Silicon Labs

EFM32TG222F32-D-QFP48 - 32MHz Cortex-M3 MCU | Silicon Labs

N.º da peça: EFM32TG222F32-D-QFP48 ✓ Ativo
1.98 V to 3.8 V Vdss 48-pin TQFP, 7 mm × 7 mm Package 32 MHz Speed 32 kB Memory
MOQ: 1 |

EFM32TG222F32-D-QFP48 Visão geral

The Silicon Labs EFM32TG222F32-D-QFP48 is an ARM Cortex-M3 microcontroller rated up to 32 MHz, with 32 kB of Flash memory, 4 kB of RAM, and 37 digital I/O pins in a 48-pin TQFP package. It operates from 1.98 V to 3.8 V and combines a 32-bit RISC core with energy-saving modes and fast wake-up behavior for compact, low-power embedded systems.

A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals into one device. The EFM32TG222 belongs to the Tiny Gecko family within the EFM32 product portfolio. Its combination of 32 MHz processing performance, 4 kB SRAM, and extensive configurable peripherals makes it suitable for applications that need responsive control, efficient serial communication, and compact implementation in a 7 mm × 7 mm surface-mount package.

Key features include 32 kB Flash, 4 kB RAM, 37 digital I/O pins, two 16-bit timers, AES hardware, and three operational amplifiers. The supply-voltage range of 1.98 V to 3.8 V supports common low-voltage system rails. Fast wake-up and energy-saving modes are important for devices that spend substantial time asleep and need short active intervals for sensor acquisition, control updates, or communications.

The ARM Cortex-M3 architecture provides a 32-bit processing environment while retaining a straightforward embedded instruction set. Two 16-bit timers support periodic timing, pulse measurement, and motor or general-purpose control tasks. Configurable I/O allows pins to be assigned according to board-level routing, while the operational amplifiers can reduce external analog component count in suitable low-level signal-conditioning designs.

Typical uses include industrial sensor nodes, compact energy meters, building controls, portable accessories, battery-powered instrumentation, and connected IoT equipment. In these systems, the microcontroller can acquire sensor data, execute control logic, drive indicators, and communicate through configured serial peripherals. Its 48-pin TQFP footprint also provides more I/O than smaller QFN packages commonly used for cost-constrained designs.

Designers should preserve the manufacturer-recommended decoupling and programming interfaces, and they should review the complete pin-description table before assigning signals. The exposed 1.98 V to 3.8 V operating range requires compatible power regulation, while careful clock and sleep-mode planning is essential for achieving low average energy consumption in battery-operated products.

Alternativas drop-in para EFM32TG222F32-D-QFP48 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com EFM32TG222F32-D-QFP48 (mesmo formato e footprint) — diferindo em Flash Memory, Package, Product Type, Series, Architecture.

Silicon Labs
Flash Memory: 16 kB
Package: 48-TQFP, 7 mm x 7 mm
Product Type: ARM Cortex-M3 32-bit microcontroller
Comparar com EFM32TG222F32-D-QFP48 →
Silicon Labs
Package: 48-pin TQFP (7 x 7 mm)
Comparar com EFM32TG222F32-D-QFP48 →
Silicon Labs
Flash Memory: 8 KB (8K x 8)
Package: 48-pin TQFP (7 x 7 mm)
Comparar com EFM32TG222F32-D-QFP48 →
Silicon Labs
Flash Memory: 8 kB
Package: 48-TQFP (7 x 7 mm)
Product Type: ARM Cortex-M3 microcontroller
Comparar com EFM32TG222F32-D-QFP48 →
Silicon Labs
Package: 48-TQFP (7 x 7 mm)
Product Type: 32-bit ARM Cortex-M0+ microcontroller
Series: EFM32 Zero Gecko
Comparar com EFM32TG222F32-D-QFP48 →

EFM32TG222F32-QFP48

✅ Drop-In
Silicon Labs
📦 48-pin TQFP (7 mm × 7 mm)
32-bit ARM Cortex-M3 microcontroller · 32 MHz · ARM Cortex-M3, 32-bit · 32 kB · 4 kB · 37 pins · 2 timers · 16-bit

Consulte o preço

Ver ficha técnica →

EFM32ZG222F32-QFP48

✅ Drop-In
Silicon Labs
📦 48-pin TQFP (7 mm × 7 mm)
32-bit ARM Cortex-M0+ microcontroller · EFM32 Zero Gecko · 24 MHz · 32 kB · 4 kB · 37 · 2 x 16-bit timers · 1.98 V to 3.8 V

