УВЕДОМЛЕНИЕ О ПОСЛЕДНЕЙ ЗАКУПКЕ: DP83815DUJB/NOPB приближается к снятию с производства. Последняя дата заказа: Свяжитесь с нами. Смотреть доступные аналоги →
Texas Instruments

DP83815DUJB/NOPB - 10/100 Ethernet PCI Controller | TI

Артикул: DP83815DUJB/NOPB ✗ Снят с производства
3 V to 3.6 V Vdss 170 mA Id 160-pin NFBGA (NZG), 15 x 15 mm Package 33 MHz Speed
MOQ: 1 |

DP83815DUJB/NOPB Обзор

Texas Instruments DP83815DUJB/NOPB is a single-chip 10/100 Mb/s Ethernet controller for the PCI bus, integrating a PCI media access controller, bus interface unit, and physical layer in a 160-pin NFBGA (NZG) package measuring 15 x 15 mm. It supports 10 Mb/s Ethernet and 100 Mb/s Fast Ethernet, implements the PCI V2.2 interface at 33 MHz, and uses bus mastering to transfer packet descriptors and data.

An Ethernet controller is an interface IC that connects a host computer or embedded system to a physical network. The DP83815 combines the MAC, PCI bus interface, and Ethernet PHY in one device, placing it within the hierarchy of network interface controller, interface IC, and semiconductor. Its integrated design reduces the number of components required by a PCI motherboard, network adapter, or embedded controller while supporting both 10BASE-T and 100BASE-T links.

Key features include IEEE 802.3 compliance, bus-master burst transfers of up to 128 dwords or 512 bytes, PC 97 and PC 98 BIU compatibility, VLAN support, long-frame support, and full-duplex IEEE 802.3x flow control. Its operating supply range is 3 V to 3.6 V, with a listed supply current of 170 mA. The commercial-temperature version operates from 0 C to +70 C.

The integrated architecture separates host communication from packet movement through the PCI bus-mastering interface. Descriptors identify buffers, while the bus interface transfers packet data directly into system memory. This architecture reduces host CPU involvement compared with a non-mastering network interface and supports the throughput requirements of 100 Mb/s Fast Ethernet. The physical layer provides the 10/100 Mb/s copper-Ethernet connection without requiring a separate PHY in the intended motherboard design.

Typical applications include legacy and embedded PCI motherboards, PCI Ethernet adapter cards, industrial embedded systems, and other host systems that require a dedicated 10/100 Mb/s copper-network port. Because the controller implements the PCI V2.2 interface rather than a modern PCI Express interface, it is primarily appropriate for designs that retain a parallel PCI bus.

Designers should confirm PCI bus timing, the 3 V to 3.6 V supply requirement, magnetics selection, and the PCB layout for the 160-ball NFBGA before committing the layout. The manufacturer datasheet and its recommended application circuit are the controlling references for ball assignments, decoupling, impedance-controlled differential pairs, and isolation requirements.

This page combines the controller's Ethernet, PCI, power, environmental, and package characteristics with application guidance, direct-replacement constraints, and design considerations that help engineers determine whether the legacy PCI architecture remains appropriate for a new embedded platform.

Аналоги без доработки для DP83815DUJB/NOPB — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с DP83815DUJB/NOPB (тот же форм-фактор и посадочное место) — отличается по Ethernet Data Rate, Flow Control, Host Interface, Operating Temperature Range, Package.

Texas Instruments
Ethernet Data Rate: 10 Mbps or 100 Mbps
Flow Control: IEEE 802.3x full-duplex flow control
Host Interface: PCI

DP83815DUJB

✅ Прямая замена
Texas Instruments
📦 160-LBGA (15 x 15 mm)
Integrated PCI Ethernet Media Access Controller and Physical Layer · 10 Mbps or 100 Mbps · 10BASE-T and 100BASE-TX · PCI · 3 V to 3.6 V · 170 mA · 0 °C to +70 °C · 160-LBGA, 15 mm x 15 mm

Уточнить цену

Открыть даташит →

DP83815DUJB/NOPB Характеристики

Product Type Integrated PCI Ethernet media access controller and physical layer
Ethernet Data Rate 10 Mb/s and 100 Mb/s
Host Interface PCI V2.2
PCI Clock Frequency 33 MHz
Maximum Bus-Master Burst Size 128 dwords (512 bytes)
Ethernet Standard IEEE 802.3
Flow Control IEEE 802.3x full duplex
VLAN Support Supported
Long Frame Support Supported
BIU Compatibility PC 97 and PC 98
Supply Voltage Range 3 V to 3.6 V
Ток потребления 170 mA
Диапазон рабочих температур 0 C to +70 C
Корпус 160-pin NFBGA (NZG), 15 x 15 mm
Тип монтажа Surface mount
Bus Mastering Supported
Статус RoHS Unknown
REACH Status Unknown
AEC-Q100 Qualification Not applicable

Руководство по цоколевке DP83815DUJB/NOPB в корпусе 160-pin nfbga (nzg), 15 x 15 mm

Цоколевка для DP83815DUJB/NOPB (корпус 160-pin nfbga (nzg), 15 x 15 mm). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.

