Intel

EPF10K130EQC240-1N - 130K Gates FLEX 10KE FPGA, 240-PQFP | Intel

N.º da peça: EPF10K130EQC240-1N ✗ Fim de vida

Em estoque Enviado em 1 a 3 dias úteis

2.375 V to 2.625 V (2.5 V nominal) Vdss 240-BFQFP / 240-PQFP, 32 × 32 mm Package 333.33 MHz Speed 64 Kbit (4 × EAB, 2,048 bits each) Memory

A partir de $88.4 USD / unidade

MOQ: 1 |

Preço atualizado: 2026-09-11

Preços por volume

Qtd.	Preço unitário	Total
1	$145	$145,00
10	$128.5	$1.285,00
100	$112	$11.200,00
250	$99.75	$24.937,50
500	$88.4	$44.200,00

ℹ️ Todos os preços estão em USD

Ver datasheet (PDF) Ver alternativas

Quantidade

EPF10K130EQC240-1N Visão geral

The Intel (formerly Altera) EPF10K130EQC240-1N is a FLEX 10KE family Field-Programmable Gate Array (FPGA) integrating 130,000 system gates with 6,656 logic elements and 65,536 bits of embedded SRAM, fabricated on a 0.22 µm (some sources cite 0.25 µm) CMOS process and housed in a 240-pin Plastic Quad Flat Pack (PQFP / 240-BFQFP) measuring 32x32 mm. The device operates from a 2.375 V to 2.625 V (2.5 V nominal) core supply, supports 186 user I/Os, and contains 832 Logic Array Blocks (LABs) implementing a built-in SRAM configuration memory so the bitstream reloads on every power-up.

A Field-Programmable Gate Array is a reconfigurable digital integrated circuit that combines programmable logic elements, an interconnect matrix, and I/O blocks in a single die. Within the broader programmable-logic taxonomy, FPGAs sit above small CPLDs and below ASICs in density; the FLEX 10KE family in particular targets glue-logic, bus-bridging, and mid-density state-machine designs of the late 1990s/early 2000s, before the Cyclone and Stratix families displaced FLEX 10KE in new designs. Engineers chose the FLEX 10KE family for SRAM-based reconfigurability, embedded memory blocks, and the mature Quartus II design-flow support.

Key specifications include 64 Kbit embedded block RAM (EAB), 342,000 maximum system gates, 4 Embedded Array Blocks (EABs) of 2,048 bits each, 333.33 MHz maximum internal operating frequency, and -40 °C to +85 °C commercial operating temperature range (note the -1N speed grade). The -1N suffix designates the faster -1 speed grade combined with an industrial/lead-free reflow profile; the package is lead-free (Pb-free) and RoHS compliant, while older -1 / -2 / -3 grades used SnPb lead finish. Compared with the -3 (slowest) grade, the -1 grade delivers the highest internal performance in this family.

Typical applications include telecom interface cards (T1/E1, Utopia, POS-PHY bridging), industrial control boards, mid-density glue logic between microprocessors and peripherals, ISA/PCI bus bridges, and legacy replacement of 74-series TTL arrays in long-lifecycle equipment. The 186 user I/Os and 64 Kbit of embedded RAM also make it suitable for protocol converters and small packet-processing engines on FPGA fabric.

When designing with this part, ensure the 2.5 V core rail is well decoupled with 0.1 µF and 10 µF capacitors near each supply pin, and route all 186 I/Os through 5 V-tolerant banks if the board mixes 3.3 V and 5 V logic. Quartus II (legacy) or the Quartus Prime FLEX 10KE device-support add-on is required for synthesis, fitting, and bitstream generation.

This page combines distributor pricing, SameFrame pin-migration alternatives, and practical design guidance not found in the original FLEX 10KE datasheet, helping engineers evaluating EOL inventory or performing legacy board-maintenance sourcing.

Alternativas drop-in para EPF10K130EQC240-1N — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com EPF10K130EQC240-1N (mesmo formato e footprint) — diferindo em Operating Temperature, Total RAM Bits, Package, Mounting Type, Configuration Method.

EPF10K100EQC240-1N

Intel

Operating Temperature: 0 °C to 70 °C (commercial)

Mounting Type: Surface Mount