the complete chain is relevant when choosing the highest output tap for timing-sensitive designs.
Where can I download the CD4020AK3 datasheet PDF?
The manufacturer CD4020B datasheet is available through the official Texas Instruments page at https://www.ti.com/lit/gpn/CD4020B. Use the package and ordering-information sections to map the general CD4020B family information to the CD4020AK3 ceramic flat-pack configuration. The pin-description table should control PCB assignments.
Where can I find the CD4020AK3 pinout?
The CD4020AK3 pinout is defined in the pin-description table of the Texas Instruments CD4020B datasheet. The exact 16-CFP terminal arrangement must be followed rather than inferred from a 16-pin plastic-package drawing. Because a public, machine-verified pin list was not included with this page data, consult the manufacturer diagram before assigning tracks or test points.
What package does the CD4020AK3 use?
The CD4020AK3 uses a 16-lead ceramic flat pack, identified as CFP-16 in product information. It is a surface-mount package rather than a through-hole dual-in-line package. The ceramic construction and specified -55 °C to +125 °C operating range distinguish this ordering code from the more common plastic CD4020B package variants.
Is CD4020AK3 suitable for frequency division?
Yes, the CD4020AK3 is suitable for frequency division because it contains 14 sequential binary counting stages and multiple count outputs. Each stage can provide a different division ratio. The maximum usable input frequency still depends on clock-edge quality, supply voltage, propagation delay, and which output is used, so the manufacturer timing limits must be checked.
What is the difference between CD4020AK3 and CD4020BE?
The CD4020AK3 is specified as a 16-CFP, temperature-rated device, while CD4020BE is identified as a 16-PDIP option. Their physical footprints are not interchangeable, even though both belong to the CD4020B counter family. The CD4020AK3 therefore offers a potential functional equivalent for the counter function, but it is not a drop-in board replacement for CD4020BE.
Can CD4020AK3 replace CD4020BE on the same PCB?
No, CD4020AK3 cannot directly replace CD4020BE on the same PCB because the packages differ: CD4020AK3 uses CFP-16 and CD4020BE uses a through-hole 16-PDIP. Although both implement the CD4020B counter family, a PCB change, adapter, or new layout is required to move between these physical configurations.
When should I choose CD4020AK3 over a plastic CD4020B?
Choose CD4020AK3 when the design requires the 16-CFP package and operation across -55 °C to +125 °C rather than the limits associated with a plastic ordering variant. If room-temperature operation, lower cost, or through-hole assembly is sufficient, a compatible plastic CD4020B package may be easier to source and assemble. Verify the exact pinout and environmental requirements before selecting.
What is the best drop-in replacement for CD4020AK3?
No independently confirmed 16-CFP drop-in replacement for CD4020AK3 was identified in the available cross-reference results. A valid replacement must match the CFP-16 footprint, pin arrangement, counter edge, supply range, and timing characteristics; sharing only the CD4020 counter function is insufficient. Request a quote for the exact MPN and validate any proposed substitute against the manufacturer datasheet.
What can replace CD4020AK3?
A suitable replacement for CD4020AK3 must use the same 16-CFP footprint and provide equivalent clock, set, reset, and output behavior across 3 V to 12 V. No additional drop-in candidate was confirmed by the available cross-reference information, so changing packages requires PCB redesign. Use the manufacturer cross-reference and a component-engineering review before approving a substitute.
How do I design the clock input for CD4020AK3?
Drive the CD4020AK3 clock input with a clean signal whose amplitude and timing satisfy the manufacturer input specifications at the selected supply voltage. Keep the clock trace short, maintain the required logic levels, and account for ripple propagation when using a high-order output. Avoid placing the clock trace beside switching power nodes or other high-energy signals.
Where can I buy CD4020AK3 online?
Use the Request a Quote form on this page to request CD4020AK3 availability, lead time, and a formal quotation. The part is associated with legacy CD4020A inventory, so confirmation should include the exact CD4020AK3 ordering code and 16-CFP package rather than a generic CD4020B designation. No seller or marketplace is recommended by this page.
What is the price of CD4020AK3?
Current CD4020AK3 pricing and availability are handled through the Request a Quote form on this page. The form should be submitted with the exact MPN, required quantity, and delivery destination so that legacy 16-CFP inventory can be checked. Because availability can vary by quantity and package code, a quote is more reliable than a generic family-level price.
How long is the lead time for CD4020AK3?
The current lead time for CD4020AK3 should be confirmed through the Request a Quote form on this page. As a legacy CD4000B ordering code, its schedule depends on the quantity and availability of the 16-CFP configuration. Include the requested delivery date and production quantity with the inquiry to obtain an actionable commitment.
What are the key specifications of CD4020AK3 that engineers should know?
The key CD4020AK3 specifications are its 14-stage, 14-bit binary ripple-counter architecture, 3 V to 12 V supply range, 16-CFP package, and -55 °C to +125 °C operating temperature range. The device also provides set and reset control and multiple count outputs. Texas Instruments documentation identifies it as part of the CD4020B CMOS counter family.

