EFM32TG225F8-D-BGA48R - 32MHz Cortex-M3 MCU | Silicon Labs (Tape & Reel)
부품 번호: EFM32TG225F8-D-BGA48R ✗ 단종EFM32TG225F8-D-BGA48R 개요
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The EFM32TG series belongs to the hierarchy of embedded MCU, 32-bit microcontroller, ARM Cortex-M3 microcontroller, and energy-conscious embedded processor. Silicon Labs designed the Tiny Gecko family around low-power operation, autonomous peripherals, and extensive analog integration, making it useful for battery-powered equipment and compact industrial systems.
The principal features include a 32 MHz ARM Cortex-M3 core, 8 KB flash, 2 KB RAM, AES hardware acceleration, three op-amps, and a 1.98 V to 3.8 V operating range. The 48-BGA package supports dense PCB layouts where external flash, additional analog circuitry, or a larger package would be undesirable. Configurable peripheral I/O allows designers to assign functions such as communication, timers, and serial interfaces to available pins.
Power efficiency is a central architecture feature. According to the Silicon Labs EFM32TG datasheet, the family can consume as little as 0.6 microamp in Stop mode and 150 microamp per MHz in Run mode. These figures make average-current budgeting important: application code, interrupt frequency, peripheral activity, and sleep-mode entry strategy can change total consumption more than the headline CPU frequency alone.
Typical uses include low-power sensor nodes, industrial monitoring modules, portable measurement instruments, connected accessories, and compact control boards. The integrated analog resources can reduce the number of external components in low-voltage signal-conditioning systems, while AES support can protect stored or transmitted data without requiring a separate cryptographic accelerator.
When designing around this MCU, place decoupling capacitors close to the supply pins and use the package data in the Silicon Labs EFM32TG datasheet for the complete land pattern. Confirm all pin multiplexing, analog limits, and exposed-pad connections in the manufacturer pinout and hardware-design guidance before routing a PCB.
This product overview combines the verified device identity, package, memory, clock, voltage, and low-power characteristics with practical guidance for firmware, analog, and PCB implementation. It also distinguishes the available same-family upgrade paths by memory configuration and emphasizes the need to verify pin compatibility before substitution.
드롭인 대체품: EFM32TG225F8-D-BGA48R — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EFM32TG225F8-D-BGA48R (동일 폼 팩터 및 풋프린트) — 차이점: Flash Memory, Package, Architecture, RAM, Mounting Type.
EFM32TG225F16-BGA48
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →EFM32TG225F32-BGA48
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
EFM32TG825F8-BGA48
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →EFM32TG825F16-BGA48
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →EFM32TG825F32-BGA48
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →EFM32TG225F8-D-BGA48R 최대 정격 & 전기적 특성
| Product Type | 32-bit ARM Cortex-M3 Microcontroller |
| Product Series | EFM32 Tiny Gecko |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 8 KB (8K x 8) |
| RAM | 2 KB (2K x 8) |
| Core Architecture | ARM Cortex-M3, 32-bit single-core |
| Supply Voltage Range | 1.98 V to 3.8 V |
| 패키지 | 48-BGA (4 x 4 mm) |
| 실장 유형 | Surface Mount |
| 동작 온도 범위 | -40 °C to +85 °C |
| Stop Mode Current | 0.6 µA minimum |
| Run Mode Current | 150 µA/MHz |
| Cryptography Support | AES hardware accelerator |
| Operational Amplifier Count | 3 |
| Peripheral I/O | Configurable |
| Application | Battery-powered embedded control |
EFM32TG225F8-D-BGA48R 48-bga (4 x 4 mm) 핀 구성 가이드
EFM32TG225F8-D-BGA48R(48-bga (4 x 4 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: EFM32TG225F8-D-BGA48R.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
EFM32TG225F8-D-BGA48R 적합 용도: 6 애플리케이션s: Battery-Powered Sensor Node, Portable Industrial Monitoring, Secure Connected Control Module, Low-Voltage Data Acquisition, Asset Tracking Device, Compact Instrumentation Controller.
Battery-Powered Sensor Node
The EFM32TG225F8-D-BGA48R fits a compact wireless or wired sensor node because its 32 MHz ARM Cortex-M3 core provides adequate processing speed while the EFM32TG family reaches as little as 0.6 µA in Stop mode. A sensor controller can wake periodically, sample an input, update state, and return to sleep without keeping every peripheral active. The 8 KB flash limits application size, so the firmware should use compact drivers and store larger datasets outside the MCU. Its 1.98 V to 3.8 V supply range supports low-voltage battery systems when paired with a regulator whose quiescent current fits the available power budget.
추천
Portable Industrial Monitoring
For portable industrial monitoring equipment, the EFM32TG225F8-D-BGA48R combines a 32-bit Cortex-M3 processor with three integrated operational amplifiers in a 4 x 4 mm 48-BGA package. Those amplifiers can support signal-conditioning paths for low-level sensor inputs when their common-mode, output, and stability requirements fit the application. The MCU can also supervise thresholds and log state changes while operating from a 1.98 V to 3.8 V rail. Designers should reserve 8 KB flash and 2 KB RAM for control code, diagnostics, and buffering, and should verify analog-channel limitations against the manufacturer datasheet.
