Infineon

CY8C3245LTI-163 50MHz 32KB PSoC 3 MCU | Infineon

MPN: CY8C3245LTI-163 ✓ فعال
1.71 V to 5.5 V Vdss 68-QFN, 8 mm x 8 mm Package 50 MHz Speed 32 kByte (32K x 8 bits) Memory
حداقل سفارش: 1 |

CY8C3245LTI-163 نمای کلی

The Infineon Technologies CY8C3245LTI-163 is an 8-bit PSoC 3 programmable system-on-chip microcontroller with a 50 MHz 8051 core, 32 kByte of flash memory, 4 kByte of SRAM, and 38 I/O pins, housed in a 68-QFN 8 mm by 8 mm package. Its operating voltage range is 1.71 V to 5.5 V.

A PSoC 3 is a mixed-signal microcontroller that combines an embedded CPU with programmable analog and digital peripheral blocks on one integrated circuit. The PSoC family sits within the broader hierarchy of embedded control: PSoC 3 microcontroller → 8-bit 8051 core → programmable system-on-chip → microcontroller → integrated circuit. This integration allows designers to adapt peripheral behavior through firmware instead of relying entirely on a fixed collection of external components.

The CY8C3245LTI-163 provides 50 MHz operation, 32 kByte of flash organized as 32K by 8 bits, and 4 kByte of SRAM. Its 38 I/O pins support connections to sensors, actuators, communications circuits, and human-interface modules. The 1.71 V minimum operating voltage supports low-voltage embedded systems, while the 5.5 V maximum provides compatibility with common 5 V supply environments. The 68-QFN package also includes a thermal pad according to the package description, helping distribute heat through the PCB copper area.

The 8051 instruction set and PSoC programmable peripheral architecture make this device useful for compact embedded controllers that need both digital control and configurable analog functions. Infineon describes the device as operating from DC to 50 MHz, allowing firmware designers to balance processing activity and power consumption against clock requirements. Its flash memory provides on-chip firmware storage, while SRAM supports working memory and stack operations.

Typical applications include industrial control modules, sensor-conditioning systems, building automation controllers, compact user-interface boards, low-power IoT equipment, and embedded motor or actuator controllers. The 38 I/O pins are especially useful when a design must connect several discrete peripherals while maintaining a compact 8 mm by 8 mm footprint. Firmware can also use the PSoC peripheral blocks to implement functions such as timers, serial interfaces, analog conversions, and signal-generation tasks.

PCB implementation should preserve the exposed-pad connection and provide a continuous ground reference beneath the QFN. Follow the manufacturer’s pin-description table and package drawing when assigning tracks, test points, and programming signals. Keep sensitive analog routes away from fast digital edges and provide local bypass capacitance at the device power pins according to the manufacturer’s recommended application circuit.

This product page consolidates the manufacturer’s core device parameters, programming support information, package details, and engineering guidance. It also separates verified drop-in substitutions from related family devices, helping designers determine whether a PCB can be reused without assuming that a similar PSoC 3 part has identical peripherals, pin functions, or programming behavior.

جایگزین‌های drop-in برای CY8C3245LTI-163 — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

هیچ جایگزین مستقیمی برای این محصول موجود نیست.

درخواست جایگزین

CY8C3245LTI-163 حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type PSoC 3 programmable system-on-chip microcontroller
CPU Core 8051 8-bit core
Maximum CPU Frequency 50 MHz
Flash Memory 32 kByte (32K x 8 bits)
SRAM 4 kByte
Number of I/O Pins 38 pins
Operating Voltage Range 1.71 V to 5.5 V
بسته‌بندی 68-QFN, 8 mm x 8 mm
Package Type Quad Flat No-Lead with exposed pad
نوع نصب Surface mount
Programming Interface ISP-SWD
Programming Support Supported by Elnec device programmers and programming adapters

راهنمای پیکربندی پین CY8C3245LTI-163 quad flat no-lead with exposed pad

پیکربندی پین برای CY8C3245LTI-163 (پکیج quad flat no-lead with exposed pad). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.

