Silicon Labs

EFM32LG942F64-QFP64 - 48MHz Cortex-M3 MCU | Silicon Labs

MPN: EFM32LG942F64-QFP64 ✓ Nakahanda
1.98 V to 3.8 V Vdss 0.65 µA Id 64-TQFP (10 mm x 10 mm) Package 48 MHz Speed 64 KB Memory
MOQ: 1 |

EFM32LG942F64-QFP64 Ulas

Silicon Labs EFM32LG942F64-QFP64 is a 32-bit Arm Cortex-M3 microcontroller operating up to 48 MHz, with 64 KB of Flash memory and 32 KB of RAM in a 64-pin TQFP package measuring 10 mm by 10 mm. Its 1.98 V to 3.8 V supply range supports low-voltage embedded systems.

A microcontroller is a programmable semiconductor that combines a processor core, memory, peripherals, and communication interfaces on one integrated circuit. The EFM32LG belongs to the Leopard Gecko family, a 32-bit MCU family positioned for low-power embedded control. Its hierarchy extends from the EFM32LG series to the Arm Cortex-M3 processor class, general-purpose microcontrollers, and embedded semiconductors.

The EFM32LG942F64-QFP64 emphasizes energy-efficient operation. Silicon Labs specifies consumption as low as 0.65 µA in Stop mode and 211 µA/MHz in Run mode. Autonomous peripherals can perform designated tasks while the processor sleeps, reducing the energy required for sensor acquisition, timing, communications, and control-loop operation. The 64 KB Flash configuration supports firmware storage, while 32 KB of RAM accommodates working data, stack space, and peripheral buffers.

Its 32-bit Arm Cortex-M3 core combines deterministic interrupt handling with an efficient instruction set and operates at up to 48 MHz. The device also integrates extensive analog and digital resources into the same package. This high level of integration can reduce external component count on compact sensor nodes, industrial control modules, and connected accessories while preserving a common peripheral architecture across the EFM32LG family.

Typical uses include battery-powered environmental sensors, building-control endpoints, industrial monitoring nodes, compact health-and-wellbeing products, and low-power wireless accessories. The Stop-mode current is particularly relevant to devices that spend most of their operating cycle asleep and wake periodically to measure or transmit information. The 48 MHz processing rate also provides enough performance for protocol handling, local filtering, and control without requiring a higher-power processor.

PCB design should preserve clean supply distribution, connect decoupling capacitors close to the supply pins, and route high-speed signals away from analog inputs and switching nodes. Firmware and peripheral configuration must match the selected pin assignments. Use the EFM32LG data sheet and device programming documentation to confirm package pin functions, programming connections, clock settings, and the applicable temperature-grade ordering code before production release.

This product page combines core memory, power, package, and processor specifications with drop-in family alternatives, application guidance, comparison criteria, and practical design considerations. It is intended to accelerate component selection while keeping PCB footprint, firmware support, and low-power design requirements in view.

Mga alternatibo na pwedeng ilagay na EFM32LG942F64-QFP64 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

EFM32LG942F64G-E-QFP64

✅ Drop-In
📦 64-TQFP (10 mm x 10 mm)
Alternative ordering designation for the same EFM32LG942F64G device; CPU, 64 KB Flash, 32 KB RAM, and package remain unchanged at 0% difference.

📋 Alternatibo na Reference (hindi sa katalogo)

EFM32LG942F64G-F-QFP64

✅ Drop-In
📦 64-TQFP (10 mm x 10 mm)
Alternative ordering designation for the same EFM32LG942F64G device; electrical ratings and memory sizes differ by 0%, subject to grade-code confirmation.

📋 Alternatibo na Reference (hindi sa katalogo)

EFM32LG842F64-QFP64

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
Silicon Labs
📦 64-TQFP (10 mm x 10 mm)
32-bit ARM Cortex-M3 microcontroller · Leopard Gecko · 48 MHz · 64 KB (64K x 8) · 32 KB · 1.98 V to 3.8 V · 8 x 18 segments · AES hardware accelerator

Magkontak para sa presyo

Tingnan ang Datasheet →

EFM32LG862F64-QFP64

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 64-TQFP (10 mm x 10 mm)
Matches 48 MHz core, 64 KB Flash, 32 KB RAM, and 64-pin footprint; the 862 peripheral configuration differs by approximately 10% from the 942.

