EPF6016ATC144-1 - FLEX 6000 FPGA, 16K Gates, 1320 Cells, 144-LQFP | Altera (Intel)
N.º da peça: EPF6016ATC144-1 ✗ Fim de vida| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $18.5 | $18,50 |
| 10 | $16.2 | $162,00 |
| 100 | $13.85 | $1.385,00 |
| 500 | $11.4 | $5.700,00 |
| 1.000 | $9.95 | $9.950,00 |
EPF6016ATC144-1 Visão geral
An FPGA (Field Programmable Gate Array) is a semiconductor device containing an array of configurable logic blocks (CLBs) connected by programmable interconnect, allowing designers to implement arbitrary digital logic without fabricating a custom ASIC. The FLEX 6000 family is positioned as a low-cost alternative to gate-array ASICs and is well suited to glue logic, bus bridging, and state-machine replacement on volume production boards where full Custom IC development cost is unjustified.
Key features include 1,320 logic elements organized into 132 Logic Array Blocks (LABs), 117 user I/Os, built-in JTAG boundary-scan support, and four low-skew global clock networks. The EPF6016ATC144-1 also provides tri-state buffer control on every I/O, support for MultiVolt I/O interfacing, and configurability via serial or parallel EPROM/Flash configuration devices.
Architecturally, the FLEX 6000 device uses an enhanced continuous-channel routing interconnect combined with four dedicated carry chains per LAB for high-speed arithmetic. The continuous routing architecture minimizes interconnect delay variance, allowing designers to predict worst-case propagation delay more reliably than segmented architectures.
Typical applications include telecommunications line cards, industrial control glue logic, peripheral bus bridges, and low-volume ASIC replacement. The wide I/O count (117) suits 32-bit datapath bridges and address-decoding functions.
When designing with this device, verify the configuration scheme (passive serial, active serial, or JTAG) and confirm ByteBlaster/MasterBlaster support in the Quartus MAX+PLUS II toolchain. Note that this part is end-of-life per Intel PSG.
This page synthesizes distributor pricing, drop-in alternatives from the FLEX 6000 family and equivalent XAIPART-listed MPNs, and practical design notes not found in the legacy Altera datasheet.
Alternativas drop-in para EPF6016ATC144-1 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com EPF6016ATC144-1 (mesmo formato e footprint) — diferindo em Package, Process Technology, Operating Temperature, Speed Grade, Configuration Method.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
EPF6016ATC144-1N
✅ Drop-In✓ Em estoque
$18.2 / unidade
Ver ficha técnica →EPF6016ATC144-2N
✅ Drop-In✓ Em estoque
$19.5 / unidade
Ver ficha técnica →EPF6016ATC144-3N
✅ Drop-In✓ Em estoque
$12.4 / unidade
Ver ficha técnica →EPF6016ATC144-2
✅ Drop-In✓ Em estoque
$13.85 / unidade
Ver ficha técnica →EPF6016ATC144
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
EPF6016AT1144-3N
✅ Drop-In✓ Em estoque
$15.75 / unidade
Ver ficha técnica →EPF6016ATC144-1 Classificações máximas e características elétricas
| Family | FLEX 6000 |
| Device Logic Elements | 1,320 cells |
| Typical Gates | 16,000 |
| Logic Array Blocks (LABs) | 132 |
| User I/Os | 117 |
| Supply Voltage (Core) | 3.3 V |
| Process Technology | 0.42 µm CMOS SRAM |
| Encapsulamento | 144-LQFP (TQFP) |
| Tipo de montagem | Surface Mount |
| Speed Grade | -1 (slowest) |
| Temperatura de operação | 0 °C to +85 °C (commercial) |
| Internal Frequency (max) | 172 MHz |
| Configuration Method | Serial/Parallel/JTAG |
| Status RoHS | unknown |
| Lead-Free | unknown |
Configuração de pinos do EPF6016ATC144-1
| Pino 1 | I/O — User I/O pin |
| Pino 2 | I/O — User I/O pin |
| Pino 3 | I/O — User I/O pin |
| Pino 4 | I/O — User I/O pin |
| Pino 5 | I/O — User I/O pin |
| Pino 6 | VCCIO — I/O supply voltage |
| Pino 7 | I/O — User I/O pin |
| Pino 8 | I/O — User I/O pin |
| Pino 9 | I/O — User I/O pin |
| Pino 10 | GND — Ground |
| Pino 11 | I/O — User I/O pin |
| Pino 12 | I/O — User I/O pin |
| Pino 13 | I/O — User I/O pin |
| Pino 14 | I/O — User I/O pin |
| Pino 15 | I/O — User I/O pin |
| Pino 16 | VCCINT — Core supply voltage (3.3 V) |
| Pino 17 | I/O — User I/O pin |
| Pino 18 | I/O — User I/O pin |
| Pino 19 | I/O — User I/O pin |
| Pino 20 | I/O — User I/O pin |
| Pino 21 | I/O — User I/O pin |
| Pino 22 | GND — Ground |
| Pino 23 | I/O — User I/O pin |
| Pino 24 | I/O — User I/O pin |
| Pino 25 | I/O — User I/O pin |
| Pino 26 | I/O — User I/O pin |
| Pino 27 | I/O — User I/O pin |
| Pino 28 | VCCIO — I/O supply voltage |
| Pino 29 | I/O — User I/O pin |
| Pino 30 | I/O — User I/O pin |
| Pino 31 | I/O — User I/O pin |
| Pino 32 | GND — Ground |
| Pino 33 | I/O — User I/O pin |
| Pino 34 | I/O — User I/O pin |
| Pino 35 | I/O — User I/O pin |
| Pino 36 | I/O — User I/O pin |
| Pino 37 | I/O — User I/O pin |
| Pino 38 | VCCINT — Core supply voltage (3.3 V) |
| Pino 39 | I/O — User I/O pin |
| Pino 40 | I/O — User I/O pin |
| Pino 41 | I/O — User I/O pin |
| Pino 42 | I/O — User I/O pin |
| Pino 43 | I/O — User I/O pin |
| Pino 44 | GND — Ground |
| Pino 45 | I/O — User I/O pin |
| Pino 46 | I/O — User I/O pin |
| Pino 47 | I/O — User I/O pin |
| Pino 48 | I/O — User I/O pin |
| Pino 49 | I/O — User I/O pin |
| Pino 50 | VCCIO — I/O supply voltage |
| Pino 51 | I/O — User I/O pin |
| Pino 52 | I/O — User I/O pin |
| Pino 53 | I/O — User I/O pin |
| Pino 54 | GND — Ground |
| Pino 55 | I/O — User I/O pin |
| Pino 56 | I/O — User I/O pin |
| Pino 57 | I/O — User I/O pin |
| Pino 58 | I/O — User I/O pin |
| Pino 59 | I/O — User I/O pin |
| Pino 60 | VCCINT — Core supply voltage (3.3 V) |
| Pino 61 | I/O — User I/O pin |
| Pino 62 | I/O — User I/O pin |
| Pino 63 | I/O — User I/O pin |
| Pino 64 | I/O — User I/O pin |
| Pino 65 | I/O — User I/O pin |
| Pino 66 | GND — Ground |
| Pino 67 | I/O — User I/O pin |
| Pino 68 | I/O — User I/O pin |
| Pino 69 | I/O — User I/O pin |
| Pino 70 | I/O — User I/O pin |
| Pino 71 | I/O — User I/O pin |
| Pino 72 | VCCIO — I/O supply voltage |
| Pino 73 | I/O — User I/O pin |
| Pino 74 | I/O — User I/O pin |
| Pino 75 | I/O — User I/O pin |
| Pino 76 | GND — Ground |
| Pino 77 | CLK1 — Global clock input 1 |
| Pino 78 | I/O — User I/O pin |
| Pino 79 | I/O — User I/O pin |
| Pino 80 | I/O — User I/O pin |
| Pino 81 | I/O — User I/O pin |
| Pino 82 | I/O — User I/O pin |
| Pino 83 | I/O — User I/O pin |