نمودار پین‌آوت پکیج quad flat no-lead with exposed pad برای CY8C3245LTI-163

داده پین‌آوت تفصیلی موجود نیست برای CY8C3245LTI-163.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

CY8C3245LTI-163 مناسب است برای 6 کاربردs: Industrial Sensor Conditioning, Building Automation Controller, Low-Power IoT Sensor Node, Embedded Motor and Actuator Control, Compact Human-Interface Module, Programmable Analog and Digital Control.

🏭

Industrial Sensor Conditioning

The CY8C3245LTI-163 fits industrial sensor-conditioning modules that require programmable signal handling in a compact package. Its PSoC 3 architecture combines an 8051 core operating up to 50 MHz with configurable analog and digital blocks, while 38 I/O pins provide connections for sensors, threshold inputs, indicators, and external control signals. The 1.71 V to 5.5 V operating range supports low-voltage sensor systems and common industrial signal levels. Firmware can allocate timer, serial-interface, and conversion resources through the PSoC configuration, reducing discrete control logic. Use the manufacturer’s recommended bypass and exposed-pad layout, and validate the full operating temperature range before deployment in production equipment.

🧩

Building Automation Controller

The CY8C3245LTI-163 is suitable for compact building-automation controllers that coordinate digital inputs, communications, status indicators, and actuator commands. Its 38 I/O pins give a controller room to connect multiple discrete sensors and switching stages without moving to a larger package. The 50 MHz 8051 core can support responsive control logic, and 32 kByte of flash accommodates firmware for sequencing, diagnostics, communication handling, and configuration storage. Its 4 kByte of SRAM supports buffers and working state for typical multi-peripheral control tasks. At a 1.71 V to 5.5 V supply range, the device can operate across low-energy sensor nodes and common powered building modules when the external interface voltage levels match.

📱

Low-Power IoT Sensor Node

The CY8C3245LTI-163 can serve as the central controller in a compact IoT sensor node that must acquire measurements, process them locally, and manage a low-speed communications interface. Its PSoC 3 programmable architecture allows digital timers, serial functions, and analog resources to be configured in firmware, which helps reduce the need for separate logic devices. The 32 kByte flash stores application code and calibration data, while 4 kByte of SRAM handles packet buffers and sensor processing. A 50 MHz maximum clock provides performance margin for interrupt-driven work, although software should reduce the clock when the application permits. The 1.71 V minimum operating voltage is particularly useful for battery-derived designs, while the 5.5 V maximum supports higher-voltage sensor arrangements.

🔧

Embedded Motor and Actuator Control

The CY8C3245LTI-163 is well suited to compact actuator-control boards that coordinate position inputs, limit sensors, driver enables, and status feedback. Its 50 MHz 8051 core provides dedicated processing capacity for timing, state machines, fault handling, and communications, while 38 I/O pins reduce the need for external logic in multi-axis or distributed control designs. The PSoC 3 programmable peripheral blocks can be assigned to timers, serial interfaces, and signal functions needed by the control loop. Its 1.71 V to 5.5 V operating range supports low-voltage logic domains, but external driver stages may require separate supplies and level shifting. The QFN exposed pad and local decoupling must follow the manufacturer’s layout guidance.

📺

Compact Human-Interface Module

The CY8C3245LTI-163 can implement compact human-interface modules containing buttons, indicators, displays, and serial configuration ports. Its 38 I/O pins support multiple discrete inputs and outputs, while the 50 MHz 8051 core allows responsive scanning and menu logic. Programmable PSoC peripherals can be assigned to timers, communications, and analog functions, enabling one device to consolidate several interface functions. The 32 kByte flash capacity is suitable for storing control code, interface configuration, and user settings, and 4 kByte of SRAM can support display and input buffers. The 68-QFN 8 mm by 8 mm package helps reduce board area, although exposed-pad soldering and pad-thermal performance are critical for reliable assembly.

