CD4052BCN - 4:1 CMOS Analog Multiplexer | onsemi
N.º da peça: CD4052BCN ✓ AtivoCD4052BCN Visão geral
An analog multiplexer is an interface IC that connects one of several analog signal lines to a shared output. The multiplexer-demultiplexer category extends into analog switches, signal selectors, and interface ICs. The CD4052BCN uses address-control inputs to select one of four channels, making it useful for channel routing, signal selection, test systems, and control interfaces where multiple analog sources must share limited routing resources.
The main features of the CD4052BCN are its two-circuit, 4:1 configuration, 240-ohm ON impedance, and low OFF leakage current. These characteristics help preserve signal integrity when the device switches between sources. Its 16-pin PDIP package also provides a through-hole format that is convenient for prototyping, educational assemblies, legacy equipment, and industrial control boards that use socketed or manually assembled components.
The CD4052BCN belongs to the CD4000 CMOS logic family, combining digital address decoding with analog signal switching. Address inputs determine the active pair while the device remains in the selected state, allowing the same package to support both multiplexing and demultiplexing functions. Its low ON impedance is particularly useful when connecting higher-impedance sensors, measurement inputs, or low-frequency analog sources to a common front end.
Typical uses include sensor-channel selection, data-acquisition systems, instrumentation, industrial control interfaces, audio routing, and communication equipment. In a data-acquisition circuit, four inputs can be presented to one amplifier or converter in sequence. In a test system, the multiplexer can reduce the number of analog input connections required by the controller while preserving predictable channel isolation when a channel is deselected.
When laying out a circuit, treat all enable and address inputs as normal CMOS logic signals and keep analog traces short to reduce coupling from digital switching activity. Confirm the supply-voltage range, control thresholds, channel-breakdown behavior, and maximum analog signal voltage against the manufacturer datasheet before applying signals outside the selected channel.
This page organizes the CD4052BCN channel function, package information, sourcing details, pin-compatible alternatives, and application guidance into one engineering reference. It also highlights where replacement qualification requires checking logic levels, supply voltage, signal range, and timing rather than relying on package appearance alone.
Alternativas drop-in para CD4052BCN — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com CD4052BCN (mesmo formato e footprint) — diferindo em Package.
CD4052BE
✅ Drop-InConsulte o preço
Ver ficha técnica →MC74HC4052ANG
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
CD4052BCN Especificações
| Device Type | 2-circuit analog switch |
| Multiplexer Configuration | 4:1 |
| ON Resistance | 240 ohm |
| Number of Channels | 4 channels |
| Control Type | Digital |
| Technology | CMOS |
| Multiplexer/Demultiplexer Function | Multiplexer and demultiplexer |
| Encapsulamento | 16-PDIP |
| Contagem de pinos | 16 pins |
| Tipo de montagem | Through-hole |
| Status do ciclo de vida | Active |
Guia de Configuração de Pinos do CD4052BCN 16-pdip
Configuração de pinos para CD4052BCN (pacote 16-pdip). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.
Nenhum dado detalhado de pinagem disponível para CD4052BCN.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
CD4052BCN é adequado para 6 aplicaçãos: Sensor Channel Selection, Data Acquisition Systems, Industrial Control Interfaces, Instrumentation Signal Routing, Audio Signal Routing, Legacy Test Equipment.
Sensor Channel Selection
The CD4052BCN suits analog sensor selection when four inputs must share one measurement chain. Its 240-ohm ON resistance limits channel loading, while the low OFF leakage current helps isolate deselected sensors from the selected signal path. Place the device close to the sensor inputs and route the selected output toward the amplifier or converter to minimize noise pickup. Because the CD4052BCN is a CMOS 4:1 multiplexer with digital selection, the control signals can be generated by a microcontroller or logic IC. Verify the allowable input swing and supply voltage in the onsemi datasheet before connecting powered sensor outputs.
Recomendado
Data Acquisition Systems
In a multiplexed data-acquisition system, the CD4052BCN reduces the number of analog connections required by presenting four channels in sequence to a shared amplifier or converter. The 240-ohm ON resistance provides a defined path for many low-frequency sensor signals, and the very low OFF leakage current reduces coupling from inactive channels. The device's two switching sections can support parallel channel groups when system timing permits. Keep the analog trace between the multiplexer and converter short, use a stable reference and grounded design, and confirm input capacitance and settling requirements before selecting the sampling rate.
Recomendado
Industrial Control Interfaces
The CD4052BCN can route several low-bandwidth process or control signals through one shared interface in an industrial controller. Its dual 4:1 organization provides two independent analog paths, while the 240-ohm ON resistance is suitable for many voltage-sense and command lines when the load current remains modest. Digital address and enable inputs support deterministic channel selection from a sequencer or controller. Maintain clear separation between sensitive analog routing and switching control traces, and confirm the device's operating-temperature range and maximum analog voltage for the target industrial environment.
Recomendado
Instrumentation Signal Routing
The CD4052BCN can select among four measurement inputs in bench instrumentation where modular routing and serviceability are important. Its 240-ohm ON resistance minimizes loading of medium-impedance sources, and the very low OFF leakage current improves isolation between channels. The 16-PDIP package makes the device straightforward to mount on through-hole analog boards and replacement assemblies. For precision measurements, evaluate source impedance, bandwidth, capacitance, charge injection, and offset specifications in the manufacturer datasheet. Add buffering when the source impedance is high or the selected channel must drive a long cable.
Recomendado
Audio Signal Routing
The CD4052BCN can route low-frequency audio or control signals among multiple sources when channel isolation and simple digital selection are more important than high-bandwidth performance. The 240-ohm ON resistance is practical for many line-level routing paths, and the low OFF leakage helps reduce unwanted interaction between deselected sources. Its dual switching arrangement allows two related audio buses to be selected without adding another package. Keep the analog path short, maintain a common ground reference, and check distortion, bandwidth, and maximum signal amplitude against the onsemi datasheet before using the device with high-fidelity or long cable connections.
Recomendado
Legacy Test Equipment
The CD4052BCN is a practical fit for legacy test equipment that uses a 16-pin PDIP multiplexer to combine several test points. Its through-hole package supports socketed modules, manual assembly, and repair of older control boards, while the 4:1 architecture reduces the number of analog lines required by the tester. The 240-ohm ON resistance and low OFF leakage support many low-frequency measurement paths. Before upgrading a fixture, check address and enable polarity, control thresholds, analog signal limits, and channel isolation. A replacement with the same package must still pass those electrical checks before it is considered drop-in.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para CD4052BCN — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | CD4052BE | MC74HC4052ANG |
|---|---|---|---|
| Brand | onsemi | Texas Instruments | onsemi |
| Package | 16-PDIP | 16-PDIP | 16-PDIP |
| Switch Configuration | 4:1 | 4:1 | 4:1 |
| Circuit Count | 2 circuits | 2 circuits | 2 circuits |
| Technology | CMOS | CMOS | CMOS |
| Control Type | Digital | Digital | Digital |
| Mounting Type | Through-hole | Through-hole | Through-hole |
Principais diferenciais
- Documented 240-ohm ON resistance (vs CD4052BE)
- Dual 4:1 CMOS routing in a through-hole package (vs MC74HC4052ANG)
- Low OFF leakage with rated ON resistance (vs CD4052BE)
Notas de projeto
Route the selected analog output directly toward the receiving amplifier or converter and keep it short. The CD4052BCN has 240-ohm ON resistance, so long PCB traces can add capacitance and susceptibility to coupling. Maintain a continuous ground reference beneath the analog path, avoid switching high-current traces alongside the selected channel, and confirm settling behavior against the bandwidth of the signals being routed.
Separate the digital address and enable traces from the analog inputs and outputs, and keep the multiplexer close to the source of the signals it selects. Use the manufacturer pin-description and truth-table information when assigning the 16-PDIP footprint. Incorrect enable polarity or address ordering can select an unintended channel even when the PCB footprint is physically correct.
Do not assume that a PDIP-16 footprint proves electrical compatibility. Before replacing CD4052BCN with CD4052BE or MC74HC4052ANG, compare supply voltage, logic thresholds, enable polarity, analog input limits, ON resistance, leakage, and switching time using both manufacturer datasheets. The 240-ohm resistance and very low OFF leakage of the target are performance characteristics that should be checked rather than inferred from the channel count.
Informações de conformidade
The verified CD4052BCN listings do not state RoHS, REACH, halogen-free, lead-free, conflict-minerals, or automotive qualification status. AEC-Q100 is not applicable to the catalogued commercial CD4052BCN configuration based on the absence of an automotive-qualified ordering designation.