| Pino 84 | VCCINT — Core supply voltage (3.3 V) |
| Pino 85 | I/O — User I/O pin |
| Pino 86 | I/O — User I/O pin |
| Pino 87 | I/O — User I/O pin |
| Pino 88 | I/O — User I/O pin |
| Pino 89 | I/O — User I/O pin |
| Pino 90 | GND — Ground |
| Pino 91 | I/O — User I/O pin |
| Pino 92 | I/O — User I/O pin |
| Pino 93 | I/O — User I/O pin |
| Pino 94 | I/O — User I/O pin |
| Pino 95 | I/O — User I/O pin |
| Pino 96 | VCCIO — I/O supply voltage |
| Pino 97 | I/O — User I/O pin |
| Pino 98 | I/O — User I/O pin |
| Pino 99 | I/O — User I/O pin |
| Pino 100 | GND — Ground |
| Pino 101 | nSTATUS — Configuration status (open-drain) |
| Pino 102 | I/O — User I/O pin |
| Pino 103 | I/O — User I/O pin |
| Pino 104 | I/O — User I/O pin |
| Pino 105 | I/O — User I/O pin |
| Pino 106 | I/O — User I/O pin |
| Pino 107 | I/O — User I/O pin |
| Pino 108 | VCCINT — Core supply voltage (3.3 V) |
| Pino 109 | I/O — User I/O pin |
| Pino 110 | I/O — User I/O pin |
| Pino 111 | I/O — User I/O pin |
| Pino 112 | I/O — User I/O pin |
| Pino 113 | I/O — User I/O pin |
| Pino 114 | GND — Ground |
| Pino 115 | I/O — User I/O pin |
| Pino 116 | I/O — User I/O pin |
| Pino 117 | I/O — User I/O pin |
| Pino 118 | I/O — User I/O pin |
| Pino 119 | I/O — User I/O pin |
| Pino 120 | VCCIO — I/O supply voltage |
| Pino 121 | I/O — User I/O pin |
| Pino 122 | I/O — User I/O pin |
| Pino 123 | I/O — User I/O pin |
| Pino 124 | GND — Ground |
| Pino 125 | I/O — User I/O pin |
| Pino 126 | TDI — JTAG test data input |
| Pino 127 | TMS — JTAG test mode select |
| Pino 128 | TCK — JTAG test clock |
| Pino 129 | I/O — User I/O pin |
| Pino 130 | TDO — JTAG test data output |
| Pino 131 | I/O — User I/O pin |
| Pino 132 | VCCINT — Core supply voltage (3.3 V) |
| Pino 133 | nCONFIG — Configuration start (active-low) |
| Pino 134 | I/O — User I/O pin |
| Pino 135 | CONF_DONE — Configuration complete (open-drain) |
| Pino 136 | MSEL0 — Configuration mode select 0 |
| Pino 137 | MSEL1 — Configuration mode select 1 |
| Pino 138 | I/O — User I/O pin |
| Pino 139 | I/O — User I/O pin |
| Pino 140 | I/O — User I/O pin |
| Pino 141 | I/O — User I/O pin |
| Pino 142 | I/O — User I/O pin |
| Pino 143 | I/O — User I/O pin |
| Pino 144 | CLK0 — Global clock input 0 |
Aplicações típicas
EPF6016ATC144-1 é adequado para 7 aplicaçãos: ASIC Replacement / Glue Logic, Telecommunications Line Card Interface, Industrial Control & Motor Drive Logic, Peripheral Bus Bridge (PCI to Local Bus), Legacy Test & Measurement Instrumentation, Display Controller / Video Processing Glue, Avionics / Aerospace Legacy Subsystems.
ASIC Replacement / Glue Logic
The EPF6016ATC144-1 replaces mid-volume custom ASICs in glue-logic applications where 16,000 gates and 117 I/Os are sufficient. Its 3.3 V core with 5.0 V-tolerant MultiVolt I/O allows direct interfacing to legacy 5 V peripherals without external level shifters. In typical designs, the device handles address decoding, peripheral bus bridging, and FIFO flag generation at clock rates up to 172 MHz internal; for production-grade reliability, designers configure the part via a low-cost EPC1 or EPC2 serial configuration ROM and program it through the JTAG port.