추천
Secure Connected Control Module
The EFM32TG225F8-D-BGA48R is suitable for a compact connected control module that must protect commands, credentials, or transferred data. Its AES hardware accelerator offloads supported encryption operations from the Cortex-M3 core, leaving more processing capacity for communications and control tasks. The device operates from 1.98 V to 3.8 V and includes configurable peripheral I/O for serial links, timers, and status signaling. Security quality still depends on correct key handling, initialization, protocol design, and physical access controls; the accelerator alone does not protect plaintext or compromised endpoints.
추천
Low-Voltage Data Acquisition
The EFM32TG225F8-D-BGA48R can act as the supervisory controller in a low-voltage data-acquisition system. Its 32 MHz Cortex-M3 core handles configuration, sampling timing, threshold checks, and data transfer, while the integrated operational amplifiers may reduce front-end component count for compatible low-level signals. Because the device includes only 8 KB flash and 2 KB RAM, long acquisition records should be transferred or buffered externally. The 48-BGA footprint also requires careful escape routing and exposed-pad assembly, so the manufacturer package drawing and recommended land pattern should govern layout.
추천
Asset Tracking Device
An asset-tracking device benefits from the EFM32TG225F8-D-BGA48R because its small 4 x 4 mm BGA package leaves board area for a radio, sensor, and power system. The microcontroller can manage motion or environmental sensing, control a communications interval, and spend most of its time in a low-power state. The EFM32TG family's Stop-mode current can be as low as 0.6 µA, although the complete tracker will usually consume more because its radio and sensors remain active intermittently. The 1.98 V to 3.8 V operating range requires a regulator matched to the battery chemistry and peak radio load.
추천
Compact Instrumentation Controller
The EFM32TG225F8-D-BGA48R is well suited to a compact instrumentation controller built around sensor conditioning, status indicators, and a serial control interface. Its Cortex-M3 architecture supports deterministic 32-bit processing, configurable peripheral I/O reduces pin-routing constraints, and the three integrated op-amps can simplify selected analog tasks. The limited memory budget favors a focused firmware architecture rather than heavy frameworks or local data logging. For long acquisition campaigns, add external memory or a converter and validate the 1.98 V minimum supply during analog measurement conditions.
추천
추천 제품 요약
엔지니어링 참조 데이터: EFM32TG225F8-D-BGA48R — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EFM32TG225F16-BGA48 | EFM32TG225F32-BGA48 | EFM32TG825F8-BGA48 | EFM32TG825F16-BGA48 | EFM32TG825F32-BGA48 |
|---|---|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 48-BGA (4 x 4 mm) | 48-BGA (4 x 4 mm) | 48-BGA (4 x 4 mm) | 48-BGA (4 x 4 mm) | 48-BGA (4 x 4 mm) | 48-BGA (4 x 4 mm) |
| Flash Memory | 8 KB (8K x 8) | 16 KB | 32 KB | 8 KB | 16 KB | 32 KB |
주요 차별점
- Smallest verified flash configuration in the compared EFM32TG225 and EFM32TG825 families (vs EFM32TG225F16-BGA48)
- Lower flash demand supports compact embedded firmware (vs EFM32TG225F32-BGA48)
- Same compact package family while retaining three integrated op-amps and AES support (vs EFM32TG825F32-BGA48)
- Low-power 32-bit control in a compact surface-mount package (vs EFM32TG825F8-BGA48)
설계 노트
Use the official 48-BGA land pattern, including its exposed-pad connection, rather than a generic BGA template. Place the required supply and ground decoupling capacitors adjacent to their associated device pins, and keep high-current return paths short. The 4 x 4 mm footprint also demands careful PCB trace escape planning, so verify manufacturing capability, solder-mask definition, and assembly requirements before committing the board layout.
Estimated: with a 3.3 V supply, 3.0 V output target, and 10 mA active load, the ideal linear-regulator dissipation is (3.3 V - 3.0 V) x 0.010 A = 3 mW. Actual dissipation also includes MCU and peripheral current, regulator efficiency, and quiescent consumption. Select the rail so the MCU remains within its 1.98 V to 3.8 V operating range under startup, radio bursts, and analog load transients.
Do not treat flash capacity as the only firmware constraint. An 8 KB image leaves little room for a large framework, logging subsystem, or duplicated libraries, while 2 KB of RAM can constrain buffered measurements and protocol stacks. Build with the exact device configuration, test under realistic interrupt and peripheral loading, and review the manufacturer ordering information before using a suffix variant as a substitution.
Separate analog and digital return currents where practical, keep sensitive sensor inputs away from switching nodes and the exposed-pad thermal path, and use the shortest practical connections to the integrated op-amp pins. Confirm each analog pin's multiplexing, input range, output capability, and stability requirements in the EFM32TG datasheet. PCB placement should support thermal dissipation without creating high-frequency coupling into precision measurement circuits.
규정 준수 정보
Compliance attributes were not established by the cited manufacturer page or datasheet and therefore remain unknown.