Silicon Labs

EFM32G230F32G-E-QFN64 - 32MHz ARM Cortex-M3 MCU | Silicon Labs

MPN: EFM32G230F32G-E-QFN64 ✓ 啟用中
0.6 microamps Id 64-QFN, 9 x 9 mm Package 32 MHz Speed 32 KB Memory
MOQ: 1 |

EFM32G230F32G-E-QFN64 概覽

Silicon Labs EFM32G230F32G-E-QFN64 is a 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz, with 32 KB of Flash memory, 8 KB of RAM, and 56 digital I/O pins in a 64-QFN 9 x 9 mm package. It combines autonomous peripherals, fast wake-up capability, and low-power operation for energy-sensitive embedded systems.

A microcontroller is a programmable system-on-chip that integrates a processor core, memory, digital and analog peripherals, and communication interfaces on one semiconductor device. The EFM32G series belongs to the Gecko low-power microcontroller family and is based on the ARM Cortex-M3 processor architecture. This hierarchy places the device between general-purpose embedded processors and highly integrated system-on-chip designs, while retaining deterministic real-time control capabilities.

Three headline features make the EFM32G230F32G-E-QFN64 suitable for compact embedded products. Its 32 MHz Cortex-M3 core supports responsive control workloads, while the EFM32G platform consumes as little as 0.6 microamps in Stop mode. Run-mode consumption is listed at 180 microamps per megahertz, making low-energy operation practical for battery-powered sensors, portable instruments, and industrial nodes that spend substantial time between active processing periods.

The device includes 32 KB of Flash and 8 KB of RAM, providing separate nonvolatile program storage and volatile working memory. Its peripheral integration includes 56 digital I/O pins and three 16-bit timers, which support periodic sensing, timing, motor-control, and communications tasks. The autonomous peripheral architecture allows timers and communication functions to execute with limited processor intervention, helping reduce both response latency and overall energy use.

Typical uses include low-power sensor nodes, industrial condition-monitoring equipment, compact data loggers, building-control endpoints, battery-powered handheld instruments, and embedded control systems with multiple digital interfaces. The 64-QFN 9 x 9 mm package supports dense board layouts while exposing substantially more I/O than smaller microcontroller packages. Its power-focused architecture is particularly relevant when the design must remain responsive without continuously running the processor at full speed.

Designers should pay close attention to decoupling, exposed-pad layout, clock stability, and the power budget across active and sleep modes. The 64-QFN package requires careful thermal and electrical implementation, including a properly connected thermal pad according to the manufacturer land pattern. Firmware should also use the device's low-energy modes and autonomous peripherals rather than relying only on busy-wait loops.

This product page consolidates the essential EFM32G230F32G-E-QFN64 specifications, sourcing guidance, family alternatives, and practical design considerations into one engineering-focused reference. It also distinguishes confirmed capabilities from parameters that require confirmation in the manufacturer datasheet before a new design reaches schematic or PCB release.

直接替換替代品,適用於 EFM32G230F32G-E-QFN64 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: EFM32G230F32G-E-QFN64 (相同外形與佔位) — 差異在於 Flash Memory, Package, Run Mode Current, Stop Mode Current, Digital I/O Pins.

Silicon Labs
Flash Memory: 128 kB
Package: 64-QFN (9 x 9 mm), exposed pad
Run Mode Current: 180 µA/MHz
比較對象 EFM32G230F32G-E-QFN64 →
Silicon Labs
Run Mode Current: 180 uA/MHz
Stop Mode Current: 0.6 uA
比較對象 EFM32G230F32G-E-QFN64 →
Silicon Labs
Flash Memory: 64 kB (64K x 8)
Package: 64-QFN (9 x 9 mm)
Digital I/O Pins: 56
比較對象 EFM32G230F32G-E-QFN64 →

EFM32G230F32-QFN64

✅ 直接替換
Silicon Labs
📦 64-QFN (9 x 9 mm)
32-bit ARM Cortex-M3 microcontroller · EFM32 Gecko · 32 MHz · ARM Cortex-M3 · 32 kB · 8 kB · 56 pins · 3 x 16-bit

聯絡詢價

查看資料表 →

EFM32G230F64-QFN64

✅ 直接替換
Silicon Labs
📦 64-QFN (9 x 9 mm)
32-bit ARM Cortex-M3 microcontroller · ARM Cortex-M3 · 32 MHz · 64 kB (64K x 8) · 16 kB · 56 · 3 x 16-bit timers · 1.98 V to 3.8 V

聯絡詢價

查看資料表 →

EFM32G230F64G-E-QFN64

✅ 直接替換
📦 64-QFN (9 x 9 mm)
Same G-E ordering family with 64 KB Flash and 16 KB RAM; memory is 100% higher than the 32 KB Flash and 8 KB RAM target.

📋 參考替代品(不在目錄中)

EFM32G230F128-QFN64

✅ 直接替換
Silicon Labs
📦 64-QFN (9 x 9 mm)
32-bit ARM Cortex-M3 microcontroller · 32 MHz · 128 kB · 16 kB · 56 pins · 3 timers · 16-bit · 2.5 V or 3.3 V

聯絡詢價

查看資料表 →

EFM32G230F32G-E-QFN64 最大額定值與電氣特性

Processor Core ARM Cortex-M3
Architecture 32-bit
Maximum CPU Frequency 32 MHz
Flash Memory 32 KB
RAM 8 KB
Digital I/O Pins 56 pins
Timers 3 x 16-bit
Stop Mode Current 0.6 microamps
Run Mode Current 180 microamps/MHz
封裝 64-QFN, 9 x 9 mm
安裝類型 Surface mount
Product Family EFM32 Gecko
RoHS 狀態 Compliant

EFM32G230F32G-E-QFN64 64-qfn, 9 x 9 mm 腳位配置指南

EFM32G230F32G-E-QFN64(64-qfn, 9 x 9 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。

EFM32G230F32G-E-QFN64 的 64-qfn, 9 x 9 mm 封裝腳位圖

無詳細腳位定義資料: EFM32G230F32G-E-QFN64.

請參閱 資料表 以查看完整腳位配置。

典型應用

EFM32G230F32G-E-QFN64 適用於 6 應用s: Battery-Powered Sensor Nodes, Industrial Condition Monitoring, Compact Data Loggers, Low-Power Building Control, Portable Measurement Instruments, Battery-Powered Handheld Controls.

🧩

Battery-Powered Sensor Nodes

The EFM32G230F32G-E-QFN64 fits battery-powered sensor nodes that periodically sample environmental or industrial parameters and transmit results through a low-power communications module. Its 32 MHz ARM Cortex-M3 core provides responsive control processing, while the documented 0.6 microamp Stop-mode current supports long sleep intervals between measurements. The 180 microamps-per-megahertz Run-mode figure also helps engineers establish an initial energy budget. Use autonomous timer functions for periodic sampling, keep analog and radio circuitry disabled between events, and select a regulator whose quiescent current complements the MCU's low-power behavior.

🏭

Industrial Condition Monitoring

The EFM32G230F32G-E-QFN64 is appropriate for industrial condition-monitoring equipment that watches motors, pumps, or machinery for vibration, temperature, and state changes. Its three 16-bit timers can support periodic sampling and timeout functions, while 56 digital I/O pins simplify connection of sensors, alarm inputs, and status indicators. The 64-QFN 9 x 9 mm package keeps the controller compact without limiting digital connectivity. Firmware can use low-energy operation between samples, avoiding continuous processing when only threshold monitoring is required. Industrial equipment design should also account for the operating-temperature grade and isolation requirements listed in the device-specific documentation.

📱

Compact Data Loggers

The EFM32G230F32G-E-QFN64 can serve as the control processor in a compact data logger that records sensor readings, timestamps events, and transfers data when a host is available. Its 32 KB of Flash provides nonvolatile firmware storage, 8 KB of RAM supports working buffers, and the three 16-bit timers can establish regular logging intervals. The 56 available digital I/O pins permit connections to sensors, storage-control signals, and status LEDs. For duty-cycled logging, use Stop mode between records and wake through an RTC or timer event to minimize energy use. Validate flash endurance against the expected write rate before defining the retention period.

🏠

Low-Power Building Control

The EFM32G230F32G-E-QFN64 supports energy-aware building-control endpoints such as room sensors, occupancy nodes, and small actuator controllers. Its 56 digital I/O pins are useful for discrete inputs, alarm outputs, and local indicators, while three 16-bit timers can manage debounce, sampling, and actuator timing. The family's low Stop-mode current is valuable in equipment that remains connected to distributed power yet operates intermittently. A practical design should disable unused peripherals, use GPIO wake events where appropriate, and separate sensitive analog measurement paths from switching activity. Confirm the exact suffix's analog and communication functions in the manufacturer peripheral table.

🖥️

Portable Measurement Instruments

The EFM32G230F32G-E-QFN64 is suitable for portable measurement instruments where deterministic control, low standby consumption, and local data processing are required. The 32 MHz Cortex-M3 core can execute acquisition sequencing and user-interface logic, while three 16-bit timers support sampling cadence and time-base functions. Its 32 KB Flash and 8 KB RAM are appropriate for compact firmware that does not require large display buffers or extensive protocol libraries. The 64-QFN package reduces board area while retaining 56 digital I/O pins. Engineers should evaluate analog-channel accuracy separately from CPU performance and preserve the manufacturer's recommended grounding and decoupling arrangement for measurement accuracy.

📱

Battery-Powered Handheld Controls

The EFM32G230F32G-E-QFN64 fits low-power handheld controls that monitor buttons or sensors and provide simple feedback through LEDs, buzzers, or a serial display. The 32 MHz Cortex-M3 core leaves performance margin for user-interface logic, while the family's 0.6 microamp Stop-mode current supports long standby periods. Its 56 digital I/O pins provide ample connections for controls and status signals in a 9 x 9 mm 64-QFN package. Design the firmware around event-driven wake-up and autonomous timers rather than continuous polling. Battery performance should be calculated using actual radio, display, and sensor duty cycles because the MCU's operating-current figures represent only part of the complete system load.

What are the key specifications of EFM32G230F32G-E-QFN64 that engineers should know?
The EFM32G230F32G-E-QFN64 combines a 32 MHz ARM Cortex-M3 core with 32 KB of Flash, 8 KB of RAM, 56 digital I/O pins, and three 16-bit timers in a 64-QFN package. According to the Silicon Labs EFM32G datasheet, the low-power platform can reach 0.6 microamps in Stop mode and consumes 180 microamps per megahertz in Run mode. These specifications make the MCU suitable for compact, energy-sensitive embedded products requiring real-time control and extensive digital connectivity.
Where can I download the EFM32G230F32G-E-QFN64 datasheet PDF?
The EFM32G230F32G-E-QFN64 datasheet PDF is available through the Silicon Labs EFM32G technical documentation linked in this page's manufacturer resources. The document covers the Cortex-M3 processor, memory, peripherals, electrical characteristics, package information, and low-power operating modes. Use the manufacturer document as the controlling source for pin assignments, recommended circuits, decoupling, clock requirements, and PCB land-pattern dimensions before releasing a design.
Where can I find the EFM32G230F32G-E-QFN64 pinout and package drawing?
Use the pin-description table and package drawing in the Silicon Labs EFM32G datasheet to obtain the authoritative EFM32G230F32G-E-QFN64 pinout and 64-QFN land pattern. The device is supplied in a 64-QFN 9 x 9 mm package, but the complete numbered pin list is not reproduced on this page. The package drawing should also be checked for exposed-pad geometry, solder-mask details, and thermal-land requirements.
Is the EFM32G230F32G-E-QFN64 suitable for battery-powered applications?
The EFM32G230F32G-E-QFN64 is suitable for battery-powered applications because the EFM32G platform offers 0.6 microamp Stop-mode current and 180 microamps per megahertz in Run mode. According to the Silicon Labs EFM32G datasheet, these figures reflect the family's low-power design, including fast wake-up and autonomous peripheral operation. Actual battery life still depends on wake frequency, active workload, radio duty cycle, sensor load, and regulator efficiency.
What is the difference between EFM32G230F32G-E-QFN64 and EFM32G230F64-QFN64?
The EFM32G230F32G-E-QFN64 provides 32 KB of Flash and 8 KB of RAM, while the EFM32G230F64-QFN64 provides 64 KB of Flash and 16 KB of RAM. Both are 32 MHz ARM Cortex-M3 Gecko microcontrollers in the 64-QFN 9 x 9 mm family, and both list 56 digital I/O pins and three 16-bit timers. The F64 option is preferable when firmware size or working-memory requirements exceed the F32 device's capacity.
When should I choose EFM32G230F32G-E-QFN64 over EFM32G230F64-QFN64?
Choose the EFM32G230F32G-E-QFN64 when 32 KB of Flash and 8 KB of RAM are sufficient and minimizing board area and memory requirements is important. Select the EFM32G230F64-QFN64 when the application needs up to 64 KB of Flash and 16 KB of RAM. Both devices target the same 32 MHz Cortex-M3 low-power architecture and use the 64-QFN 9 x 9 mm package, but the F64 variant offers twice the stated memory capacity.
What can replace the EFM32G230F32G-E-QFN64?
The closest documented same-family drop-in candidates are EFM32G230F32-QFN64, EFM32G230F64-QFN64, EFM32G230F64G-E-QFN64, and EFM32G230F128-QFN64. They share the EFM32G230 architecture, 32 MHz Cortex-M3 core, and 64-QFN 9 x 9 mm package, while differing primarily in Flash and RAM capacity. Confirm peripheral availability, temperature grade, suffix interpretation, and pin compatibility against the manufacturer datasheet before substitution.
Is EFM32G230F32G-E-QFN64 the same as EFM32G230F32-QFN64?
The EFM32G230F32G-E-QFN64 and EFM32G230F32-QFN64 both identify the 32 MHz Cortex-M3 EFM32G230F32 configuration in a 64-QFN 9 x 9 mm package with 32 KB of Flash and 8 KB of RAM. Their ordering suffixes may indicate different commercial or environmental classifications, so they should not be treated as equivalent without checking the manufacturer's ordering information. Function, package, and firmware compatibility should be verified before replacing one suffix with the other.
What is the best cross-brand equivalent for EFM32G230F32G-E-QFN64?
No verified cross-brand drop-in equivalent is established for the EFM32G230F32G-E-QFN64. The documented alternatives remain within the Silicon Labs EFM32G230 family and preserve the same 64-QFN footprint. A cross-brand MCU would require exact peripheral, interrupt, GPIO, power, clock, and software compatibility, and no manufacturer cross-reference confirming those requirements appears in the available substitution results.
Where can I buy EFM32G230F32G-E-QFN64 online?
Use the Request a Quote form on this page to request EFM32G230F32G-E-QFN64 availability, current commercial terms, and a shipment quotation. The form is the appropriate route for confirming exact-suffix supply, order quantity, and lead time without relying on a stale listing. Provide the target package and tape-and-reel requirements with the request so the supplier can confirm the correct ordering configuration.
What is the price of EFM32G230F32G-E-QFN64?
The current commercial price for EFM32G230F32G-E-QFN64 should be requested through the Request a Quote form on this page. Pricing can vary with exact suffix, order quantity, packaging, and supply status, so a historical listing figure may not represent the current orderable configuration. Submit the required quantity and intended package details with the request to obtain a current quotation.
What is the lead time for EFM32G230F32G-E-QFN64?
Request the current EFM32G230F32G-E-QFN64 lead time through the Request a Quote form on this page. Lead time depends on exact suffix, package format, order quantity, and manufacturer inventory, none of which can be established reliably from a general listing. Include your production quantity and required delivery date so scheduling can be evaluated against the requested commitment.
Is EFM32G230F32G-E-QFN64 in stock?
Current stock for the exact EFM32G230F32G-E-QFN64 suffix should be confirmed through the Request a Quote form on this page. Listings may represent different quantity tiers, package configurations, or regional inventory, so a general availability statement is not sufficient for production planning. Submit the required quantity, packaging preference, and target date for a stock confirmation and delivery schedule.
How much power does the EFM32G230F32G-E-QFN64 consume in Run mode?
The EFM32G family consumes 180 microamps per megahertz in Run mode according to the Silicon Labs EFM32G datasheet. At the maximum 32 MHz operating frequency, this listed rate corresponds to approximately 5.76 milliamps for the processor-related Run-mode term, although the complete device current also depends on peripherals, I/O loading, voltage, and operating conditions. Use the datasheet test conditions for final battery-budget calculations.
What peripherals and interfaces are included in the EFM32G230F32G-E-QFN64?
The documented EFM32G230F32G-E-QFN64 includes 56 digital I/O pins and three 16-bit timers alongside its 32 MHz ARM Cortex-M3 core, 32 KB of Flash, and 8 KB of RAM. According to the Silicon Labs product documentation, the family also features autonomous peripherals and high analog integration. The exact serial-interface, ADC, analog, and communications options assigned to this suffix must be confirmed from the device-specific pin and peripheral tables.

工程參考資料,適用於 EFM32G230F32G-E-QFN64 — 比較、設計指引及合規資訊。

選型指南

Choose the EFM32G230F32G-E-QFN64 when a design needs a 32 MHz ARM Cortex-M3 controller, 56 digital I/O pins, three 16-bit timers, and low-power operation in a 64-QFN 9 x 9 mm package, while 32 KB of Flash and 8 KB of RAM are sufficient. Choose EFM32G230F32-QFN64 when its ordering suffix better matches the required qualification or procurement configuration, after confirming the manufacturer's suffix definitions. Choose EFM32G230F64-QFN64 or EFM32G230F64G-E-QFN64 when firmware and working-memory requirements call for 64 KB of Flash and 16 KB of RAM. Choose EFM32G230F128-QFN64 for as much as 128 KB of Flash. All four documented alternatives preserve the EFM32G230 package and processing platform, but none should be substituted without checking peripheral availability, temperature rating, qualification, and firmware requirements.

與替代品比較

參數 本產品 EFM32G230F32-QFN64 EFM32G230F64-QFN64 EFM32G230F64G-E-QFN64 EFM32G230F128-QFN64
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Package 64-QFN (9 x 9 mm) 64-QFN (9 x 9 mm) 64-QFN (9 x 9 mm) 64-QFN (9 x 9 mm) 64-QFN (9 x 9 mm)
Processor Core ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz
Flash Memory 32 KB 32 KB 64 KB 64 KB 128 KB
RAM 8 KB 8 KB 16 KB 16 KB 16 KB
Digital I/O Pins 56 pins 56 pins 56 pins 56 pins 56 pins

主要差異化特點

  • Lower memory requirement within the same package family (對比EFM32G230F64-QFN64)
  • More compact firmware storage than the F128 family option (對比EFM32G230F128-QFN64)
  • Same CPU speed and I/O capacity as the same-family alternatives (對比EFM32G230F64-QFN64)
  • Shared low-power platform across documented replacements (對比EFM32G230F128-QFN64)

設計說明

Follow the Silicon Labs QFN land pattern exactly and connect the exposed thermal pad to the ground plane using the recommended via pattern. Keep the MCU's supply bypass capacitors close to their corresponding pins and provide a low-impedance return path beneath the device. Because the 64-QFN package has no large exposed leads, assembly and inspection depend heavily on the solder mask and land definition shown in the manufacturer package drawing.

Build the power budget from the documented 180 microamps-per-megahertz Run-mode value, the 0.6 microamp Stop-mode value, and the actual peripheral duty cycle. Do not assume the family-wide minimum applies to the complete board, since sensors, radio circuitry, pull resistors, and regulators can dominate standby consumption. Use the device-specific operating-current conditions and wake-up behavior from the manufacturer datasheet when sizing the battery and regulator.

Do not select a higher-memory family member solely because its pin count matches. Although the listed EFM32G230 variants share the 64-QFN footprint and 32 MHz Cortex-M3 architecture, firmware and peripheral requirements must still be checked. Also avoid treating the EFM32G230F32 and F32G-E ordering identifiers as automatically interchangeable without confirming the manufacturer's suffix definitions, temperature grade, lifecycle, and ordering information.

Place external crystals, load capacitors, and other clock components according to the manufacturer reference layout when the selected configuration uses a crystal oscillator. Route high-speed or sensitive signals away from switching regulators and antenna coupling areas, and provide a quiet ground reference for analog measurements. For low-power operation, verify that every external circuit entering Stop mode cannot leak enough current to dominate the MCU's 0.6 microamp sleep-state target.

合規資訊

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The product listing identifies the microcontroller family as RoHS compliant. No specific REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact ordering suffix.

相關搜尋

EFM32G230F32G-E-QFN64 datasheet EFM32G230F32G-E-QFN64 datasheet pdf EFM32G230F32G-E-QFN64 pinout EFM32G230F32G-E-QFN64 equivalent EFM32G230F32G-E-QFN64 replacement EFM32G230F32G-E-QFN64 cross reference EFM32G230F32G-E-QFN64 price EFM32G230F32G-E-QFN64 stock EFM32G230F32G-E-QFN64 64-QFN footprint EFM32G230F32G-E-QFN64 vs EFM32G230F64-QFN64 Silicon Labs EFM32G230F32G-E-QFN64 EFM32G230F32 32MHz Cortex-M3 microcontroller

相關元件與詞彙

Silicon Labs EFM32G230F32G-E-QFN64 EFM32G230F32-QFN64 EFM32G230F64-QFN64 EFM32G230F64G-E-QFN64 EFM32G230F128-QFN64 EFM32G230 EFM32 Gecko ARM Cortex-M3 microcontroller MCU embedded microcontroller system-on-chip semiconductor low-power computing 64-QFN QFN family surface-mount package 32 KB Flash 8 KB RAM 56 digital I/O pins 16-bit timer Stop mode Run mode autonomous peripherals
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情