onsemi

CD4050BCN - Hex Non-Inverting CMOS Buffer | onsemi

N.º da peça: CD4050BCN ✓ Ativo
1 supply Vdss 16-pin PDIP Package
MOQ: 1 |

CD4050BCN Visão geral

The onsemi CD4050BCN is a six-element, non-inverting CMOS buffer with one-bit push-pull outputs, supplied in a 16-pin PDIP package. The device uses six N-channel and six P-channel enhancement-mode MOSFETs, providing buffered non-inverting signal paths from a single power supply. Its six independent channels make it useful wherever multiple digital signals require buffering, isolation from fan-out loading, or restoration of logic levels.

A CMOS logic buffer is a digital integrated circuit that reproduces its input signal at an output while providing gain and reducing the loading imposed on the driving circuit. The CD4050BC belongs to the CD4000 CMOS logic family, placing it in the hierarchy of CMOS logic, logic IC, and digital semiconductor. Unlike an open-collector buffer, its specified push-pull output uses both pull-up and pull-down output stages to produce a defined low or high voltage.

The principal features of the CD4050BCN are its six parallel non-inverting channels, one-bit signal handling, push-pull output stage, and single-supply operation. Each channel preserves the logical polarity of its input, allowing a buffer to be inserted without changing Boolean logic. The monolithic CMOS construction supports low quiescent power in many logic applications and combines high input impedance with a low-impedance output capable of driving subsequent digital stages.

Technical operation is based on complementary N-channel and P-channel enhancement-mode transistors. The two transistor types combine to create the input stage, output drive, and internal logic functions. Because the outputs are push-pull, a low output is actively pulled toward ground while a high output is actively pulled toward the positive supply. This architecture is appropriate for conventional CMOS logic rails and for interfaces where a buffered output must present a more defined drive condition to the next stage.

Typical uses include buffering control and status signals in digital systems, supporting multiple CMOS logic inputs, driving standard 4000-series logic, and isolating a sensitive digital source from downstream capacitance. The six-channel organization can also simplify designs that previously required multiple discrete buffers. Each buffered path retains non-inverting behavior, which is important when the original logic equation must remain unchanged.

Designers should verify the operating voltage, input and output timing limits, absolute maximum ratings, and temperature range against the manufacturer datasheet before using the device at a system rail. Decoupling should follow the manufacturer recommendation, and unused inputs must not be left floating. The 16-pin PDIP package is intended for through-hole PCB assembly rather than a surface-mount production flow.

This page organizes the CD4050BCN function, package information, verified alternatives, and practical selection considerations in one engineering-focused reference. It also distinguishes confirmed drop-in candidates from alternatives that use a different package, helping designers avoid replacement parts that require board changes.

Alternativas drop-in para CD4050BCN — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com CD4050BCN (mesmo formato e footprint) — diferindo em Bits per Element, Logic Type, Technology.

Texas Instruments
Bits per Element: 1 bit per element
Logic Type: Non-inverting buffer
Technology: CMOS
Comparar com CD4050BCN →

CD4050BE

✅ Drop-In
Texas Instruments
📦 DIP-16
CMOS hex buffer and logic-level converter · 6 elements · 1 bit per element · Non-inverting buffer · Push-pull · 3 V to 18 V · CMOS · Supported using one supply voltage

Consulte o preço

Ver ficha técnica →

MC14050BCPG

✅ Drop-In
📦 DIP-16
Same 16-pin DIP format and hex non-inverting buffer function; manufacturer-specific voltage, timing, and drive characteristics must be compared.

📋 Alternativa de referência (fora do catálogo)

CD4050BCN Classificações máximas e características elétricas

Number of Elements 6 elements
Bits per Element 1 bit
Logic Type Buffer, non-inverting
Tipo de saída Push-pull
Número de saídas 6 outputs
Supply Voltage Count 1 supply
Technology Complementary MOS (CMOS)
Tipo de transistor N-channel and P-channel enhancement-mode MOSFETs
Encapsulamento 16-pin PDIP
Número de pinos 16 pins
Tipo de montagem Through-hole

Guia de Configuração de Pinos do CD4050BCN 16-pin pdip

Configuração de pinos para CD4050BCN (pacote 16-pin pdip). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 16-pin pdip para CD4050BCN

Nenhum dado detalhado de pinagem disponível para CD4050BCN.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

CD4050BCN é adequado para 6 aplicaçãos: Digital Control-Signal Buffering, CMOS Logic Fan-Out Isolation, Single-Supply Logic-Level Conversion, Sequential Logic Control, Interface Between Logic Families, General-Purpose CMOS Signal Conditioning.

