EFM32TG222F32-QFP48T - 32MHz Cortex-M3 MCU | Silicon Labs
N.º da peça: EFM32TG222F32-QFP48T ✓ AtivoEFM32TG222F32-QFP48T Visão geral
An MCU is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The EFM32TG series is positioned within the hierarchy of embedded microcontroller ICs, combining a 32-bit ARM Cortex-M3 core with energy-saving modes for battery-operated and connected products. Its autonomous peripherals can continue specified measurements or control functions while the processor sleeps, reducing the energy required for periodic sensing and monitoring.
Three headline capabilities define the EFM32TG222F32-QFP48T. Its 32 MHz Cortex-M3 core supports responsive embedded control, while 32 kB of Flash accommodates firmware and 4 kB of RAM supports working data. The device also integrates three operational amplifiers, AES security capability, and two 16-bit timers according to the manufacturer and distributor product information. These resources support compact sensing, control, and security-oriented designs without requiring several discrete components.
The EFM32TG platform is designed around low-energy operation. The EFM32TG family datasheet states that devices can consume as little as 0.6 µA in Stop mode and 150 µA/MHz in Run mode. Fast wake-up behavior is valuable in intermittent-duty systems because the processor need not remain active between external events. Autonomous peripheral operation further allows the MCU to handle routine background functions with reduced processor activity.
Typical applications include battery-powered environmental sensors, industrial condition-monitoring nodes, compact energy meters, building and access-control equipment, and low-power connected peripherals. The combination of 37 digital I/O pins, 32 kB Flash, 4 kB RAM, and integrated op-amps is particularly useful in designs that need local analog conditioning and multiple digital interfaces without requiring a high-pin-count package.
A critical design consideration is power-budget allocation across active, sleep, and Stop operating states. Choose external decoupling and analog components according to the manufacturer reference circuit, preserve the intended pin multiplexing, and verify that the low-power peripherals support the required measurement sequence. Firmware should also use the low-energy features deliberately rather than treating Stop mode as a simple substitute for good peripheral partitioning.
This product page combines manufacturer specifications, practical low-power design guidance, package information, application analysis, and a structured comparison of relevant EFM32 options. It is intended to help engineers evaluate the EFM32TG222F32-QFP48T for embedded control, sensing, and energy-conscious designs without relying only on a basic distributor parameter table.
Alternativas drop-in para EFM32TG222F32-QFP48T — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com EFM32TG222F32-QFP48T (mesmo formato e footprint) — diferindo em Package, Flash Memory, Timer Count, Operational Amplifiers, Stop Mode Current.
EFM32TG222F32-D-QFP48
✅ Drop-InConsulte o preço
Ver ficha técnica →EFM32TG221F32-QFP48T
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
EFM32ZG222F32-QFP48T
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
EFM32TG822F32-QFP48T
✅ Drop-InConsulte o preço
Ver ficha técnica →EFM32HG321F32G-A-QFP48R
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
EFM32TG222F32-QFP48T Classificações máximas e características elétricas
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 32 kB |
| RAM | 4 kB |
| Digital I/O Pins | 37 pins |
| Timer Count | 2 timers |
| Timer Resolution | 16-bit |
| Integrated Operational Amplifiers | 3 amplifiers |
| Security Capability | AES hardware encryption |
| Supply Voltage Range | 1.98 V to 3.8 V |
| Stop-Mode Current | 0.6 µA typical at family level |
| Run-Mode Current | 150 µA/MHz at family level |
| Processor Architecture | ARM Cortex-M3, 32-bit |
| Encapsulamento | 48-pin TQFP, 7 mm × 7 mm |
| Tipo de montagem | Surface mount |
Guia de Configuração de Pinos do EFM32TG222F32-QFP48T 48-pin tqfp, 7 mm × 7 mm
Configuração de pinos para EFM32TG222F32-QFP48T (pacote 48-pin tqfp, 7 mm × 7 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para EFM32TG222F32-QFP48T.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
EFM32TG222F32-QFP48T é adequado para 6 aplicaçãos: Battery-Powered Environmental Sensors, Industrial Condition Monitoring, Smart Energy and Utility Meters, Building and Access Control, Portable Medical and Wearable Devices, Compact Connected IoT Nodes.
Battery-Powered Environmental Sensors
The EFM32TG222F32-QFP48T fits environmental sensor nodes that periodically measure temperature, humidity, gas, or air quality and then return to a low-power state. Its 32 MHz Cortex-M3 core can execute filtering and compensation algorithms, while 4 kB RAM provides working space for recent measurements. The family specification of 0.6 µA in Stop mode and fast wake-up supports duty-cycled operation. Three integrated op-amps may condition low-level sensor outputs, reducing external analog components when their input, output, and noise limits suit the application.
Recomendado
Industrial Condition Monitoring
The EFM32TG222F32-QFP48T is suitable for industrial equipment that monitors vibration, temperature, current, or machine state without requiring a high-performance processor continuously. Two 16-bit timers support periodic sampling and time-base functions, while the 37 digital I/O pins accommodate switches, alarm outputs, and digital sensors. Its 1.98 V to 3.8 V supply range supports low-voltage industrial designs. Firmware should partition continuous sampling from low-duty monitoring work and use the device's autonomous peripheral capabilities to reduce unnecessary processor wake-ups.
