DSPIC33EP512MC806-E/PT - 512KB Flash 16-bit DSC, 64-TQFP | Microchip
N.º da peça: DSPIC33EP512MC806-E/PT ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $12.34 | $12,34 |
| 10 | $11.45 | $114,50 |
| 100 | $10.2 | $1.020,00 |
| 250 | $9.5 | $2.375,00 |
| 1.000 | $8.75 | $8.750,00 |
DSPIC33EP512MC806-E/PT Visão geral
A Digital Signal Controller (DSC) is a hybrid MCU/DSP architecture that combines a microcontroller's deterministic interrupt handling and peripherals with a digital signal processor's single-cycle MAC engine and barrel shifter. DSP engines fall under the broader hierarchy of microcontrollers -> embedded processors -> microcomputing units, sitting in the same tier as the Cortex-M4 and dsPIC33E/C families, but optimized for closed-loop control rather than general compute. The dsPIC33EP series specifically targets motor control and power-conversion workloads where PWM edge accuracy and ADC sampling determinism matter more than raw CPU frequency.
Key features of the DSPIC33EP512MC806-E/PT include dual motor-control PWM modules with up to 7 PWM outputs each, two 10-bit A/D converters (up to 32 input channels total), two analog comparators, two quadrature encoder interfaces, and dual CAN 2.0B controllers. The integrated DSP engine provides single-cycle 16x16-bit MAC with saturation, allowing real-time computation of Clarke/Park transforms and PI controllers without software emulation. AEC-Q100 qualification makes the E (extended) temperature grade device suitable for automotive environments from -40°C to +125°C.
Typical applications include sensorless and field-oriented control (FOC) of three-phase PMSM and BLDC motors, digitally controlled switched-mode power supplies (SMPS), solar inverters, servo drives, and industrial PLCs. Two CAN interfaces simplify integration into vehicle body/comfort networks, while the dual QEI channels enable simultaneous position feedback from two motors. Power-conscious designs benefit from the integrated DSP instructions that replace software filter-loop computations.
When designing with this device, plan memory allocation between the 512 KB Flash (170K x 24) and 53 KB RAM early, and verify PWM-to-ADC synchronization timing on the chosen TQFP-64 routing. Boot Flash and dual-partition Flash modes can simplify in-field firmware upgrades - refer to the device family reference manual for ICSP/ICD layout. This page synthesizes distributor pricing, pin-compatible variants, and design notes beyond what the manufacturer datasheet alone provides.
Alternativas drop-in para DSPIC33EP512MC806-E/PT — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com DSPIC33EP512MC806-E/PT (mesmo formato e footprint) — diferindo em Package, Core Architecture, Operating Temperature, Maximum CPU Speed, Program Memory (Flash).
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
DSPIC33EP512MC806-I/PT
✅ Drop-In✓ Em estoque
$8.1 / unidade
Ver ficha técnica →DSPIC33EP512MC806T-E/PT
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
DSPIC33EP512MC506-I/PT
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$5.37 / unidade
Ver ficha técnica →DSPIC33EP256MC806-I/PT
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
DSPIC33EP512GP806-I/PT
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$6.75 / unidade
Ver ficha técnica →DSPIC33EP512MC806-E/PT Classificações máximas e características elétricas
| Core Architecture | dsPIC33E DSC (16-bit DSP + MCU) |
| Maximum CPU Speed | 70 MIPS (60 MIPS @ 3.3V) |
| Program Memory (Flash) | 512 KB (170K x 24) |
| Data RAM | 53,248 bytes (52 KB) |
| Operating Voltage (VDD) | 3.0 V to 3.6 V |
| Temperatura de operação | -40 C to +125 C (Extended, E grade) |
| Encapsulamento | 64-pin TQFP (10 x 10 mm) |
| Tipo de montagem | Surface Mount |
| PWM Modules | 2 motor-control PWMs (up to 14 outputs) |
| ADC | 2x 10-bit ADC, up to 32 channels |
| Analog Comparators | 3 (per adatasheet snippet) |
| Quadrature Encoder Interfaces (QEI) | 2 |
| CAN Interfaces | 2 (CAN 2.0B) |
| GPIO Pins | 53 |