🔧

Digital Control-Signal Buffering

The CD4050BCN is suitable for buffering several digital control signals without changing their Boolean polarity. Its six channels provide one dedicated buffer path per bit, while the push-pull output stage produces a defined high or low state. Compared with driving a logic input directly from a high-impedance source, placing the device at the interface restores signal drive and isolates the source from downstream loading. For a control panel, for example, six buffered lines can carry enable, mode, reset, and status commands between circuit sections. The principal engineering checks are the chosen supply voltage, output current per channel, fan-out into the connected family, and whether the propagation delay is acceptable for the control timing.

🏭

CMOS Logic Fan-Out Isolation

The CD4050BCN can isolate a sensitive logic source from the capacitance presented by connected CMOS loads. Each of its six channels accepts a one-bit input and presents a push-pull output that does not invert the logic. This arrangement is useful when a generated or latched control signal must reach multiple 4000-series inputs without loading the original driver. The buffer’s six-channel structure allows several isolated paths to be implemented in one 16-pin PDIP package. Designers should determine the total input current drawn by the loads, compare it with the output-current rating in the manufacturer datasheet, and confirm that the added propagation delay remains compatible with the system timing.

⚡

Single-Supply Logic-Level Conversion

The CD4050BCN supports logic-level conversion using a single supply voltage, as identified in the manufacturer datasheet. This makes its non-inverting channels useful when a signal must be shifted into the voltage domain recognized by a compatible CMOS load. Unlike a dual-supply interface circuit, the device operates from one VDD rail and shares the same supply reference. The level-conversion behavior still requires careful threshold analysis: the input voltage must cross the receiving device’s switching threshold, and the output high and low levels must meet the load’s requirements. Check supply limits, input thresholds, output levels, and timing rather than assuming that every signal amplitude can be converted automatically.

🖥️

Sequential Logic Control

The CD4050BCN can provide buffered, non-inverting control paths for a sequential logic block built from CMOS gates. Six channels make it practical to distribute clock-enable, reset, mode-select, and state-transition commands while preserving their active logic levels. A push-pull output is particularly useful when the control lines must present a consistent state across several connected logic inputs. Place the buffer close to the receiving logic when trace capacitance or shared-bus loading is significant. Verify the delay introduced by the buffer against the available timing margin, and ensure that the power rail can support all six outputs simultaneously when several control lines change at the same time.

🌐

Interface Between Logic Families

The CD4050BCN can serve as a bridge between a compatible CMOS signal source and a load that requires buffered non-inverting drive. The CD4050BC datasheet describes logic-level conversion using one supply voltage, while the six push-pull channels provide defined output states. A practical interface may use the device when the receiving logic cannot be driven reliably from a weak or high-impedance source. The buffer cannot arbitrarily translate incompatible voltage standards, so the engineer must verify that the input thresholds, output levels, supply range, and timing of both devices overlap. This makes the part suitable for compatible CMOS logic, but not for unrestricted conversion between unrelated voltage domains.

🔧

General-Purpose CMOS Signal Conditioning

The CD4050BCN provides a straightforward way to condition digital signals in mixed analog and control systems. Its non-inverting channels can buffer comparator, latch, or counter outputs before they reach another logic block, reducing sensitivity to input loading. The monolithic CMOS implementation combines N-channel and P-channel enhancement-mode transistors, while the push-pull output stage supports repeatable logic states. Because the device contains six channels, a board can allocate them to separate alarms, interlocks, mode commands, or acknowledgment signals rather than adding several discrete packages. The design review should include the allowable input levels, output drive, propagation delay, power consumption, and the requirement that every unused CMOS input be connected to a defined state.

