Texas Instruments

DS90LV017M/NOPB - Single LVDS Driver | Texas Instruments

N.º da peça: DS90LV017M/NOPB ✓ Ativo
3 V to 3.6 V Vdss 8-pin SOIC, 0.154 inch body width and 3.90 mm width Package 300 MHz Speed
MOQ: 1 |

DS90LV017M/NOPB Visão geral

The Texas Instruments DS90LV017M/NOPB is a single-channel LVDS differential line driver supporting data rates in excess of 600 Mbps, or 300 MHz, from a 3.3 V supply in an 8-pin SOIC package. It converts one logic input into a balanced low-voltage differential output for reliable point-to-point communication.

An LVDS driver is a line-driver IC within the interface IC and high-speed differential signaling hierarchy. Differential signaling sends complementary currents through two conductors, allowing common-mode noise to be rejected by the receiving device. This makes the DS90LV017M/NOPB suitable for transferring high-speed clock, control, and data signals across cables or PCB traces where signal integrity is important.

The device uses a current-mode architecture to limit power dissipation at high operating frequencies and reduce short-circuit fault current. Its operating supply range is 3 V to 3.6 V. The verified manufacturer information identifies the device as a 1/0 line driver, meaning it provides one differential driver and no integrated receiver. Its differential output is intended for systems operating at data rates above 600 Mbps.

The SOIC-8 package provides a conventional surface-mount implementation and supports tube packaging according to the component listing. The device is identified as a lead-free SOIC-8 part and is associated with EIA-644-A and TIA-644-A low-voltage differential signaling specifications. Its commercial operating-temperature information must be confirmed against the exact ordering code before deployment in temperature-sensitive equipment.

Typical uses include high-speed point-to-point links, clock distribution, industrial control interfaces, test equipment, and embedded systems that convert a low-voltage CMOS input into an LVDS differential output. In each case, the receiver must support compatible LVDS levels, and the interconnect must be routed as a controlled-impedance differential pair.

PCB implementation should minimize the distance between the driver and the connector, maintain closely matched differential trace lengths, and provide a continuous reference plane beneath the pair. Keep the differential traces away from switching nodes and noisy return-current paths because trace geometry and return-path discontinuity can degrade signal-integrity performance even when the driver itself operates within its stated limits.

This product record combines the device function, verified electrical and packaging characteristics, available same-family alternatives, and practical PCB guidance. It also highlights where exact pin assignments, temperature limits, lifecycle details, and qualified drop-in replacements should be confirmed in the manufacturer datasheet before a production release.

Alternativas drop-in para DS90LV017M/NOPB — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com DS90LV017M/NOPB (mesmo formato e footprint) — diferindo em Device Type, Technology.

Texas Instruments
Device Type: Single high-speed differential line and bus driver
Technology: EIA-644-A and TIA-644-A LVDS

DS90LV017ATMX/NOPB

✅ Drop-In
📦 8-pin SOIC (D)
Same single-driver LVDS function, 3.3 V class supply, greater-than-600-Mbps capability, and 8-pin SOIC package; exact ordering-code temperature and qualification details require confirmation.

📋 Alternativa de referência (fora do catálogo)

DS90LV017M/NOPB Especificações

Device Type Single LVDS differential line driver
Number of Drivers 1 driver
Number of Receivers 0 receivers
Logic Type Line and Bus Driver
Supply Voltage Range 3 V to 3.6 V
Nominal Supply Voltage 3.3 V
Maximum Data Rate Greater than 600 Mbps
Frequência máxima de clock 300 MHz
Output Architecture Current-mode differential driver
Signaling Standard LVDS
Technology EIA-644-A and TIA-644-A
Encapsulamento 8-pin SOIC, 0.154 inch body width and 3.90 mm width
Tipo de montagem Surface mount
Temperatura de operação -40°C to +85°C
Packaging Tube
Lead-Free Status Lead free

Guia de Configuração de Pinos do DS90LV017M/NOPB 8-pin soic, 0.154 inch body width and 3.90 mm width

Configuração de pinos para DS90LV017M/NOPB (pacote 8-pin soic, 0.154 inch body width and 3.90 mm width). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote 8-pin soic, 0.154 inch body width and 3.90 mm width para DS90LV017M/NOPB

Nenhum dado detalhado de pinagem disponível para DS90LV017M/NOPB.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

DS90LV017M/NOPB é adequado para 6 aplicaçãos: High-Speed Clock Distribution, Industrial Point-to-Point Data Link, Embedded Communication Backplane, Test and Measurement Instrumentation, High-Speed Digital Backplane, Camera and Sensor Data Interface.

⚡

High-Speed Clock Distribution

The DS90LV017M/NOPB fits point-to-point clock distribution when the destination device accepts a 3.3 V LVDS clock. Its current-mode differential output supports data rates in excess of 600 Mbps, or 300 MHz, while the balanced signal helps reject common-mode noise coupled into the interconnect. Place the driver close to the clock source and route the output as a controlled-impedance differential pair. Account for connector and receiver loading, maintain matched trace lengths, and confirm that the receiving clock device recognizes the LVDS amplitude and threshold before treating the link as operational.

🏭

Industrial Point-to-Point Data Link

The DS90LV017M/NOPB is appropriate for a short industrial control or instrumentation link when both endpoints use compatible 3.3 V LVDS signaling. Its single-driver configuration converts one logic signal into a differential pair capable of operation above 600 Mbps, supporting reliable transfer of commands, status data, or synchronized timing signals. Keep the trace pair short where possible, provide a continuous reference plane, and separate it from motor, relay, and switching-power-node routing. Verify industrial EMC, surge, isolation, and environmental requirements at the system level rather than treating the line-driver specification alone as complete qualification.

🌐

Embedded Communication Backplane

A DS90LV017M/NOPB can drive a point-to-point channel in an embedded communication system that requires a single differential output rather than a full transceiver. Its greater-than-600-Mbps capability and current-mode output architecture are useful for transferring high-rate commands or data between circuit cards. The transmitter and receiver should use compatible LVDS thresholds, and the PCB or cable interconnect should have defined differential impedance. Avoid sharing the differential pair with unrelated high-current signals, and verify connector geometry, loss, skew, and receiver tolerance across the complete channel.

🔧

Test and Measurement Instrumentation

The DS90LV017M/NOPB is useful in test and measurement equipment when a low-voltage logic signal must be transmitted to a remote instrument or daughterboard over a high-speed differential link. Supporting operation above 600 Mbps allows it to carry clock, trigger, or sampled-data signals when the receiving instrument provides compatible LVDS inputs. Preserve signal quality with short traces, symmetric routing, and a solid reference plane. Account for cable loss and test-fixture loading at the intended operating frequency, and confirm that the instrument input can tolerate the differential voltage and common-mode range generated by the driver.

🖥️

High-Speed Digital Backplane

The DS90LV017M/NOPB can serve as a point-to-point edge on a digital backplane when 3.3 V LVDS is the selected interface standard. The device supports rates above 600 Mbps and limits power dissipation through its current-mode architecture, making it appropriate for transferring clock or data between closely coupled boards. Each signal still requires a compatible receiver, correct differential impedance, and adequate return-path continuity. Evaluate connector and PCB loss, lane-to-lane skew, and power-supply noise during system bring-up; individual driver operation above 600 Mbps does not guarantee compliance with an external interface specification.

🎥

Camera and Sensor Data Interface

The DS90LV017M/NOPB can provide a high-speed differential link from a camera, sensor, or image-processing board to a receiver located on another circuit board. Its single-channel LVDS output supports clock or data transfer above 600 Mbps while providing noise immunity benefits associated with balanced signaling. The transmitting logic must meet the driver's input threshold, and the receiving device must provide an LVDS-compatible input with suitable common-mode tolerance. Route the pair over a continuous reference plane, match its geometry and length to the receiver requirement, and test the complete cable-and-connector path because sensor output amplitude and edge-rate limitations may determine the practical link rate.