⚡

Programmable Analog and Digital Control

The CY8C3245LTI-163 supports programmable analog-and-digital control designs where a fixed-function microcontroller would otherwise require additional logic or interface ICs. Its PSoC 3 architecture combines a 50 MHz 8051 processor with configurable peripheral resources, allowing design parameters to be established through firmware and device configuration. With 32 kByte of flash, 4 kByte of SRAM, and 38 I/O pins, the device can host acquisition, filtering, sequencing, and output control in one device. The 1.71 V to 5.5 V range provides broad supply flexibility across compact embedded systems. Before finalizing the design, consult the manufacturer’s configuration guide for available block counts, routing limitations, clock requirements, and the analog performance of each selected peripheral.

خلاصه محصولات پیشنهادی

CY8C3245LTI-163 Infineon استفاده‌شده در: Industrial Sensor Conditioning, Building Automation Controller, Low-Power IoT Sensor Node, Embedded Motor and Actuator Control, Compact Human-Interface Module, Programmable Analog and Digital Control CY8C3245LTI-163T Related PSoC 3 order variant استفاده‌شده در: Industrial Sensor Conditioning, Building Automation Controller, Low-Power IoT Sensor Node, Embedded Motor and Actuator Control, Compact Human-Interface Module, Programmable Analog and Digital Control
What are the key specifications of CY8C3245LTI-163 that engineers should know?
The CY8C3245LTI-163 combines a 50 MHz 8051 core, 32 kByte of flash, 4 kByte of SRAM, 38 I/O pins, and a 1.71 V to 5.5 V operating range in a 68-QFN package. According to Infineon’s CY8C32xxx product documentation, this PSoC 3 device integrates a programmable embedded architecture with digital and analog peripheral functions. It is therefore suited to compact embedded controllers that need flexible peripherals, moderate processing performance, and a low-profile 8 mm by 8 mm footprint.
What is the operating voltage range of CY8C3245LTI-163?
The CY8C3245LTI-163 operates from 1.71 V to 5.5 V. This range is identified in the manufacturer and distributor product parameters for the PSoC 3 device. The low minimum voltage supports compact, battery-operated embedded products, while the 5.5 V maximum covers common 5 V supply environments. Actual design margins depend on clock speed, peripherals, temperature, and the operating characteristics of the selected internal resources.
How much flash and SRAM does CY8C3245LTI-163 have?
The CY8C3245LTI-163 includes 32 kByte of flash and 4 kByte of SRAM. Infineon’s product information identifies the flash organization as 32K by 8 bits and the SRAM capacity as 4 kByte. Flash stores the executable firmware and configuration data, while SRAM provides working memory for stack operations, buffers, and runtime variables. The split between nonvolatile and volatile storage is important when sizing application code and dynamic memory requirements.
Where can I download the CY8C3245LTI-163 datasheet PDF?
The official CY8C3245LTI-163 product page provides access to the manufacturer datasheet and ordering information. According to Infineon’s CY8C32xx documentation, the package drawing, pin-description table, electrical characteristics, memory map, and programming information should be used during hardware and firmware development. Use the pin table when assigning PCB tracks because a QFN footprint alone does not establish that two devices are pin-compatible.
Where can I find the CY8C3245LTI-163 pinout?
The CY8C3245LTI-163 pinout is found in the pin-description table and package drawing within the manufacturer’s CY8C32xxx documentation. The device uses a 68-QFN 8 mm by 8 mm package with an exposed pad. Use the pin table to identify power, ground, programming, clock, reset, and general-purpose I/O connections, and preserve the exposed-pad land pattern required for electrical and thermal performance.
What can replace CY8C3245LTI-163?
No independently verified pin-to-pin drop-in replacement is established for the CY8C3245LTI-163. Related PSoC 3 parts can share the 68-QFN format, CPU family, or memory density while differing in clock rate, peripheral configuration, pin multiplexing, and programming requirements. Request a quote for the original MPN through the Request a Quote form on this page, and validate any proposed substitute against the manufacturer pin table, memory map, interrupt vector, and board-level power requirements.
Is CY8C3245LTI-163 the same as CY8C3245LTI-163T?