Resumo dos produtos recomendados

CD4050BE Texas Instruments Usado em: Digital Control-Signal Buffering, CMOS Logic Fan-Out Isolation, Single-Supply Logic-Level Conversion, Sequential Logic Control, Interface Between Logic Families, General-Purpose CMOS Signal Conditioning MC14050BCPG Cross-brand hex non-inverting buffer alternative Usado em: Digital Control-Signal Buffering, CMOS Logic Fan-Out Isolation, Single-Supply Logic-Level Conversion, Sequential Logic Control, Interface Between Logic Families, General-Purpose CMOS Signal Conditioning
What is the CD4050BCN?
The CD4050BCN is a six-element, non-inverting CMOS logic buffer with push-pull outputs in a 16-pin PDIP package. According to the CD4050BC datasheet, the monolithic circuit is constructed with complementary N-channel and P-channel enhancement-mode transistors. Each of its six channels buffers a one-bit signal without changing its logical polarity, while the push-pull output provides a defined low or high state for the connected CMOS load.
How many independent buffers does the CD4050BCN contain?
The CD4050BCN contains six independent non-inverting buffer channels. According to the manufacturer datasheet, each element handles one bit and uses a push-pull output. This makes the device suitable for parallel signal conditioning, logic isolation, and multiple-control-line designs. The six-channel organization can reduce the component count compared with a design using separate single-channel buffers.
What is the difference between a push-pull and open-drain buffer?
A push-pull buffer actively drives its output toward the supply rail or ground, while an open-drain buffer can pull the output low but requires an external pull-up resistor to establish a high state. The CD4050BCN datasheet identifies the device as having push-pull outputs. This distinction matters when the downstream circuit expects a defined high voltage without an additional pull-up component.
Where can I download the CD4050BCN datasheet PDF?
The CD4050BCN datasheet PDF can be obtained from the onsemi documentation page or from the manufacturer-hosted technical documentation linked by the product listings. The manufacturer datasheet is the authoritative source for the 16-pin PDIP pin assignment, voltage ratings, timing limits, and recommended operating conditions. Use the datasheet pin table directly when assigning PCB nets and checking unused inputs.
Where is the CD4050BCN pinout?
The CD4050BCN pinout is published in the pin-assignment section of the manufacturer datasheet for the 16-pin PDIP package. Use that table to identify the six input pins, six output pins, supply terminals, and ground terminals on the physical board. The device also supports a supply-voltage-only logic-level conversion function, so accurate rail and ground identification is essential before power is applied.
Where can I buy CD4050BCN online?
The CD4050BCN can be requested through the Request a Quote form on this XAIPART product page. Submit the required quantity, package, and delivery information to obtain current sourcing confirmation, commercial terms, and lead time. The exact CD4050BCN ordering code is important because CD4050-series devices also exist in surface-mount packages and other package variants.
What is the price of the CD4050BCN?
Current CD4050BCN commercial terms are available through the Request a Quote form on this page. Submit the required quantity and destination to receive a current quotation and availability confirmation. Because component pricing changes with quantity, inventory, and market conditions, the form is the appropriate source for a transaction-ready quotation rather than a static price statement.
What is the lead time for CD4050BCN?
The current CD4050BCN lead time should be confirmed through the Request a Quote form on this page. Provide the required quantity, target package, and shipment location so the supplier can return a current lead-time commitment. For production planning, request the 16-pin PDIP ordering code explicitly and include any date by which the components must be received.
Is the CD4050BCN currently in stock?
Current CD4050BCN inventory status is available through the Request a Quote form on this page. Include the required quantity and any approved-source or traceability requirements with the request. A distributor listing marked as available does not replace a firm order confirmation, particularly for production builds where allocation and replenishment schedules may vary.
CD4050BCN vs CD4050BE - which is better for a 16-pin through-hole design?
The CD4050BCN and CD4050BE are the better comparison for a 16-pin through-hole design because both are identified as 16-pin DIP devices and implement the hex non-inverting buffer function. According to the published cross-reference information, they share the same package format and principal classification. Electrical limits and qualification details should still be compared against the current datasheets before substituting one for the other.
CD4050BCN vs MC14050BCPG - are they functionally equivalent?
The CD4050BCN and MC14050BCPG are functionally comparable hex non-inverting CMOS buffers, and both are identified as 16-pin through-hole devices in the cross-reference information. The MC14050BCPG is an NXP part, while the CD4050BCN is associated with onsemi and originally Fairchild Semiconductor. Verify supply voltage, timing, output current, temperature limits, and lifecycle status for the exact manufacturer before production substitution.
When should I choose the CD4050BCN instead of another hex buffer?
Choose the CD4050BCN when the design needs six parallel non-inverting, one-bit buffers with push-pull outputs in a 16-pin PDIP package. Its non-inverting behavior allows it to be inserted without altering the Boolean logic of the signals. Compare the candidate's operating voltage, propagation delay, output drive, and temperature limits before making the selection, particularly when driving higher-capacitance nodes.
Is the CD4050BCN suitable for driving multiple CMOS logic inputs?
The CD4050BCN is suitable for buffering signals that feed multiple compatible CMOS logic inputs because its six channels provide independent push-pull outputs. The manufacturer identifies the device as a six-element non-inverting buffer with one-bit channels and one-supply operation. The number of inputs that one output can safely drive must be calculated from the output current and input loading limits in the manufacturer datasheet.
What can replace the CD4050BCN?
The CD4050BCN can be replaced by a pin-compatible hex non-inverting buffer such as the CD4050BE or MC14050BCPG when its electrical ratings also satisfy the design requirements. Both candidates are identified as 16-pin DIP alternatives in the published cross-reference information. A valid replacement must preserve the 16-pin footprint, non-inverting logic, push-pull output behavior, supply limits, timing, and output-drive requirements.
What is the best NXP equivalent for the CD4050BCN?
The MC14050BCPG is the best-supported NXP candidate listed for a 16-pin through-hole CD4050BCN replacement. It is identified as a comparable 16-pin DIP hex non-inverting buffer, making the physical replacement path plausible. Before approving it, compare the NXP datasheet against the CD4050BCN for supply voltage, propagation delay, output current, temperature range, and any functional differences.
What are the key specifications of CD4050BCN that engineers should know?
The CD4050BCN is a six-element, one-bit, non-inverting CMOS buffer with push-pull outputs, supplied in a 16-pin PDIP package. According to the manufacturer datasheet, it uses N-channel and P-channel enhancement-mode MOSFETs and supports logic-level conversion using one supply voltage. Key design checks include the supply range, propagation delay, output current, operating temperature, and exact pin assignment.