Схема цоколевки корпуса 160-pin nfbga (nzg), 15 x 15 mm для DP83815DUJB/NOPB

Нет подробных данных о распиновке для DP83815DUJB/NOPB.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

DP83815DUJB/NOPB подходит для 6 применениеs: Legacy PCI Motherboard Networking, PCI Ethernet Adapter Card, Embedded Industrial System, Network Equipment Management Port, Instrumentation Data Link, Legacy PCI Computer Platform.

🖥️

Legacy PCI Motherboard Networking

The DP83815DUJB/NOPB is appropriate for a PCI motherboard that needs a dedicated 10/100 Mb/s copper-Ethernet port. Its integrated MAC, physical layer, and PCI V2.2 interface reduce the number of separate network components on the board. Bus mastering allows packet descriptors and data to move directly into host memory, reducing CPU processing compared with a non-mastering interface. The 33 MHz PCI bus and IEEE 802.3x flow-control support fit legacy platform architectures. Because the controller is end-of-life, it is most appropriate for maintaining an existing motherboard design or using an assembled board under a controlled lifecycle plan.

🌐

PCI Ethernet Adapter Card

A PCI network adapter can use the DP83815DUJB/NOPB to provide 10 Mb/s and 100 Mb/s Ethernet over a copper cable. The integrated physical layer supports IEEE 802.3 operation, while VLAN tagging, long-frame handling, and full-duplex flow control address common adapter-card requirements. Its bus-master capability supports packet-buffer transfers of up to 128 dwords, or 512 bytes, reducing host-side descriptor overhead. The 160-pin NFBGA requires a dense PCB layout with careful routing of the PCI and Ethernet signals. Legacy adapters should also validate driver support against the host operating system before production release.

🏭

Embedded Industrial System

The DP83815DUJB/NOPB can serve an embedded host that retains a parallel PCI bus and requires a copper Ethernet connection. The controller operates from a 3 V to 3.6 V supply and is specified over 0 C to +70 C, making it applicable to controlled commercial or industrial enclosure environments. Its integrated PHY simplifies the board architecture compared with a separated MAC and transceiver design. Bus mastering offloads packet movement to system memory, which is useful when the host processor has limited processing bandwidth. Thermal design, environmental qualification, and driver availability must be checked separately for the completed embedded product.

🔧

Network Equipment Management Port

A legacy PCI-based network appliance can use the DP83815DUJB/NOPB for a management or service Ethernet port at 10 or 100 Mb/s. The MAC/PHY integration supports IEEE 802.3 traffic handling, VLAN support, long frames, and full-duplex flow control for management traffic. The bus-master interface transfers packet data without requiring every byte to pass through a CPU-managed interrupt routine. The solution is best suited to existing equipment where adding a PCI-compatible port is simpler than redesigning the host interface. Because the controller is end-of-life, it should not be introduced into a new platform unless long-term supply and driver support are secured.

📡

Instrumentation Data Link

The DP83815DUJB/NOPB can provide a 100 Mb/s Fast Ethernet data path in PCI-based measurement or instrumentation equipment. Its dedicated MAC and physical layer isolate network traffic processing from the instrument's measurement functions, while the bus-master interface transfers packet buffers into host memory. IEEE 802.3x flow control can help manage congestion between the controller and host. The 3 V to 3.6 V operating range and 0 C to +70 C specification fit controlled indoor equipment. System integrators should use the manufacturer reference layout for Ethernet magnetics, differential routing, and decoupling, and should verify the host's driver and operating-system support.

💻

Legacy PCI Computer Platform

The DP83815DUJB/NOPB is suited to a legacy PCI computer platform that requires network connectivity without adopting a modern PCI Express controller. It implements the PCI V2.2 interface at 33 MHz and uses bus mastering to transfer packet descriptors and data. Compatibility with PC 97 and PC 98 BIU requirements supports integration into older motherboard concepts. The controller provides both 10 Mb/s and 100 Mb/s operation, allowing the system to use common copper-Ethernet infrastructure. A production redesign should account for the controller's end-of-life status, operating-system driver availability, and the engineering effort required to retain a parallel PCI interface.

What is the DP83815DUJB/NOPB?
The DP83815DUJB/NOPB is a Texas Instruments integrated PCI Ethernet controller that combines a 10/100 Mb/s MAC, PCI V2.2 bus interface, and Ethernet physical layer. According to the manufacturer datasheet, it is intended for PCI motherboards, adapter cards, and embedded systems. The device is packaged in a 160-pin NFBGA (NZG) measuring 15 x 15 mm.
What Ethernet speeds does DP83815DUJB/NOPB support?
The DP83815DUJB/NOPB supports both 10 Mb/s Ethernet and 100 Mb/s Fast Ethernet through its integrated physical layer. Its Ethernet functions comply with IEEE 802.3, and the controller also supports IEEE 802.3x full-duplex flow control. The manufacturer datasheet describes the device as a single-chip 10/100 Mb/s solution.
What bus interface is built into DP83815DUJB/NOPB?
The DP83815DUJB/NOPB implements a 33 MHz PCI V2.2 interface for communication with the host system. It supports bus mastering with burst transfers as large as 128 dwords, or 512 bytes. The datasheet also identifies compatibility with PC 97 and PC 98 Bus Interface Unit requirements.
Where can I download the DP83815DUJB/NOPB datasheet PDF?
The official DP83815 datasheet PDF is available from the Texas Instruments product page at https://www.ti.com/lit/ds/symlink/dp83815.pdf. It is the controlling document for electrical characteristics, timing, PCI operation, physical-layer implementation, package information, and recommended application circuitry.
Where can I find the DP83815DUJB/NOPB pinout?
The DP83815DUJB/NOPB pin assignments are presented in the manufacturer datasheet under the package and pin-configuration information for the 160-pin NFBGA (NZG). Use that ball-assignment table when creating the PCB footprint and assigning power, ground, PCI, Ethernet, and control signals.
What is the supply voltage of DP83815DUJB/NOPB?
The DP83815DUJB/NOPB operates from a 3 V to 3.6 V supply, with a listed supply current of 170 mA. According to the manufacturer datasheet, the supply requirements and associated decoupling recommendations must be followed to maintain reliable operation of the MAC, PCI interface, and integrated physical layer.
What is the operating temperature range of DP83815DUJB/NOPB?
The DP83815DUJB/NOPB is specified for a commercial operating-temperature range of 0 C to +70 C. The device is therefore intended for systems maintained within that ambient range. The manufacturer datasheet should also be consulted for any internal temperature limits or operating conditions not covered by the commercial classification.
What can replace DP83815DUJB/NOPB?
No pin-compatible drop-in replacement is established for the DP83815DUJB/NOPB from the available cross-reference information. DP83822IRHBR is identified as an Ethernet-controller alternative, but it does not share the DP83815's 160-pin NFBGA footprint or its legacy parallel PCI V2.2 interface. A replacement therefore requires electrical and PCB redesign rather than component substitution.
Is DP83822IRHBR a drop-in replacement for DP83815DUJB/NOPB?
The DP83822IRHBR is not a drop-in replacement for the DP83815DUJB/NOPB. Although both devices provide Ethernet-controller functions, the DP83815DUJB/NOPB uses a 160-pin NFBGA and a PCI V2.2 host interface, while the DP83822IRHBR uses a different package and interface arrangement. Existing PCB artwork and driver assumptions must be reassessed.
When should I choose DP83815DUJB/NOPB over DP83822IRHBR?
Choose the DP83815DUJB/NOPB only when an existing design requires a 33 MHz PCI V2.2 interface and the exact 160-pin NFBBA footprint. Choose a newer Ethernet controller when the host platform can be redesigned around a current interface and package. Because the alternative changes both mechanical and host-interface requirements, device age is generally more important than minor feature differences.
Where can I buy DP83815DUJB/NOPB online?
Use the Request a Quote form on this page to request current availability, order quantities, and lead time for the DP83815DUJB/NOPB. The part is identified as end-of-life in the available cross-reference information, so lifecycle confirmation and traceability should be obtained before committing it to a new production design.
What is the price of DP83815DUJB/NOPB?
The current unit price and quantity pricing for the DP83815DUJB/NOPB are obtained through the Request a Quote form on this page. Because this component is identified as end-of-life, request a quotation that states the exact MPN, packing format, available quantity, lifecycle status, and traceability requirements.
What is the lead time for DP83815DUJB/NOPB?
The current lead time for DP83815DUJB/NOPB is obtained through the Request a Quote form on this page. Request confirmation of stock, minimum order quantity, and any remaining-life restrictions. The end-of-life lifecycle status makes these commercial terms especially important for production-planning purposes.
Is DP83815DUJB/NOPB in stock?
Current stock for DP83815DUJB/NOPB should be confirmed through the Request a Quote form on this page. The manufacturer identifies the device as end-of-life, and the available cross-reference information describes it as an end-of-life component. A stock response should therefore be tied to a specific lot and its traceability condition.
What are the key specifications engineers should know about DP83815DUJB/NOPB?
The DP83815DUJB/NOPB combines 10 Mb/s and 100 Mb/s Ethernet, an IEEE 802.3 physical layer, and a 33 MHz PCI V2.2 host interface in a 160-pin NFBGA (NZG). It supports bus-master bursts up to 128 dwords or 512 bytes, VLANs, long frames, and IEEE 802.3x full-duplex flow control. Its listed supply range is 3 V to 3.6 V.
Does DP83815DUJB/NOPB comply with RoHS and automotive qualification?
The DP83815DUJB/NOPB is a commercial 0 C to +70 C Ethernet controller with a specified 3 V to 3.6 V operating range. Its RoHS and REACH classifications are not established by the available technical records, and AEC-Q100 automotive qualification does not apply to this commercial-temperature ordering code. Request current environmental and quality documentation before regulated use.

