Silicon Labs

EFM32TG225F8-D-BGA48R - 32MHz Cortex-M3 MCU | Silicon Labs (Tape & Reel)

N.º da peça: EFM32TG225F8-D-BGA48R ✗ Fim de vida
1.98 V to 3.8 V Vdss 0.6 µA minimum Id 48-BGA (4 x 4 mm) Package 32 MHz Speed 8 KB (8K x 8) Memory
MOQ: 1 |

EFM32TG225F8-D-BGA48R Visão geral

Silicon Labs EFM32TG225F8-D-BGA48R is a 32-bit ARM Cortex-M3 microcontroller in a 48-BGA 4 x 4 mm package. It operates at up to 32 MHz, provides 8 KB of flash memory and 2 KB of RAM, and accepts a 1.98 V to 3.8 V supply. The device also includes AES encryption, three operational amplifiers, and configurable peripheral I/O for compact embedded control designs.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The EFM32TG series belongs to the hierarchy of embedded MCU, 32-bit microcontroller, ARM Cortex-M3 microcontroller, and energy-conscious embedded processor. Silicon Labs designed the Tiny Gecko family around low-power operation, autonomous peripherals, and extensive analog integration, making it useful for battery-powered equipment and compact industrial systems.

The principal features include a 32 MHz ARM Cortex-M3 core, 8 KB flash, 2 KB RAM, AES hardware acceleration, three op-amps, and a 1.98 V to 3.8 V operating range. The 48-BGA package supports dense PCB layouts where external flash, additional analog circuitry, or a larger package would be undesirable. Configurable peripheral I/O allows designers to assign functions such as communication, timers, and serial interfaces to available pins.

Power efficiency is a central architecture feature. According to the Silicon Labs EFM32TG datasheet, the family can consume as little as 0.6 microamp in Stop mode and 150 microamp per MHz in Run mode. These figures make average-current budgeting important: application code, interrupt frequency, peripheral activity, and sleep-mode entry strategy can change total consumption more than the headline CPU frequency alone.

Typical uses include low-power sensor nodes, industrial monitoring modules, portable measurement instruments, connected accessories, and compact control boards. The integrated analog resources can reduce the number of external components in low-voltage signal-conditioning systems, while AES support can protect stored or transmitted data without requiring a separate cryptographic accelerator.

When designing around this MCU, place decoupling capacitors close to the supply pins and use the package data in the Silicon Labs EFM32TG datasheet for the complete land pattern. Confirm all pin multiplexing, analog limits, and exposed-pad connections in the manufacturer pinout and hardware-design guidance before routing a PCB.

This product overview combines the verified device identity, package, memory, clock, voltage, and low-power characteristics with practical guidance for firmware, analog, and PCB implementation. It also distinguishes the available same-family upgrade paths by memory configuration and emphasizes the need to verify pin compatibility before substitution.

Alternativas drop-in para EFM32TG225F8-D-BGA48R — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com EFM32TG225F8-D-BGA48R (mesmo formato e footprint) — diferindo em Flash Memory, Package, Architecture, RAM, Mounting Type.

Silicon Labs
Flash Memory: 16 KB (16K x 8 bits)
Architecture: 32-bit
Comparar com EFM32TG225F8-D-BGA48R →
Silicon Labs
Flash Memory: 16 KB (16K x 8)
Package: 48-BGA (4 mm x 4 mm)
Architecture: 32-bit single-core
Comparar com EFM32TG225F8-D-BGA48R →
Silicon Labs
Flash Memory: 16KB (16K x 8)
Package: 48-BGA (4x4 mm)
Architecture: Single-core
Comparar com EFM32TG225F8-D-BGA48R →
Silicon Labs
Flash Memory: 16 KB (16K x 8)
RAM: 4 KB
Comparar com EFM32TG225F8-D-BGA48R →
Silicon Labs
Flash Memory: 32 KB
Package: 48-BGA, 4 x 4 mm
Mounting Type: Surface-mount BGA
Comparar com EFM32TG225F8-D-BGA48R →
Silicon Labs
Package: 48-BGA (4x4 mm)
Architecture: ARM 32-bit RISC
RAM: 2 KB
Comparar com EFM32TG225F8-D-BGA48R →

EFM32TG225F16-BGA48

✅ Drop-In ⚠️ Especificações não verificadas
Silicon Labs
📦 48-BGA (4 x 4 mm)
32-bit ARM Cortex-M3 microcontroller · Tiny Gecko · ARM Cortex-M3 · 32-bit · 32 MHz · 16 KB (16K x 8 bits) · 1.85 V to 3.8 V · 2.5 V or 3.3 V

Consulte o preço

Ver ficha técnica →

EFM32TG225F32-BGA48

✅ Drop-In ⚠️ Especificações não verificadas
📦 48-BGA (4 x 4 mm)
Flash increases from 8 KB to 32 KB, a 300% increase; CPU speed and supply range remain within 30%.