Dados de referência de engenharia para CD4050BCN — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the CD4050BCN when a design requires six independent, non-inverting buffer channels with push-pull outputs and a 16-pin PDIP footprint. It is particularly useful for reducing loading on sensitive logic signals, distributing control signals, and interfacing compatible CMOS loads from one supply. The CD4050BE is a practical drop-in candidate when its current electrical ratings meet the design requirements and its lifecycle position is acceptable. The MC14050BCPG offers another 16-pin DIP source for the same functional class, but it requires a direct review of NXP supply limits, timing, output drive, temperature range, and qualification. Surface-mount alternatives such as SOIC-package versions should not be selected for a PDIP land pattern without a PCB redesign. For all replacements, verify unused-input behavior, decoupling requirements, absolute maximum ratings, and lifecycle commitments before approving a production change.

Comparação com alternativas

Parâmetro Este produto CD4050BE MC14050BCPG
Package 16-pin PDIP DIP-16 DIP-16
Brand onsemi Texas Instruments NXP
Logic Function Hex non-inverting buffer Hex non-inverting buffer Hex non-inverting buffer
Number of Elements 6 elements 6 elements 6 elements
Bits per Element 1 bit 1 bit 1 bit
Mounting Type Through-hole Through-hole Through-hole

Principais diferenciais

  • Six dedicated non-inverting channels in one through-hole package (vs CD4050BE)
  • Push-pull output specification (vs MC14050BCPG)
  • Single-supply level-conversion function (vs CD4050BE)

Notas de projeto

Treat all 16 package leads according to the manufacturer pin-assignment table, including supply and ground identification. Place the device so that every input has a defined logic state; unused CMOS inputs must be tied to a valid rail rather than left floating. Because the CD4050BCN uses a 16-pin PDIP package, confirm that the PCB has the correct through-hole footprint, pin spacing, and drill pattern before releasing a board layout.

Confirm the complete VDD range, quiescent current, and output-current limits against the manufacturer datasheet. If multiple channels can switch simultaneously, size the supply trace and bypass capacitor for the combined dynamic current rather than a single steady output. The device performs logic-level conversion using one supply, so the chosen VDD must also satisfy the input thresholds and output-level requirements of every connected CMOS load.

Check propagation delay, output rise and fall behavior, and the capacitive load permitted for each channel before using the buffer in a timing-sensitive path. The push-pull output provides a more defined drive than an open-drain output, but long PCB traces or simultaneous output switching can still affect signal integrity. Keep sensitive routed away from the supply entry and output paths when the surrounding system contains fast-switching circuitry.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified in the product listings. AEC-Q100 is not applicable because the CD4050BCN is a general-purpose logic IC rather than an automotive-qualified device.

Buscas relacionadas

cd4050bcn datasheet CD4050BCN datasheet pdf CD4050BCN pinout CD4050BCN schematic CD4050BCN equivalent CD4050BCN replacement CD4050BCN cross reference CD4050BCN vs CD4050BE CD4050BCN vs MC14050BCPG onsemi CD4050BCN CD4050BCN DIP-16 CD4050BCN hex CMOS buffer CD4050BCN price CD4050BCN stock CD4050BCN logic-level conversion

Componentes & termos relacionados

onsemi Fairchild Semiconductor CD4050BCN CD4050BC CD4050BE MC14050BCPG Texas Instruments NXP CMOS complementary MOS logic buffer non-inverting buffer hex buffer logic IC digital semiconductor push-pull output logic-level conversion N-channel enhancement-mode MOSFET P-channel enhancement-mode MOSFET PDIP-16 through-hole package CD4000 logic family signal buffering digital control fan-out isolation
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