CY8C3245LTI-163 50MHz 32KB PSoC 3 MCU | Infineon
N.º da peça: CY8C3245LTI-163 ✓ AtivoCY8C3245LTI-163 Visão geral
A PSoC 3 is a mixed-signal microcontroller that combines an embedded CPU with programmable analog and digital peripheral blocks on one integrated circuit. The PSoC family sits within the broader hierarchy of embedded control: PSoC 3 microcontroller → 8-bit 8051 core → programmable system-on-chip → microcontroller → integrated circuit. This integration allows designers to adapt peripheral behavior through firmware instead of relying entirely on a fixed collection of external components.
The CY8C3245LTI-163 provides 50 MHz operation, 32 kByte of flash organized as 32K by 8 bits, and 4 kByte of SRAM. Its 38 I/O pins support connections to sensors, actuators, communications circuits, and human-interface modules. The 1.71 V minimum operating voltage supports low-voltage embedded systems, while the 5.5 V maximum provides compatibility with common 5 V supply environments. The 68-QFN package also includes a thermal pad according to the package description, helping distribute heat through the PCB copper area.
The 8051 instruction set and PSoC programmable peripheral architecture make this device useful for compact embedded controllers that need both digital control and configurable analog functions. Infineon describes the device as operating from DC to 50 MHz, allowing firmware designers to balance processing activity and power consumption against clock requirements. Its flash memory provides on-chip firmware storage, while SRAM supports working memory and stack operations.
Typical applications include industrial control modules, sensor-conditioning systems, building automation controllers, compact user-interface boards, low-power IoT equipment, and embedded motor or actuator controllers. The 38 I/O pins are especially useful when a design must connect several discrete peripherals while maintaining a compact 8 mm by 8 mm footprint. Firmware can also use the PSoC peripheral blocks to implement functions such as timers, serial interfaces, analog conversions, and signal-generation tasks.
PCB implementation should preserve the exposed-pad connection and provide a continuous ground reference beneath the QFN. Follow the manufacturer’s pin-description table and package drawing when assigning tracks, test points, and programming signals. Keep sensitive analog routes away from fast digital edges and provide local bypass capacitance at the device power pins according to the manufacturer’s recommended application circuit.
This product page consolidates the manufacturer’s core device parameters, programming support information, package details, and engineering guidance. It also separates verified drop-in substitutions from related family devices, helping designers determine whether a PCB can be reused without assuming that a similar PSoC 3 part has identical peripherals, pin functions, or programming behavior.
Alternativas drop-in para CY8C3245LTI-163 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Nenhuma alternativa drop-in disponível para este produto.
Solicitar alternativasCY8C3245LTI-163 Classificações máximas e características elétricas
| Product Type | PSoC 3 programmable system-on-chip microcontroller |
| CPU Core | 8051 8-bit core |
| Maximum CPU Frequency | 50 MHz |
| Flash Memory | 32 kByte (32K x 8 bits) |
| SRAM | 4 kByte |
| Number of I/O Pins | 38 pins |
| Operating Voltage Range | 1.71 V to 5.5 V |
| Encapsulamento | 68-QFN, 8 mm x 8 mm |
| Package Type | Quad Flat No-Lead with exposed pad |
| Tipo de montagem | Surface mount |
| Programming Interface | ISP-SWD |
| Programming Support | Supported by Elnec device programmers and programming adapters |
Guia de Configuração de Pinos do CY8C3245LTI-163 quad flat no-lead with exposed pad
Configuração de pinos para CY8C3245LTI-163 (pacote quad flat no-lead with exposed pad). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para CY8C3245LTI-163.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
CY8C3245LTI-163 é adequado para 6 aplicaçãos: Industrial Sensor Conditioning, Building Automation Controller, Low-Power IoT Sensor Node, Embedded Motor and Actuator Control, Compact Human-Interface Module, Programmable Analog and Digital Control.
Industrial Sensor Conditioning
The CY8C3245LTI-163 fits industrial sensor-conditioning modules that require programmable signal handling in a compact package. Its PSoC 3 architecture combines an 8051 core operating up to 50 MHz with configurable analog and digital blocks, while 38 I/O pins provide connections for sensors, threshold inputs, indicators, and external control signals. The 1.71 V to 5.5 V operating range supports low-voltage sensor systems and common industrial signal levels. Firmware can allocate timer, serial-interface, and conversion resources through the PSoC configuration, reducing discrete control logic. Use the manufacturer’s recommended bypass and exposed-pad layout, and validate the full operating temperature range before deployment in production equipment.
Recomendado
Building Automation Controller
The CY8C3245LTI-163 is suitable for compact building-automation controllers that coordinate digital inputs, communications, status indicators, and actuator commands. Its 38 I/O pins give a controller room to connect multiple discrete sensors and switching stages without moving to a larger package. The 50 MHz 8051 core can support responsive control logic, and 32 kByte of flash accommodates firmware for sequencing, diagnostics, communication handling, and configuration storage. Its 4 kByte of SRAM supports buffers and working state for typical multi-peripheral control tasks. At a 1.71 V to 5.5 V supply range, the device can operate across low-energy sensor nodes and common powered building modules when the external interface voltage levels match.
