onsemi

CD4052BCN - 4:1 CMOS Analog Multiplexer | onsemi

MPN: CD4052BCN ✓ সক্রিয়
240 ohm Rds(on) 16-PDIP Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

CD4052BCN সারাংশ

The onsemi CD4052BCN is a dual 4:1 CMOS analog multiplexer and demultiplexer with 240 ohms ON resistance, digitally controlled selection, and a 16-pin PDIP package. It is designed to route analog signals among multiple input and output paths while providing low ON impedance and very low OFF leakage current.

An analog multiplexer is an interface IC that connects one of several analog signal lines to a shared output. The multiplexer-demultiplexer category extends into analog switches, signal selectors, and interface ICs. The CD4052BCN uses address-control inputs to select one of four channels, making it useful for channel routing, signal selection, test systems, and control interfaces where multiple analog sources must share limited routing resources.

The main features of the CD4052BCN are its two-circuit, 4:1 configuration, 240-ohm ON impedance, and low OFF leakage current. These characteristics help preserve signal integrity when the device switches between sources. Its 16-pin PDIP package also provides a through-hole format that is convenient for prototyping, educational assemblies, legacy equipment, and industrial control boards that use socketed or manually assembled components.

The CD4052BCN belongs to the CD4000 CMOS logic family, combining digital address decoding with analog signal switching. Address inputs determine the active pair while the device remains in the selected state, allowing the same package to support both multiplexing and demultiplexing functions. Its low ON impedance is particularly useful when connecting higher-impedance sensors, measurement inputs, or low-frequency analog sources to a common front end.

Typical uses include sensor-channel selection, data-acquisition systems, instrumentation, industrial control interfaces, audio routing, and communication equipment. In a data-acquisition circuit, four inputs can be presented to one amplifier or converter in sequence. In a test system, the multiplexer can reduce the number of analog input connections required by the controller while preserving predictable channel isolation when a channel is deselected.

When laying out a circuit, treat all enable and address inputs as normal CMOS logic signals and keep analog traces short to reduce coupling from digital switching activity. Confirm the supply-voltage range, control thresholds, channel-breakdown behavior, and maximum analog signal voltage against the manufacturer datasheet before applying signals outside the selected channel.

This page organizes the CD4052BCN channel function, package information, sourcing details, pin-compatible alternatives, and application guidance into one engineering reference. It also highlights where replacement qualification requires checking logic levels, supply voltage, signal range, and timing rather than relying on package appearance alone.

এর জন্য ড্রপ-ইন বিকল্প CD4052BCN — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible CD4052BCN (একই form factor এবং footprint) — পার্থক্য রয়েছে Package.

CD4052BE

✅ ড্রপ-ইন
Texas Instruments
📦 16-PDIP
Dual 4:1 analog multiplexer/demultiplexer · 2 · 4:1 · 20 V · 3 V to 20 V · 240 ohm · 125 ohm typical · Very low; specific value not supplied

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

MC74HC4052ANG

✅ ড্রপ-ইন
📦 16-PDIP
Same documented 16-PDIP and 4-channel CMOS multiplexer form factor; HC-family voltage levels and switching or leakage characteristics may differ from CD4052BCN.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

CD4052BCN বিশেষণ

Device Type 2-circuit analog switch
Multiplexer Configuration 4:1
ON Resistance 240 ohm
Number of Channels 4 channels
Control Type Digital
Technology CMOS
Multiplexer/Demultiplexer Function Multiplexer and demultiplexer
প্যাকেজ 16-PDIP
পিন সংখ্যা 16 pins
মাউন্টিং টাইপ Through-hole
লাইফসাইকেল স্ট্যাটাস Active

CD4052BCN 16-pdip পিন কনফিগারেশন গাইড

CD4052BCN (16-pdip প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

CD4052BCN-এর জন্য 16-pdip প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি CD4052BCN.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

CD4052BCN এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Sensor Channel Selection, Data Acquisition Systems, Industrial Control Interfaces, Instrumentation Signal Routing, Audio Signal Routing, Legacy Test Equipment.

