Texas Instruments

CD4052BMT - 20V 4:1 Analog Multiplexer | Texas Instruments

N.º da peça: CD4052BMT ✓ Ativo
20 V Vdss 240 ohm Rds(on) 16-SOIC Package
MOQ: 1 |

CD4052BMT Visão geral

Texas Instruments CD4052BMT is a 20 V, dual 4:1 analog multiplexer with logic-level conversion, packaged in a 16-SOIC. The device routes one of four analog signals to two independently controlled common terminals, supporting 240 ohm on-state resistance. Its CMOS implementation is designed for signal selection in applications where the analog input range extends to the supply voltage.

An analog multiplexer is a semiconductor switch that connects multiple signal paths to a common output. The CD4052BMT belongs to the analog switch and multiplexer hierarchy, where it can operate as either a multiplexer or a demultiplexer. In multiplexer mode, two select inputs determine which of four channels reaches each common terminal. In demultiplexer mode, one signal can be routed toward selected channel outputs. This makes the device useful for compact analog signal-distribution and selection systems.

The principal features include two 4:1 switching sections, a 20 V signal-handling capability, 240 ohm on-state resistance, and logic-level conversion for the address inputs. The two select inputs allow the device to address four positions across both sections. The 16-SOIC package provides a conventional surface-mount format suitable for industrial, instrumentation, communications, control, and test-and-measurement equipment where analog signals must be selected without introducing an active amplifier stage.

The CD4052B family uses CMOS switching structures to provide low off-state leakage and low quiescent current across the specified supply range. Because the common terminals can serve as inputs or outputs, one package can implement either signal selection or signal distribution without changing the basic PCB footprint. Designers should nevertheless verify signal amplitude, control-logic levels, package pin assignments, and off-state behavior against the manufacturer datasheet before applying the device to a new circuit.

Typical uses include multimeter input selection, sensor-channel multiplexing, control and measurement systems, communications routing, and analog signal conditioning. In a measurement system, the two common terminals can select paired signal groups, while the two address inputs select one of four channels. The 240 ohm on-state resistance is relevant when driving downstream circuitry, and it should be compared with the input impedance and bandwidth requirements of the next stage.

A critical design consideration is the relationship among the analog signal range, supply voltage, and negative supply used by the device. The analog signal must remain within the permitted operating limits, and unused inputs should be connected according to the manufacturer pin-description table. Because the control inputs provide logic-level conversion, their thresholds should be checked against the voltage levels of the controlling microcontroller or logic family.

This product page combines the manufacturer device description with application guidance, pinout-location information, drop-in replacement analysis, and a parameter-by-parameter comparison. It is designed to help engineers identify whether the CD4052BMT fits an existing 16-SOIC design and what must be revalidated when changing suppliers, operating voltage, or control logic.

Alternativas drop-in para CD4052BMT — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com CD4052BMT (mesmo formato e footprint) — diferindo em Package, Product Type.

Texas Instruments
Package: 16-pin SOIC
Product Type: CMOS analog multiplexer and demultiplexer
Comparar com CD4052BMT →

CD4052BM

✅ Drop-In
Texas Instruments
📦 16-SOIC
CMOS analog multiplexer and demultiplexer · 20 V maximum · 4:1, two channels · 2 circuits · 240 ohm · Supported · A, B, and inhibit · 16-pin SOIC

Consulte o preço

Ver ficha técnica →

MC14052BDG

✅ Drop-In
📦 16-SOIC
Retains the 4:1 dual-multiplexer function and 16-SOIC package; exact on-resistance, supply-range, and logic-threshold differences are .

📋 Alternativa de referência (fora do catálogo)

TMUX4052

✅ Drop-In
📦 16-SOIC
TI identifies upgraded functionality and drop-in behavior; the 4:1 topology is retained while exact on-resistance and control-logic differences are .

📋 Alternativa de referência (fora do catálogo)

CD4052BMT Especificações

Product Type Dual 4:1 analog multiplexer and demultiplexer
Maximum Signal Voltage 20 V
Number of Circuits 2 circuits
Multiplexer Configuration 4:1
On-State Resistance 240 ohm
Logic-Level Conversion Supported
Select Input Count 2 select inputs
Encapsulamento 16-SOIC
Tipo de montagem Surface mount
Technology CMOS
Configuração de saída 2-circuit, 4:1 multiplexer or demultiplexer

Guia de Configuração de Pinos do CD4052BMT 16-soic

Configuração de pinos para CD4052BMT (pacote 16-soic). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote 16-soic para CD4052BMT

Nenhum dado detalhado de pinagem disponível para CD4052BMT.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

CD4052BMT é adequado para 6 aplicaçãos: Multimeter Analog Input Selection, Industrial Sensor Channel Multiplexing, Communications Signal Routing, Test and Measurement Signal Distribution, Analog Control Signal Selection, Data Acquisition Front Ends.

