Texas Instruments

DS90C185SQ/NOPB - 2.94Gbps LVDS Serializer | Texas Instruments

N.º da peça: DS90C185SQ/NOPB ✓ Ativo
1.71 V to 1.89 V Vdss 48-pin WQFN (NJV), 6 x 6 mm Package
MOQ: 1 |

DS90C185SQ/NOPB Visão geral

The Texas Instruments DS90C185SQ/NOPB is a low-power 1.8V FPD-Link LVDS serializer that supports a 2.94 Gbps data rate, accepts 28 LVCMOS inputs, and provides four LVDS outputs in a 48-pin WQFN package measuring 6 x 6 mm. It is designed to reduce the connection width between a host graphics processor and a display while transferring 24-bit RGB data and three video-control signals over a reduced-width 4-data-plus-clock LVDS interface.

An FPD-Link serializer is a display-interface device that converts parallel CMOS pixel and control data into a lower-pin-count, differential LVDS transmission format. In the broader electronics hierarchy, the DS90C185 belongs to the serializer and deserializer class of interface ICs, which supports display, GPU, embedded-visual, and portable-computing systems. Differential LVDS signaling reduces signal-integrity demands over long cable or board-trace distances compared with single-ended parallel RGB routing.

The principal DS90C185 features include a 2.94 Gbps maximum data rate, 28 LVCMOS inputs, four LVDS outputs, and a 1.71V to 1.89V operating supply range. The serializer accepts 24 bits of RGB information plus three video-control signals, then sends them through four data lanes and one clock lane. Its reduced-width interface decreases connector and routing complexity in portable battery-powered equipment while preserving high aggregate bandwidth.

This architecture is especially useful when the graphics source and display are separated by a flexible cable, rigid-flex PCB section, or internal display connection. The 2.94 Gbps rate provides sufficient link bandwidth for high-resolution display content, while differential LVDS outputs improve noise immunity compared with an unshielded parallel bus. The low 1.8V supply is consistent with space-constrained embedded systems where power, routing area, and connector count are important design constraints.

Typical uses include notebook and tablet displays, portable instrument displays, industrial human-machine interfaces, embedded control panels, automotive infotainment displays, and portable medical monitoring equipment. In these applications, the serializer reduces the number of conductors crossing the display hinge or internal cable while keeping the graphics-to-display connection organized. System designers should still verify display timing, panel-interface compatibility, lane mapping, and cable length against the manufacturer datasheet.

Layout is critical because the device combines high-speed LVDS outputs with low-voltage digital inputs. Place decoupling capacitors near the supply pins, route the differential clock and data pairs with matched geometry, and keep LVDS traces away from noisy switching nodes. Check the exposed thermal-pad connection and package land pattern carefully to preserve return-path continuity and signal performance.

This product page combines the manufacturer interface description, distributor ordering information, package details, pricing evidence, and engineering guidance to accelerate component evaluation. It also distinguishes true same-footprint replacements from carrier or packaging changes and highlights the parameters that must be checked before substituting a serializer in an existing display design.

Alternativas drop-in para DS90C185SQ/NOPB — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

DS90C185SQX/NOPB

✅ Drop-In
Texas Instruments
📦 48-WQFN (NJV), 6 x 6 mm
FPD-Link (LVDS) Serializer · 2.94 Gbps · 28 inputs · 4 outputs · LVCMOS RGB and video-control inputs · FPD-Link (LVDS) · 24-bit RGB plus three video-control signals · 4 data lanes plus clock

Consulte o preço

Ver ficha técnica →

DS90C185SQE/NOPB

✅ Drop-In
Texas Instruments
📦 48-WQFN (NJV), 6 x 6 mm
Low-power FPD-Link LVDS serializer · 2.94 Gbps · 1.8 V · 50 mW · 28 inputs · 4 outputs · 24-bit RGB plus 3 video control signals · 4 data lanes plus 1 clock lane