📋 Alternativa de referência (fora do catálogo)

EFM32TG825F8-BGA48

✅ Drop-In ⚠️ Especificações não verificadas
Silicon Labs
📦 48-BGA (4 x 4 mm)
32-bit ARM Cortex-M3 microcontroller · Tiny Gecko · ARM Cortex-M3 · 32 MHz · 8 KB (8K x 8) · 2 KB · 37 · 2 x 16-bit

Consulte o preço

Ver ficha técnica →

EFM32TG825F16-BGA48

✅ Drop-In ⚠️ Especificações não verificadas
Silicon Labs
📦 48-BGA (4 x 4 mm)
32-bit ARM Cortex-M3 microcontroller · Tiny Gecko · ARM Cortex-M3 · 32-bit single-core · 32 MHz · 16 KB (16K x 8) · 4 KB · 1.85 V to 3.8 V

Consulte o preço

Ver ficha técnica →

EFM32TG825F32-BGA48

✅ Drop-In ⚠️ Especificações não verificadas
Silicon Labs
📦 48-BGA (4 x 4 mm)
32-bit ARM Cortex-M3 microcontroller · ARM Cortex-M3 · 32 bit · 32 MHz · 32 KB · 32K x 8 · 1.85 V to 3.8 V

Consulte o preço

Ver ficha técnica →

EFM32TG225F8-D-BGA48R Classificações máximas e características elétricas

Product Type 32-bit ARM Cortex-M3 Microcontroller
Product Series EFM32 Tiny Gecko
Maximum CPU Frequency 32 MHz
Flash Memory 8 KB (8K x 8)
RAM 2 KB (2K x 8)
Core Architecture ARM Cortex-M3, 32-bit single-core
Supply Voltage Range 1.98 V to 3.8 V
Encapsulamento 48-BGA (4 x 4 mm)
Tipo de montagem Surface Mount
Faixa de temperatura de operação -40 °C to +85 °C
Stop Mode Current 0.6 µA minimum
Run Mode Current 150 µA/MHz
Cryptography Support AES hardware accelerator
Operational Amplifier Count 3
Peripheral I/O Configurable
Application Battery-powered embedded control

Guia de Configuração de Pinos do EFM32TG225F8-D-BGA48R 48-bga (4 x 4 mm)

Configuração de pinos para EFM32TG225F8-D-BGA48R (pacote 48-bga (4 x 4 mm)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 48-bga (4 x 4 mm) para EFM32TG225F8-D-BGA48R

Nenhum dado detalhado de pinagem disponível para EFM32TG225F8-D-BGA48R.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

EFM32TG225F8-D-BGA48R é adequado para 6 aplicaçãos: Battery-Powered Sensor Node, Portable Industrial Monitoring, Secure Connected Control Module, Low-Voltage Data Acquisition, Asset Tracking Device, Compact Instrumentation Controller.

🧩

Battery-Powered Sensor Node

The EFM32TG225F8-D-BGA48R fits a compact wireless or wired sensor node because its 32 MHz ARM Cortex-M3 core provides adequate processing speed while the EFM32TG family reaches as little as 0.6 µA in Stop mode. A sensor controller can wake periodically, sample an input, update state, and return to sleep without keeping every peripheral active. The 8 KB flash limits application size, so the firmware should use compact drivers and store larger datasets outside the MCU. Its 1.98 V to 3.8 V supply range supports low-voltage battery systems when paired with a regulator whose quiescent current fits the available power budget.

🏭

Portable Industrial Monitoring

For portable industrial monitoring equipment, the EFM32TG225F8-D-BGA48R combines a 32-bit Cortex-M3 processor with three integrated operational amplifiers in a 4 x 4 mm 48-BGA package. Those amplifiers can support signal-conditioning paths for low-level sensor inputs when their common-mode, output, and stability requirements fit the application. The MCU can also supervise thresholds and log state changes while operating from a 1.98 V to 3.8 V rail. Designers should reserve 8 KB flash and 2 KB RAM for control code, diagnostics, and buffering, and should verify analog-channel limitations against the manufacturer datasheet.

🌐

Secure Connected Control Module

The EFM32TG225F8-D-BGA48R is suitable for a compact connected control module that must protect commands, credentials, or transferred data. Its AES hardware accelerator offloads supported encryption operations from the Cortex-M3 core, leaving more processing capacity for communications and control tasks. The device operates from 1.98 V to 3.8 V and includes configurable peripheral I/O for serial links, timers, and status signaling. Security quality still depends on correct key handling, initialization, protocol design, and physical access controls; the accelerator alone does not protect plaintext or compromised endpoints.

📈

Low-Voltage Data Acquisition

The EFM32TG225F8-D-BGA48R can act as the supervisory controller in a low-voltage data-acquisition system. Its 32 MHz Cortex-M3 core handles configuration, sampling timing, threshold checks, and data transfer, while the integrated operational amplifiers may reduce front-end component count for compatible low-level signals. Because the device includes only 8 KB flash and 2 KB RAM, long acquisition records should be transferred or buffered externally. The 48-BGA footprint also requires careful escape routing and exposed-pad assembly, so the manufacturer package drawing and recommended land pattern should govern layout.

📱

Asset Tracking Device

An asset-tracking device benefits from the EFM32TG225F8-D-BGA48R because its small 4 x 4 mm BGA package leaves board area for a radio, sensor, and power system. The microcontroller can manage motion or environmental sensing, control a communications interval, and spend most of its time in a low-power state. The EFM32TG family's Stop-mode current can be as low as 0.6 µA, although the complete tracker will usually consume more because its radio and sensors remain active intermittently. The 1.98 V to 3.8 V operating range requires a regulator matched to the battery chemistry and peak radio load.

🖥️

Compact Instrumentation Controller

The EFM32TG225F8-D-BGA48R is well suited to a compact instrumentation controller built around sensor conditioning, status indicators, and a serial control interface. Its Cortex-M3 architecture supports deterministic 32-bit processing, configurable peripheral I/O reduces pin-routing constraints, and the three integrated op-amps can simplify selected analog tasks. The limited memory budget favors a focused firmware architecture rather than heavy frameworks or local data logging. For long acquisition campaigns, add external memory or a converter and validate the 1.98 V minimum supply during analog measurement conditions.