Consulte o preço

Ver ficha técnica →

EFM32HG222F32G-A-QFP48

✅ Drop-In
📦 48-pin TQFP (7 mm × 7 mm)
Retains 32 kB Flash and a 48-pin QFP footprint but belongs to a different MCU family with different core, peripheral, and clock characteristics

📋 Alternativa de referência (fora do catálogo)

EFM32HG321F32G-A-QFP48R

✅ Drop-In
📦 48-pin TQFP (7 mm × 7 mm)
Retains 32 kB Flash and a 48-pin TQFP footprint but uses a different HG family configuration; the R suffix indicates a distinct ordering form

📋 Alternativa de referência (fora do catálogo)

EFM32TG822F8-QFP48

✅ Drop-In
Silicon Labs
📦 48-pin TQFP (7 mm × 7 mm)
ARM Cortex-M3 · 32 MHz · 32-bit RISC · 8 kB · 2 kB · 37 pins · 2 x 16-bit timers · 1.85 V to 3.8 V

Consulte o preço

Ver ficha técnica →

EFM32TG222F32-D-QFP48 Classificações máximas e características elétricas

Product Type 32-bit ARM Cortex-M3 microcontroller
Series EFM32 Tiny Gecko
Maximum CPU Frequency 32 MHz
Flash Memory 32 kB
RAM 4 kB
Digital I/O Pins 37 pins
Timers 2 × 16-bit timers
Tensão de alimentação de operação 1.98 V to 3.8 V
CPU Architecture ARM Cortex-M3, 32-bit RISC
Security Feature AES hardware
Operational Amplifiers 3 integrated operational amplifiers
Encapsulamento 48-pin TQFP, 7 mm × 7 mm
Tipo de montagem Surface mount
Program Memory Type Flash
Low-Power Features Energy-saving modes and fast wake-up

Guia de Configuração de Pinos do EFM32TG222F32-D-QFP48 48-pin tqfp, 7 mm × 7 mm

Configuração de pinos para EFM32TG222F32-D-QFP48 (pacote 48-pin tqfp, 7 mm × 7 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 48-pin tqfp, 7 mm × 7 mm para EFM32TG222F32-D-QFP48

Nenhum dado detalhado de pinagem disponível para EFM32TG222F32-D-QFP48.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

EFM32TG222F32-D-QFP48 é adequado para 6 aplicaçãos: Battery-Powered Sensor Nodes, Industrial Condition Monitoring, Smart Energy Metering, Building Control Equipment, Portable Medical Accessories, Connected IoT Gateways.

🧩

Battery-Powered Sensor Nodes

The EFM32TG222F32-D-QFP48 fits compact sensor nodes that periodically wake, acquire measurements, evaluate control logic, and return to sleep. Its energy-saving modes and fast wake-up behavior reduce the inactive interval between events, while the 32 MHz Cortex-M3 core allows control work to be completed without raising the clock continuously. The 32 kB Flash accommodates firmware and fixed data, and 4 kB RAM supports transient sensor processing, although designs requiring large sample buffers should account for the 4 kB limit. The 1.98 V to 3.8 V supply range also supports low-voltage battery-derived rails when the regulator and cell chemistry are selected appropriately.

🏭

Industrial Condition Monitoring

The EFM32TG222F32-D-QFP48 can serve as the control and communications MCU in industrial condition-monitoring equipment that measures vibration, temperature, current, or equipment state. Two 16-bit timers provide timing resources for periodic sampling and event detection, while 37 digital I/O pins leave substantial control and interface capacity. Its 32 MHz processing rate supports responsive signal evaluation, and the 48-pin TQFP package offers ample routing space for debug, communications, and discrete I/O. The 1.98 V to 3.8 V operating range permits integration with industrial low-voltage rails, provided the system protects the device from transients outside the specified limits.

⚡

Smart Energy Metering

The EFM32TG222F32-D-QFP48 is appropriate for compact energy-metering controllers that must combine periodic measurement, local calculations, status indication, and communications. Its 32 kB Flash provides space for metering firmware, 4 kB RAM supports working state, and the 37 I/O pins can be assigned to sensor inputs, display control, communications, and configuration controls. AES hardware can assist with secure data handling when the complete firmware architecture defines appropriate keys and protocols. Because the RAM is limited to 4 kB, designs should stream or aggregate samples carefully rather than retain long uncompressed histories.

🏠

Building Control Equipment

The EFM32TG222F32-D-QFP48 fits building-control modules that coordinate digital inputs, outputs, and low-speed communications while managing energy use. Its energy-saving modes support systems that remain connected to building power but avoid continuous high-rate processing, and fast wake-up behavior improves response after a scheduled or event-driven wake. The 48-pin TQFP package provides more I/O than compact QFN devices, which is useful for multiple relay-control inputs, status LEDs, bus connections, and service interfaces. The three integrated operational amplifiers may simplify suitable low-level sensing stages, although external buffering or protection should be added where signal amplitude or noise conditions require it.

💊

Portable Medical Accessories

The EFM32TG222F32-D-QFP48 can be used in low-power portable medical accessories that perform local control, user-interface management, and limited data processing. Its low-power architecture is valuable in battery-powered products, while 37 digital I/O pins provide flexibility for buttons, indicators, sensors, and external interface control. The integrated three operational amplifiers can support suitable low-level analog stages without requiring a separate amplifier in every design. Medical applications still require application-specific review of electrical safety, isolation, accuracy, firmware validation, and regulatory obligations; the MCU specification alone does not establish medical certification or compliance.

🌐

Connected IoT Gateways

The EFM32TG222F32-D-QFP48 is suitable for compact IoT edge nodes that aggregate local sensor information and manage power-efficient communications. The 32 MHz Cortex-M3 core handles protocol tasks and application logic, while 32 kB Flash and 4 kB RAM support embedded firmware that does not require a large operating system. Its 37 digital I/O pins allow connection of sensors, indicators, and status inputs around a network interface. The low-power modes and fast wake-up behavior help support duty-cycled operation, but protocol buffering must be sized around the 4 kB RAM limit. An Ethernet companion can provide connectivity where the gateway architecture requires it.