📋 Alternatibo na Reference (hindi sa katalogo)

EFM32LG812F64-QFP64

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 64-TQFP (10 mm x 10 mm)
Matches 48 MHz core, 64 KB Flash, 32 KB RAM, and 64-pin footprint; reduced peripheral availability may approach 20% versus the 942.

📋 Alternatibo na Reference (hindi sa katalogo)

EFM32LG942F64-QFP64 Mga Pinakamataas na Rating at Electrical Characteristics

Product Type 32-bit ARM Cortex-M3 Microcontroller
Series EFM32LG Leopard Gecko
Maximum CPU Frequency 48 MHz
Flash Memory 64 KB
RAM 32 KB
Supply Voltage Range 1.98 V to 3.8 V
Stop Mode Current 0.65 µA
Run Mode Current 211 µA/MHz
Processor Architecture ARM Cortex-M3, 32-bit
Packhaging 64-TQFP (10 mm x 10 mm)
Bilang ng Pin 64 pins
Uri ng Pagpapasok Surface Mount
Program Memory Type Flash
Manufacturer Silicon Labs

Gabay sa Pin Configuration ng EFM32LG942F64-QFP64 64-tqfp (10 mm x 10 mm)

Pin configuration para sa EFM32LG942F64-QFP64 (64-tqfp (10 mm x 10 mm) package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng 64-tqfp (10 mm x 10 mm) package para sa EFM32LG942F64-QFP64

Wala ng detalyadong pinout data na magagamit para sa EFM32LG942F64-QFP64.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

EFM32LG942F64-QFP64 ay nararapat para sa 6 aplikasyons: Battery-Powered Environmental Sensors, Industrial Monitoring and Control, Building Automation Endpoints, Compact Health and Wellness Devices, Low-Power Wireless Accessories, Portable Measurement and Test Equipment.

🌐

Battery-Powered Environmental Sensors

The EFM32LG942F64-QFP64 suits environmental sensor nodes that sample temperature, humidity, air quality, or motion while spending most of their operating time asleep. Its 48 MHz Arm Cortex-M3 core can perform local filtering and conversions without a separate processor, while 64 KB of Flash and 32 KB of RAM accommodate firmware and measurement buffers. The 0.65 µA Stop-mode current provides a strong foundation for duty-cycled operation. Use the sleep wake-up timer or an external interrupt to trigger measurements, and disable unused peripherals and GPIO blocks during idle periods to improve the final battery-life result.

🏭

Industrial Monitoring and Control

The EFM32LG942F64-QFP64 is appropriate for industrial monitoring modules that collect sensor data, operate relays, supervise machinery, or coordinate local control loops. Its 48 MHz 32-bit Cortex-M3 core supports responsive interrupt-driven control, while the integrated analog and digital peripherals can reduce the component count of a compact controller. The 64 KB Flash supports a bootloader plus application firmware, and 32 KB of RAM provides working space for protocol handling and data buffering. For factory equipment, isolate sensitive analog paths from digital switching nodes and verify industrial temperature, isolation, and regulatory requirements during qualification.

🧩

Building Automation Endpoints

The EFM32LG942F64-QFP64 fits building-control endpoints for occupancy, temperature, lighting, access, or equipment monitoring. Its low Stop-mode consumption allows the controller to remain available for periodic sensor updates and bus communication without continuously running the processor. The 1.98 V to 3.8 V operating range also supports integration with low-voltage power trees, subject to the exact regulator design. Use the device's communication peripherals for the selected building network, implement watchdog recovery for unattended operation, and define startup behavior so communications do not begin before the power tree and sensor bus are stable.

💊

Compact Health and Wellness Devices

The EFM32LG942F64-QFP64 can serve as the control MCU in compact wellness products such as activity trackers, posture monitors, temperature patches, and portable measurement accessories. The 48 MHz core is sufficient for sensor fusion, local filtering, and user-interface state management, while the 32 KB RAM avoids requiring a separate memory component for modest working sets. The 0.65 µA Stop-mode specification supports long intervals between measurements. Designers must still account for sensor standby current, radio duty cycle, regulator efficiency, and the higher current of active acquisition and data transfer when estimating battery life.

📡

Low-Power Wireless Accessories

The EFM32LG942F64-QFP64 is well suited to low-power wireless accessories in which an external radio communicates with a low-energy MCU for protocol handling, configuration, and local control. The microcontroller can wake for short data-processing intervals and return to Stop mode between radio transactions. Its 64 KB Flash and 32 KB RAM are sufficient for compact protocol stacks and device logic, although radio-buffer requirements must be checked. Place the radio and antenna section away from sensitive analog inputs, provide local decoupling at the radio supply, and confirm that the combined peak current of the radio and MCU does not exceed the selected regulator or battery capability.

🖥️

Portable Measurement and Test Equipment

The EFM32LG942F64-QFP64 can support compact measurement instruments, data loggers, and portable test modules that combine acquisition, local computation, and a communications interface. Its 48 MHz Cortex-M3 core handles interrupt servicing, calibration logic, and protocol handling, while 64 KB of Flash and 32 KB of RAM fit embedded firmware and measurement records. The microcontroller's integrated analog resources can reduce board area when the required channels and accuracy match the application. For precision measurement, follow the recommended grounding and decoupling layout, calibrate at the intended temperature range, and use external components only when the internal converter cannot meet the required noise or accuracy target.

What are the key specifications of EFM32LG942F64-QFP64?
The EFM32LG942F64-QFP64 combines a 48 MHz 32-bit Arm Cortex-M3 core, 64 KB of Flash memory, and 32 KB of RAM in a 64-pin TQFP package. According to the Silicon Labs EFM32LG data sheet, its operating supply range is 1.98 V to 3.8 V. It can consume as little as 0.65 µA in Stop mode and 211 µA/MHz in Run mode, making it suitable for compact, low-power embedded control systems.
Where can I download the EFM32LG942F64-QFP64 datasheet PDF?
The official EFM32LG942F64-QFP64 datasheet PDF is available from Silicon Labs at https://www.silabs.com/documents/public/data-sheets/efm32lg-datasheet.pdf. The document covers the EFM32LG family, including processor characteristics, memory resources, electrical specifications, low-power behavior, peripherals, package information, and pin definitions. Use the device-specific tables and ordering information to confirm the exact functions associated with EFM32LG942F64-QFP64.
Where can I find the EFM32LG942F64-QFP64 pinout?
Use the package pin table in the official Silicon Labs EFM32LG data sheet to locate the EFM32LG942F64-QFP64 pinout and alternate-function assignments. The component uses a 64-pin TQFP package measuring 10 mm by 10 mm. Pin functions can vary by operating mode and peripheral configuration, so connect programming interfaces, clock components, analog inputs, and communication signals according to the exact pin-description table rather than relying on a generic 64-pin diagram.
How much power does the EFM32LG942F64-QFP64 consume?
The EFM32LG942F64-QFP64 consumes as little as 0.65 µA in Stop mode and 211 µA/MHz in Run mode, according to the Silicon Labs EFM32LG data sheet. Actual system consumption depends on clock frequency, active peripherals, flash activity, GPIO states, and the operating mode selected by firmware. The low Stop-mode figure is most useful for devices that wake periodically, while active-mode consumption should be calculated from the selected operating conditions.
Is the EFM32LG942F64-QFP64 suitable for battery-powered devices?
Yes, the EFM32LG942F64-QFP64 is suitable for many battery-powered devices because its Stop-mode current can be as low as 0.65 µA. The 48 MHz Cortex-M3 core also supports efficient local processing, while autonomous peripherals can reduce the need to keep the processor active. Battery life still depends on sensor load, radio activity, regulator efficiency, wake-up frequency, and the time the system remains in each operating mode.
What is the difference between EFM32LG942F64-QFP64 and EFM32LG942F64G-E-QFP64?
EFM32LG942F64G-E-QFP64 is an ordering designation for the same EFM32LG942F64G device family member represented by EFM32LG942F64-QFP64. Device-support documentation lists both designations as members of EFM32LG942F64G, while both use a 64-pin TQFP package with a 48 MHz Cortex-M3 core, 64 KB of Flash, and 32 KB of RAM. Confirm the ordering-temperature code and packaging option against the manufacturer documentation before substitution.
When should I choose EFM32LG942F64-QFP64 over EFM32LG842F64-QFP64?
Choose EFM32LG942F64-QFP64 when the design benefits from the broader peripheral complement associated with the 942 device within the Leopard Gecko family. Choose EFM32LG842F64-QFP64 only after verifying that every required peripheral, pin function, and electrical limit is present. Both families target low-power 32-bit Cortex-M3 applications and use comparable 64-pin TQFP configurations, so the decision should be driven by peripheral availability and validated device support rather than clock speed alone.
What is the best drop-in replacement for EFM32LG942F64-QFP64?
EFM32LG942F64G-E-QFP64 is the closest documented drop-in alternative because it is listed as another manufacturer part number designation within the EFM32LG942F64G device and retains the 64-pin TQFP package, 48 MHz Cortex-M3 core, 64 KB of Flash, and 32 KB of RAM. EFM32LG942F64G-F-QFP64 is another ordering variant. Final substitution still requires checking the temperature grade, package marking, firmware support, and production requirements.
Can EFM32LG842F64-QFP64 replace EFM32LG942F64-QFP64?
EFM32LG842F64-QFP64 can be considered a conditional family-level replacement because it matches the core frequency, 64 KB Flash configuration, 32 KB RAM, and 64-pin TQFP package. It should not be approved solely by package comparison: verify that required UART, SPI, I2C, USB, timer, ADC, GPIO, clock, and interrupt resources are available on the exact pins used by the existing PCB. Update and validate the firmware and device configuration for the selected part.
EFM32LG942F64-QFP64 vs EFM32LG862F64-QFP64: which is better for sensor nodes?
EFM32LG942F64-QFP64 is the safer choice when the sensor node depends on a broad set of peripherals or when avoiding software and board changes is important. EFM32LG862F64-QFP64 may be suitable when its available peripheral set fully covers the design and validation is completed. Both provide a 48 MHz 32-bit Cortex-M3 core, 64 KB Flash, 32 KB RAM, and a 64-pin TQFP package, so the key decision is verified peripheral and pin compatibility.
Where can I buy EFM32LG942F64-QFP64 online?
Use the Request a Quote form on this XAIPART product page to request current EFM32LG942F64-QFP64 availability, order quantities, lead time, and a quotation. The request should include your target quantity, required packaging form, date code expectations, and any temperature-grade requirements. This avoids relying on stale marketplace stock messages and gives the purchasing team a direct response for the exact 64-pin TQFP ordering code.
What is the price of EFM32LG942F64-QFP64?
Submit the EFM32LG942F64-QFP64 requirement through the Request a Quote form on this page for current commercial terms. Include the annual and prototype quantities, reel or tray preference, and required shipment destination. The quote process accounts for the exact MPN, market conditions, packaging, and order scale, providing a more useful response than a static unit figure that can change without notice.
What is the lead time for EFM32LG942F64-QFP64?
Request the current lead time for EFM32LG942F64-QFP64 through the Request a Quote form on this page. Include prototype, production, and forecasted annual quantities because lead time and minimum order quantity can depend on scale and packaging. Also state any required date-code or traceability limits so the supplier can confirm whether the EFM32LG942F64-QFP64 allocation satisfies the production plan.
Is EFM32LG942F64-QFP64 in stock?
Current EFM32LG942F64-QFP64 stock status should be confirmed through the Request a Quote form on this page. Provide the required quantity, packaging form, target date, and shipping destination for the most useful response. Because stock can change rapidly and allocated inventory may differ by reel code, avoid treating a general family listing as confirmation that the exact EFM32LG942F64-QFP64 ordering code is immediately available.
Is EFM32LG942F64-QFP64 the same as EFM32LG942F64G-E-QFP64?
EFM32LG942F64-QFP64 and EFM32LG942F64G-E-QFP64 identify orderable forms of the EFM32LG942F64G device, with the letter codes distinguishing the specific ordering and temperature-grade configuration. Device-support documentation lists EFM32LG942F64-QFP64 as one manufacturer part number contained by EFM32LG942F64G. Their footprint and core resources match, but procurement should still verify the exact grade, packaging code, and approved manufacturer ordering designation.

Impormasyon ng Talumpati sa Engineering for EFM32LG942F64-QFP64 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose EFM32LG942F64-QFP64 when the design needs the 48 MHz Cortex-M3 core, 64 KB of Flash, 32 KB of RAM, low-power operation, and the peripheral breadth associated with the 942 Leopard Gecko configuration. EFM32LG942F64G-E-QFP64 or EFM32LG942F64G-F-QFP64 are preferable when only the approved ordering or temperature-grade designation must change; both preserve the device identity and package. Consider EFM32LG842F64-QFP64, EFM32LG862F64-QFP64, or EFM32LG812F64-QFP64 only after a complete comparison of required peripherals, pins, firmware support, and qualification conditions. The 812 option offers the largest functional trade-off, while the 842 and 862 options are closer family alternatives. None should be treated as an automatic substitution: a successful drop-in design retains the 64-pin TQFP footprint, validates every used signal in hardware, and passes firmware, low-power, and production-test verification.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto EFM32LG942F64G-E-QFP64 EFM32LG942F64G-F-QFP64 EFM32LG842F64-QFP64 EFM32LG862F64-QFP64 EFM32LG812F64-QFP64
Package 64-TQFP (10 mm x 10 mm) 64-TQFP (10 mm x 10 mm) 64-TQFP (10 mm x 10 mm) 64-TQFP (10 mm x 10 mm) 64-TQFP (10 mm x 10 mm) 64-TQFP (10 mm x 10 mm)
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Processor Core 32-bit ARM Cortex-M3 32-bit ARM Cortex-M3 32-bit ARM Cortex-M3 32-bit ARM Cortex-M3 32-bit ARM Cortex-M3 32-bit ARM Cortex-M3
Maximum CPU Frequency 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz
Flash Memory 64 KB 64 KB 64 KB 64 KB 64 KB 64 KB
RAM 32 KB 32 KB 32 KB 32 KB 32 KB 32 KB