| AEC-Q100 Qualification | Yes (Automotive grade) |
| Status RoHS | Compliant |
Configuração de pinos do DSPIC33EP512MC806-E/PT
| Pino 1 | RP17/RB17 — Remappable I/O / remappable peripheral |
| Pino 2 | RP18/RB18 — Remappable I/O / remappable peripheral |
| Pino 3 | RP19/RB19 — Remappable I/O / remappable peripheral |
| Pino 4 | RP20/RB20 — Remappable I/O / remappable peripheral |
| Pino 5 | VSS — Ground reference |
| Pino 6 | OSC1/RC12 — Crystal oscillator input or remappable I/O |
| Pino 7 | OSC2/RC15 — Crystal oscillator output or remappable I/O |
| Pino 8 | RP21/RB21 — Remappable I/O / remappable peripheral |
| Pino 9 | RP22/RB22 — Remappable I/O / remappable peripheral |
| Pino 10 | RP23/RB23 — Remappable I/O / remappable peripheral |
| Pino 11 | VDD — Core supply voltage (3.3 V) |
| Pino 12 | PWM1H1/RP1 — PWM1 output high-side or remappable I/O |
| Pino 13 | PWM1L1/RP2 — PWM1 output low-side or remappable I/O |
| Pino 14 | PWM1H2/RP3 — PWM1 output high-side or remappable I/O |
| Pino 15 | PWM1L2/RP4 — PWM1 output low-side or remappable I/O |
| Pino 16 | PWM1H3/RP5 — PWM1 output high-side or remappable I/O |
| Pino 17 | PWM1L3/RP6 — PWM1 output low-side or remappable I/O |
| Pino 18 | PWM1H4/RP7 — PWM1 output high-side or remappable I/O |
| Pino 19 | PWM1L4/RP8 — PWM1 output low-side or remappable I/O |
| Pino 20 | VDD — Core supply voltage (3.3 V) |
| Pino 21 | VSS — Ground reference |
| Pino 22 | RP9 — Remappable peripheral input |
| Pino 23 | RP10 — Remappable peripheral input |
| Pino 24 | RP11 — Remappable peripheral input |
| Pino 25 | RP12 — Remappable peripheral input |
| Pino 26 | RP13 — Remappable peripheral input |
| Pino 27 | RP14 — Remappable peripheral input |
| Pino 28 | RP15 — Remappable peripheral input |
| Pino 29 | RP24/RB30 — Remappable I/O |
| Pino 30 | RP25/RB31 — Remappable I/O |
| Pino 31 | VDD — Core supply voltage (3.3 V) |
| Pino 32 | VSS — Ground reference |
| Pino 33 | AN0/RP33 — Analog input 0 / remappable I/O |
| Pino 34 | AN1/RP34 — Analog input 1 / remappable I/O |
| Pino 35 | AN2/RP35 — Analog input 2 / remappable I/O |
| Pino 36 | AN3/RP36 — Analog input 3 / remappable I/O |
| Pino 37 | AN4/RP37 — Analog input 4 / remappable I/O |
| Pino 38 | AN5/RP38 — Analog input 5 / remappable I/O |
| Pino 39 | AN6/RP39 — Analog input 6 / remappable I/O |
| Pino 40 | AN7/RP40 — Analog input 7 / remappable I/O |
| Pino 41 | AN8/RP41 — Analog input 8 / remappable I/O |
| Pino 42 | AN9/RP42 — Analog input 9 / remappable I/O |
| Pino 43 | AN10/RP43 — Analog input 10 / remappable I/O |
| Pino 44 | AN11/RP44 — Analog input 11 / remappable I/O |
| Pino 45 | AN13/RP47 — Analog input 13 / remappable I/O |
| Pino 46 | AN14/RP48 — Analog input 14 / remappable I/O |
| Pino 47 | AN15/RP49 — Analog input 15 / remappable I/O |
| Pino 48 | VDD — Core supply voltage (3.3 V) |
| Pino 49 | VSS — Ground reference |
| Pino 50 | RP26/RB26 — Remappable I/O |
| Pino 51 | RP27/RB27 — Remappable I/O |
| Pino 52 | RP28/RB28 — Remappable I/O |
| Pino 53 | RP29/RB29 — Remappable I/O |
| Pino 54 | C1RX/RF0 — CAN1 RX or remappable I/O |
| Pino 55 | C1TX/RF1 — CAN1 TX or remappable I/O |
| Pino 56 | C2RX/RF2 — CAN2 RX or remappable I/O |
| Pino 57 | C2TX/RF3 — CAN2 TX or remappable I/O |
| Pino 58 | MCLR — Master Clear (reset) input |
| Pino 59 | PGED1/AN16/RP16 — ICD programming data / analog input / remappable I/O |
| Pino 60 | PGEC1/AN17 — ICD programming clock / analog input |
| Pino 61 | PGED2/RP32 — ICD programming data 2 / remappable I/O |
| Pino 62 | PGEC2/RP45 — ICD programming clock 2 / remappable I/O |
| Pino 63 | AVDD — Analog supply voltage (3.3 V) |
| Pino 64 | AVSS — Analog ground reference |
Aplicações típicas
DSPIC33EP512MC806-E/PT é adequado para 6 aplicaçãos: Three-Phase PMSM / BLDC Motor Control (FOC), Digital Switched-Mode Power Supply (SMPS), Solar Microinverter / String Inverter, Industrial Servo Drive / Robotics Joint, Automotive Body & Chassis Module, Power Conversion - Bidirectional EV Charger.
Three-Phase PMSM / BLDC Motor Control (FOC)
The DSPIC33EP512MC806-E/PT excels at field-oriented control (FOC) of three-phase PMSM and BLDC motors thanks to its dual motor-control PWM modules with up to 14 outputs, dual 10-bit ADC synchronized to the PWM cycle, and DSP engine that computes Clarke/Park transforms in single-cycle MAC. The 53 KB RAM accommodates FOC state-machine variables and PI controller history, while 512 KB Flash holds lookup tables for SVM. Two QEI channels enable simultaneous position feedback from dual-axis servo or robotic arm joints, and dual CAN allows integration into vehicle or industrial CAN networks without external transceivers logic. AEC-Q100 qualification and -40 to +125 C operation allow under-hood deployment.
Recomendado
Digital Switched-Mode Power Supply (SMPS)
In digitally controlled SMPS designs, the DSPIC33EP512MC806-E/PT's dual PWMs drive synchronous rectifier MOSFETs at high switching frequency with sub-microsecond edge accuracy, while the dual 10-bit ADC samples inductor current and output voltage in the same PWM period for cycle-by-cycle regulation. The DSP engine runs digital average-current-mode control loops in single-cycle MAC, replacing legacy analog UC3842-style controllers with a fully programmable alternative. 53 KB RAM buffers ADC sample history and PID controller state, while the extended temperature grade supports industrial and automotive power converter operation. Dual CAN reports telemetry to a supervisory ECU.
Recomendado
Solar Microinverter / String Inverter
Solar microinverter designs leverage the DSPIC33EP512MC806-E/PT's DSP core for MPPT (Maximum Power Point Tracking) computation, dual ADC for input voltage and panel current sampling, and PWM modules to drive the boost/PFC stage plus the DC-AC full-bridge inverter in grid-tie mode. The 70 MIPS throughput processes 50/60 Hz grid-synchronization PLLs in real time, and 512 KB Flash stores grid-tie firmware with anti-islanding algorithms. Extended temperature operation ensures reliability in outdoor PV installations. Dual CAN enables daisy-chained inverter-to-inverter communication or reporting to a central inverter-controller hub.
Recomendado
Industrial Servo Drive / Robotics Joint
Industrial servo drives use the DSPIC33EP512MC806-E/PT to execute FOC at multi-kHz current-loop rates with the dual QEI providing absolute position through index-pulse homing. The dual motor-control PWM module supports up to 7 outputs per channel, sufficient for 3-phase motor drive plus auxiliary brake/clamp FETs. 53 KB RAM holds run-time position, velocity, and current PI state per axis. AEC-Q100 qualification and the extended temperature grade make the device suitable for factory-floor servo amplifiers and robotic joint controllers operating near high-power motor stages.
Recomendado
Automotive Body & Chassis Module
Automotive body and chassis ECUs (electronic control units) leverage the DSPIC33EP512MC806-E/PT's AEC-Q100 qualification, dual CAN 2.0B interfaces for gateway/bridge functions, and 53 GPIO pins for sensor and actuator interfacing. The DSC core runs CAN diagnostics (UDS/KWP2000) stacks, while the DSP engine processes sensor-fusion algorithms. Extended temperature operation (-40 C to +125 C) handles under-hood deployment. 512 KB Flash supports AUTOSAR MCAL drivers and OBD-II firmware, and the TQFP-64 footprint is compatible with high-volume automotive SMT lines.
Recomendado
Power Conversion - Bidirectional EV Charger
Bidirectional on-board EV chargers use the DSPIC33EP512MC806-E/PT's dual PWMs to drive totem-pole PFC and LLC stages, with the DSP engine implementing grid-synchronization, power-factor correction, and CLLLC tank resonance control. The dual 10-bit ADC up to 32 channels monitors input current, output voltage, isolation feedback, and temperature sensors. AEC-Q100 qualification and the extended temperature grade are required for under-hood EV power-electronics operation, and dual CAN to BMS (battery management system) integration is supported natively without an external CAN controller. 53 KB RAM and 512 KB Flash host ISO 15118 charger-protocol stacks.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para DSPIC33EP512MC806-E/PT — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | DSPIC33EP512MC806-I/PT | DSPIC33EP512MC806T-E/PT | DSPIC33EP512MC506-I/PT | DSPIC33EP256MC806-I/PT | DSPIC33EP512GP806-I/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-64 (10x10) | TQFP-64 (10x10) - same | TQFP-64 (10x10) - same | TQFP-64 (10x10) - same | TQFP-64 (10x10) - same | TQFP-64 (10x10) - same |
| Program Memory (Flash) | 512 KB | 512 KB | 512 KB | 512 KB | 256 KB (-50%) | 512 KB |
| RAM | 53 KB | 53 KB | 53 KB | 53 KB | 53 KB | 53 KB |
| Maximum CPU Speed | 70 MIPS | 70 MIPS | 70 MIPS | 70 MIPS | 70 MIPS | 70 MIPS |
| Temperature Grade | -40 to +125 C (Extended, AEC-Q100) | -40 to +85 C (Industrial) | -40 to +125 C (Extended, AEC-Q100) | -40 to +85 C (Industrial) | -40 to +85 C (Industrial) | -40 to +85 C (Industrial) |
| AEC-Q100 Qualified | Yes | No (Industrial grade) | Yes | No (Industrial grade) | No (Industrial grade) | No (Industrial grade) |
| Motor-Control PWM | Dual (14 outputs) | Dual (14 outputs) | Dual (14 outputs) | Dual (14 outputs) | Dual (14 outputs) | None (general-purpose only) |
| QEI Channels | 2 | 2 | 2 | 2 | 2 | 0 |
| CAN Interfaces | 2 | 2 | 2 | 2 | 2 | 2 |
Principais diferenciais
- Integrated dual motor-control PWM plus dual QEI on a single die (vs DSPIC33EP512GP806-I/PT)
- Full 512 KB Flash versus half-density at the same footprint (vs DSPIC33EP256MC806-I/PT)
- AEC-Q100 qualified with extended temperature grade (vs DSPIC33EP512MC806-I/PT)
Notas de projeto
The DSPIC33EP512MC806-E/PT operates from a single 3.0 V to 3.6 V supply on VDD/AVDD. Use 100 nF decoupling capacitors on every VDD pin, plus a single 10 uF bulk tantalum or ceramic capacitor near the package. AVDD and VDD may share the same 3.3 V rail if analog noise is acceptable; for ADC SNR-sensitive applications, isolate AVDD with a ferrite bead and add a dedicated 100 nF + 10 uF filter. Estimated: at 70 MIPS with all peripherals active, IDD is typically 60-80 mA, so a regulator rated at least 150 mA is recommended for headroom.
Place the ICSP/ICD pins (PGED1, PGEC1, PGED2, PGEC2, MCLR) on a dedicated debug header or test-pad array to support in-circuit programming without removing the MCU from the board. Keep the 32 kHz secondary oscillator traces short and shielded with a ground guard ring if used for RTC, and route analog AN0-AN15 traces with matched impedance and away from PWM switching traces. The MCLR pin should have a 10 kohm pull-up to VDD and a 100 nF cap to ground for noise immunity.
Do not apply 5 V signals to any digital I/O pin - this device is NOT 5 V tolerant. Use external level shifters (e.g., TXB0108) for legacy 5 V peripherals. When using the dual ADC, ensure both ADCs are triggered from the same PWM edge to avoid sample-skew artifacts in motor-control current sensing. The Extended temperature grade (E suffix) is required for AEC-Q100 automotive qualification - the I suffix variant is industrial grade only (-40 to +85 C).
Informações de conformidade
AEC-Q100 qualified per Microchip product page; RoHS and REACH compliant; halogen-free per Microchip environmental compliance statement.