What is the EFM32TG225F8-D-BGA48R?
The EFM32TG225F8-D-BGA48R is a Silicon Labs 32-bit ARM Cortex-M3 microcontroller operating at up to 32 MHz with 8 KB flash, 2 KB RAM, AES acceleration, three operational amplifiers, and configurable peripheral I/O. According to the Silicon Labs EFM32TG datasheet, the device is packaged in a 48-BGA measuring 4 x 4 mm and operates from a 1.98 V to 3.8 V supply.
What are the key specifications of EFM32TG225F8-D-BGA48R?
The key specifications of the EFM32TG225F8-D-BGA48R include a 32 MHz ARM Cortex-M3 core, 8 KB flash memory, 2 KB RAM, and a 1.98 V to 3.8 V supply range. The 48-BGA 4 x 4 mm package also integrates an AES accelerator and three operational amplifiers. These figures identify it as a compact, low-power MCU intended for embedded control and measurement applications.
Where can I download the EFM32TG225F8-D-BGA48R datasheet PDF?
The EFM32TG225F8-D-BGA48R datasheet PDF is available from the official Silicon Labs EFM32TG document address on this page. The manufacturer document covers device variants, electrical characteristics, memory, peripherals, package information, and recommended operating conditions. Use the family document together with the exact device ordering information because the D suffix identifies a specific development configuration.
Where can I find the EFM32TG225F8-D-BGA48R pinout?
The official EFM32TG225F8-D-BGA48R pinout is found in the package information and pin-definition sections of the Silicon Labs EFM32TG datasheet. The device uses a 48-BGA footprint with an exposed thermal-pad arrangement that must be handled according to the manufacturer land-pattern guidance. Use that table for signal assignment and PCB routing rather than relying on a generic BGA drawing.
What is the operating voltage of EFM32TG225F8-D-BGA48R?
The EFM32TG225F8-D-BGA48R operates from 1.98 V to 3.8 V. The manufacturer device listing identifies this supply range, while the Silicon Labs EFM32TG datasheet provides the detailed operating conditions and timing limits. The design should maintain the supply within that range during startup, active operation, sleep transitions, and any attached peripheral activity.
How much power does the EFM32TG225F8-D-BGA48R consume?
The EFM32TG225F8-D-BGA48R can consume as little as 0.6 microamp in Stop mode and approximately 150 microamp per MHz in Run mode, according to the Silicon Labs EFM32TG datasheet. Actual system consumption depends on CPU loading, interrupts, active peripherals, analog circuitry, and the time spent asleep. Calculate the duty-cycle average from the operating modes used by the finished application.
What can replace the EFM32TG225F8-D-BGA48R?
The closest same-family alternatives include EFM32TG225F16-BGA48, EFM32TG225F32-BGA48, EFM32TG825F8-BGA48, EFM32TG825F16-BGA48, and EFM32TG825F32-BGA48, subject to firmware, memory, and peripheral requirements. These are family-level candidates rather than universal equivalents. Confirm the BGA pin map, power requirements, firmware dependencies, and exposed-pad layout in the Silicon Labs documentation before replacing the target.
Is EFM32TG225F8-D-BGA48R the same as EFM32TG225F8-BGA48T?
No, the EFM32TG225F8-D-BGA48R and EFM32TG225F8-BGA48T should not be treated as identical ordering codes. The web listing identifies EFM32TG225F8-BGA48T as a distinct device entry with the same 8 KB flash and 2 KB RAM configuration, but the suffix can encode ordering and packing differences. Check the manufacturer ordering table before deciding whether the electrical device and PCB footprint are interchangeable.
EFM32TG225F8-D-BGA48R vs EFM32TG225F16-BGA48: which is better?
Choose EFM32TG225F16-BGA48 when the firmware needs more flash than the target's 8 KB; choose the EFM32TG225F8-D-BGA48R when 8 KB is sufficient and the application does not require the additional memory. Both are identified as Cortex-M3 Tiny Gecko devices in 48-BGA packages, but software image size, data retention, and firmware organization must be checked before substitution.
When should I choose EFM32TG225F8-D-BGA48R over a larger-memory device?
Choose the EFM32TG225F8-D-BGA48R when a compact application fits within 8 KB flash and 2 KB RAM and the 48-BGA footprint provides a useful board-area saving. Retain a larger-memory member when application updates, diagnostics, protocol libraries, or working data exceed those resources. Software complexity and upgrade requirements should determine the choice rather than flash size alone.
Is EFM32TG225F8-D-BGA48R suitable for battery-powered devices?
Yes, the EFM32TG225F8-D-BGA48R is suitable for battery-powered embedded devices because the EFM32TG family supports low-power operation, including as little as 0.6 microamp in Stop mode. The design must still minimize active runtime, disable unused peripherals, and select an appropriate regulator for the 1.98 V to 3.8 V supply range. Battery life should be calculated from the completed firmware duty cycle.
What is the best Silicon Labs equivalent for EFM32TG225F8-D-BGA48R?
The most direct Silicon Labs alternatives are the higher-memory EFM32TG225F16-BGA48 and EFM32TG225F32-BGA48, plus the EFM32TG825F8-BGA48, EFM32TG825F16-BGA48, and EFM32TG825F32-BGA48 family members. Their relevance depends on the required flash, RAM, communications peripherals, firmware support, and exact BGA land pattern. No verified cross-brand drop-in equivalent was identified, so a cross-brand substitution requires a separate engineering review.
Can an EFM32TG225F8-D-BGA48R replacement use the same 48-BGA footprint?
A candidate may use the same 48-BGA outline, but package equality alone does not prove drop-in compatibility. The replacement must also match supply voltage, exposed-pad requirements, pin multiplexing, clock and memory resources, peripheral assignments, and software support. Review the Silicon Labs datasheets and application notes for each candidate before approving a production substitution.
Where can I buy EFM32TG225F8-D-BGA48R online?
Use the Request a Quote form on this page to request EFM32TG225F8-D-BGA48R pricing, stock confirmation, minimum order quantity, and current lead time. The form routes the request through XAIPART's commercial process without embedding a potentially stale price or availability statement. Include the exact 48-BGA ordering code and your requested quantity on the inquiry.
What is the price and lead time for EFM32TG225F8-D-BGA48R?
Current pricing and lead time for the EFM32TG225F8-D-BGA48R should be requested through the Request a Quote form on this page. A web listing references inventory and pricing, but it does not provide a qualifying quantity-break table for this exact ordering code. Submit the required quantity, packaging preference, delivery location, and target schedule so the order can be evaluated accurately.
Is EFM32TG225F8-D-BGA48R in stock?
Stock for EFM32TG225F8-D-BGA48R should be confirmed through the Request a Quote form on this page because inventory changes with supplier and lot position. The exact MPN, required quantity, and standard packing preference should be included in the request. This avoids treating a distributor search result as a firm allocation guarantee.

