DS90LV017M/NOPB - Single LVDS Driver | Texas Instruments
부품 번호: DS90LV017M/NOPB ✓ 활성DS90LV017M/NOPB 개요
An LVDS driver is a line-driver IC within the interface IC and high-speed differential signaling hierarchy. Differential signaling sends complementary currents through two conductors, allowing common-mode noise to be rejected by the receiving device. This makes the DS90LV017M/NOPB suitable for transferring high-speed clock, control, and data signals across cables or PCB traces where signal integrity is important.
The device uses a current-mode architecture to limit power dissipation at high operating frequencies and reduce short-circuit fault current. Its operating supply range is 3 V to 3.6 V. The verified manufacturer information identifies the device as a 1/0 line driver, meaning it provides one differential driver and no integrated receiver. Its differential output is intended for systems operating at data rates above 600 Mbps.
The SOIC-8 package provides a conventional surface-mount implementation and supports tube packaging according to the component listing. The device is identified as a lead-free SOIC-8 part and is associated with EIA-644-A and TIA-644-A low-voltage differential signaling specifications. Its commercial operating-temperature information must be confirmed against the exact ordering code before deployment in temperature-sensitive equipment.
Typical uses include high-speed point-to-point links, clock distribution, industrial control interfaces, test equipment, and embedded systems that convert a low-voltage CMOS input into an LVDS differential output. In each case, the receiver must support compatible LVDS levels, and the interconnect must be routed as a controlled-impedance differential pair.
PCB implementation should minimize the distance between the driver and the connector, maintain closely matched differential trace lengths, and provide a continuous reference plane beneath the pair. Keep the differential traces away from switching nodes and noisy return-current paths because trace geometry and return-path discontinuity can degrade signal-integrity performance even when the driver itself operates within its stated limits.
This product record combines the device function, verified electrical and packaging characteristics, available same-family alternatives, and practical PCB guidance. It also highlights where exact pin assignments, temperature limits, lifecycle details, and qualified drop-in replacements should be confirmed in the manufacturer datasheet before a production release.
드롭인 대체품: DS90LV017M/NOPB — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: DS90LV017M/NOPB (동일 폼 팩터 및 풋프린트) — 차이점: Device Type, Technology.
DS90LV017ATMX/NOPB
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
DS90LV017M/NOPB 사양
| Device Type | Single LVDS differential line driver |
| Number of Drivers | 1 driver |
| Number of Receivers | 0 receivers |
| Logic Type | Line and Bus Driver |
| Supply Voltage Range | 3 V to 3.6 V |
| Nominal Supply Voltage | 3.3 V |
| Maximum Data Rate | Greater than 600 Mbps |
| 최대 클록 주파수 | 300 MHz |
| Output Architecture | Current-mode differential driver |
| Signaling Standard | LVDS |
| Technology | EIA-644-A and TIA-644-A |
| 패키지 | 8-pin SOIC, 0.154 inch body width and 3.90 mm width |
| 실장 유형 | Surface mount |
| 동작 온도 | -40°C to +85°C |
| Packaging | Tube |
| Lead-Free Status | Lead free |
DS90LV017M/NOPB 8-pin soic, 0.154 inch body width and 3.90 mm width 핀 구성 가이드
DS90LV017M/NOPB(8-pin soic, 0.154 inch body width and 3.90 mm width 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: DS90LV017M/NOPB.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
DS90LV017M/NOPB 적합 용도: 6 애플리케이션s: High-Speed Clock Distribution, Industrial Point-to-Point Data Link, Embedded Communication Backplane, Test and Measurement Instrumentation, High-Speed Digital Backplane, Camera and Sensor Data Interface.
High-Speed Clock Distribution
The DS90LV017M/NOPB fits point-to-point clock distribution when the destination device accepts a 3.3 V LVDS clock. Its current-mode differential output supports data rates in excess of 600 Mbps, or 300 MHz, while the balanced signal helps reject common-mode noise coupled into the interconnect. Place the driver close to the clock source and route the output as a controlled-impedance differential pair. Account for connector and receiver loading, maintain matched trace lengths, and confirm that the receiving clock device recognizes the LVDS amplitude and threshold before treating the link as operational.
추천
Industrial Point-to-Point Data Link
The DS90LV017M/NOPB is appropriate for a short industrial control or instrumentation link when both endpoints use compatible 3.3 V LVDS signaling. Its single-driver configuration converts one logic signal into a differential pair capable of operation above 600 Mbps, supporting reliable transfer of commands, status data, or synchronized timing signals. Keep the trace pair short where possible, provide a continuous reference plane, and separate it from motor, relay, and switching-power-node routing. Verify industrial EMC, surge, isolation, and environmental requirements at the system level rather than treating the line-driver specification alone as complete qualification.
추천
Embedded Communication Backplane
A DS90LV017M/NOPB can drive a point-to-point channel in an embedded communication system that requires a single differential output rather than a full transceiver. Its greater-than-600-Mbps capability and current-mode output architecture are useful for transferring high-rate commands or data between circuit cards. The transmitter and receiver should use compatible LVDS thresholds, and the PCB or cable interconnect should have defined differential impedance. Avoid sharing the differential pair with unrelated high-current signals, and verify connector geometry, loss, skew, and receiver tolerance across the complete channel.
추천
Test and Measurement Instrumentation
The DS90LV017M/NOPB is useful in test and measurement equipment when a low-voltage logic signal must be transmitted to a remote instrument or daughterboard over a high-speed differential link. Supporting operation above 600 Mbps allows it to carry clock, trigger, or sampled-data signals when the receiving instrument provides compatible LVDS inputs. Preserve signal quality with short traces, symmetric routing, and a solid reference plane. Account for cable loss and test-fixture loading at the intended operating frequency, and confirm that the instrument input can tolerate the differential voltage and common-mode range generated by the driver.
추천
High-Speed Digital Backplane
The DS90LV017M/NOPB can serve as a point-to-point edge on a digital backplane when 3.3 V LVDS is the selected interface standard. The device supports rates above 600 Mbps and limits power dissipation through its current-mode architecture, making it appropriate for transferring clock or data between closely coupled boards. Each signal still requires a compatible receiver, correct differential impedance, and adequate return-path continuity. Evaluate connector and PCB loss, lane-to-lane skew, and power-supply noise during system bring-up; individual driver operation above 600 Mbps does not guarantee compliance with an external interface specification.
추천
Camera and Sensor Data Interface
The DS90LV017M/NOPB can provide a high-speed differential link from a camera, sensor, or image-processing board to a receiver located on another circuit board. Its single-channel LVDS output supports clock or data transfer above 600 Mbps while providing noise immunity benefits associated with balanced signaling. The transmitting logic must meet the driver's input threshold, and the receiving device must provide an LVDS-compatible input with suitable common-mode tolerance. Route the pair over a continuous reference plane, match its geometry and length to the receiver requirement, and test the complete cable-and-connector path because sensor output amplitude and edge-rate limitations may determine the practical link rate.
추천
추천 제품 요약
엔지니어링 참조 데이터: DS90LV017M/NOPB — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | DS90LV017ATMX/NOPB |
|---|---|---|
| Package | 8-pin SOIC | 8-pin SOIC (D) |
| Brand | Texas Instruments | Texas Instruments |
| Device Function | Single LVDS differential line driver | Single high-speed differential driver |
| Number of Drivers | 1 driver | 1 driver |
| Number of Receivers | 0 receivers | 0 receivers |
| Supply Voltage | 3 V to 3.6 V | 3 V to 3.6 V |
| Maximum Data Rate | Greater than 600 Mbps | Greater than 600 Mbps |
| Maximum Signaling Frequency | 300 MHz | 300 MHz |
| Output Architecture | Current-mode differential output | Current-mode differential output |
| Protocol | LVDS | LVDS |
| Operating Temperature | -40°C to +85°C | -40°C to +85°C |
| Mounting Type | Surface mount | Surface mount |
주요 차별점
- Documented same-family drop-in candidate (vs DS90LV017ATMX/NOPB)
- High-speed current-mode operation (vs SN65LVDS1DR)
- Single-driver LVDS interface (vs DS90LV001TMX)
설계 노트
Route the LVDS output as a controlled-impedance differential pair with matched spacing and minimal length. Maintain a continuous reference plane beneath the traces, avoid vias where practical, and keep the pair away from switching nodes and high-current return paths. Differential performance depends on return-path continuity; a split plane beneath the pair can substantially degrade the signal even when the driver operates within its specified data rate.
Confirm the receiver's LVDS input threshold, differential impedance, common-mode range, and termination requirements before fixing the interconnect. Use the manufacturer's receiver and driver documentation to determine whether a termination network is required at the far end. Validate the complete path with an appropriate high-speed measurement setup, since connector and PCB loss can reduce the practical operating rate below the driver's stated greater-than-600-Mbps capability.
Place the DS90LV017M/NOPB close to the source of the signal so that the unterminated single-ended input trace remains short. Keep the logic input away from differential outputs and noisy switching nodes. If the source device has slow or floating output timing, verify that it meets the driver's input thresholds and edge requirements; otherwise, output-state timing may become the limiting factor even when the LVDS link itself is correctly designed.
규정 준수 정보
The component listing identifies the exact ordering code as lead free. Exact RoHS, REACH, halogen-free, and conflict-minerals declarations were not established by the verified information and must be confirmed with Texas Instruments for the exact ordering code.