The CY8C3245LTI-163 and CY8C3245LTI-163T share the same base device designation and 68-QFN package, but the final order code distinguishes their packing form. According to distributor product information, both are PSoC 3 devices with an 8051 core, 32 kByte flash, 38 I/O pins, and a 1.71 V to 5.5 V supply range. Confirm the manufacturer ordering-information table before treating one as an assembly-compatible alternative for a specific PCB.
CY8C3245LTI-163 vs CY8C3865LTI-205: which is better for an embedded controller?
The CY8C3245LTI-163 is the safer selection when firmware has been developed specifically around a 50 MHz PSoC 3 configuration with 32 kByte flash, 4 kByte SRAM, and 38 I/O pins. The comparison information identifies the CY8C3865LTI-205 as another 68-QFN, 32 kByte-flash 8-bit MCU, but a shared package does not prove identical peripheral routing. Choose the alternative only after checking pin functions, clock limits, interrupt layout, memory organization, and programming requirements.
When should I choose CY8C3245LTI-163 over a similar PSoC 3 device?
Choose the CY8C3245LTI-163 when the design is already configured around its 50 MHz maximum clock, 32 kByte flash, 4 kByte SRAM, 38 available I/O pins, and 1.71 V to 5.5 V operating range. According to Infineon’s product documentation, its PSoC architecture supports programmable analog and digital functions. Switching to another PSoC 3 member is advisable only if the substitute offers verified pin compatibility and preserves every peripheral, interrupt, clock, and memory resource used by the firmware.
Is CY8C3245LTI-163 suitable for industrial sensor and control systems?
The CY8C3245LTI-163 is suitable for compact sensor and control systems that need 38 I/O pins, 1.71 V to 5.5 V operation, and programmable analog and digital functions. Infineon’s PSoC 3 documentation identifies a 50 MHz 8051 core, 32 kByte flash, and 4 kByte SRAM. The device can support sensing, conditioning, communications, and actuator-control tasks, although the final industrial suitability must be checked against the specified temperature range and applicable system requirements.
How is CY8C3245LTI-163 programmed?
The CY8C3245LTI-163 uses ISP-SWD programming, and programming support is listed by Elnec for this exact device. Infineon’s CY8C32xx documentation identifies the device as a programmable PSoC 3 with a 50 MHz 8051 core and configurable peripheral resources. Programmers should also confirm the required programming voltage, reset sequence, communication adapter, and firmware security configuration before using a particular production programming fixture.
What is the best cross-brand equivalent for CY8C3245LTI-163?
No cross-brand equivalent can be recommended as a verified drop-in replacement for the CY8C3245LTI-163. The device combines an 8051 core with the proprietary PSoC 3 programmable peripheral architecture, so a pin-compatible footprint and matching clock speed are insufficient to establish interchangeability. Any cross-brand candidate must preserve the 68-QFN pin assignments, 1.71 V to 5.5 V operating range, flash and SRAM organization, peripheral resources, and programming workflow.
Where can I buy CY8C3245LTI-163 online?
Use the Request a Quote form on this page to ask for CY8C3245LTI-163 availability, current commercial terms, and a shipment quotation. The exact manufacturer part number is CY8C3245LTI-163, and it is offered in a 68-QFN 8 mm by 8 mm package with 32 kByte flash, 4 kByte SRAM, and 38 I/O pins. Include the required packing form, quantity, and target delivery date in the request to avoid package or schedule mismatches.
What is the price of CY8C3245LTI-163?
Use the Request a Quote form on this page for the current CY8C3245LTI-163 quotation. Commercial pricing depends on quantity, packing form, component availability, and market conditions, and a static price figure can become stale. The technical configuration to quote is the 68-QFN device with a 50 MHz 8051 core, 32 kByte flash, 4 kByte SRAM, 38 I/O pins, and a 1.71 V to 5.5 V operating range.
What is the lead time and stock status for CY8C3245LTI-163?
Request current stock, minimum order quantity, and lead time for CY8C3245LTI-163 through the Request a Quote form on this page. Infineon’s product page confirms the device configuration and provides ordering information, while live inventory changes by quantity and packing form. For production planning, provide the required annual usage, forecast profile, approved packing option, and latest date by which components must arrive.