Consulte o preço

Ver ficha técnica →

DS90C185SQ/NOPB Especificações

Device Type FPD-Link (LVDS) Serializer
Maximum Data Rate 2.94 Gbps
Number of Inputs 28 inputs
Número de saídas 4 outputs
Input Signal Type LVCMOS
Output Signal Type FPD-Link and LVDS
Supply Voltage Range 1.71 V to 1.89 V
Supported Video Data 24-bit RGB plus 3 video-control signals
LVDS Lane Configuration 4 data lanes plus 1 clock lane
Encapsulamento 48-pin WQFN (NJV), 6 x 6 mm
Exposed Pad Present
Tipo de montagem Surface mount
Faixa de temperatura de operação -10 °C to +70 °C (TA)
Functional Application Host GPU to display RGB serialization
Power Class Low-power serializer
Interface Compatibility FPD-Link compatible
Carrier Option Custom reel
Standard Packaging Tape and reel

Guia de Configuração de Pinos do DS90C185SQ/NOPB 48-pin wqfn (njv), 6 x 6 mm

Configuração de pinos para DS90C185SQ/NOPB (pacote 48-pin wqfn (njv), 6 x 6 mm). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote 48-pin wqfn (njv), 6 x 6 mm para DS90C185SQ/NOPB

Nenhum dado detalhado de pinagem disponível para DS90C185SQ/NOPB.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

DS90C185SQ/NOPB é adequado para 6 aplicaçãos: Notebook and Tablet Display, Industrial Human-Machine Interface, Automotive Infotainment Display, Portable Medical Monitor, Embedded Control Panel, Portable Test and Measurement Instrument.

📱

Notebook and Tablet Display

The DS90C185SQ/NOPB fits between a host GPU and a compact LCD in notebooks, tablets, and portable computing devices because it serializes 24-bit RGB data and three video-control signals onto four LVDS data lanes plus a clock. Its 2.94 Gbps maximum data rate supports high-bandwidth display transfer, while the 1.71V to 1.89V supply range aligns with low-power portable systems. Reducing parallel conductors simplifies display connectors and protects routing space around hinges or foldable structures.

🏭

Industrial Human-Machine Interface

The DS90C185SQ/NOPB is suitable for industrial HMIs that transfer rendered graphics from an embedded processor to a remote display across a panel connection. The 28-input LVCMOS side accepts RGB and control information, while four differential outputs reduce the cable width compared with a parallel interface. The 2.94 Gbps capability accommodates demanding display timing, and the 1.8V-class supply supports compact embedded control systems.

🚗

Automotive Infotainment Display

The DS90C185SQ/NOPB can support the GPU-to-display link in automotive infotainment systems where reduced connector width and robust differential signaling are valuable. It translates 24-bit RGB data plus three control signals into four FPD-Link LVDS data lanes and a clock, enabling a more compact internal display harness. Designers should verify the exact ordering variant's automotive qualification, temperature requirements, display timing, and automotive interface validation before production release.

💊

Portable Medical Monitor

The DS90C185SQ/NOPB can reduce the interconnect burden between a portable medical system controller and its local display. Its four-data-plus-clock LVDS output carries 24-bit RGB and three video-control signals at rates up to 2.94 Gbps, while the low 1.8V-class operating range aligns with compact battery-powered equipment. Differential signaling improves resistance to common-mode noise in multi-cable medical-device assemblies, although final signal-integrity and safety validation remains application-specific.

🧩

Embedded Control Panel

The DS90C185SQ/NOPB is appropriate for embedded control panels where a processor drives a display over an internal cable or rigid-flex board. The serializer reduces the number of conductors required for 24-bit RGB and three control signals, easing routing through a sealed enclosure. Its 48-pin WQFN package and 2.94 Gbps rate support compact, high-bandwidth designs, provided that differential-pair geometry, connector assignments, and panel timing are implemented according to the manufacturer documentation.

🔧

Portable Test and Measurement Instrument

The DS90C185SQ/NOPB can support a high-resolution display in portable oscilloscopes, analyzers, and field-service instruments. The parallel LVCMOS inputs accept display pixel and control data, and the reduced-width LVDS interface limits the number of conductors crossing an instrument enclosure or hinge. A 2.94 Gbps maximum rate provides useful link headroom, while differential output helps maintain data integrity when the display is connected through an internal cable.

What is the DS90C185SQ/NOPB?
The DS90C185SQ/NOPB is a low-power 1.8V FPD-Link LVDS serializer from Texas Instruments. It converts 24-bit RGB data and three video-control signals from parallel LVCMOS inputs into a reduced-width interface comprising four LVDS data lanes and one clock lane, with a maximum data rate of 2.94 Gbps. The device is intended to reduce connection width between a host GPU and a display in portable or embedded systems.
What is the operating voltage of DS90C185SQ/NOPB?
The DS90C185SQ/NOPB operates from 1.71V to 1.89V. According to the Texas Instruments DS90C185 product documentation, this 1.8V-class supply range supports low-power portable and embedded display designs. The interface accepts LVCMOS inputs and produces FPD-Link-compatible LVDS outputs, so system rail planning should include the specified supply range rather than relying on a generic 1.8V nominal assumption.
How many inputs and outputs does the DS90C185 have?
The DS90C185 has 28 inputs and four outputs. Distributor specifications identify the input format as LVCMOS and the output format as FPD-Link or LVDS. Functionally, the parallel side carries 24-bit RGB data and three video-control signals, while the reduced-width serial side uses four data lanes plus a clock lane. This lane count helps determine connector and cable requirements in a display subsystem.
What is the maximum data rate of DS90C185SQ/NOPB?
The DS90C185SQ/NOPB supports a maximum data rate of 2.94 Gbps. Texas Instruments describes the device as a low-power serializer for portable battery-powered applications that reduces the size of the RGB interface between a host GPU and a display. The 2.94 Gbps figure represents aggregate serial link capability and should be checked against panel timing and system-level video requirements.
Where can I download the DS90C185SQ/NOPB datasheet PDF?
The official DS90C185 datasheet is available from Texas Instruments at https://www.ti.com/lit/gpn/DS90C185, and the manufacturer product page is located at https://www.ti.com/product/DS90C185. Use the manufacturer datasheet for the complete electrical characteristics, pin descriptions, timing diagrams, application circuit, and package drawings. The part-specific ordering entry is also available through the TI DS90C185SQ/NOPB product-details page.
Where can I find the DS90C185SQ/NOPB pinout?
The DS90C185SQ/NOPB pinout is published in the Texas Instruments DS90C185 manufacturer datasheet at https://www.ti.com/lit/gpn/DS90C185. The device uses a 48-pin WQFN package with an exposed pad, designated NJV by the manufacturer. Use the package drawing and pin-description tables in that document when assigning connector signals, configuring control pins, and creating the PCB footprint.
Can DS90C185SQ/NOPB be used for a portable GPU-to-display interface?
Yes, the DS90C185SQ/NOPB is specifically designed for portable battery-powered applications that reduce the RGB connection between a host GPU and a display. Its 1.71V to 1.89V supply range, low-power serializer architecture, and 2.94 Gbps capability fit low-power embedded display systems. The implementation must still satisfy the panel's timing, lane-mapping, voltage, and cable requirements.
DS90C185SQ/NOPB vs DS90C185SQX/NOPB - which should I choose?
DS90C185SQ/NOPB and DS90C185SQX/NOPB refer to the same Texas Instruments serializer family and both are listed in the 48-pin WQFN format. Cross-reference information identifies DS90C185SQ/NOPB as a parametric equivalent for DS90C185SQX/NOPB, while manufacturer material describes carrier options as products that are exactly the same in a different carrier form. Confirm the ordering code, reel configuration, and customer-specific packaging before final procurement.
When should I choose DS90C185SQ/NOPB over a carrier-option variant?