Where can I buy the EFM32TG222F32-D-QFP48?
The EFM32TG222F32-D-QFP48 can be requested through the Request a Quote form on this page. The form is the appropriate route for checking current unit availability, order quantities, lead time, and shipment requirements for the exact 48-pin TQFP ordering code. Engineers should include the complete EFM32TG222F32-D-QFP48 MPN when submitting the request to avoid ambiguity with other EFM32 memory or package variants.
What is the price of the EFM32TG222F32-D-QFP48?
Current pricing for the EFM32TG222F32-D-QFP48 is handled through the Request a Quote form on this page. The exact MPN identifies a 32 MHz Cortex-M3 microcontroller with 32 kB Flash, 4 kB RAM, and a 48-pin TQFP package. Submit the requested quantity and target delivery location so the quotation can reflect the appropriate order configuration and current supply position.
What is the lead time for the EFM32TG222F32-D-QFP48?
Use the Request a Quote form on this page to request the current lead time for the EFM32TG222F32-D-QFP48. Lead time can depend on the ordered quantity, packaging, and current production availability. The device specification is a 32 MHz ARM Cortex-M3 MCU with 32 kB Flash and 4 kB RAM in a 48-pin TQFP package, so the requested part should be identified by the full ordering code.
Is the EFM32TG222F32-D-QFP48 in stock?
Current stock status for the EFM32TG222F32-D-QFP48 should be confirmed through the Request a Quote form on this page. The form allows procurement teams to request availability for the exact 48-pin TQFP configuration without confusing it with related EFM32TG222 variants that may use different packing codes. It is also the appropriate route for obtaining a quantity-based quotation and delivery estimate.
What are the key specifications of the EFM32TG222F32-D-QFP48?
The EFM32TG222F32-D-QFP48 is a 32 MHz ARM Cortex-M3 microcontroller with 32 kB Flash, 4 kB RAM, 37 digital I/O pins, two 16-bit timers, AES hardware, and three operational amplifiers. According to the Silicon Labs manufacturer datasheet, it operates from 1.98 V to 3.8 V and is packaged in a 48-pin, 7 mm × 7 mm TQFP. These parameters place it between compact low-pin-count MCUs and larger microcontrollers requiring more I/O.
What is the operating voltage of the EFM32TG222F32-D-QFP48?
The EFM32TG222F32-D-QFP48 operates from 1.98 V to 3.8 V. The Silicon Labs manufacturer datasheet identifies this range for the device, allowing it to operate from compatible low-voltage rails commonly used by embedded systems. The supply design must remain inside the stated limits during startup, active processing, and low-energy sleep operation.
EFM32TG222F32-D-QFP48 vs EFM32ZG222F32-QFP48 — which is better?
The EFM32TG222F32-D-QFP48 is preferable when 32 MHz Cortex-M3 performance is important, while the EFM32ZG222F32-QFP48 is a lower-frequency alternative. According to the Silicon Labs product information, the TG222 reaches 32 MHz and uses ARM Cortex-M3, whereas the ZG222 reaches 24 MHz and uses ARM Cortex-M0+. Both have 32 kB Flash, 4 kB RAM, 37 digital I/O pins, and a 48-pin TQFP format.
What is the difference between the EFM32TG222F32-D-QFP48 and EFM32ZG222F32-QFP48?
The principal differences are CPU core and maximum clock speed: the EFM32TG222F32-D-QFP48 uses ARM Cortex-M3 at up to 32 MHz, while the EFM32ZG222F32-QFP48 uses ARM Cortex-M0+ at up to 24 MHz. Their listed memory capacities are both 32 kB Flash and 4 kB RAM, and both provide 37 digital I/O pins in a 48-pin TQFP package. Peripheral availability and software compatibility must still be checked before interchange.
When should I choose the EFM32TG222F32-D-QFP48 over the EFM32ZG222F32-QFP48?
Choose the EFM32TG222F32-D-QFP48 when the application benefits from the Cortex-M3 core's higher 32 MHz performance or requires peripherals available in the Tiny Gecko family. The EFM32ZG222F32-QFP48 is a 24 MHz Cortex-M0+ option with the same stated 32 kB Flash and 4 kB RAM capacity. The final choice should also consider firmware dependencies, peripheral differences, power behavior, and qualification requirements.
Is the EFM32TG222F32-D-QFP48 suitable for low-power IoT devices?
Yes, the EFM32TG222F32-D-QFP48 is suitable for low-power IoT and sensor-node designs. Silicon Labs describes the device as energy sensitive, with energy-saving modes and fast wake-up behavior alongside its 32 MHz Cortex-M3 core. Its 4 kB RAM may constrain larger buffering tasks, but it is well matched to compact control nodes that periodically acquire data, process limited logic, and resume sleep operation quickly.
What is the best drop-in replacement for the EFM32TG222F32-D-QFP48?
The closest documented drop-in candidate is the EFM32TG222F32-QFP48 because it retains the 32 MHz Cortex-M3 core, 32 kB Flash, 4 kB RAM, 37 digital I/O pins, and 48-pin TQFP package. The principal distinction is the ordering or packing suffix. Engineers should confirm the manufacturer's pin, programming, and marking requirements before substituting any alternative, especially where firmware or qualification is involved.
Can the EFM32HG222F32G-A-QFP48 replace the EFM32TG222F32-D-QFP48?
The EFM32HG222F32G-A-QFP48 is a same-package, same-memory candidate for evaluation because it is listed as a 32 kB Flash, 48-pin QFP MCU, but it is not automatically a functional replacement. The EFM32TG222F32-D-QFP48 uses an ARM Cortex-M3 core at up to 32 MHz, while the HG family has different peripherals and features. Validate pin functions, clock requirements, memory behavior, firmware support, and application qualification before replacement.
Where can I download the EFM32TG222F32-D-QFP48 datasheet PDF?
The EFM32TG222F32-D-QFP48 datasheet is available through the Silicon Labs device page linked in the datasheet field on this page. It documents the electrical limits, memory map, peripherals, package information, and recommended operating conditions. Use the manufacturer document for final design decisions, particularly pin assignments, decoupling, clock setup, and programming requirements.
Where can I find the EFM32TG222F32-D-QFP48 pinout?
Use the pin-description table in the Silicon Labs manufacturer datasheet to assign every signal on the 48-pin TQFP package. The device provides 37 digital I/O pins, but its power, ground, reset, debug, and analog pins occupy additional package positions. Review the complete table before routing the PCB because peripheral functions can be multiplexed onto I/O pins and their availability can depend on configuration.
Does the EFM32TG222F32-D-QFP48 support AES and analog signal conditioning?
Yes, the EFM32TG222F32-D-QFP48 includes AES hardware and three operational amplifiers. According to the Silicon Labs product information, these resources can reduce the need for separate security and analog-support components in suitable designs. The three amplifiers remain shared MCU resources, so their input range, output capability, routing options, and concurrent peripheral use must be checked in the datasheet.

Dados de referência de engenharia para EFM32TG222F32-D-QFP48 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the EFM32TG222F32-D-QFP48 when a design needs a 32 MHz ARM Cortex-M3 core, 32 kB Flash, 4 kB RAM, 37 digital I/O pins, AES hardware, and three integrated operational amplifiers in a 48-pin TQFP package. It is particularly suitable for compact low-power controllers, industrial monitoring modules, and connected equipment. Select the EFM32ZG222F32-QFP48 when its 24 MHz Cortex-M0+ performance is sufficient and lower core complexity is preferred. Consider the HG-family candidates only after checking their different peripheral sets and firmware requirements. Avoid the EFM32TG822F8-QFP48 when the current 32 kB Flash budget is needed, because its 8 kB Flash is 75% smaller. For every alternative, verify pin multiplexing, startup behavior, peripheral availability, supply timing, and qualification before approving a physical substitution.