Recomendado
Smart Energy and Utility Meters
The EFM32TG222F32-QFP48T can serve as the control processor in compact energy-metering equipment where pulse counting, timed measurement, local display, and communications coexist on a 48-pin footprint. The two 16-bit timers are relevant to frequency and pulse measurements, while three op-amps can support current or voltage-sensing front ends within their electrical limits. The low-power architecture helps reduce average consumption in meters that spend most of their time idle. Validate accuracy paths, analog calibration, and communication timing in the final system configuration.
Recomendado
Building and Access Control
The EFM32TG222F32-QFP48T fits building-control and access peripherals that combine local inputs, actuator outputs, event logging, and authenticated communication. Its 37 digital I/O pins provide substantial interface capacity for door contacts, key readers, status indicators, and lock-control signals, while AES hardware capability supports security-sensitive data handling. The 32 kB Flash stores application firmware and configuration, and 4 kB RAM supports short-lived protocol and state buffers. For battery-backed access devices, use the low-power modes carefully to balance event responsiveness against standby consumption.
Recomendado
Portable Medical and Wearable Devices
The EFM32TG222F32-QFP48T can support compact wearable and portable health-device electronics that gather physiological or motion-related signals while maintaining a low average power budget. Its integrated three-op-amp array can reduce analog integration effort in low-level signal-conditioning designs, although safety-critical measurements require careful validation. AES hardware support is useful for protecting data handled by the device. The 32 kB Flash and 4 kB RAM are appropriate for focused acquisition and control firmware, not large datasets or complex graphical workloads.
Recomendado
Compact Connected IoT Nodes
The EFM32TG222F32-QFP48T is suitable for compact IoT nodes that gather local sensor data, apply simple processing, and transmit short status or event packets through an external radio. Its 32 MHz Cortex-M3 core provides more compute headroom than simpler 8-bit controllers, while the EFM32TG energy-saving modes help limit active radio intervals. Seventeen or more exposed digital I/O positions remain available after dedicated functions, subject to the selected pin multiplexing. The firmware should wake only the peripherals needed for acquisition, process data locally, and return the core to sleep between transmissions.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para EFM32TG222F32-QFP48T — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | EFM32TG222F32-D-QFP48 | EFM32TG221F32-QFP48T | EFM32ZG222F32-QFP48T | EFM32TG822F32-QFP48T | EFM32HG321F32G-A-QFP48R |
|---|---|---|---|---|---|---|
| Package | TQFP-48 (7 mm × 7 mm) | TQFP-48 (7 mm × 7 mm) | TQFP-48 (7 mm × 7 mm) | TQFP-48 (7 mm × 7 mm) | TQFP-48 (7 mm × 7 mm) | TQFP-48 (7 mm × 7 mm) |
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Flash Memory | 32 kB | 32 kB | 32 kB | 32 kB | 8 kB | 32 kB |
Principais diferenciais
- Higher maximum CPU frequency than the Zero Gecko alternative (vs EFM32ZG222F32-QFP48T)
- Four times the Flash memory of the TG822 alternative (vs EFM32TG822F32-QFP48T)
- Closest same-family ordering configuration (vs EFM32TG222F32-D-QFP48)
Notas de projeto
Build the power budget from active, idle, sleep, and Stop currents rather than using the 0.6 µA Stop-mode figure as the only design target. The EFM32TG family is specified at 150 µA/MHz in Run mode, so CPU-heavy routines can dominate battery life. Keep the processor inactive while autonomous peripherals perform suitable background work, and use the manufacturer power-management guidance when selecting clock, regulator, and GPIO states.
Place the required supply and bypass capacitors close to their associated power pins, with the shortest practical return path to ground. Preserve the reference-layout geometry for the 48-pin TQFP and route sensitive analog inputs away from switching nodes and high-current return paths. Because the MCU integrates three operational amplifiers, analog input routing and ground-reference design can be as important as the digital layout when the internal amplifiers are used for sensing.
Do not treat package equivalence as proof that firmware can be transferred without review. The Cortex-M3 and Cortex-M0+ alternatives differ in maximum frequency and peripheral behavior, while lower-memory variants may not contain all functions referenced by existing firmware. Before substitution, compare startup code, interrupt vectors, peripheral registers, pin multiplexing, clock settings, flash layout, and development-tool support for every board revision.
Assign unused GPIO inputs to defined states and verify that every external signal respects the selected I/O voltage domain. The listed 1.98 V to 3.8 V supply range does not automatically make every peripheral input tolerant of a wider voltage range. Check the manufacturer electrical limits, use series damping where exposed cables or slow-changing signals enter the board, and confirm wake-up behavior for signals intended to activate the MCU from a low-power state.
Informações de conformidade
The manufacturer product page and EFM32TG family datasheet should be checked for current material and environmental compliance declarations for the exact ordering code.