Справочные инженерные данные для DP83815DUJB/NOPB — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

The DP83815DUJB/NOPB is the appropriate choice only when the design already depends on a parallel PCI V2.2 host interface, a 33 MHz PCI clock, and its exact 160-pin NFBGA footprint. Its integrated MAC and PHY provide 10/100 Mb/s Ethernet, IEEE 802.3x flow control, VLAN support, and bus-master transfers up to 512 bytes. It is best suited to maintenance of legacy motherboards, PCI adapters, and embedded systems whose drivers and board layouts already exist. The DP83822IRHBR is not a drop-in choice because its package and host-interface requirements differ. For a new design, prefer a currently supported Ethernet controller unless preserving the old PCI platform is more important than obtaining a modern interface, lifecycle support, and current driver compatibility.

Заметки по проектированию

Use the manufacturer datasheet and recommended layout as the authority for the 160-ball NFBGA footprint, ball assignments, and component placement. Place all required decoupling capacitors at their associated supply pins with short, low-inductance connections. Preserve the specified Ethernet differential trace geometry and separation from noisy switching nodes; deviations can degrade signal integrity or electromagnetic performance.

Design the 3 V to 3.6 V rail to support the listed 170 mA supply current while accounting for local high-frequency transients. Provide the input and output capacitance specified by the manufacturer datasheet, and keep the supply return path continuous through the BGA ground balls. Do not substitute a lower-voltage rail because Ethernet magnetics and external circuitry may introduce additional constraints beyond the controller's own supply range.

Do not treat DP83822IRHBR or another Ethernet controller as a board-level substitution for the DP83815DUJB/NOPB. The target uses a 160-pin NFBGA and a parallel PCI V2.2 interface, so changing the device can require new PCB artwork, host drivers, and software support. Validate footprint, signal mapping, voltage, clocking, and driver compatibility independently before any redesign.

Route heat through the BGA thermal arrangement and copper planes described by the manufacturer layout guidance. Keep dense power circuitry away from areas that require thermal-sensitive routing where practical. Actual junction temperature depends on supply voltage, ambient temperature, load activity, PCB copper, airflow, and neighboring heat sources, so calculate the completed-board thermal margin rather than relying on the commercial 0 C to +70 C rating alone.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The device is a commercial 0 C to +70 C Ethernet controller. Current environmental, lead-free, halogen-free, and conflict-minerals declarations are not established by the available technical records.

Данные проверены: 2026-11-09 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

DP83815DUJB/NOPB datasheet DP83815DUJB/NOPB datasheet pdf DP83815DUJB/NOPB pinout DP83815DUJB/NOPB replacement DP83815DUJB/NOPB equivalent DP83815DUJB/NOPB cross reference DP83815DUJB/NOPB vs DP83822IRHBR DP83815DUJB/NOPB price DP83815DUJB/NOPB stock Texas Instruments DP83815DUJB/NOPB DP83815 160 pin NFBGA controller DP83815 PCI V2.2 Ethernet controller

Связанные компоненты & термины

Texas Instruments DP83815DUJB/NOPB DP83815 DP83822IRHBR Ethernet controller media access controller MAC physical layer PHY PCI V2.2 parallel PCI bus 10BASE-T 100BASE-T Fast Ethernet IEEE 802.3 IEEE 802.3x VLAN bus mastering NFBGA NZG package surface mount PC 97 PC 98 Ethernet magnetics power management IC
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