Comparação com alternativas

Parâmetro Este produto EFM32TG222F32-QFP48 EFM32ZG222F32-QFP48 EFM32HG222F32G-A-QFP48 EFM32HG321F32G-A-QFP48R EFM32TG822F8-QFP48
Package 48-pin TQFP (7 mm × 7 mm) 48-pin TQFP (7 mm × 7 mm) 48-pin TQFP (7 mm × 7 mm) 48-pin TQFP (7 mm × 7 mm) 48-pin TQFP (7 mm × 7 mm) 48-pin TQFP (7 mm × 7 mm)
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Flash Memory 32 kB 32 kB 32 kB 32 kB 32 kB 8 kB

Principais diferenciais

  • Higher maximum clock speed than the Zero Gecko alternative (vs EFM32ZG222F32-QFP48)
  • Four times the Flash capacity of the reduced-memory Tiny Gecko option (vs EFM32TG822F8-QFP48)
  • AES hardware and three integrated operational amplifiers in one MCU (vs EFM32HG222F32G-A-QFP48)
  • Closeest same-core, same-memory, same-package alternative (vs EFM32TG222F32-QFP48)

Notas de projeto

Design the supply for the specified 1.98 V to 3.8 V operating range, including startup and transient margins. Place the manufacturer's recommended decoupling capacitors close to the supply and ground pins, and keep high-current return paths away from sensitive analog inputs. The integrated operational amplifiers can reduce external analog component count, but their supply, common-mode range, output swing, and stability requirements must be checked before using them in a signal path.

Use the complete 48-pin pin-description table when assigning signals because multiplexed functions and alternate debug interfaces can restrict otherwise available I/O. Route sensitive analog inputs away from switching nodes and digital clock traces, provide a quiet ground reference for analog circuitry, and follow the manufacturer's recommended footprint dimensions. Check programming and debug access before finalizing the PCB so connector placement does not interfere with the MCU or surrounding components.

Estimated average-current calculation: use Iavg = Iactive × tactive + Isleep × tsleep over one complete operating cycle, then multiply by the supply voltage to estimate energy per cycle. For example, with 3.3 V, 10 mA active for 20 ms, and 5 µA sleep for 980 ms, the calculated average current is approximately 0.205 mA. Actual duty-cycle values must come from the deployed firmware and peripheral measurements.

Do not treat a same-package candidate as a guaranteed functional replacement. The EFM32ZG222F32-QFP48 changes the core and maximum clock speed, the HG candidates belong to different peripheral families, and the EFM32TG822F8-QFP48 has only 8 kB Flash. Review peripheral availability, interrupt behavior, startup files, firmware dependencies, and qualification before approving a substitution.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The manufacturer documentation should be used to confirm environmental, material, and automotive qualification requirements for the exact ordering code.

Dados verificados em: 2026-11-15 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

efm32tg222f32 qfp48 efm32tg222f32 d qfp48r EFM32TG222F32-D-QFP48 datasheet EFM32TG222F32-D-QFP48 datasheet pdf EFM32TG222F32-D-QFP48 pinout EFM32TG222F32-D-QFP48 equivalent EFM32TG222F32-D-QFP48 replacement EFM32TG222F32-D-QFP48 footprint Silicon Labs EFM32TG222F32-D-QFP48 EFM32TG222F32-D-QFP48 price EFM32TG222F32-D-QFP48 stock EFM32TG222F32-D-QFP48 vs EFM32ZG222F32-QFP48

Componentes & termos relacionados

Silicon Labs EFM32TG222F32-D-QFP48 EFM32TG222F32-QFP48 EFM32ZG222F32-QFP48 EFM32HG222F32G-A-QFP48 EFM32HG321F32G-A-QFP48R EFM32TG822F8-QFP48 ARM Cortex-M3 ARM Cortex-M0+ Tiny Gecko Zero Gecko microcontroller MCU 32-bit RISC embedded microcontroller semiconductor 32 kB Flash 4 kB RAM 37 digital I/O AES hardware operational amplifier 48-pin TQFP QFP family surface mount low-power mode fast wake-up 1.98 V to 3.8 V
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