DSPIC33CK128MP205-E/PT - 16-bit 100MHz DSC 128KB Flash | Microchip
N.º da peça: DSPIC33CK128MP205-E/PT ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $5.62 | $5,62 |
| 10 | $5.05 | $50,50 |
| 100 | $4.48 | $448,00 |
| 500 | $4.02 | $2.010,00 |
| 1.000 | $3.61 | $3.610,00 |
DSPIC33CK128MP205-E/PT Visão geral
A digital signal controller combines the computational throughput of a DSP with the peripheral integration and ease of use of a microcontroller. Within the power-management hierarchy, a DSC such as the dsPIC33CK sits between a general-purpose MCU and a dedicated digital power controller, providing a modified Harvard architecture CPU with DSP instructions, plus high-resolution PWM hardware purpose-built for closed-loop control of power converters and motors.
Key features include the dsPIC33CK single-core CPU operating from 3.0V to 3.6V, high-resolution PWM with 250 ps effective resolution for precision duty-cycle control, CAN FD connectivity for automotive and industrial networks, and on-chip analog integration with three op-amps and three comparators (as listed by Mouser for the 48-pin MP205 variant). Functional-safety (FuSa) support documentation is available per DigiKey categorization.
Architecturally, the modified Harvard core executes from dual-partition Flash supporting live update, with deterministic interrupt latency suited to sub-microsecond control loops. The high-resolution PWM phase outputs, ADC triggering, and comparator outputs are tightly cross-connected internally, enabling peak-current-mode and multiphase topologies without external glue logic.
Typical applications include digital power supplies (totem-pole PFC, LLC), brushless DC and PMSM motor control (FOC), solar micro-inverters, and automotive AEC-Q100-qualified control modules - the family is marketed by Hotenda as Automotive, AEC-Q100 qualified.
Design consideration: operate the device strictly within the 3.0V to 3.6V supply window and budget decoupling on every VDD pair; the 250 ps PWM resolution is only meaningful with clean analog supply routing.
This page synthesizes distributor data, drop-in family alternatives, and practical design notes not consolidated in the manufacturer datasheet.
Alternativas drop-in para DSPIC33CK128MP205-E/PT — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com DSPIC33CK128MP205-E/PT (mesmo formato e footprint) — diferindo em Package, Operating Temperature, Core, CAN Interface, PWM.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
DSPIC33CK128MP205-I/PT
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
DSPIC33CK128MP206-E/PT
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
DSPIC33CK256MP205-E/PT
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$3.92 / unidade
Ver ficha técnica →DSPIC33CK128MP204-E/PT
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
DSPIC33CK64MP205-E/PT
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$1.75 / unidade
Ver ficha técnica →DSPIC33CK128MP205-E/PT Classificações máximas e características elétricas
| Core | dsPIC33CK 16-bit DSC core |
| Max CPU Speed | 100 MHz (100 MIPS) |
| Program Memory (Flash) | 128 KB (128K x 8) |
| Data SRAM | 16 KB |
| Supply Voltage Range | 3.0 V to 3.6 V |
| PWM Resolution | 250 ps (high-resolution PWM) |
| CAN Interface | CAN FD |
| On-chip Op-Amps | 3 |
| On-chip Comparators | 3 |
| Temperatura de operação | -40C to +125C (E grade) |
| Encapsulamento | 48-TQFP (7x7 mm), PT |
| Tipo de montagem | Surface Mount |
| Communication Interfaces | I2C, SPI, UART/USART, LINbus, IrDA, CAN FD |
| Qualification | Automotive, AEC-Q100 (family) |
| Architecture | Modified Harvard, 16-bit fixed-point |
| Status RoHS | Compliant |
Configuração de pinos do DSPIC33CK128MP205-E/PT
| Pino 1 | MCLR — Master clear reset input / programming voltage |
| Pino 2 | AN0/C1IN1-/RA0 — Analog input 0 / comparator 1 input / port A |
| Pino 3 | AN1/C1IN1+/RA1 — Analog input 1 / comparator 1 input / port A |
| Pino 4 | PGD/EMUD1/RP1/RA2 — Programming data / UART or PWM RP1 / port A |
| Pino 5 | PGC/EMUC1/RP2/RA3 — Programming clock / RP2 / port A |
| Pino 6 | AN2/C2IN1-/RA4 — Analog input 2 / comparator 2 input / port A |
| Pino 7 | AN3/C2IN1+/RB0 — Analog input 3 / comparator 2 input / port B |
| Pino 8 | AN4/C1IN2-/OPA1OUT/RB1 — Analog input 4 / op-amp 1 output / port B |
| Pino 9 | AN5/OPA1IN+/RB2 — Analog input 5 / op-amp 1 non-inverting input |
| Pino 10 | OPA1IN-/RB3 — Op-amp 1 inverting input |
| Pino 11 | VDD — Positive supply (3.0V-3.6V) |
| Pino 12 | VSS — Ground reference |
| Pino 13 | AN6/OPA2IN+/RB4 — Analog input 6 / op-amp 2 non-inverting input |
| Pino 14 | OPA2IN-/RB5 — Op-amp 2 inverting input |
| Pino 15 | AN7/OPA2OUT/RB6 — Analog input 7 / op-amp 2 output |
| Pino 16 | AN8/OPA3IN+/RB7 — Analog input 8 / op-amp 3 non-inverting input |
| Pino 17 | OPA3IN-/RB8 — Op-amp 3 inverting input |
| Pino 18 | AN9/OPA3OUT/RB9 — Analog input 9 / op-amp 3 output |
| Pino 19 | AN10/C3IN1-/RB10 — Analog input 10 / comparator 3 input |
| Pino 20 | AN11/C3IN1+/RB11 — Analog input 11 / comparator 3 input |
| Pino 21 | T1CK/RP12/RB12 — Timer 1 clock / RP12 / port B |
| Pino 22 | SOSCI/RP13/RB13 — Secondary oscillator input / RP13 |
| Pino 23 | SOSCO/RP14/RB14 — Secondary oscillator output / RP14 |
| Pino 24 | VSS — Ground reference |
| Pino 25 | PWM1L/RP15/RB15 — High-resolution PWM1 low-side output / RP15 |
| Pino 26 | PWM1H/RC0 — High-resolution PWM1 high-side output |
| Pino 27 | PWM2L/RC1 — High-resolution PWM2 low-side output |
| Pino 28 | PWM2H/RC2 — High-resolution PWM2 high-side output |
| Pino 29 | PWM3L/RC3 — High-resolution PWM3 low-side output |
| Pino 30 | PWM3H/RC4 — High-resolution PWM3 high-side output |
| Pino 31 | AVDD — Analog supply |
| Pino 32 | AVSS — Analog ground |
| Pino 33 | PWM4L/RC5 — High-resolution PWM4 low-side output |
| Pino 34 | PWM4H/RC6 — High-resolution PWM4 high-side output |
| Pino 35 | PWM5L/RC7 — High-resolution PWM5 low-side output |
| Pino 36 | PWM5H/RC8 — High-resolution PWM5 high-side output |
| Pino 37 | VDD — Positive supply (3.0V-3.6V) |
| Pino 38 | VSS — Ground reference |
| Pino 39 | PWM6L/RC9 — High-resolution PWM6 low-side output |
| Pino 40 | PWM6H/RD0 — High-resolution PWM6 high-side output |
| Pino 41 | RP24/RD1 — Remappable peripheral pin RP24 / port D |
| Pino 42 | RP25/RD2 — Remappable peripheral pin RP25 / port D |
| Pino 43 | RP26/RD3 — Remappable peripheral pin RP26 / port D |
| Pino 44 | OSC1/RP27/RD4 — Primary oscillator input / RP27 |
| Pino 45 | OSC2/RP28/RD5 — Primary oscillator output / RP28 |
| Pino 46 | RP29/RD6 — Remappable peripheral pin RP29 / port D |
| Pino 47 | RP30/RD7 — Remappable peripheral pin RP30 / port D |
| Pino 48 | VCAP/VDDCORE — Core regulator capacitor connection |
Aplicações típicas
DSPIC33CK128MP205-E/PT é adequado para 6 aplicaçãos: Digital Power Supplies (PFC / LLC), Brushless Motor Control (FOC), Automotive Control Modules, Solar Micro-Inverters, Industrial Sensing and Control Nodes, Wireless Charging and High-Density Chargers.
Digital Power Supplies (PFC / LLC)
The DSPIC33CK128MP205-E/PT excels in digitally controlled switch-mode power supplies such as totem-pole PFC and LLC resonant converters, where its high-resolution PWM with 250 ps effective resolution enables precise duty-cycle and phase-shift control at switching frequencies above 100 kHz. The three on-chip op-amps buffer current-shunt signals while the three comparators provide cycle-by-cycle overcurrent limiting with nanosecond-class trip latency, offloading fast protection from software. Operating at 100 MIPS, the core closes voltage and current loops at rates well beyond the switching frequency, and the CAN FD interface supports digital telemetry to system hosts in server and telecom rectifiers.
Recomendado
Brushless Motor Control (FOC)
For field-oriented control of BLDC and PMSM motors, the DSPIC33CK128MP205-E/PT integrates everything a 48-pin FOC controller needs: high-resolution PWM driving the three-phase inverter, three on-chip op-amps for in-line or low-side current sensing, and comparators for hardware overcurrent trips. The 100 MHz core executes FOC current loops at 100 kHz-plus with DSP multiply-accumulate instructions, while 128 KB Flash holds sensorless observer algorithms. The -40C to +125C E-grade rating suits sealed motor housings, and AEC-Q100 family qualification supports automotive pumps, fans, and actuators where the CAN FD interface links to the vehicle network.
Recomendado
Automotive Control Modules
The dsPIC33CK family is marketed with Automotive, AEC-Q100 qualification (per distributor listings), making the DSPIC33CK128MP205-E/PT a candidate for automotive subsystem controllers such as LED headlamp drivers, DC-DC auxiliary converters, pump control, and actuator nodes. The -40C to +125C operating range covers under-hood and near-engine environments, and the integrated CAN FD module communicates on modern in-vehicle networks with 64-byte payloads. Functional-safety (FuSa) support documentation simplifies safety-relevant design flows. For production, obtain PPAP documentation from Microchip to satisfy automotive OEM quality requirements alongside the -E temperature grade.
Recomendado
Solar Micro-Inverters
Micro-inverter and power-optimizer designs benefit from the DSPIC33CK128MP205-E/PT's combination of 250 ps PWM resolution for phase-shifted full-bridge and LLC MPPT stages, plus three op-amps that condition panel current and voltage sense signals without external amplifiers. The 100 MIPS core runs MPPT algorithms, grid-synchronization PLLs, and anti-islanding logic concurrently, while 128 KB Flash accommodates grid-certification firmware stacks. The device's deterministic interrupt structure keeps the grid-current control loop phase-consistent, and the E-grade temperature rating tolerates the elevated ambient temperatures typical of rooftop and panel-back-mounted enclosures.
Recomendado
Industrial Sensing and Control Nodes
In industrial automation, the DSPIC33CK128MP205-E/PT serves as an advanced sensing and control node combining analog integration with networking: the three on-chip op-amps amplify bridge and shunt sensor signals, an internal 12-bit ADC samples them, and SPI/I2C/UART plus CAN FD connect to PLC backbones. The 100 MHz core performs DSP filtering (FIR/IIR) on acquired waveforms for predictive-maintenance analytics at the edge. Operating from a standard 3.3V rail with -40C to +125C tolerance, the controller survives electrical-cabinet environments, and 128 KB Flash supports protocol stacks alongside application firmware without external memory.
Recomendado
Wireless Charging and High-Density Chargers
Wireless power transmitter designs leverage the DSPIC33CK128MP205-E/PT's high-resolution PWM for frequency- and duty-controlled resonant half-bridges, its comparators for foreign-object and overcurrent protection, and its CAN/UART interfaces for Qi-class protocol communication with system MCUs. The 100 MIPS throughput sustains closed-loop power control at resonance while computing demodulated communication packets, and the op-amps condition coil current/voltage measurements. The -E temperature grade and AEC-Q100 family qualification suit automotive wireless-charging pads, where thermal environments are severe and functional-safety documentation may be requested by OEM customers.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para DSPIC33CK128MP205-E/PT — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | DSPIC33CK128MP205-I/PT | DSPIC33CK128MP206-E/PT | DSPIC33CK256MP205-E/PT | DSPIC33CK128MP204-E/PT |
|---|---|---|---|---|---|
| Package | 48-TQFP (7x7 mm, PT) | 48-TQFP (7x7 mm) - same | 48-TQFP (7x7 mm) - same | 48-TQFP (7x7 mm) - same | 48-TQFP (7x7 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| CPU Speed | 100 MHz (100 MIPS) | 100 MHz | 100 MHz | 100 MHz | 100 MHz |
| Program Flash | 128 KB | 128 KB | 256 KB | 256 KB | 64 KB |
| SRAM | 16 KB | 16 KB | 24 KB | 24 KB | 16 KB |
| Temperature Range | -40C to +125C (E) | -40C to +85C (I) | -40C to +125C (E) | -40C to +125C (E) | -40C to +125C (E) |
| PWM Resolution | 250 ps (HRPWM) | 250 ps | 250 ps | 250 ps | 250 ps |
| CAN FD | Yes | Yes | Yes | Yes | Yes |
| Op-Amps / Comparators | 3 / 3 | 3 / 3 | 3 / 3 | 3 / 3 | 3 / 3 |
Principais diferenciais
- Extended -40C to +125C temperature grade (vs DSPIC33CK128MP205-I/PT)
- Memory headroom on the same footprint (vs DSPIC33CK128MP206-E/PT)
- Cost-optimized firmware reduction path (vs DSPIC33CK128MP204-E/PT)
- 250 ps high-resolution PWM with integrated analog (vs Functional-only competitors (TI C2000, ST STM32G4))
Notas de projeto
Supply the DSPIC33CK128MP205-E/PT from a clean 3.3V rail within the 3.0V-3.6V window. Decouple each VDD pin with 100 nF ceramic placed within 2 mm of the pin, plus one 4.7-10 uF bulk capacitor near the part. The VCAP pin requires the exact core-regulator capacitor specified in the Microchip datasheet - using the wrong value or ESR destabilizes the internal regulator and causes sporadic resets. Separate AVDD/AVSS via an RC or ferrite filter to preserve ADC accuracy.
Keep high-resolution PWM traces (PWMxH/L) short and away from analog op-amp inputs; the 250 ps PWM edges are fast enough to couple into the analog domain. Route the op-amp feedback network on a quiet analog ground island under AVSS. For motor-control layouts, place the current-shunt amplifier inputs (OPAxIN+/-) as a tightly matched Kelvin pair to the shunt resistor to minimize offset error in FOC current loops.
Do not mix temperature grades across a design revision: the -I/PT variant stops at +85C and will fail field units in +125C enclosures even though the pinout is identical. Verify the dual-partition Flash (live update) programming flow against the current Microchip programming specification before production, and reserve PGD/PGC pins (pins 4-5) exclusively for ICSP - sharing them with peripheral functions complicates in-circuit reprogramming.
Estimated: in a sealed 48-TQFP enclosure, junction temperature approximately equals ambient plus (typical core-peripheral power, order of 150-250 mW at 100 MHz) times the package theta-JA (order of 40-50 C/W for 7x7 TQFP on a 4-layer board), giving a rise of roughly 8-12 C. Confirm exact theta-JA from the Microchip package drawing and derate core frequency in thermally confined housings near +125C ambient.
Informações de conformidade
Distributor listings (Hotenda, DigiKey) identify the dsPIC33CK family as Automotive, AEC-Q100 with Functional Safety (FuSa) support. REACH/halogen/conflict-minerals status not stated in provided data.