کے لیے انجینئرنگ ریفرنس ڈیٹا CD4020AK3 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose CD4020AK3 when the PCB is standardized for the 16-CFP footprint, the counter must operate from 3 V to 12 V, and the system requires operation across -55 °C to +125 °C. It is especially suitable for legacy industrial or military-temperature designs that need several divide ratios from one counter. CD4020BE should not be selected for the same PCB because its 16-PDIP footprint requires different tracks and assembly. SN74LS93DR and SN74LS90DR are useful counter functions for other TTL-based designs, but they are not package-compatible substitutes for the CD4020AK3. If no source can confirm a 16-CFP drop-in replacement, redesigning the board around an available CD4020B package may be more practical than forcing a non-compatible substitute. Any alternative must be checked for clock edge, set/reset behavior, output timing, supply limits, temperature range, and footprint before release.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ
Brand Texas Instruments
Package 16-CFP
Product Type Binary ripple counter
Counter Resolution 14 bit
Number of Stages 14 stages
Supply Voltage Range 3 V to 12 V
Operating Temperature Range -55 °C to +125 °C
Number of Terminals 16
Logic Family CD4000B CMOS
Mounting Type Surface mount

اہم امتیازی خصوصیات

  • Legacy 16-CFP configuration (بمقابلہCD4020BE)
  • Broad temperature-grade positioning (بمقابلہCD4020BE)
  • Integrated 14-stage division (بمقابلہSN74LS93DR)

ڈیزائن نوٹس

Do not treat every CD4020B ordering code as a board-level replacement for the CD4020AK3. The CD4020AK3 uses a 16-CFP surface-mount footprint, whereas CD4020BE uses a 16-PDIP through-hole footprint. Confirm the package drawing, terminal numbering, pin functions, and control-input behavior in the manufacturer documentation before substituting any family member. A functional match without the correct footprint is not a drop-in replacement.

Keep the clock trace short and route it away from switching-power and high-current traces. Because this is a ripple-carry counter, carry transitions propagate through successive stages, and an early output can change shortly after the active clock edge. Sample only after the relevant propagation and settling interval, and use a clean clock edge with controlled rise and fall times to minimize counting uncertainty.

Place the supply bypass capacitor close to the device power terminal and provide a low-impedance ground return. Do not leave unused inputs floating, and keep the set, reset, and clock traces away from unrelated high-energy paths. Verify the startup sequence in hardware so that a reset or set event coincident with a clock transition cannot initialize the counter into an unintended state.

Operate the CD4020AK3 only within its specified 3 V to 12 V supply range and design the clock source so that its voltage levels remain valid at both ends of that range. CMOS input current is generally low, but dynamic current still increases with switching activity. Use a supply source with low ripple when the counter controls precision timing or feeds measurement circuitry.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

No specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 declaration was included in the available manufacturer and distributor information for the legacy CD4020AK3 ordering code.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-19 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

CD4020AK3 datasheet CD4020AK3 pinout CD4020AK3 datasheet pdf CD4020AK3 schematic CD4020AK3 equivalent CD4020AK3 replacement CD4020AK3 cross reference CD4020AK3 footprint CD4020AK3 price CD4020AK3 stock Texas Instruments CD4020AK3 CD4020AK3 14-bit counter CD4020AK3 3V 12V CD4020AK3 frequency divider CD4020AK3 vs CD4020BE

متعلقہ اجزاء اور اصطلاحات

Texas Instruments CD4020AK3 CD4020B CD4020BE CD4000B CMOS logic series binary counter ripple-carry counter sequential logic circuit counter divider CMOS logic integrated circuit semiconductor 16-CFP package ceramic flat pack surface-mount package 3 V to 12 V power supply -55 °C to +125 °C 14-stage counter 14-bit counter clock frequency division set and reset control pulse counting industrial timing military-temperature electronics
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں