EFM32LG942F64-QFP64 - 48MHz Cortex-M3 MCU | Silicon Labs
N.º da peça: EFM32LG942F64-QFP64 ✓ AtivoEFM32LG942F64-QFP64 Visão geral
A microcontroller is a programmable semiconductor that combines a processor core, memory, peripherals, and communication interfaces on one integrated circuit. The EFM32LG belongs to the Leopard Gecko family, a 32-bit MCU family positioned for low-power embedded control. Its hierarchy extends from the EFM32LG series to the Arm Cortex-M3 processor class, general-purpose microcontrollers, and embedded semiconductors.
The EFM32LG942F64-QFP64 emphasizes energy-efficient operation. Silicon Labs specifies consumption as low as 0.65 µA in Stop mode and 211 µA/MHz in Run mode. Autonomous peripherals can perform designated tasks while the processor sleeps, reducing the energy required for sensor acquisition, timing, communications, and control-loop operation. The 64 KB Flash configuration supports firmware storage, while 32 KB of RAM accommodates working data, stack space, and peripheral buffers.
Its 32-bit Arm Cortex-M3 core combines deterministic interrupt handling with an efficient instruction set and operates at up to 48 MHz. The device also integrates extensive analog and digital resources into the same package. This high level of integration can reduce external component count on compact sensor nodes, industrial control modules, and connected accessories while preserving a common peripheral architecture across the EFM32LG family.
Typical uses include battery-powered environmental sensors, building-control endpoints, industrial monitoring nodes, compact health-and-wellbeing products, and low-power wireless accessories. The Stop-mode current is particularly relevant to devices that spend most of their operating cycle asleep and wake periodically to measure or transmit information. The 48 MHz processing rate also provides enough performance for protocol handling, local filtering, and control without requiring a higher-power processor.
PCB design should preserve clean supply distribution, connect decoupling capacitors close to the supply pins, and route high-speed signals away from analog inputs and switching nodes. Firmware and peripheral configuration must match the selected pin assignments. Use the EFM32LG data sheet and device programming documentation to confirm package pin functions, programming connections, clock settings, and the applicable temperature-grade ordering code before production release.
This product page combines core memory, power, package, and processor specifications with drop-in family alternatives, application guidance, comparison criteria, and practical design considerations. It is intended to accelerate component selection while keeping PCB footprint, firmware support, and low-power design requirements in view.
Alternativas drop-in para EFM32LG942F64-QFP64 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
EFM32LG942F64G-E-QFP64
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
EFM32LG942F64G-F-QFP64
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
EFM32LG842F64-QFP64
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →EFM32LG862F64-QFP64
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
EFM32LG812F64-QFP64
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
EFM32LG942F64-QFP64 Classificações máximas e características elétricas
| Product Type | 32-bit ARM Cortex-M3 Microcontroller |
| Series | EFM32LG Leopard Gecko |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 64 KB |
| RAM | 32 KB |
| Supply Voltage Range | 1.98 V to 3.8 V |
| Stop Mode Current | 0.65 µA |
| Run Mode Current | 211 µA/MHz |
| Processor Architecture | ARM Cortex-M3, 32-bit |
| Encapsulamento | 64-TQFP (10 mm x 10 mm) |
| Contagem de pinos | 64 pins |
| Tipo de montagem | Surface Mount |
| Program Memory Type | Flash |
| Manufacturer | Silicon Labs |
Guia de Configuração de Pinos do EFM32LG942F64-QFP64 64-tqfp (10 mm x 10 mm)
Configuração de pinos para EFM32LG942F64-QFP64 (pacote 64-tqfp (10 mm x 10 mm)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para EFM32LG942F64-QFP64.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
EFM32LG942F64-QFP64 é adequado para 6 aplicaçãos: Battery-Powered Environmental Sensors, Industrial Monitoring and Control, Building Automation Endpoints, Compact Health and Wellness Devices, Low-Power Wireless Accessories, Portable Measurement and Test Equipment.
Battery-Powered Environmental Sensors
The EFM32LG942F64-QFP64 suits environmental sensor nodes that sample temperature, humidity, air quality, or motion while spending most of their operating time asleep. Its 48 MHz Arm Cortex-M3 core can perform local filtering and conversions without a separate processor, while 64 KB of Flash and 32 KB of RAM accommodate firmware and measurement buffers. The 0.65 µA Stop-mode current provides a strong foundation for duty-cycled operation. Use the sleep wake-up timer or an external interrupt to trigger measurements, and disable unused peripherals and GPIO blocks during idle periods to improve the final battery-life result.
Recomendado
Industrial Monitoring and Control
The EFM32LG942F64-QFP64 is appropriate for industrial monitoring modules that collect sensor data, operate relays, supervise machinery, or coordinate local control loops. Its 48 MHz 32-bit Cortex-M3 core supports responsive interrupt-driven control, while the integrated analog and digital peripherals can reduce the component count of a compact controller. The 64 KB Flash supports a bootloader plus application firmware, and 32 KB of RAM provides working space for protocol handling and data buffering. For factory equipment, isolate sensitive analog paths from digital switching nodes and verify industrial temperature, isolation, and regulatory requirements during qualification.
Recomendado
Building Automation Endpoints
The EFM32LG942F64-QFP64 fits building-control endpoints for occupancy, temperature, lighting, access, or equipment monitoring. Its low Stop-mode consumption allows the controller to remain available for periodic sensor updates and bus communication without continuously running the processor. The 1.98 V to 3.8 V operating range also supports integration with low-voltage power trees, subject to the exact regulator design. Use the device's communication peripherals for the selected building network, implement watchdog recovery for unattended operation, and define startup behavior so communications do not begin before the power tree and sensor bus are stable.
Recomendado
Compact Health and Wellness Devices
The EFM32LG942F64-QFP64 can serve as the control MCU in compact wellness products such as activity trackers, posture monitors, temperature patches, and portable measurement accessories. The 48 MHz core is sufficient for sensor fusion, local filtering, and user-interface state management, while the 32 KB RAM avoids requiring a separate memory component for modest working sets. The 0.65 µA Stop-mode specification supports long intervals between measurements. Designers must still account for sensor standby current, radio duty cycle, regulator efficiency, and the higher current of active acquisition and data transfer when estimating battery life.
Recomendado
Low-Power Wireless Accessories
The EFM32LG942F64-QFP64 is well suited to low-power wireless accessories in which an external radio communicates with a low-energy MCU for protocol handling, configuration, and local control. The microcontroller can wake for short data-processing intervals and return to Stop mode between radio transactions. Its 64 KB Flash and 32 KB RAM are sufficient for compact protocol stacks and device logic, although radio-buffer requirements must be checked. Place the radio and antenna section away from sensitive analog inputs, provide local decoupling at the radio supply, and confirm that the combined peak current of the radio and MCU does not exceed the selected regulator or battery capability.
Recomendado
Portable Measurement and Test Equipment
The EFM32LG942F64-QFP64 can support compact measurement instruments, data loggers, and portable test modules that combine acquisition, local computation, and a communications interface. Its 48 MHz Cortex-M3 core handles interrupt servicing, calibration logic, and protocol handling, while 64 KB of Flash and 32 KB of RAM fit embedded firmware and measurement records. The microcontroller's integrated analog resources can reduce board area when the required channels and accuracy match the application. For precision measurement, follow the recommended grounding and decoupling layout, calibrate at the intended temperature range, and use external components only when the internal converter cannot meet the required noise or accuracy target.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para EFM32LG942F64-QFP64 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | EFM32LG942F64G-E-QFP64 | EFM32LG942F64G-F-QFP64 | EFM32LG842F64-QFP64 | EFM32LG862F64-QFP64 | EFM32LG812F64-QFP64 |
|---|---|---|---|---|---|---|
| Package | 64-TQFP (10 mm x 10 mm) | 64-TQFP (10 mm x 10 mm) | 64-TQFP (10 mm x 10 mm) | 64-TQFP (10 mm x 10 mm) | 64-TQFP (10 mm x 10 mm) | 64-TQFP (10 mm x 10 mm) |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Processor Core | 32-bit ARM Cortex-M3 | 32-bit ARM Cortex-M3 | 32-bit ARM Cortex-M3 | 32-bit ARM Cortex-M3 | 32-bit ARM Cortex-M3 | 32-bit ARM Cortex-M3 |
| Maximum CPU Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB | 64 KB | 64 KB | 64 KB |
| RAM | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB |
Principais diferenciais
- Direct ordering alternatives preserve the complete memory and core configuration (vs EFM32LG942F64G-E-QFP64)
- Broader peripheral choice than lower-numbered Leopard Gecko configurations (vs EFM32LG812F64-QFP64)
- Low-power performance supports duty-cycled embedded systems (vs EFM32LG842F64-QFP64)
- Family-level alternatives retain the same package and memory architecture (vs EFM32LG862F64-QFP64)
Notas de projeto
Place the required supply bypass capacitors directly beside the EFM32LG942F64-QFP64 power pins, using the shortest possible traces and a low-inductance ground return. Keep the 64-pin TQFP perimeter accessible for programming and inspection, and route clock, debug, and communication signals away from analog inputs. Maintain the footprint dimensions and pin numbering specified in the manufacturer package drawing rather than relying on a generic QFP library symbol.
Design the 1.98 V to 3.8 V supply path around both average and peak loading. The EFM32LG can consume 211 µA/MHz in Run mode before adding peripheral and external-load current, so a regulator selected only for sleep-mode consumption may overload during acquisition or communications. Verify startup current, radio or sensor peaks, voltage tolerance, and the transient response at the MCU supply pins. Use the manufacturer power-management guidance to select and place the bulk and bypass capacitance.
Do not approve a substitute from the package outline alone. Verify the exact ordering-temperature code, flash and RAM density, GPIO count, analog channels, communication peripherals, package dimensions, and firmware device identifier. For EFM32LG family alternatives, compare every signal used by the PCB and recompile the application with the selected device support package. Test startup, low-power transitions, watchdog recovery, and all peripheral functions before releasing the substitution for production.
Separate analog inputs from clocks, high-speed digital nets, switching-converter nodes, and inductors. Use a continuous ground reference under the device where practical, return analog and digital currents locally, and avoid routing sensitive signals beneath noisy power circuitry. If the analog section depends on low noise, add filtering only after measuring the actual noise and impedance at the ADC input, because unnecessary RC networks can introduce settling-time and leakage errors.
Informações de conformidade
No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for EFM32LG942F64-QFP64. AEC-Q100 is not applicable to this general-purpose microcontroller.