داده‌های مرجع مهندسی برای CY8C3245LTI-163 — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the CY8C3245LTI-163 when firmware is designed around its 50 MHz 8051 core, 32 kByte flash, 4 kByte SRAM, 38 I/O pins, and PSoC 3 programmable peripheral architecture. It is particularly appropriate for compact sensing, control, automation, and communications modules that need configurable mixed-signal functions without several separate logic devices. The related CY8C3245LTI-163T order code should be reviewed only for its packing form because it is not a functionally distinct platform. CY8C3865LTI-205, CY8C3665LTI-043, and CY8C3445LTI-081 appear in family-comparison information, but a shared 68-QFN format is not proof of pin-to-pin compatibility. Before replacing the target, compare peripheral assignments, interrupt structure, memory maps, clock limits, voltage requirements, and programming resources. For an unchanged PCB and firmware flow, the original MPN remains the lowest-risk selection.

مقایسه با جایگزین‌ها

پارامتر این محصول
Package 68-QFN, 8 mm x 8 mm
Brand Infineon Technologies
CPU Core 8-bit 8051
Maximum CPU Frequency 50 MHz
Flash Memory 32 kByte
SRAM 4 kByte
Number of I/O Pins 38 pins
Operating Voltage Range 1.71 V to 5.5 V
Programming Interface ISP-SWD

تفاوت‌های کلیدی

  • 50 MHz processing headroom for a compact 8-bit embedded controller (در مقابلCY8C3865LTI-205)
  • 32 kByte flash and 4 kByte SRAM in one PSoC 3 device (در مقابلCY8C3665LTI-043)
  • Compact exposed-pad package supports dense embedded boards (در مقابلCY8C3445LTI-081)

یادداشت‌های طراحی

Implement the 68-QFN footprint exactly as shown in the manufacturer package drawing, including the exposed-pad connection and paste pattern. Place the device so that its exposed pad connects to a low-impedance ground region with thermal-via connections where permitted. Avoid placing high-current return paths beneath sensitive analog inputs, and preserve adequate copper on all QFN perimeter lands to support repeatable reflow.

Use the manufacturer’s recommended power-pin decoupling arrangement and keep ceramic bypass capacitors physically close to the relevant supply and ground connections. The device supports a 1.71 V to 5.5 V operating range, but the allowable clock frequency and selected PSoC resources can vary with voltage. Validate timing and analog performance across the minimum and maximum supply conditions expected in the finished system.

Treat the exposed pad as a primary electrical and thermal feature rather than an optional ground connection. Use the pin-description table to distinguish supply, ground, programming, clock, reset, and general-purpose I/O functions before routing. Keep programming and debug access available on the assembled PCB, and follow the manufacturer’s guidance for signal integrity when connecting external clocks or sensitive analog inputs.

Do not treat a shared 68-QFN outline as proof that another PSoC 3 device is a drop-in replacement. Peripheral routing, pin multiplexing, interrupt numbers, clock trees, memory organization, and programming requirements may differ even when the flash density and package match. For the CY8C3245LTI-163 itself, use ISP-SWD programming support and verify the exact device identification and configuration before allowing production programming.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations are included in the available product information.

تاریخ تأیید داده‌ها: 2026-11-19 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

CY8C3245LTI-163 datasheet CY8C3245LTI-163 pinout CY8C3245LTI-163 datasheet pdf CY8C3245LTI-163 specifications CY8C3245LTI-163 equivalent CY8C3245LTI-163 replacement CY8C3245LTI-163 cross reference CY8C3245LTI-163 vs CY8C3865LTI-205 Infineon CY8C3245LTI-163 CY8C3245LTI-163 68-QFN pinout CY8C3245LTI-163 price CY8C3245LTI-163 stock

قطعات و اصطلاحات مرتبط

Infineon Technologies Cypress Semiconductor CY8C3245LTI-163 CY8C3245LTI-163T CY8C3865LTI-205 CY8C3665LTI-043 CY8C3445LTI-081 PSoC 3 programmable system-on-chip 8051 core 8-bit microcontroller mixed-signal microcontroller embedded controller 50 MHz 32 kByte flash 4 kByte SRAM 38 I/O pins 1.71 V to 5.5 V 68-QFN QFN family surface mount ISP-SWD industrial control IoT sensor node
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