Texas Instruments

CD4060AF/3 - 14-Stage CMOS Counter | Texas Instruments

N.º da peça: CD4060AF/3 ✓ Ativo
3 V to 12 V Vdss 16-pin CDIP Package 4 MHz Speed
MOQ: 1 |

CD4060AF/3 Visão geral

The Texas Instruments CD4060AF/3 is a CMOS 14-stage ripple-carry binary counter and divider with an integrated oscillator, operating from 3 V to 12 V and supporting operation up to 4 MHz. The device is offered in a 16-pin CDIP package and counts on the falling edge. Its oscillator section can provide the clock source for a divider chain, while the 14 available binary outputs support frequency division, timing, and pulse-generation functions.

A CMOS ripple-carry counter is a sequential digital logic device that increments or decrements its binary state on each active clock edge. The CD4060 family combines this counter function with an oscillator and divider outputs in one integrated circuit. In the system hierarchy, it belongs to the CMOS logic family, within counters and dividers, and ultimately within integrated digital logic ICs. Its ability to derive multiple divided clocks from one oscillator reduces the number of separate timing components required in timer and waveform-generation circuits.

The principal features include 14 counter stages, a 4 MHz maximum operating frequency, a single counter element, falling-edge triggering, and a supply range of 3 V to 12 V. The RCA CD4060AF documentation describes a temperature range of -55°C to 125°C, making the family suitable for industrial and extended-temperature equipment where its qualification level permits. The counter also includes reset and oscillator-related terminals for initialization and clock-source control.

Internally, the ripple-carry architecture propagates each count transition through successive stages. Outputs from Q0 through Q9 are normally used for relatively high division ratios, while the later stages provide division by progressively larger powers of two. When the internal oscillator is used, its timing accuracy depends on the external resistor and capacitor network, component tolerance, temperature behavior, and stray capacitance. These characteristics distinguish the CD4060AF/3 from ordinary binary counters that require a separate clock generator.

Typical uses include digital timers, pulse generators, frequency dividers, delayed-event logic, clock qualification, and industrial control circuits. It is also useful as a frequency-divider stage in a larger timing chain because multiple binary outputs are available from the same package. When cascading counters, designers should account for propagation delay through the ripple stages and ensure that the downstream device has suitable setup and hold timing.

The principal design consideration is power-supply and clocking discipline. Place the supply bypass capacitor close to VDD and VSS, keep oscillator components close to OSC IN and OSC OUT, and avoid long traces around high-impedance timing nodes. The 3 V to 12 V operating range supports legacy CMOS systems, but modern designs must account for the absence of modern-level input overvoltage tolerance unless the manufacturer confirms otherwise.

This product page combines the CD4060AF/3 device identity, package information, operating limits, replacement considerations, application guidance, and practical implementation notes. It also identifies which technical attributes are established by the manufacturer documentation and which replacement details require comparison against the selected candidate's own datasheet.

Alternativas drop-in para CD4060AF/3 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

CD4060B-MIL

✅ Drop-In
📦 16-pin CDIP
Same 14-stage CMOS counter/divider and oscillator function in a 16-pin CDIP package; the -MIL ordering designation identifies a different qualification positioning from CD4060AF/3.

📋 Alternativa de referência (fora do catálogo)

CD4060AF

✅ Drop-In
📦 16-pin DIP
Same documented 16-terminal CMOS ripple-counter family and -55°C to 125°C temperature range; the candidate lacks the CD4060AF/3 ordering suffix, so exact grade and qualification must be confirmed.