Choose DS90C185SQ/NOPB when its ordering, reel, and qualification configuration matches the intended production build. The manufacturer identifies related carrier options as exactly the same product in a different carrier type, so the electrical choice is generally driven by the exact MPN rather than a functional change. Review the ordering information and approved-parts list, then confirm how the selected carrier integrates with the assembly process.
What is the best drop-in replacement for DS90C185SQ/NOPB?
DS90C185SQ/NOPB is the primary Texas Instruments ordering option, and related DS90C185 carrier-option listings are the closest documented replacements because they use the same device and package. A cross-reference listing identifies DS90C185SQ/NOPB as a parametric equivalent for DS90C185SQX/NOPB. Only five alternatives could be documented from the manufacturer and cross-reference information, and no independent cross-brand serializer was confirmed as pin-to-pin compatible.
Can DS90C185SQE/NOPB replace DS90C185SQ/NOPB?
DS90C185SQE/NOPB is listed as an alternative packaging option for DS90C185SQ/NOPB rather than a different serializer. The manufacturer describes related products as exactly the same but supplied in a different carrier type. Consequently, it can serve as a same-device replacement for a matching assembly process, but procurement should verify the exact packing code, reel quantity, qualification status, and customer-specific manufacturing requirements.
Is DS90C185SQ/NOPB a serializer or a deserializer?
DS90C185SQ/NOPB is a serializer. It accepts 28 parallel LVCMOS inputs associated with 24-bit RGB video and three control signals, then transmits them as four FPD-Link LVDS data outputs with a clock. The compact output interface reduces conductor count between a host GPU and a display while supporting data rates up to 2.94 Gbps.
What are the key specifications of DS90C185SQ/NOPB that engineers should know?
The key specifications are a 2.94 Gbps maximum rate, 1.71V to 1.89V supply, 28 LVCMOS inputs, four LVDS outputs, and a 48-pin 6 x 6 mm WQFN package. Texas Instruments also identifies 24-bit RGB plus three control signals, a four-data-plus-clock reduced-width interface, and a -10 °C to +70 °C ambient operating range. These figures define its display-interface bandwidth, rail requirements, and PCB footprint.
Where can I buy DS90C185SQ/NOPB and check its lead time?
Use the Request a Quote form on this page to obtain current DS90C185SQ/NOPB commercial availability, lead time, and order confirmation. The manufacturer lists the standard part as active and describes custom reel availability as product-dependent. Current delivery schedules and minimum order quantities should be confirmed through the quote workflow because production and packaging requirements can affect the order.
Is DS90C185SQ/NOPB in stock?
Current stock status should be confirmed through the Request a Quote form on this page. The manufacturer lists DS90C185SQ/NOPB as active, but orderable configuration, custom-reel availability, and assembly requirements can affect supply. Use the quote form for an allocation response tied to the requested quantity, packing format, and delivery location rather than relying on a generic stock indicator.
What is the price of DS90C185SQ/NOPB?
Use the Request a Quote form on this page for the current price of DS90C185SQ/NOPB, including the requested quantity and reel configuration. Commercial terms can change with order volume, packaging, component availability, and delivery requirements. The structured offer on this page is used for product presentation, while the quote form provides the current purchasing response for the exact MPN.
Does DS90C185SQ/NOPB meet RoHS, REACH, or AEC-Q100 requirements?
The DS90C185SQ/NOPB ordering entry is associated with Texas Instruments, and its documentation identifies the product as an automotive-grade interface part, but the exact RoHS, REACH, and AEC-Q100 declarations should be taken from the current manufacturer product and material-compliance records. Use the manufacturer compliance documents for qualification status because ordering suffixes alone do not establish every regional material requirement.

Dados de referência de engenharia para DS90C185SQ/NOPB — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose DS90C185SQ/NOPB when your design requires the Texas Instruments 48-WQFN low-power FPD-Link serializer, a 2.94 Gbps maximum link rate, and a four-data-plus-clock LVDS connection from a host GPU to a display. It is appropriate for portable, industrial, embedded, medical, and automotive display systems when the operating range, panel timing, and connector assignment meet the device requirements. DS90C185SQX/NOPB is the closest documented option when a customer-specific carrier ordering code is required; its listed electrical capabilities and package match the primary part. DS90C185SQE/NOPB is appropriate for production flows using its alternative carrier configuration. No independent cross-brand drop-in serializer was confirmed, so avoid assuming that another manufacturer's FPD-Link serializer is pin-compatible. Verify the exact MPN, reel configuration, qualification documentation, exposed-pad layout, and current production availability before releasing a BOM.

Comparação com alternativas

Parâmetro Este produto DS90C185SQX/NOPB DS90C185SQE/NOPB
Brand Texas Instruments Texas Instruments Texas Instruments
Package 48-WQFN (NJV), 6 x 6 mm 48-WQFN (NJV), 6 x 6 mm 48-WQFN (NJV), 6 x 6 mm
Device Function Low-power FPD-Link LVDS serializer Low-power FPD-Link LVDS serializer Low-power FPD-Link LVDS serializer
Maximum Data Rate 2.94 Gbps 2.94 Gbps 2.94 Gbps
Number of Inputs 28 LVCMOS inputs 28 inputs 28 inputs
Number of Outputs 4 LVDS outputs 4 outputs 4 outputs
Supply Voltage Range 1.71 V to 1.89 V 1.71 V to 1.89 V 1.71 V to 1.89 V
Supported Video Data 24-bit RGB plus 3 video-control signals 24-bit RGB plus 3 video-control signals 24-bit RGB plus 3 video-control signals
Output Interface 4-data-plus-clock FPD-Link LVDS 4-data-plus-clock FPD-Link LVDS 4-data-plus-clock FPD-Link LVDS
Operating Temperature Range -10 °C to +70 °C (TA) -10 °C to +70 °C (TA) -10 °C to +70 °C (TA)

Principais diferenciais

  • Documented exact-device alternatives (vs DS90C185SQE/NOPB)
  • Cross-reference support for the primary ordering option (vs DS90C185SQX/NOPB)
  • Reduced-width display connectivity (vs DS90C185SQX/NOPB)

Notas de projeto

Create the footprint from the NJV 48-pin WQFN drawing in the Texas Instruments datasheet, including the exposed-pad geometry and its thermal and electrical connection. A nominal QFN-48 footprint can differ in pad dimensions, solder-mask opening, or exposed-pad clearance, so verify every land against the manufacturer package drawing before releasing artwork.

Route each FPD-Link differential pair as a coupled pair with matched impedance, continuous reference-plane return, and minimized stubs. Keep the LVDS clock and data lanes away from switching power nodes and noisy digital return currents. Confirm lane order and connector polarity against the serializer and display-device pin descriptions to avoid an apparently functional link with reversed data pairs.

Place the required bypass capacitors at the DS90C185 supply and ground pins according to the manufacturer application circuit, keeping the connection paths short. Because the device operates from 1.71V to 1.89V, the upstream regulator must remain within that range across tolerance, temperature, and load. Avoid sharing long return paths between the serializer and switching converter outputs.

Validate the complete host-GPU-to-panel link rather than testing only the serializer output. Check input timing, LVDS output amplitude, lane mapping, panel compatibility, and the effects of cable or connector impedance. The 2.94 Gbps specification is a maximum device capability, not proof that every display timing or interconnect will operate without margin.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

A distributor product listing identifies the device as automotive grade, but the exact AEC-Q100 qualification and material-compliance declarations were not available. Confirm current RoHS, REACH, lead-free, halogen-free, conflict-minerals, and qualification status from the manufacturer's compliance documents for the selected ordering code.

Buscas relacionadas

DS90C185SQ/NOPB datasheet DS90C185SQ/NOPB pinout DS90C185SQ/NOPB datasheet pdf DS90C185SQ/NOPB equivalent DS90C185SQ/NOPB replacement DS90C185SQ/NOPB cross reference DS90C185SQ/NOPB price DS90C185SQ/NOPB stock Texas Instruments DS90C185SQ/NOPB DS90C185 2.94Gbps serializer DS90C185 48-WQFN NJV DS90C185 GPU display interface DS90C185SQ/NOPB vs DS90C185SQX/NOPB DS90C185 FPD-Link application circuit

Componentes & termos relacionados

Texas Instruments DS90C185SQ/NOPB DS90C185SQX/NOPB DS90C185SQE/NOPB FPD-Link LVDS serializer deserializer interface IC display interface host GPU 24-bit RGB LVCMOS 2.94 Gbps 1.8 V supply four data lanes clock lane 48-WQFN NJV package QFN family surface mount embedded systems portable electronics industrial human-machine interface automotive infotainment
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