🧩

Sensor Channel Selection

The CD4052BCN suits analog sensor selection when four inputs must share one measurement chain. Its 240-ohm ON resistance limits channel loading, while the low OFF leakage current helps isolate deselected sensors from the selected signal path. Place the device close to the sensor inputs and route the selected output toward the amplifier or converter to minimize noise pickup. Because the CD4052BCN is a CMOS 4:1 multiplexer with digital selection, the control signals can be generated by a microcontroller or logic IC. Verify the allowable input swing and supply voltage in the onsemi datasheet before connecting powered sensor outputs.

📊

Data Acquisition Systems

In a multiplexed data-acquisition system, the CD4052BCN reduces the number of analog connections required by presenting four channels in sequence to a shared amplifier or converter. The 240-ohm ON resistance provides a defined path for many low-frequency sensor signals, and the very low OFF leakage current reduces coupling from inactive channels. The device's two switching sections can support parallel channel groups when system timing permits. Keep the analog trace between the multiplexer and converter short, use a stable reference and grounded design, and confirm input capacitance and settling requirements before selecting the sampling rate.

🏭

Industrial Control Interfaces

The CD4052BCN can route several low-bandwidth process or control signals through one shared interface in an industrial controller. Its dual 4:1 organization provides two independent analog paths, while the 240-ohm ON resistance is suitable for many voltage-sense and command lines when the load current remains modest. Digital address and enable inputs support deterministic channel selection from a sequencer or controller. Maintain clear separation between sensitive analog routing and switching control traces, and confirm the device's operating-temperature range and maximum analog voltage for the target industrial environment.

🔧

Instrumentation Signal Routing

The CD4052BCN can select among four measurement inputs in bench instrumentation where modular routing and serviceability are important. Its 240-ohm ON resistance minimizes loading of medium-impedance sources, and the very low OFF leakage current improves isolation between channels. The 16-PDIP package makes the device straightforward to mount on through-hole analog boards and replacement assemblies. For precision measurements, evaluate source impedance, bandwidth, capacitance, charge injection, and offset specifications in the manufacturer datasheet. Add buffering when the source impedance is high or the selected channel must drive a long cable.

🎧

Audio Signal Routing

The CD4052BCN can route low-frequency audio or control signals among multiple sources when channel isolation and simple digital selection are more important than high-bandwidth performance. The 240-ohm ON resistance is practical for many line-level routing paths, and the low OFF leakage helps reduce unwanted interaction between deselected sources. Its dual switching arrangement allows two related audio buses to be selected without adding another package. Keep the analog path short, maintain a common ground reference, and check distortion, bandwidth, and maximum signal amplitude against the onsemi datasheet before using the device with high-fidelity or long cable connections.

🖥️

Legacy Test Equipment

The CD4052BCN is a practical fit for legacy test equipment that uses a 16-pin PDIP multiplexer to combine several test points. Its through-hole package supports socketed modules, manual assembly, and repair of older control boards, while the 4:1 architecture reduces the number of analog lines required by the tester. The 240-ohm ON resistance and low OFF leakage support many low-frequency measurement paths. Before upgrading a fixture, check address and enable polarity, control thresholds, analog signal limits, and channel isolation. A replacement with the same package must still pass those electrical checks before it is considered drop-in.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

What is the CD4052BCN?
The CD4052BCN is a dual 4:1 CMOS analog multiplexer and demultiplexer with a 240-ohm ON resistance in a 16-pin PDIP package. According to the onsemi CD4052BCN datasheet, it is digitally controlled and is intended for routing low-frequency analog signals. Its two switching sections can each select one of four channels using the address and enable controls.
What is the ON resistance of CD4052BCN?
The CD4052BCN has a rated ON resistance of 240 ohms. According to the onsemi CD4052BCN datasheet, this low ON impedance helps limit the voltage drop and loading introduced when the selected analog channel carries current. The manufacturer datasheet should also be consulted for the exact test voltage and current conditions associated with this figure.
How many channels can the CD4052BCN select?
Each switching section of the CD4052BCN can select among 4 analog channels, giving the device a 4:1 multiplexer configuration and two independent circuits per package. According to the onsemi CD4052BCN datasheet, digital control inputs determine the selected path. The package can therefore route two separate analog buses or be used in a demultiplexing arrangement.
Where can I download the CD4052BCN datasheet PDF?
You can access the CD4052BCN datasheet through the onsemi document link listed on this page. The manufacturer datasheet is the controlling source for the complete pin description, address truth table, electrical characteristics, and operating limits. Use the package pinout and pin-description tables when assigning PCB tracks, especially because the CD4052BCN uses a 16-pin PDIP footprint.
Where can I find the CD4052BCN pinout?
The CD4052BCN uses a 16-pin PDIP package, and its numbered pin description should be taken from the manufacturer datasheet. This page links the CD4052BCN datasheet and identifies the package as 16-PDIP, but it does not reproduce a pin-number drawing because the verified technical material does not expose the individual pin names. Verify every connection against the datasheet before fabrication.
Is CD4052BCN suitable for analog signal multiplexing?
Yes, the CD4052BCN is designed for analog multiplexing and demultiplexing. Its 240-ohm ON resistance and very low OFF leakage current make it suitable for routing many low-frequency sensor, measurement, and control signals. For high-speed or high-impedance instrumentation, confirm bandwidth, capacitance, charge injection, and OFF isolation in the manufacturer datasheet before finalizing the design.
Can MC74HC4052ANG replace CD4052BCN?
MC74HC4052ANG is a candidate for evaluation because the documented comparison identifies it as a PDIP-16, 4-channel CMOS multiplexer, but package matching alone does not guarantee a drop-in replacement. Compare supply voltage, logic thresholds, ON resistance, leakage, switching time, and analog input limits before substitution. The manufacturer datasheets for both devices are required to complete that qualification.
What is the difference between CD4052BCN and CD4052BE?
CD4052BCN and CD4052BE both appear in the comparison results as PDIP-16 CMOS multiplexers, but they are offered by different manufacturers and may have different qualification, operating-temperature, and electrical limits. According to the manufacturer datasheets, the decisive checks are pin assignment, control logic, supply range, ON resistance, leakage, and signal handling. Confirm every parameter before using one as a drop-in replacement.
When should I choose CD4052BCN over a newer multiplexer?
Choose the CD4052BCN when a 16-PDIP, 4:1 CMOS multiplexer is required, the signal bandwidth is modest, and through-hole assembly simplifies prototyping or repair. A newer HC-series device may offer lower power consumption, faster switching, or different logic thresholds, but those advantages do not establish compatibility by themselves. Select the newer part only after verifying its footprint, supply voltage, and control levels.
Is CD4052BCN the same as MC74HC4052ANG?
No, the CD4052BCN and MC74HC4052ANG are related 4-channel CMOS multiplexer functions, but they are not automatically electrically identical. The comparison identifies both as PDIP-16 devices, while MC74HC4052ANG belongs to the HC logic family and may use different supply and control specifications. Review both manufacturer datasheets before treating it as a drop-in replacement.
What can replace the CD4052BCN?
CD4052BE and MC74HC4052ANG are the closest documented candidates because they are identified as PDIP-16 multiplexers with the same 4-channel form factor. They should be treated as qualified alternatives only after checking pinout, address logic, enable polarity, supply voltage, analog signal limits, ON resistance, leakage, and timing. A footprint-compatible part can still be electrically unsuitable.
Where can I buy CD4052BCN online?
Use the Request a Quote form on this page to ask for CD4052BCN availability, current lead time, and an order quotation for the exact 16-PDIP manufacturer part number. The listing confirms that CD4052BCN is cataloged by onsemi and by legacy-source inventory, but commercial status can change. Submit the target MPN and required quantity for a current response.
What is the price of CD4052BCN?
Request a current CD4052BCN quotation through the Request a Quote form on this page, including the required quantity and packaging preference. The verified listing contains a starting-price reference rather than a quantity-break table for the exact MPN, so it is not used as a structured price tier. The quote workflow provides current commercial terms without embedding a potentially stale price.
What is the lead time and stock status for CD4052BCN?
Request current CD4052BCN stock and lead-time confirmation through the Request a Quote form on this page. The CD4052BCN is listed by onsemi and appears in distributor catalogs, but catalog presence alone does not establish the quantity available for a specific order or its production date. State the required quantity, target date, and acceptable source condition in the request.
What are the key specifications of CD4052BCN that engineers should know?
The CD4052BCN is a dual 4:1 CMOS analog switch with 240-ohm ON resistance, digital channel selection, very low OFF leakage current, and a 16-pin PDIP package. According to the onsemi CD4052BCN datasheet, the device can operate as a multiplexer or demultiplexer. Its principal strengths are low channel resistance, simple digital addressing, and a through-hole package suitable for legacy and prototype boards.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা CD4052BCN — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the CD4052BCN when the design requires a dual 4:1 CMOS multiplexer in a 16-PDIP package and the signals are low frequency, with a documented 240-ohm ON resistance and very low OFF leakage. It is particularly suitable for through-hole instrumentation, data-acquisition, sensor-routing, and legacy test equipment. Consider CD4052BE when its manufacturer-specific electrical limits and qualification better match the target application, but verify every pin and parameter before substitution. Consider MC74HC4052ANG when an HC-family logic implementation is desirable, paying particular attention to supply voltage, control thresholds, switching speed, and analog signal limits. No alternative should be treated as drop-in solely because it uses PDIP-16. The final selection should preserve channel count, control polarity, operating-temperature range, analog signal capability, and system timing.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য CD4052BE MC74HC4052ANG
Brand onsemi Texas Instruments onsemi
Package 16-PDIP 16-PDIP 16-PDIP
Switch Configuration 4:1 4:1 4:1
Circuit Count 2 circuits 2 circuits 2 circuits
Technology CMOS CMOS CMOS
Control Type Digital Digital Digital
Mounting Type Through-hole Through-hole Through-hole