📋 Alternativa de referência (fora do catálogo)

CD4060AF/3 Classificações máximas e características elétricas

Product Type CMOS 14-stage ripple-carry binary counter/divider and oscillator
Counter Stages 14 stages
Counter Element Count 1 element
Counting Mode Binary
Counting Edge Falling edge
Supply Voltage Range 3 V to 12 V
Maximum Operating Frequency 4 MHz
Tipo de saída 14-bit binary counter/divider output
Oscillator Integrated RC oscillator
Reset Function Asynchronous reset
Encapsulamento 16-pin CDIP
Terminal Count 16 terminals
Tipo de montagem Through-hole dual in-line
JEDEC Package Code R-XDIP-T16
Temperature Range -55°C to 125°C
Logic Family CMOS

Configuração de pinos do CD4060AF/3

DIP-16 Package Pinout Diagram DIP-16 16-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 DIP-16
Pino 1 CLK — Clock input for counter stage
Pino 2 CLK IN — External clock input
Pino 3 Q10 — Counter output
Pino 4 Q11 — Counter output
Pino 5 Q12 — Counter output
Pino 6 Q13 — Counter output
Pino 7 Q14 — Counter output
Pino 8 VSS — Ground supply terminal
Pino 9 OSC OUT — Oscillator output
Pino 10 OSC IN — Oscillator input
Pino 11 RESET — Counter reset input
Pino 12 Q0 — Counter output
Pino 13 Q1 — Counter output
Pino 14 Q2 — Counter output
Pino 15 Q3 — Counter output
Pino 16 VDD — Positive supply terminal

Aplicações típicas

CD4060AF/3 é adequado para 6 aplicaçãos: Industrial Timer and Delay Generator, Frequency Divider and Clock Qualification, Pulse and Tone Generation, Digital Logic Retiming, Test and Measurement Equipment, Embedded Sequential Control.

🏭

Industrial Timer and Delay Generator

The CD4060AF/3 fits industrial timer and delay circuits because it combines an oscillator with 14 stages of ripple-carry counting in one 16-pin CDIP package. An external resistor-capacitor network can establish the oscillator timing, and the counter outputs provide successive binary division points for delay selection. Operating from 3 V to 12 V with a 4 MHz maximum operating frequency supports conventional CMOS control systems. In operation, the timer can trigger discrete logic stages as the binary count progresses, reducing the number of separate cascaded flip-flops required. Designers should verify oscillator accuracy against the tolerance and temperature coefficient of the timing components and allow for ripple propagation delay when the output must switch a downstream device immediately.

🖥️

Frequency Divider and Clock Qualification

The CD4060AF/3 is appropriate for dividing a clock into lower-rate timing signals because its 14 ripple stages expose multiple binary division outputs. With operation up to 4 MHz, the device can process suitable CMOS clock signals while the 3 V to 12 V range supports legacy equipment rails. The divided outputs can gate counters, data-capture circuits, or sequential test functions without requiring a separate binary divider for every ratio. A key design consideration is the accumulated propagation delay through the ripple stages, which becomes more important when the downstream logic has short setup requirements. Confirm the input transition shape, output rise and fall times, supply level, and maximum clock frequency before treating the counter output as a clean replacement for a modern high-speed clock divider.

📡

Pulse and Tone Generation

The CD4060AF/3 can generate repetitive pulses or coarse timing waveforms by combining its internal oscillator with selected divider outputs. Its 14-stage binary count permits widely separated pulse rates to be selected without a bank of independent oscillators, and the 3 V to 12 V supply range matches conventional CMOS logic systems. In a pulse-generation circuit, one Q output provides the repetition signal while another output may serve as a delayed enable or synchronized pulse. Accuracy is set primarily by the external oscillator components and their behavior over temperature, not only by the nominal 4 MHz counter capability. Use the manufacturer oscillator guidance, observe output drive requirements, and ensure any connected CMOS load does not exceed the available output-current and capacitance limits.

🔧

Digital Logic Retiming

The CD4060AF/3 can provide coarse digital retiming when a system needs delayed transitions derived from an external clock. The falling-edge counting behavior allows an external event to advance the counter, while outputs become available at successive binary intervals. This approach is useful in legacy control, test, and sequencing equipment where a large number of timing taps would otherwise require separate delay logic. The device supports input frequencies up to 4 MHz, but each additional stage adds ripple delay, so critical outputs should be timed against the actual counter transitions rather than assumed to switch simultaneously. The 16-pin CDIP package supports through-hole construction and straightforward replacement in existing legacy boards, subject to exact pinout and qualification verification.

📺

Test and Measurement Equipment

The CD4060AF/3 is suitable for legacy test and measurement equipment that requires a compact clock divider, programmable delay, or repetitive trigger source. Multiple binary outputs allow several test points to observe related timing phases, and the integrated oscillator reduces the component count compared with a separate clock generator and divider. Its 3 V to 12 V operating range and 4 MHz maximum frequency align with classic CMOS test logic, while the 16-pin CDIP package facilitates use in existing through-hole fixtures. Measurement accuracy depends on the oscillator network and component tolerances. For instrumentation requiring calibrated frequency accuracy, calibrate the timing network against a reference and use Schmitt-trigger input conditioning where necessary to prevent false clock transitions.

⚡

Embedded Sequential Control

The CD4060AF/3 can act as a compact sequential-control element in legacy embedded systems, especially when a long timing sequence is needed from a small number of external outputs. Each counter transition advances the machine state, allowing different loads, relays, or data-capture stages to be activated at selected binary counts. The device's 14 counter stages and integrated oscillator simplify long-duration control sequences, while its 3 V to 12 V supply range supports older control voltage levels. Ripple delay should be included in the control timing budget because outputs change sequentially rather than simultaneously. Confirm reset polarity, oscillator startup behavior, output load, and transition timing in the target system before using the counter as the master sequencer for safety- or timing-critical operations.

Resumo dos produtos recomendados

CD4060B-MIL Same-family counter/divider candidate for qualified legacy timing designs Usado em: Industrial Timer and Delay Generator, Frequency Divider and Clock Qualification, Pulse and Tone Generation, Digital Logic Retiming, Test and Measurement Equipment, Embedded Sequential Control SN74LS93DR Texas Instruments Usado em: Industrial Timer and Delay Generator, Digital Logic Retiming SN74LS90DR Texas Instruments Usado em: Frequency Divider and Clock Qualification, Pulse and Tone Generation, Embedded Sequential Control SN74LS85DR Texas Instruments Usado em: Test and Measurement Equipment
What is the CD4060AF/3?
The CD4060AF/3 is a CMOS 14-stage ripple-carry binary counter, divider, and oscillator in a 16-pin CDIP package. According to the manufacturer datasheet, it operates from 3 V to 12 V, counts on the falling edge, and supports operation up to 4 MHz. The integrated oscillator can generate the count clock, while 14 binary outputs provide division ratios derived from the counter chain.
What is the operating voltage of CD4060AF/3?
The CD4060AF/3 operates from 3 V to 12 V, according to the CD4060AF/3 manufacturer datasheet. This range makes it suitable for conventional low-voltage CMOS timing systems. Designers should also verify signal-level compatibility, input overvoltage tolerance, and output rise and fall times for the particular supply voltage before connecting external clock or oscillator signals.
What is the maximum frequency of CD4060AF/3?
The CD4060AF/3 supports operation up to 4 MHz, as stated in the manufacturer datasheet. This rating describes the counter family's switching capability at suitable supply and load conditions. Maximum usable oscillator frequency can be lower because the RC network, parasitic capacitance, temperature, and output loading influence the internal timing behavior.
Where to download the CD4060AF/3 datasheet PDF?
The CD4060AF/3 datasheet PDF is available from the Texas Instruments document linked on this page at https://www.lcsc.com/datasheet/C3828055.pdf. Use the pin-description table, electrical-characteristics table, and oscillator application information when assigning PCB tracks or calculating RC timing values. Confirm that the document revision corresponds to the exact ordered suffix and package marking.
Where can I find the CD4060 pinout?
The CD4060AF/3 uses a 16-pin CDIP package, and its pin assignments are shown in the manufacturer datasheet. The standard CD4060 arrangement uses the clock and oscillator inputs at pins 1, 2, 10, and 9, supply pins 16 and 8, reset at pin 11, and the Q0 through Q14 outputs on the remaining numbered terminals. Use the datasheet pin-description table when laying out the PCB.
How does the CD4060AF/3 oscillator work?
The CD4060AF/3 includes an oscillator section that can serve as the counter clock source when an external clock is not used. According to the manufacturer datasheet, the oscillator uses external resistance and capacitance to set the frequency. The resulting value also depends on resistor and capacitor tolerances, temperature coefficients, propagation delay, and parasitic capacitance at the oscillator terminals.
Is CD4060AF/3 suitable for frequency division?
Yes, the CD4060AF/3 is designed for frequency division and timing applications. Its 14 ripple-counter stages provide binary outputs corresponding to division ratios from 2 through 16384, subject to the available output mapping and timing requirements. The manufacturer datasheet identifies the device as a 14-stage binary counter/divider with a maximum operating frequency of 4 MHz.
What can replace the CD4060AF/3?
The nearest documented replacement is the Texas Instruments CD4060B-MIL, which is also identified as a CMOS 14-stage ripple-carry binary counter/divider and oscillator. Before substitution, confirm its 16-pin package, pin assignments, supply range, temperature grade, frequency rating, reset behavior, and oscillator characteristics. The candidate should be qualified for the required operating environment rather than selected by function alone.
Can RCA CD4060AF replace the CD4060AF/3?
The RCA CD4060AF is a potentially relevant source-compatible alternative because it is also a 16-terminal dual in-line CMOS counter. Its documentation identifies a -55°C to 125°C range and a 16-pin package. A replacement must still be checked for the exact counter outputs, clock edge, oscillator connections, reset polarity, voltage limits, and grade designation of the CD4060AF/3.
CD4060AF/3 vs CD4060B-MIL: which is better for industrial timing?
The CD4060B-MIL is generally the more targeted choice for an industrial or military-oriented timing design because its product designation explicitly identifies the MIL product entry, while the CD4060AF/3 is the original Harris ordering code. The decisive criteria remain package, pinout, voltage range, frequency, temperature grade, and qualification. Review the CD4060B-MIL ordering table and datasheet before approving a drop-in substitution.
When should I choose CD4060AF/3 instead of a modern timer IC?
Choose the CD4060AF/3 when a legacy circuit specifically requires its 14-stage ripple divider, integrated oscillator, existing 16-pin CDIP footprint, or direct compatibility with an established design. A modern timer or counter may offer better accuracy, lower power consumption, or additional control features, but those advantages do not justify replacing the device without verifying pin compatibility and external circuitry.
Is the CD4060AF/3 a 14-bit counter?
The CD4060AF/3 is described as a 14-stage ripple-carry binary counter/divider and oscillator. Because the device has 16 physical pins, its package does not provide one dedicated output for every possible 14-bit combination; the useful Q0 through Q14 outputs are assigned across the counter stages. Consult the manufacturer pin-description table to determine which division ratios are externally accessible.
Where can I buy CD4060AF/3 and check its lead time?
Use the Request a Quote form on this page to request CD4060AF/3 availability, current lead time, minimum order quantity, and packaging details. The form is the appropriate channel for a legacy order code because stock and lifecycle status can change independently of the published technical documentation. Include the required CDIP package and manufacturer suffix when submitting the request.
What is the price of CD4060AF/3?
Use the Request a Quote form on this page for the current CD4060AF/3 price, stock, minimum order quantity, and lead time. Legacy order codes can have limited market availability, and a static price may not reflect the exact package, condition, and quantity required. The quote request allows the order details to be checked against current inventory and procurement conditions.
Is CD4060AF/3 in stock?
Current CD4060AF/3 inventory should be confirmed through the Request a Quote form on this page. Because this is a legacy Harris/RCA-family order code, availability may be limited and can differ by package, qualification grade, quantity, and shipment date. Submit the required quantity and target date so procurement can return an actionable availability response.
What are the key specifications of CD4060AF/3?
The CD4060AF/3 combines a 14-stage CMOS ripple-carry counter, integrated oscillator, and binary divider outputs in a 16-pin CDIP package. Key manufacturer-stated limits include a 3 V to 12 V supply range and a maximum operating frequency of 4 MHz, with falling-edge counting. The RCA CD4060AF documentation also identifies an extended temperature range of -55°C to 125°C.

Dados de referência de engenharia para CD4060AF/3 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the CD4060AF/3 when maintaining an existing 16-pin CDIP design that requires a 3 V to 12 V CMOS ripple counter, falling-edge counting, an integrated oscillator, and up to 4 MHz operation. It is particularly useful for legacy timers, dividers, pulse generators, and sequential-control circuits where changing the footprint would require board changes. Consider the Texas Instruments CD4060B-MIL when its qualification positioning and ordering details better match the target program, but verify all electrical limits and pin assignments before substitution. The RCA CD4060AF may suit an earlier-generation design because it uses the same 16-terminal DIP form, though its exact operating ratings and qualification must be confirmed. For new designs, compare a modern timer or counter as well; a modern IC may improve oscillator accuracy, power consumption, and control, but it is not automatically a drop-in replacement for a CD4060AF/3 footprint.

Comparação com alternativas

Parâmetro Este produto CD4060B-MIL CD4060AF
Brand Texas Instruments Texas Instruments RCA
Package 16-pin CDIP 16-pin CDIP 16-pin DIP
Product Function 14-stage ripple-carry binary counter/divider and oscillator 14-stage ripple-carry binary counter/divider and oscillator CMOS 16-bit binary counter family device

Principais diferenciais

  • Provides 14 division stages in one timing IC (vs CD4060B-MIL)
  • Uses a 16-terminal through-hole counter package (vs CD4060AF)
  • Documents a 4 MHz maximum operating frequency (vs CD4060AF)

Notas de projeto

Place the supply bypass capacitor as close as practical to the VDD and VSS terminals, and route the return current directly to the device ground. The 3 V to 12 V operating range does not remove the need for stable rail voltage because oscillator frequency, switching speed, and output thresholds depend on VDD. Check the counter's dynamic output current and total CMOS input load before adding fan-out, especially when several Q outputs drive another legacy CMOS gate.

Keep the external oscillator resistor and capacitor close to OSC IN and OSC OUT, and minimize the loop area of the timing network. Long PCB traces can add parasitic capacitance that changes the nominal oscillator frequency. If the oscillator must meet a calibrated tolerance, use tight-tolerance components, account for their temperature coefficients, and provide a ground plane that does not interrupt the oscillator's return path.

Do not treat every 14-bit counter value as available at a dedicated output, and do not assume all Q outputs change simultaneously. The 16-pin package exposes only 16 terminals, including power and control functions, and ripple transitions propagate through successive stages. Use the manufacturer pin-description table when assigning outputs and include accumulated propagation delay when driving a downstream latch, flip-flop, or pulse-capture circuit.

An external clock should have clean transitions and satisfy the device's input-level requirements at the selected supply voltage. Long interconnects can add ringing, coupling, or differential delay that produces an unintended extra edge. When replacing an existing CD4060AF/3, inspect the original clock source for asymmetric rise and fall times and preserve any series resistance or conditioning already used to protect the input.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The available device documentation identifies the CD4060AF/3 as a CMOS logic counter/divider and oscillator, but it does not establish RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. CD4060AF/3 is a general-purpose logic device rather than an automotive-qualified AEC-Q100 product.

Buscas relacionadas

cd4060 datasheet cd4060 pinout cd4060 circuit diagram CD4060AF/3 datasheet CD4060AF/3 pinout CD4060AF/3 datasheet pdf CD4060AF/3 oscillator circuit CD4060AF/3 drop-in replacement CD4060AF/3 equivalent CD4060AF/3 cross reference CD4060AF/3 price CD4060AF/3 stock Texas Instruments CD4060AF/3 CD4060AF/3 CDIP-16 footprint

Componentes & termos relacionados

Texas Instruments CD4060AF/3 CD4060B-MIL CD4060AF CD4060 Harris Corporation RCA CMOS ripple-carry counter binary counter counter/divider integrated oscillator digital logic IC falling-edge triggering 3 V to 12 V 4 MHz 16-pin CDIP dual in-line package through-hole mounting frequency division pulse generation industrial timing RoHS REACH
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