DP83815DUJB/NOPB - 10/100 Ethernet PCI Controller | TI
N.º da peça: DP83815DUJB/NOPB ✗ Fim de vidaDP83815DUJB/NOPB Visão geral
An Ethernet controller is an interface IC that connects a host computer or embedded system to a physical network. The DP83815 combines the MAC, PCI bus interface, and Ethernet PHY in one device, placing it within the hierarchy of network interface controller, interface IC, and semiconductor. Its integrated design reduces the number of components required by a PCI motherboard, network adapter, or embedded controller while supporting both 10BASE-T and 100BASE-T links.
Key features include IEEE 802.3 compliance, bus-master burst transfers of up to 128 dwords or 512 bytes, PC 97 and PC 98 BIU compatibility, VLAN support, long-frame support, and full-duplex IEEE 802.3x flow control. Its operating supply range is 3 V to 3.6 V, with a listed supply current of 170 mA. The commercial-temperature version operates from 0 C to +70 C.
The integrated architecture separates host communication from packet movement through the PCI bus-mastering interface. Descriptors identify buffers, while the bus interface transfers packet data directly into system memory. This architecture reduces host CPU involvement compared with a non-mastering network interface and supports the throughput requirements of 100 Mb/s Fast Ethernet. The physical layer provides the 10/100 Mb/s copper-Ethernet connection without requiring a separate PHY in the intended motherboard design.
Typical applications include legacy and embedded PCI motherboards, PCI Ethernet adapter cards, industrial embedded systems, and other host systems that require a dedicated 10/100 Mb/s copper-network port. Because the controller implements the PCI V2.2 interface rather than a modern PCI Express interface, it is primarily appropriate for designs that retain a parallel PCI bus.
Designers should confirm PCI bus timing, the 3 V to 3.6 V supply requirement, magnetics selection, and the PCB layout for the 160-ball NFBGA before committing the layout. The manufacturer datasheet and its recommended application circuit are the controlling references for ball assignments, decoupling, impedance-controlled differential pairs, and isolation requirements.
This page combines the controller's Ethernet, PCI, power, environmental, and package characteristics with application guidance, direct-replacement constraints, and design considerations that help engineers determine whether the legacy PCI architecture remains appropriate for a new embedded platform.
Alternativas drop-in para DP83815DUJB/NOPB — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com DP83815DUJB/NOPB (mesmo formato e footprint) — diferindo em Ethernet Data Rate, Flow Control, Host Interface, Operating Temperature Range, Package.
DP83815DUJB
✅ Drop-InConsulte o preço
Ver ficha técnica →DP83815DUJB/NOPB Especificações
| Product Type | Integrated PCI Ethernet media access controller and physical layer |
| Ethernet Data Rate | 10 Mb/s and 100 Mb/s |
| Host Interface | PCI V2.2 |
| PCI Clock Frequency | 33 MHz |
| Maximum Bus-Master Burst Size | 128 dwords (512 bytes) |
| Ethernet Standard | IEEE 802.3 |
| Flow Control | IEEE 802.3x full duplex |
| VLAN Support | Supported |
| Long Frame Support | Supported |
| BIU Compatibility | PC 97 and PC 98 |
| Supply Voltage Range | 3 V to 3.6 V |
| Corrente de alimentação | 170 mA |
| Faixa de temperatura de operação | 0 C to +70 C |
| Encapsulamento | 160-pin NFBGA (NZG), 15 x 15 mm |
| Tipo de montagem | Surface mount |
| Bus Mastering | Supported |
| Status RoHS | Unknown |
| REACH Status | Unknown |
| AEC-Q100 Qualification | Not applicable |
Guia de Configuração de Pinos do DP83815DUJB/NOPB 160-pin nfbga (nzg), 15 x 15 mm
Configuração de pinos para DP83815DUJB/NOPB (pacote 160-pin nfbga (nzg), 15 x 15 mm). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.
Nenhum dado detalhado de pinagem disponível para DP83815DUJB/NOPB.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
DP83815DUJB/NOPB é adequado para 6 aplicaçãos: Legacy PCI Motherboard Networking, PCI Ethernet Adapter Card, Embedded Industrial System, Network Equipment Management Port, Instrumentation Data Link, Legacy PCI Computer Platform.
Legacy PCI Motherboard Networking
The DP83815DUJB/NOPB is appropriate for a PCI motherboard that needs a dedicated 10/100 Mb/s copper-Ethernet port. Its integrated MAC, physical layer, and PCI V2.2 interface reduce the number of separate network components on the board. Bus mastering allows packet descriptors and data to move directly into host memory, reducing CPU processing compared with a non-mastering interface. The 33 MHz PCI bus and IEEE 802.3x flow-control support fit legacy platform architectures. Because the controller is end-of-life, it is most appropriate for maintaining an existing motherboard design or using an assembled board under a controlled lifecycle plan.