মূল পার্থক্যসমূহ

  • Documented 240-ohm ON resistance (বনামCD4052BE)
  • Dual 4:1 CMOS routing in a through-hole package (বনামMC74HC4052ANG)
  • Low OFF leakage with rated ON resistance (বনামCD4052BE)

ডিজাইন নোট

Route the selected analog output directly toward the receiving amplifier or converter and keep it short. The CD4052BCN has 240-ohm ON resistance, so long PCB traces can add capacitance and susceptibility to coupling. Maintain a continuous ground reference beneath the analog path, avoid switching high-current traces alongside the selected channel, and confirm settling behavior against the bandwidth of the signals being routed.

Separate the digital address and enable traces from the analog inputs and outputs, and keep the multiplexer close to the source of the signals it selects. Use the manufacturer pin-description and truth-table information when assigning the 16-PDIP footprint. Incorrect enable polarity or address ordering can select an unintended channel even when the PCB footprint is physically correct.

Do not assume that a PDIP-16 footprint proves electrical compatibility. Before replacing CD4052BCN with CD4052BE or MC74HC4052ANG, compare supply voltage, logic thresholds, enable polarity, analog input limits, ON resistance, leakage, and switching time using both manufacturer datasheets. The 240-ohm resistance and very low OFF leakage of the target are performance characteristics that should be checked rather than inferred from the channel count.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The verified CD4052BCN listings do not state RoHS, REACH, halogen-free, lead-free, conflict-minerals, or automotive qualification status. AEC-Q100 is not applicable to the catalogued commercial CD4052BCN configuration based on the absence of an automotive-qualified ordering designation.

ডেটা যাচাই করা হয়েছে: 2026-11-10 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

CD4052BCN datasheet CD4052BCN pinout CD4052BCN datasheet pdf CD4052BCN 16-PDIP CD4052BCN 240 ohm CD4052BCN equivalent CD4052BCN replacement CD4052BCN vs CD4052BE CD4052BCN price onsemi CD4052BCN CD4052BCN stock CD4052BCN analog multiplexer

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

onsemi CD4052BCN CD4052BE MC74HC4052ANG analog multiplexer analog demultiplexer analog switch CMOS CD4000 CMOS logic family 4:1 multiplexer interface IC signal selector ON resistance OFF leakage current 240 ohm digital address control 16-PDIP through-hole package sensor multiplexing data acquisition industrial control instrumentation legacy test equipment
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন