EFM32G230F32G-E-QFN64 - 32MHz ARM Cortex-M3 MCU | Silicon Labs
N.º da peça: EFM32G230F32G-E-QFN64 ✓ AtivoEFM32G230F32G-E-QFN64 Visão geral
A microcontroller is a programmable system-on-chip that integrates a processor core, memory, digital and analog peripherals, and communication interfaces on one semiconductor device. The EFM32G series belongs to the Gecko low-power microcontroller family and is based on the ARM Cortex-M3 processor architecture. This hierarchy places the device between general-purpose embedded processors and highly integrated system-on-chip designs, while retaining deterministic real-time control capabilities.
Three headline features make the EFM32G230F32G-E-QFN64 suitable for compact embedded products. Its 32 MHz Cortex-M3 core supports responsive control workloads, while the EFM32G platform consumes as little as 0.6 microamps in Stop mode. Run-mode consumption is listed at 180 microamps per megahertz, making low-energy operation practical for battery-powered sensors, portable instruments, and industrial nodes that spend substantial time between active processing periods.
The device includes 32 KB of Flash and 8 KB of RAM, providing separate nonvolatile program storage and volatile working memory. Its peripheral integration includes 56 digital I/O pins and three 16-bit timers, which support periodic sensing, timing, motor-control, and communications tasks. The autonomous peripheral architecture allows timers and communication functions to execute with limited processor intervention, helping reduce both response latency and overall energy use.
Typical uses include low-power sensor nodes, industrial condition-monitoring equipment, compact data loggers, building-control endpoints, battery-powered handheld instruments, and embedded control systems with multiple digital interfaces. The 64-QFN 9 x 9 mm package supports dense board layouts while exposing substantially more I/O than smaller microcontroller packages. Its power-focused architecture is particularly relevant when the design must remain responsive without continuously running the processor at full speed.
Designers should pay close attention to decoupling, exposed-pad layout, clock stability, and the power budget across active and sleep modes. The 64-QFN package requires careful thermal and electrical implementation, including a properly connected thermal pad according to the manufacturer land pattern. Firmware should also use the device's low-energy modes and autonomous peripherals rather than relying only on busy-wait loops.
This product page consolidates the essential EFM32G230F32G-E-QFN64 specifications, sourcing guidance, family alternatives, and practical design considerations into one engineering-focused reference. It also distinguishes confirmed capabilities from parameters that require confirmation in the manufacturer datasheet before a new design reaches schematic or PCB release.
Alternativas drop-in para EFM32G230F32G-E-QFN64 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com EFM32G230F32G-E-QFN64 (mesmo formato e footprint) — diferindo em Flash Memory, Package, Run Mode Current, Stop Mode Current, Digital I/O Pins.
EFM32G230F32-QFN64
✅ Drop-InConsulte o preço
Ver ficha técnica →EFM32G230F64-QFN64
✅ Drop-InConsulte o preço
Ver ficha técnica →EFM32G230F64G-E-QFN64
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
EFM32G230F128-QFN64
✅ Drop-InConsulte o preço
Ver ficha técnica →EFM32G230F32G-E-QFN64 Classificações máximas e características elétricas
| Processor Core | ARM Cortex-M3 |
| Architecture | 32-bit |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 32 KB |
| RAM | 8 KB |
| Digital I/O Pins | 56 pins |
| Timers | 3 x 16-bit |
| Stop Mode Current | 0.6 microamps |
| Run Mode Current | 180 microamps/MHz |
| Encapsulamento | 64-QFN, 9 x 9 mm |
| Tipo de montagem | Surface mount |
| Product Family | EFM32 Gecko |
| Status RoHS | Compliant |
Guia de Configuração de Pinos do EFM32G230F32G-E-QFN64 64-qfn, 9 x 9 mm
Configuração de pinos para EFM32G230F32G-E-QFN64 (pacote 64-qfn, 9 x 9 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para EFM32G230F32G-E-QFN64.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
EFM32G230F32G-E-QFN64 é adequado para 6 aplicaçãos: Battery-Powered Sensor Nodes, Industrial Condition Monitoring, Compact Data Loggers, Low-Power Building Control, Portable Measurement Instruments, Battery-Powered Handheld Controls.
Battery-Powered Sensor Nodes
The EFM32G230F32G-E-QFN64 fits battery-powered sensor nodes that periodically sample environmental or industrial parameters and transmit results through a low-power communications module. Its 32 MHz ARM Cortex-M3 core provides responsive control processing, while the documented 0.6 microamp Stop-mode current supports long sleep intervals between measurements. The 180 microamps-per-megahertz Run-mode figure also helps engineers establish an initial energy budget. Use autonomous timer functions for periodic sampling, keep analog and radio circuitry disabled between events, and select a regulator whose quiescent current complements the MCU's low-power behavior.
Recomendado
Industrial Condition Monitoring
The EFM32G230F32G-E-QFN64 is appropriate for industrial condition-monitoring equipment that watches motors, pumps, or machinery for vibration, temperature, and state changes. Its three 16-bit timers can support periodic sampling and timeout functions, while 56 digital I/O pins simplify connection of sensors, alarm inputs, and status indicators. The 64-QFN 9 x 9 mm package keeps the controller compact without limiting digital connectivity. Firmware can use low-energy operation between samples, avoiding continuous processing when only threshold monitoring is required. Industrial equipment design should also account for the operating-temperature grade and isolation requirements listed in the device-specific documentation.
Recomendado
Compact Data Loggers
The EFM32G230F32G-E-QFN64 can serve as the control processor in a compact data logger that records sensor readings, timestamps events, and transfers data when a host is available. Its 32 KB of Flash provides nonvolatile firmware storage, 8 KB of RAM supports working buffers, and the three 16-bit timers can establish regular logging intervals. The 56 available digital I/O pins permit connections to sensors, storage-control signals, and status LEDs. For duty-cycled logging, use Stop mode between records and wake through an RTC or timer event to minimize energy use. Validate flash endurance against the expected write rate before defining the retention period.
Recomendado
Low-Power Building Control
The EFM32G230F32G-E-QFN64 supports energy-aware building-control endpoints such as room sensors, occupancy nodes, and small actuator controllers. Its 56 digital I/O pins are useful for discrete inputs, alarm outputs, and local indicators, while three 16-bit timers can manage debounce, sampling, and actuator timing. The family's low Stop-mode current is valuable in equipment that remains connected to distributed power yet operates intermittently. A practical design should disable unused peripherals, use GPIO wake events where appropriate, and separate sensitive analog measurement paths from switching activity. Confirm the exact suffix's analog and communication functions in the manufacturer peripheral table.
Recomendado
Portable Measurement Instruments
The EFM32G230F32G-E-QFN64 is suitable for portable measurement instruments where deterministic control, low standby consumption, and local data processing are required. The 32 MHz Cortex-M3 core can execute acquisition sequencing and user-interface logic, while three 16-bit timers support sampling cadence and time-base functions. Its 32 KB Flash and 8 KB RAM are appropriate for compact firmware that does not require large display buffers or extensive protocol libraries. The 64-QFN package reduces board area while retaining 56 digital I/O pins. Engineers should evaluate analog-channel accuracy separately from CPU performance and preserve the manufacturer's recommended grounding and decoupling arrangement for measurement accuracy.
Recomendado
Battery-Powered Handheld Controls
The EFM32G230F32G-E-QFN64 fits low-power handheld controls that monitor buttons or sensors and provide simple feedback through LEDs, buzzers, or a serial display. The 32 MHz Cortex-M3 core leaves performance margin for user-interface logic, while the family's 0.6 microamp Stop-mode current supports long standby periods. Its 56 digital I/O pins provide ample connections for controls and status signals in a 9 x 9 mm 64-QFN package. Design the firmware around event-driven wake-up and autonomous timers rather than continuous polling. Battery performance should be calculated using actual radio, display, and sensor duty cycles because the MCU's operating-current figures represent only part of the complete system load.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para EFM32G230F32G-E-QFN64 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | EFM32G230F32-QFN64 | EFM32G230F64-QFN64 | EFM32G230F64G-E-QFN64 | EFM32G230F128-QFN64 |
|---|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 64-QFN (9 x 9 mm) | 64-QFN (9 x 9 mm) | 64-QFN (9 x 9 mm) | 64-QFN (9 x 9 mm) | 64-QFN (9 x 9 mm) |
| Processor Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 32 KB | 32 KB | 64 KB | 64 KB | 128 KB |
| RAM | 8 KB | 8 KB | 16 KB | 16 KB | 16 KB |
| Digital I/O Pins | 56 pins | 56 pins | 56 pins | 56 pins | 56 pins |
Principais diferenciais
- Lower memory requirement within the same package family (vs EFM32G230F64-QFN64)
- More compact firmware storage than the F128 family option (vs EFM32G230F128-QFN64)
- Same CPU speed and I/O capacity as the same-family alternatives (vs EFM32G230F64-QFN64)
- Shared low-power platform across documented replacements (vs EFM32G230F128-QFN64)
Notas de projeto
Follow the Silicon Labs QFN land pattern exactly and connect the exposed thermal pad to the ground plane using the recommended via pattern. Keep the MCU's supply bypass capacitors close to their corresponding pins and provide a low-impedance return path beneath the device. Because the 64-QFN package has no large exposed leads, assembly and inspection depend heavily on the solder mask and land definition shown in the manufacturer package drawing.
Build the power budget from the documented 180 microamps-per-megahertz Run-mode value, the 0.6 microamp Stop-mode value, and the actual peripheral duty cycle. Do not assume the family-wide minimum applies to the complete board, since sensors, radio circuitry, pull resistors, and regulators can dominate standby consumption. Use the device-specific operating-current conditions and wake-up behavior from the manufacturer datasheet when sizing the battery and regulator.
Do not select a higher-memory family member solely because its pin count matches. Although the listed EFM32G230 variants share the 64-QFN footprint and 32 MHz Cortex-M3 architecture, firmware and peripheral requirements must still be checked. Also avoid treating the EFM32G230F32 and F32G-E ordering identifiers as automatically interchangeable without confirming the manufacturer's suffix definitions, temperature grade, lifecycle, and ordering information.
Place external crystals, load capacitors, and other clock components according to the manufacturer reference layout when the selected configuration uses a crystal oscillator. Route high-speed or sensitive signals away from switching regulators and antenna coupling areas, and provide a quiet ground reference for analog measurements. For low-power operation, verify that every external circuit entering Stop mode cannot leak enough current to dominate the MCU's 0.6 microamp sleep-state target.
Informações de conformidade
The product listing identifies the microcontroller family as RoHS compliant. No specific REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact ordering suffix.