Resumo dos produtos recomendados

DS90LV017ATMX/NOPB Same-family single LVDS driver alternative Usado em: High-Speed Clock Distribution, Industrial Point-to-Point Data Link, Embedded Communication Backplane, Test and Measurement Instrumentation, High-Speed Digital Backplane, Camera and Sensor Data Interface SN65LVDS1DR Single differential-driver interface comparison Usado em: High-Speed Clock Distribution, Test and Measurement Instrumentation, Camera and Sensor Data Interface DS90LV017A Manufacturer-documented family member Usado em: Industrial Point-to-Point Data Link, Embedded Communication Backplane, High-Speed Digital Backplane
What is the operating voltage of DS90LV017M/NOPB?
The DS90LV017M/NOPB operates from 3 V to 3.6 V, with 3.3 V as the nominal supply. According to the Texas Instruments DS90LV017A product information, the device is a current-mode LVDS driver optimized for high-data-rate and low-power operation. A 3.3 V supply rail also matches the input-referenced LVDS signaling environment commonly used with this class of line-driver IC.
What is the maximum data rate of DS90LV017M/NOPB?
The DS90LV017M/NOPB supports data rates in excess of 600 Mbps, corresponding to a signaling frequency above 300 MHz. Texas Instruments describes this performance for the DS90LV017A family, which shares the target device's LVDS driver architecture. The current-mode implementation helps keep power dissipation low and short-circuit fault current minimized at high frequency.
Where can I download the DS90LV017M/NOPB datasheet PDF?
The DS90LV017M/NOPB datasheet PDF is available from the manufacturer-linked PDF hosted at the URL listed on this product page. The manufacturer product page for DS90LV017A also provides the primary technical documentation and supported-ordering information for the closely related family. Use the pin-description table and electrical-characteristics tables in that documentation before assigning PCB signals or selecting termination values.
Where can I find the DS90LV017M/NOPB pinout?
The DS90LV017M/NOPB uses an 8-pin SOIC package, but the exact numbered pin assignments should be taken from the manufacturer datasheet rather than inferred from the package outline. The verified technical description confirms the 1/0 driver configuration and 8-SOIC case. The package diagram shown with this record identifies the physical SOIC-8 footprint, while the manufacturer pin table remains the authoritative source for input, output, ground, and supply connections.
What are the key specifications of DS90LV017M/NOPB that engineers should know?
The DS90LV017M/NOPB is a single-channel, current-mode LVDS driver operating from 3 V to 3.6 V at data rates above 600 Mbps. It provides one driver and no integrated receiver, uses EIA-644-A and TIA-644-A signaling, and is housed in an 8-pin SOIC package. The current-mode output architecture is specifically intended to maintain low power dissipation and minimize fault current at high frequency.
Is DS90LV017M/NOPB suitable for high-speed clock distribution?
Yes, the DS90LV017M/NOPB is suitable for high-speed clock distribution because its current-mode LVDS output supports signaling above 600 Mbps, or 300 MHz. The differential output improves common-mode noise rejection on suitable balanced interconnects. The receiving clock device must accept LVDS levels, and the PCB must maintain controlled differential impedance and closely matched trace geometry.
DS90LV017M/NOPB vs DS90LV017ATMX/NOPB — which is better?
DS90LV017ATMX/NOPB is the directly documented 8-pin SOIC member of the DS90LV017A family, while DS90LV017M/NOPB is the exact ordering code represented by this product record. Both describe a single high-speed differential driver using LVDS and a current-mode output. Choose DS90LV017ATMX/NOPB when its exact ordering information and manufacturer qualification data are required for a new design.
What is the difference between DS90LV017M/NOPB and SN65LVDS1DR?
Both devices are associated with single differential-driver interface functions, but similar function alone does not establish drop-in compatibility. The available comparison information warns that functional characteristics may be consistent while parameters and circuit implementation can differ. Review the complete pin, supply, input-threshold, output-current, timing, and package details in each manufacturer datasheet before considering SN65LVDS1DR as a replacement.
When should I choose DS90LV017M/NOPB over another LVDS driver?
Choose DS90LV017M/NOPB when the design requires a 3.3 V, single-channel LVDS driver in an 8-pin SOIC package and operation above 600 Mbps. Its current-mode output architecture provides a defined low-power and fault-current strategy at high frequency. If a project requires a different package, supply range, integrated receiver, temperature grade, or automotive qualification, select a device explicitly documented for those requirements.
Is DS90LV017M/NOPB suitable for industrial control systems?
The DS90LV017M/NOPB can suit industrial point-to-point interfaces when the system uses 3.3 V LVDS and the listed operating-temperature range covers the installation environment. Its differential output supports high-speed data and clock transmission over suitable interconnects. Industrial suitability also depends on the surrounding equipment's isolation, surge, EMC, environmental, and functional-safety requirements.
What can replace DS90LV017M/NOPB?
The closest documented drop-in candidate is DS90LV017ATMX/NOPB, an 8-pin SOIC single LVDS differential driver from the same manufacturer family. Confirm its complete ordering details, temperature grade, and electrical limits against the target design. A true replacement must also match every package pin, supply requirement, input threshold, differential output characteristic, and timing specification.
Where to buy DS90LV017M/NOPB online?
Use the Request a Quote form on this page to request DS90LV017M/NOPB availability, current lead time, and minimum order quantity. The form allows purchasing teams to obtain a current quotation for the exact 8-pin SOIC ordering code without relying on a static listing that may no longer reflect stock or lifecycle conditions. Specify the required quantity and tube packaging when submitting the request.
What is the price of DS90LV017M/NOPB?
Use the Request a Quote form on this page for the current price of DS90LV017M/NOPB. Quotations depend on quantity, packaging, component condition, and current market availability, so a static unit figure can become inaccurate. Include the required quantity and whether tube packaging is acceptable so the supplier can return an actionable commercial response.
What is the lead time and stock status for DS90LV017M/NOPB?
Current stock and lead time for DS90LV017M/NOPB should be requested through the Request a Quote form on this page. The exact ordering code is listed as an 8-SOIC line driver in tube packaging, but neither a fixed stock quantity nor a manufacturer commitment should be assumed from a product-page presence. State the required date and quantity when requesting the quotation.
Is DS90LV017M/NOPB RoHS compliant?
The exact RoHS status of DS90LV017M/NOPB is not established by the verified component information and should be confirmed with Texas Instruments before a regulated production release. The ordering code is identified as lead free, but lead-free construction does not by itself establish every regional substance restriction. Request the current material-compliance declaration or product-page compliance statement for the exact ordering code.
What is the best Texas Instruments equivalent for DS90LV017M/NOPB?
DS90LV017ATMX/NOPB is the best documented same-manufacturer candidate because it is an 8-pin SOIC single high-speed differential LVDS driver from the DS90LV017A family. It provides the same core 1/0 driver configuration and the stated capability above 600 Mbps. Final substitution still requires pin-by-pin and electrical comparison, especially for temperature grade, supply limits, and timing.

Dados de referência de engenharia para DS90LV017M/NOPB — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose DS90LV017M/NOPB when the board needs a single-channel, 3.3 V LVDS driver in an 8-pin SOIC package and the link is intended to operate above 600 Mbps. Its current-mode output architecture is particularly relevant in space-constrained or high-frequency designs where low dissipation and controlled short-circuit current are important. DS90LV017ATMX/NOPB is the closest documented same-manufacturer candidate because it preserves the core driver function, package, supply class, and high-speed capability; verify exact temperature and qualification requirements before substitution. SN65LVDS1DR may serve a similar single-driver function, but it should not be treated as a drop-in replacement without a complete pin and electrical comparison. Neither alternative should be selected solely because it is an 8-pin SOIC line driver; package equivalence is necessary but not sufficient for drop-in approval.

Comparação com alternativas

Parâmetro Este produto DS90LV017ATMX/NOPB
Package 8-pin SOIC 8-pin SOIC (D)
Brand Texas Instruments Texas Instruments
Device Function Single LVDS differential line driver Single high-speed differential driver
Number of Drivers 1 driver 1 driver
Number of Receivers 0 receivers 0 receivers
Supply Voltage 3 V to 3.6 V 3 V to 3.6 V
Maximum Data Rate Greater than 600 Mbps Greater than 600 Mbps
Maximum Signaling Frequency 300 MHz 300 MHz
Output Architecture Current-mode differential output Current-mode differential output
Protocol LVDS LVDS
Operating Temperature -40°C to +85°C -40°C to +85°C
Mounting Type Surface mount Surface mount

Principais diferenciais

  • Documented same-family drop-in candidate (vs DS90LV017ATMX/NOPB)
  • High-speed current-mode operation (vs SN65LVDS1DR)
  • Single-driver LVDS interface (vs DS90LV001TMX)

Notas de projeto

Route the LVDS output as a controlled-impedance differential pair with matched spacing and minimal length. Maintain a continuous reference plane beneath the traces, avoid vias where practical, and keep the pair away from switching nodes and high-current return paths. Differential performance depends on return-path continuity; a split plane beneath the pair can substantially degrade the signal even when the driver operates within its specified data rate.

Confirm the receiver's LVDS input threshold, differential impedance, common-mode range, and termination requirements before fixing the interconnect. Use the manufacturer's receiver and driver documentation to determine whether a termination network is required at the far end. Validate the complete path with an appropriate high-speed measurement setup, since connector and PCB loss can reduce the practical operating rate below the driver's stated greater-than-600-Mbps capability.

Place the DS90LV017M/NOPB close to the source of the signal so that the unterminated single-ended input trace remains short. Keep the logic input away from differential outputs and noisy switching nodes. If the source device has slow or floating output timing, verify that it meets the driver's input thresholds and edge requirements; otherwise, output-state timing may become the limiting factor even when the LVDS link itself is correctly designed.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Yes
Sem halogênios
Unknown
Minerais de conflito
Unknown

The component listing identifies the exact ordering code as lead free. Exact RoHS, REACH, halogen-free, and conflict-minerals declarations were not established by the verified information and must be confirmed with Texas Instruments for the exact ordering code.

Dados verificados em: 2026-11-16 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

DS90LV017M/NOPB datasheet DS90LV017M/NOPB pinout DS90LV017M/NOPB datasheet pdf DS90LV017M/NOPB equivalent DS90LV017M/NOPB replacement DS90LV017M/NOPB cross reference DS90LV017M/NOPB footprint DS90LV017M/NOPB price DS90LV017M/NOPB stock Texas Instruments DS90LV017M/NOPB DS90LV017M/NOPB 600Mbps LVDS DS90LV017M/NOPB SOIC-8 pinout DS90LV017M/NOPB clock distribution DS90LV017M/NOPB vs DS90LV017ATMX/NOPB

Componentes & termos relacionados

Texas Instruments DS90LV017M/NOPB DS90LV017A DS90LV017ATMX/NOPB SN65LVDS1DR DS90LV001TMX LVDS Low Voltage Differential Signaling LVDS driver line driver interface IC semiconductor current-mode differential output EIA-644-A TIA-644-A 3.3 V logic 600 Mbps 300 MHz SOIC-8 surface mount differential pair controlled impedance common-mode noise rejection clock distribution point-to-point interface
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