Recomendado
PCI Ethernet Adapter Card
A PCI network adapter can use the DP83815DUJB/NOPB to provide 10 Mb/s and 100 Mb/s Ethernet over a copper cable. The integrated physical layer supports IEEE 802.3 operation, while VLAN tagging, long-frame handling, and full-duplex flow control address common adapter-card requirements. Its bus-master capability supports packet-buffer transfers of up to 128 dwords, or 512 bytes, reducing host-side descriptor overhead. The 160-pin NFBGA requires a dense PCB layout with careful routing of the PCI and Ethernet signals. Legacy adapters should also validate driver support against the host operating system before production release.
Recomendado
Embedded Industrial System
The DP83815DUJB/NOPB can serve an embedded host that retains a parallel PCI bus and requires a copper Ethernet connection. The controller operates from a 3 V to 3.6 V supply and is specified over 0 C to +70 C, making it applicable to controlled commercial or industrial enclosure environments. Its integrated PHY simplifies the board architecture compared with a separated MAC and transceiver design. Bus mastering offloads packet movement to system memory, which is useful when the host processor has limited processing bandwidth. Thermal design, environmental qualification, and driver availability must be checked separately for the completed embedded product.
Recomendado
Network Equipment Management Port
A legacy PCI-based network appliance can use the DP83815DUJB/NOPB for a management or service Ethernet port at 10 or 100 Mb/s. The MAC/PHY integration supports IEEE 802.3 traffic handling, VLAN support, long frames, and full-duplex flow control for management traffic. The bus-master interface transfers packet data without requiring every byte to pass through a CPU-managed interrupt routine. The solution is best suited to existing equipment where adding a PCI-compatible port is simpler than redesigning the host interface. Because the controller is end-of-life, it should not be introduced into a new platform unless long-term supply and driver support are secured.
Recomendado
Instrumentation Data Link
The DP83815DUJB/NOPB can provide a 100 Mb/s Fast Ethernet data path in PCI-based measurement or instrumentation equipment. Its dedicated MAC and physical layer isolate network traffic processing from the instrument's measurement functions, while the bus-master interface transfers packet buffers into host memory. IEEE 802.3x flow control can help manage congestion between the controller and host. The 3 V to 3.6 V operating range and 0 C to +70 C specification fit controlled indoor equipment. System integrators should use the manufacturer reference layout for Ethernet magnetics, differential routing, and decoupling, and should verify the host's driver and operating-system support.
Recomendado
Legacy PCI Computer Platform
The DP83815DUJB/NOPB is suited to a legacy PCI computer platform that requires network connectivity without adopting a modern PCI Express controller. It implements the PCI V2.2 interface at 33 MHz and uses bus mastering to transfer packet descriptors and data. Compatibility with PC 97 and PC 98 BIU requirements supports integration into older motherboard concepts. The controller provides both 10 Mb/s and 100 Mb/s operation, allowing the system to use common copper-Ethernet infrastructure. A production redesign should account for the controller's end-of-life status, operating-system driver availability, and the engineering effort required to retain a parallel PCI interface.
Recomendado
Dados de referência de engenharia para DP83815DUJB/NOPB — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Notas de projeto
Use the manufacturer datasheet and recommended layout as the authority for the 160-ball NFBGA footprint, ball assignments, and component placement. Place all required decoupling capacitors at their associated supply pins with short, low-inductance connections. Preserve the specified Ethernet differential trace geometry and separation from noisy switching nodes; deviations can degrade signal integrity or electromagnetic performance.
Design the 3 V to 3.6 V rail to support the listed 170 mA supply current while accounting for local high-frequency transients. Provide the input and output capacitance specified by the manufacturer datasheet, and keep the supply return path continuous through the BGA ground balls. Do not substitute a lower-voltage rail because Ethernet magnetics and external circuitry may introduce additional constraints beyond the controller's own supply range.
Do not treat DP83822IRHBR or another Ethernet controller as a board-level substitution for the DP83815DUJB/NOPB. The target uses a 160-pin NFBGA and a parallel PCI V2.2 interface, so changing the device can require new PCB artwork, host drivers, and software support. Validate footprint, signal mapping, voltage, clocking, and driver compatibility independently before any redesign.
Route heat through the BGA thermal arrangement and copper planes described by the manufacturer layout guidance. Keep dense power circuitry away from areas that require thermal-sensitive routing where practical. Actual junction temperature depends on supply voltage, ambient temperature, load activity, PCB copper, airflow, and neighboring heat sources, so calculate the completed-board thermal margin rather than relying on the commercial 0 C to +70 C rating alone.
Informações de conformidade
The device is a commercial 0 C to +70 C Ethernet controller. Current environmental, lead-free, halogen-free, and conflict-minerals declarations are not established by the available technical records.