Recomendado
Low-Power IoT Sensor Node
The CY8C3245LTI-163 can serve as the central controller in a compact IoT sensor node that must acquire measurements, process them locally, and manage a low-speed communications interface. Its PSoC 3 programmable architecture allows digital timers, serial functions, and analog resources to be configured in firmware, which helps reduce the need for separate logic devices. The 32 kByte flash stores application code and calibration data, while 4 kByte of SRAM handles packet buffers and sensor processing. A 50 MHz maximum clock provides performance margin for interrupt-driven work, although software should reduce the clock when the application permits. The 1.71 V minimum operating voltage is particularly useful for battery-derived designs, while the 5.5 V maximum supports higher-voltage sensor arrangements.
Recomendado
Embedded Motor and Actuator Control
The CY8C3245LTI-163 is well suited to compact actuator-control boards that coordinate position inputs, limit sensors, driver enables, and status feedback. Its 50 MHz 8051 core provides dedicated processing capacity for timing, state machines, fault handling, and communications, while 38 I/O pins reduce the need for external logic in multi-axis or distributed control designs. The PSoC 3 programmable peripheral blocks can be assigned to timers, serial interfaces, and signal functions needed by the control loop. Its 1.71 V to 5.5 V operating range supports low-voltage logic domains, but external driver stages may require separate supplies and level shifting. The QFN exposed pad and local decoupling must follow the manufacturer’s layout guidance.
Recomendado
Compact Human-Interface Module
The CY8C3245LTI-163 can implement compact human-interface modules containing buttons, indicators, displays, and serial configuration ports. Its 38 I/O pins support multiple discrete inputs and outputs, while the 50 MHz 8051 core allows responsive scanning and menu logic. Programmable PSoC peripherals can be assigned to timers, communications, and analog functions, enabling one device to consolidate several interface functions. The 32 kByte flash capacity is suitable for storing control code, interface configuration, and user settings, and 4 kByte of SRAM can support display and input buffers. The 68-QFN 8 mm by 8 mm package helps reduce board area, although exposed-pad soldering and pad-thermal performance are critical for reliable assembly.
Recomendado
Programmable Analog and Digital Control
The CY8C3245LTI-163 supports programmable analog-and-digital control designs where a fixed-function microcontroller would otherwise require additional logic or interface ICs. Its PSoC 3 architecture combines a 50 MHz 8051 processor with configurable peripheral resources, allowing design parameters to be established through firmware and device configuration. With 32 kByte of flash, 4 kByte of SRAM, and 38 I/O pins, the device can host acquisition, filtering, sequencing, and output control in one device. The 1.71 V to 5.5 V range provides broad supply flexibility across compact embedded systems. Before finalizing the design, consult the manufacturer’s configuration guide for available block counts, routing limitations, clock requirements, and the analog performance of each selected peripheral.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para CY8C3245LTI-163 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto |
|---|---|
| Package | 68-QFN, 8 mm x 8 mm |
| Brand | Infineon Technologies |
| CPU Core | 8-bit 8051 |
| Maximum CPU Frequency | 50 MHz |
| Flash Memory | 32 kByte |
| SRAM | 4 kByte |
| Number of I/O Pins | 38 pins |
| Operating Voltage Range | 1.71 V to 5.5 V |
| Programming Interface | ISP-SWD |
Principais diferenciais
- 50 MHz processing headroom for a compact 8-bit embedded controller (vs CY8C3865LTI-205)
- 32 kByte flash and 4 kByte SRAM in one PSoC 3 device (vs CY8C3665LTI-043)
- Compact exposed-pad package supports dense embedded boards (vs CY8C3445LTI-081)
Notas de projeto
Implement the 68-QFN footprint exactly as shown in the manufacturer package drawing, including the exposed-pad connection and paste pattern. Place the device so that its exposed pad connects to a low-impedance ground region with thermal-via connections where permitted. Avoid placing high-current return paths beneath sensitive analog inputs, and preserve adequate copper on all QFN perimeter lands to support repeatable reflow.
Use the manufacturer’s recommended power-pin decoupling arrangement and keep ceramic bypass capacitors physically close to the relevant supply and ground connections. The device supports a 1.71 V to 5.5 V operating range, but the allowable clock frequency and selected PSoC resources can vary with voltage. Validate timing and analog performance across the minimum and maximum supply conditions expected in the finished system.
Treat the exposed pad as a primary electrical and thermal feature rather than an optional ground connection. Use the pin-description table to distinguish supply, ground, programming, clock, reset, and general-purpose I/O functions before routing. Keep programming and debug access available on the assembled PCB, and follow the manufacturer’s guidance for signal integrity when connecting external clocks or sensitive analog inputs.
Do not treat a shared 68-QFN outline as proof that another PSoC 3 device is a drop-in replacement. Peripheral routing, pin multiplexing, interrupt numbers, clock trees, memory organization, and programming requirements may differ even when the flash density and package match. For the CY8C3245LTI-163 itself, use ISP-SWD programming support and verify the exact device identification and configuration before allowing production programming.
Informações de conformidade
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations are included in the available product information.