Pangunahing mga Pagkakaiba

  • Direct ordering alternatives preserve the complete memory and core configuration (kumpara saEFM32LG942F64G-E-QFP64)
  • Broader peripheral choice than lower-numbered Leopard Gecko configurations (kumpara saEFM32LG812F64-QFP64)
  • Low-power performance supports duty-cycled embedded systems (kumpara saEFM32LG842F64-QFP64)
  • Family-level alternatives retain the same package and memory architecture (kumpara saEFM32LG862F64-QFP64)

Talaan ng Disenyo

Place the required supply bypass capacitors directly beside the EFM32LG942F64-QFP64 power pins, using the shortest possible traces and a low-inductance ground return. Keep the 64-pin TQFP perimeter accessible for programming and inspection, and route clock, debug, and communication signals away from analog inputs. Maintain the footprint dimensions and pin numbering specified in the manufacturer package drawing rather than relying on a generic QFP library symbol.

Design the 1.98 V to 3.8 V supply path around both average and peak loading. The EFM32LG can consume 211 µA/MHz in Run mode before adding peripheral and external-load current, so a regulator selected only for sleep-mode consumption may overload during acquisition or communications. Verify startup current, radio or sensor peaks, voltage tolerance, and the transient response at the MCU supply pins. Use the manufacturer power-management guidance to select and place the bulk and bypass capacitance.

Do not approve a substitute from the package outline alone. Verify the exact ordering-temperature code, flash and RAM density, GPIO count, analog channels, communication peripherals, package dimensions, and firmware device identifier. For EFM32LG family alternatives, compare every signal used by the PCB and recompile the application with the selected device support package. Test startup, low-power transitions, watchdog recovery, and all peripheral functions before releasing the substitution for production.

Separate analog inputs from clocks, high-speed digital nets, switching-converter nodes, and inductors. Use a continuous ground reference under the device where practical, return analog and digital currents locally, and avoid routing sensitive signals beneath noisy power circuitry. If the analog section depends on low noise, add filtering only after measuring the actual noise and impedance at the ADC input, because unnecessary RC networks can introduce settling-time and leakage errors.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for EFM32LG942F64-QFP64. AEC-Q100 is not applicable to this general-purpose microcontroller.

Data napatotohanan sa: 2026-11-10 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

EFM32LG942F64-QFP64 EFM32LG942F64-QFP64 datasheet EFM32LG942F64-QFP64 datasheet pdf EFM32LG942F64-QFP64 pinout EFM32LG942F64-QFP64 specifications EFM32LG942F64-QFP64 equivalent EFM32LG942F64-QFP64 replacement EFM32LG942F64-QFP64 price Silicon Labs EFM32LG942F64-QFP64 EFM32LG942F64 64 TQFP pinout EFM32LG942F64-QFP64 vs EFM32LG812F64-QFP64 EFM32LG942F64-QFP64 low power application

Mga kaugnay na Mga Komponente at mga Tuntunin

Silicon Labs EFM32LG942F64-QFP64 EFM32LG942F64G-E-QFP64 EFM32LG942F64G-F-QFP64 EFM32LG842F64-QFP64 EFM32LG862F64-QFP64 EFM32LG812F64-QFP64 EFM32LG Leopard Gecko ARM Cortex-M3 32-bit microcontroller embedded microcontroller microcontroller semiconductor low-dropout regulator Flash memory static RAM TQFP-64 QFP package family surface-mount package Stop mode Run mode sleep current autonomous peripherals industrial sensor node
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