🔧

Multimeter Analog Input Selection

The CD4052BMT fits a multimeter or laboratory measurement instrument that must connect one of several sensor or probe outputs to a common measurement amplifier. Its two 4:1 sections can select paired channels with only two address inputs, reducing the number of separate analog switches required. The 240 ohm on-state resistance is acceptable when the following amplifier has sufficiently high input impedance and bandwidth. Because the common terminals can operate as inputs or outputs, the same device can support measurement routing in either multiplexing or demultiplexing arrangements. The 16-SOIC package also simplifies replacement on an existing through-hole-style surface-mount layout.

🏭

Industrial Sensor Channel Multiplexing

The CD4052BMT is suitable for industrial control boards that must select signals from multiple temperature, pressure, or position sensors. The 20 V signal-handling capability accommodates many externally biased analog sensor outputs, while two 4:1 sections permit selection of two related inputs using a common pair of address lines. The 240 ohm on-resistance should be included in the source impedance calculation for the downstream amplifier or ADC. Logic-level conversion allows the select lines to be driven by a suitable control system, subject to the voltage thresholds and timing limits stated in the datasheet.

🌐

Communications Signal Routing

The CD4052BMT can route low-frequency analog communications or measurement signals in equipment that requires a compact four-position selector. Two select inputs establish one of four addresses, allowing the same control interface to operate both analog sections. The CMOS architecture and 240 ohm on-state resistance make it useful where a relay-based selector would be larger, slower, or less suitable for low-level signals. Design checks should include off-state isolation, leakage into adjacent channels, allowable input overvoltage, and the bandwidth required by the selected signal path.

📺

Test and Measurement Signal Distribution

The CD4052BMT is applicable in test equipment that distributes a common excitation or return signal among four instrument channels. One common terminal can carry the shared signal while the other common terminal provides an alternate routing path, enabling compact multiplexer or demultiplexer arrangements. Its 20 V class is useful for many low-energy measurement systems, while the 16-SOIC package supports automated board assembly. Validate the complete input-output impedance, leakage, settling time, and channel-isolation requirements before using it for precision reference or high-impedance measurements.

⚡

Analog Control Signal Selection

The CD4052BMT can select control, feedback, or setpoint signals in analog control systems where several sources must reach one processing amplifier. Its dual 4:1 organization supports two selected outputs from one four-position address code, which can simplify coordinated routing of a signal and its associated reference. The 240 ohm switch resistance must be considered alongside amplifier input bias current and cable capacitance. Control logic should remain within the specified thresholds, and external protection may be required if field-connected inputs can experience transients beyond the device's absolute maximum ratings.

🖥️

Data Acquisition Front Ends

The CD4052BMT is useful in data-acquisition front ends that multiplex several analog inputs ahead of an ADC or instrumentation amplifier. Two independent 4:1 sections can organize differential or paired channels while keeping control logic simple. The 240 ohm on-state resistance can create an RC network with source capacitance, so the resulting settling behavior must be checked against the acquisition timing requirement. The 20 V signal class supports many industrial measurement ranges, but the design must still comply with the specified supply voltages, control thresholds, and absolute maximum ratings.