Dados de referência de engenharia para EFM32TG225F8-D-BGA48R — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the EFM32TG225F8-D-BGA48R when the application fits within 8 KB flash and 2 KB RAM, needs a 32 MHz Cortex-M3 core, and benefits from three integrated op-amps and AES acceleration in a 4 x 4 mm package. Select EFM32TG225F16-BGA48 or EFM32TG225F32-BGA48 when firmware size is the limiting factor but the broader TG225 peripheral set remains appropriate. Consider EFM32TG825F8-BGA48 when the expanded TG825 feature set is needed without increasing flash, and use the 16 KB or 32 KB TG825 versions when both expanded features and software headroom are required. No verified cross-brand drop-in equivalent was identified. Because MCU substitution also affects firmware, startup code, peripheral assignments, BGA assembly, and exposed-pad layout, validate the exact ordering code and manufacturer hardware documentation before production use.

Comparação com alternativas

Parâmetro Este produto EFM32TG225F16-BGA48 EFM32TG225F32-BGA48 EFM32TG825F8-BGA48 EFM32TG825F16-BGA48 EFM32TG825F32-BGA48
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Package 48-BGA (4 x 4 mm) 48-BGA (4 x 4 mm) 48-BGA (4 x 4 mm) 48-BGA (4 x 4 mm) 48-BGA (4 x 4 mm) 48-BGA (4 x 4 mm)
Flash Memory 8 KB (8K x 8) 16 KB 32 KB 8 KB 16 KB 32 KB

Principais diferenciais

  • Smallest verified flash configuration in the compared EFM32TG225 and EFM32TG825 families (vs EFM32TG225F16-BGA48)
  • Lower flash demand supports compact embedded firmware (vs EFM32TG225F32-BGA48)
  • Same compact package family while retaining three integrated op-amps and AES support (vs EFM32TG825F32-BGA48)
  • Low-power 32-bit control in a compact surface-mount package (vs EFM32TG825F8-BGA48)

Notas de projeto

Use the official 48-BGA land pattern, including its exposed-pad connection, rather than a generic BGA template. Place the required supply and ground decoupling capacitors adjacent to their associated device pins, and keep high-current return paths short. The 4 x 4 mm footprint also demands careful PCB trace escape planning, so verify manufacturing capability, solder-mask definition, and assembly requirements before committing the board layout.

Estimated: with a 3.3 V supply, 3.0 V output target, and 10 mA active load, the ideal linear-regulator dissipation is (3.3 V - 3.0 V) x 0.010 A = 3 mW. Actual dissipation also includes MCU and peripheral current, regulator efficiency, and quiescent consumption. Select the rail so the MCU remains within its 1.98 V to 3.8 V operating range under startup, radio bursts, and analog load transients.

Do not treat flash capacity as the only firmware constraint. An 8 KB image leaves little room for a large framework, logging subsystem, or duplicated libraries, while 2 KB of RAM can constrain buffered measurements and protocol stacks. Build with the exact device configuration, test under realistic interrupt and peripheral loading, and review the manufacturer ordering information before using a suffix variant as a substitution.

Separate analog and digital return currents where practical, keep sensitive sensor inputs away from switching nodes and the exposed-pad thermal path, and use the shortest practical connections to the integrated op-amp pins. Confirm each analog pin's multiplexing, input range, output capability, and stability requirements in the EFM32TG datasheet. PCB placement should support thermal dissipation without creating high-frequency coupling into precision measurement circuits.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

Compliance attributes were not established by the cited manufacturer page or datasheet and therefore remain unknown.

Buscas relacionadas

EFM32TG225F8-D-BGA48R EFM32TG225F8-D-BGA48R datasheet EFM32TG225F8-D-BGA48R pinout EFM32TG225F8-D-BGA48R datasheet pdf EFM32TG225F8-D-BGA48R equivalent EFM32TG225F8-D-BGA48R replacement EFM32TG225F8-D-BGA48R price EFM32TG225F8-D-BGA48R stock Silicon Labs EFM32TG225F8-D-BGA48R EFM32TG225F8-D-BGA48R 32MHz Cortex-M3 EFM32TG225F8-D-BGA48R 48-BGA footprint EFM32TG225F8-D-BGA48R application circuit EFM32TG225F8-D-BGA48R vs EFM32TG225F16-BGA48 EFM32TG225F8-D-BGA48R battery powered

Componentes & termos relacionados

Silicon Labs EFM32TG225F8-D-BGA48R EFM32TG225F16-BGA48 EFM32TG225F32-BGA48 EFM32TG825F8-BGA48 EFM32TG825F16-BGA48 EFM32TG825F32-BGA48 ARM Cortex-M3 EFM32 Tiny Gecko 32-bit microcontroller embedded MCU semiconductor 48-BGA BGA package family surface-mount package AES hardware accelerator operational amplifier configurable peripheral I/O 1.98 V to 3.8 V power supply 32 MHz processor clock 8 KB flash memory 2 KB RAM Stop mode Run mode battery-powered embedded control
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