Resumo dos produtos recomendados

CD4052B Texas Instruments Usado em: Multimeter Analog Input Selection, Industrial Sensor Channel Multiplexing, Test and Measurement Signal Distribution, Data Acquisition Front Ends TMUX4052 TI drop-in replacement with upgraded functionality Usado em: Multimeter Analog Input Selection, Communications Signal Routing, Analog Control Signal Selection MC14052BDG Alternative dual 4:1 SOIC multiplexer Usado em: Industrial Sensor Channel Multiplexing, Test and Measurement Signal Distribution, Data Acquisition Front Ends CD4052BM Texas Instruments Usado em: Communications Signal Routing, Analog Control Signal Selection
What is the CD4052BMT?
The CD4052BMT is a Texas Instruments CMOS analog multiplexer and demultiplexer with two 4:1 switching sections, a 20 V signal-handling rating, 240 ohm on-state resistance, and logic-level conversion. According to the TI product page, it is intended for routing analog signals in a 16-SOIC package. The two select inputs address four positions, while the two common terminals can support multiplexer or demultiplexer operation.
What is the operating voltage of CD4052BMT?
The CD4052BMT supports analog signals up to 20 V, according to the Texas Instruments CD4052B product page. Its exact positive and negative supply ranges, absolute maximum ratings, and allowable control-input levels must be taken from the manufacturer datasheet. The 20 V figure is the headline signal-handling capability and should not be treated as permission to exceed the specified supply-voltage limits.
Where can I download the CD4052BMT datasheet PDF?
The official CD4052BMT datasheet is available through the Texas Instruments literature link at https://www.ti.com/lit/gpn/cd4052b, and the family product information is at https://www.ti.com/product/CD4052B. The manufacturer datasheet is the controlling document for the exact pin description, electrical characteristics, absolute maximum ratings, and recommended operating conditions.
Where can I find the CD4052BMT pinout?
The CD4052BMT pinout is shown in the pin-configuration and pin-description tables of the Texas Instruments CD4052B datasheet. The device uses a 16-SOIC package with dedicated common terminals, channel terminals, select inputs, supply connections, and related power pins. Assign PCB tracks only after checking the pin table associated with the exact CD4052B ordering option.
Is the CD4052BMT a 4:1 multiplexer?
Yes, the CD4052BMT contains two independent 4:1 analog switching sections. According to the TI product page, it is a 20 V, 4:1, 2-channel analog multiplexer with logic-level conversion. Two select inputs control the selected channel, and the common terminals can be configured as signal inputs or outputs for multiplexing or demultiplexing.
What is the on-state resistance of CD4052BMT?
The CD4052BMT has a listed on-state resistance of 240 ohm in the Texas Instruments product description. This resistance must be considered when the mux feeds a high-impedance amplifier, sensor, ADC, or precision measurement network. Its effect on insertion loss and signal settling should be evaluated against the bandwidth and input impedance of the connected circuit.
What can replace the CD4052BMT?
The CD4052BM is a direct same-package family option identified in the CD4052BM-versus-CD4052BMT comparison, while MC14052BDG is a 16-SOIC dual 4:1 alternative identified in the cross-reference material. Texas Instruments also identifies TMUX4052 as a drop-in replacement with upgraded functionality, but its exact mechanical package and pin arrangement must be confirmed before substitution. Use the Request a Quote form on this page for sourcing assistance.
Is MC14052BDG a drop-in replacement for CD4052BMT?
MC14052BDG is a potential dual 4:1 replacement because the cross-reference material describes it as a DP4T analog multiplexer in an SOIC package. It is not a blanket substitute for every CD4052BMT design because supply voltage, logic thresholds, on-resistance, leakage, and electrical limits require comparison. Confirm pin assignments and all relevant parameters in the respective manufacturer datasheets before production use.
When should I choose CD4052BMT over TMUX4052?
Choose the CD4052BMT when a design specifically requires the established CD4052B function, its 20 V signal-handling class, and the exact 16-SOIC footprint already qualified in the design. Consider TMUX4052 when its upgraded functionality and logic compatibility better match the system, but verify its package option and pinout first. A functional replacement is not automatically a PCB drop-in replacement.
Is CD4052BMT suitable for a 12 V analog signal?
The CD4052BMT can handle analog signals up to 20 V according to the TI product description, making a 12 V signal potentially compatible with the signal range. The complete operating condition still depends on the supply voltages, control levels, signal current, temperature, and absolute maximum ratings in the datasheet. Confirm those conditions before connecting an external 12 V source to any channel.
Where to buy CD4052BMT online?
Use the Request a Quote form on this page to request CD4052BMT availability, current lead time, and an order quotation. The form provides a direct purchasing channel without embedding a static price that can become outdated. For technical validation, use the official TI product page and datasheet links on this page rather than relying on marketplace listing snippets.
What is the price of CD4052BMT?
Current CD4052BMT pricing is shown through the Request a Quote form on this page because quotations and availability can change with quantity, package format, and market conditions. The structured listings on this page do not contain an explicit quantity-break table for the exact MPN, so no static unit price is published here. Submit the desired quantity and packaging requirements through the quote form.
What is the lead time for CD4052BMT?
The current CD4052BMT lead time depends on factory inventory, order quantity, and the requested shipment destination. Request the latest allocation and lead-time information through the Request a Quote form on this page. The Texas Instruments product page is the appropriate reference for lifecycle status and official ordering information.
Is CD4052BMT in stock?
Stock status should be confirmed through the Request a Quote form on this page because availability changes with quantity and purchasing conditions. The Texas Instruments product page identifies CD4052BMT as an active family option, but active lifecycle status does not by itself guarantee immediate stock for a requested quantity. Include your required quantity and package format in the quote request.
What are the key specifications of CD4052BMT that engineers should know?
The key CD4052BMT specifications are its 20 V signal-handling capability, two 4:1 CMOS switching sections, 240 ohm on-state resistance, logic-level conversion, and 16-SOIC package. According to the TI product page, these features position it for analog routing where a low part count and conventional surface-mount assembly are priorities. Supply limits, timing, leakage, and temperature data require confirmation in the manufacturer datasheet.
Is CD4052BMT RoHS compliant and automotive qualified?
The RoHS, REACH, and AEC-Q100 status of CD4052BMT must be confirmed from the ordering information and declarations for the exact part number. This product record does not contain enough compliance evidence to label the device compliant, non-compliant, or AEC-Q100-qualified. Use the manufacturer product page and Request a Quote form to obtain the documentation required for procurement and qualification.

Dados de referência de engenharia para CD4052BMT — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose CD4052BMT for an established design that requires a 20 V-class, dual 4:1 analog multiplexer in a 16-SOIC package and already uses the CD4052B signal-routing architecture. It is particularly suitable when two channels must be selected together and the downstream circuit tolerates the stated 240 ohm on-state resistance. Choose CD4052BM when you want to remain within the same TI family and footprint. Consider MC14052BDG after checking its supply range, logic thresholds, leakage, timing, and pin descriptions against the CD4052BMT datasheet. Consider TMUX4052 when its upgraded functionality better matches the system, but verify that the selected ordering option uses the exact same mechanical package and pin arrangement. For any substitution, validate overvoltage, signal bandwidth, settling time, power rails, temperature range, and production availability before releasing the PCB.

Comparação com alternativas

Parâmetro Este produto CD4052BM MC14052BDG TMUX4052
Brand Texas Instruments Texas Instruments onsemi Texas Instruments
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Multiplexer Configuration 4:1 4:1 4:1 dual multiplexer 4:1
Number of Circuits 2 circuits 2 circuits 2 circuits 2 channels

Principais diferenciais

  • Established dual 4:1 routing in a standard 16-SOIC footprint (vs MC14052BDG)
  • Direct same-family option (vs CD4052BM)
  • Manufacturer-identified upgrade path (vs TMUX4052)

Notas de projeto

Verify the exact pin assignments and power connections in the manufacturer datasheet before laying out the PCB. The common terminals can function as inputs or outputs, so reversing the signal direction can change which pins require low-impedance routing and which act as address-controlled channels. Also confirm that every analog signal remains within the permitted input and supply ranges; the 20 V signal-handling rating must not be interpreted as permission to exceed the absolute maximum supply ratings.

Include the 240 ohm on-state resistance in the complete source-impedance budget for the selected channel. Together with connector, PCB, and receiver capacitance, it can create an RC low-pass response and lengthen settling time. For high-impedance sensors or precision measurements, compare the switch resistance with the amplifier input impedance and calculate the allowable settling interval before the next conversion or acquisition.

Route the two select lines as compact, consistently driven digital nets and keep sensitive analog channels away from long switching-current paths. The two multiplexed sections share address information, so adequate drive strength and clean logic levels are essential. Where the analog source is sensitive to charge injection or switching transients, add source impedance, filtering, or a suitable settling period and verify the result with the actual source and receiver impedances.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

Compliance declarations were not identified for the exact CD4052BMT ordering option. AEC-Q100 is treated as not applicable because this is not presented as an automotive-qualified device.

Dados verificados em: 2026-11-10 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

cd4052bm datasheet CD4052BMT datasheet CD4052BMT pinout CD4052BMT datasheet pdf CD4052BMT equivalent CD4052BMT replacement CD4052BMT cross reference CD4052BMT vs TMUX4052 CD4052BMT 16-SOIC pinout CD4052BMT analog multiplexer application CD4052BMT price CD4052BMT stock

Componentes & termos relacionados

Texas Instruments CD4052BMT CD4052B CD4052BM MC14052BDG onsemi TMUX4052 analog multiplexer analog demultiplexer analog switch multiplexer and demultiplexer interface IC semiconductor CMOS 4:1 multiplexer dual 4:1 switching section 20 V signal handling 240 ohm on-state resistance logic-level conversion select input 16-SOIC SOIC package family surface-mount technology analog signal routing data acquisition
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