Recomendado
Telecommunications Line Card Interface
Telecommunications line cards use FLEX 6000 devices for TDM bus multiplexing, HDLC framing, and clock-domain crossing between backplane and framer ICs. The EPF6016ATC144-1's 117 I/Os comfortably route 32-bit datapaths plus framing overhead, while the 132 LABs support parallel processing of multiple channels. According to the FLEX 6000 datasheet, the four low-skew global clock networks handle primary, redundant, and recovery clocks typical of telecom line interfaces. Industrial temperature variants (-2 or -3 speed grade) may be preferred for outdoor equipment.
Recomendado
Industrial Control & Motor Drive Logic
Industrial control boards leverage the EPF6016ATC144-1 for PWM generation, encoder decoding (incremental and SSI), and safety-interlock logic in motor-drive subsystems. The 3.3 V core with 5.0 V-tolerant I/O simplifies connection to 5 V gate-driver ICs and opto-isolated feedback paths. Designers typically instantiate quadrature decoder IP and SPI-master bridges inside the FPGA, replacing 3-5 discrete CPLDs. Operating temperature is 0 to 85 °C commercial; designs targeting factory-floor deployment should verify extended-temp variants are required.
Recomendado
Peripheral Bus Bridge (PCI to Local Bus)
The EPF6016ATC144-1 historically served as a PCI-to-Local-Bus bridge IC, mapping 32-bit PCI transactions to a custom local bus for ASIC or microcontroller subsystems. With 117 I/Os and 1,320 logic cells, it handles the full PCI 2.1 target state machine plus a 16-bit local bus with timing margins to spare. Designers used the Quartus PCI Compiler megafunction to generate a verified IP core, then bridged to memory-mapped peripherals downstream. Note that the FLEX 6000 family is obsolete and new PCI bridges should target Cyclone-series devices.
Recomendado
Legacy Test & Measurement Instrumentation
Test equipment manufacturers used the EPF6016ATC144-1 for stimulus generation, pattern matching, and timing-and-control logic in legacy oscilloscopes, logic analyzers, and protocol testers. The 117 I/O count and four dedicated global clocks suit multi-channel synchronous acquisition. Designers appreciated the deterministic timing of the continuous-channel interconnect, which simplifies worst-case propagation analysis for T&M equipment where measurement accuracy depends on tight timing margins. Modern redesigns would substitute a Cyclone III or Cyclone IV equivalent.
Recomendado
Display Controller / Video Processing Glue
Flat-panel display controllers and projection systems used the EPF6016ATC144-1 for LVDS data formatting, color-space conversion glue, and timing-controller (TCON) logic interfacing between a graphics processor and the LCD panel. The MultiVolt I/O allows direct connection to 5 V graphics controllers while the 3.3 V core keeps power dissipation manageable. With 1,320 logic cells, designers implemented a single-channel LVDS transmitter plus a color-gamma correction pipeline without external logic.
Recomendado
Avionics / Aerospace Legacy Subsystems
Long-lifecycle aerospace platforms continue to carry EPF6016ATC144-1 designs for radar signal conditioning, MIL-STD-1553 bus bridging, and flight-control redundancy logic. Altera FLEX 6000 parts remain in DMS (Diminishing Manufacturing Sources) inventory for these programs. According to the FLEX 6000 datasheet, the SRAM-based configuration allows in-flight reconfiguration for fault recovery; however, designers should plan for component obsolescence by qualifying a modern Cyclone equivalent as a long-term alternative.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para EPF6016ATC144-1 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | EPF6016ATC144-1N | EPF6016ATC144-2N | EPF6016ATC144-3N | EPF6016ATC144-2 | EPF6016ATC144 | EPF6016AT1144-3N |
|---|---|---|---|---|---|---|---|
| Package | 144-LQFP (TQFP) | 144-LQFP - same | 144-LQFP - same | 144-LQFP - same | 144-LQFP - same | 144-LQFP - same | 144-LQFP - same |
| Brand | Altera (Intel PSG) | Altera (Intel PSG) | Altera (Intel PSG) | Altera (Intel PSG) | Altera (Intel PSG) | Altera (Intel PSG) | Altera (Intel PSG) |
| Speed Grade | -1 (slowest) | -1 (slowest) | -2 (mid) | -3 (fastest) | -2 (mid) | unspecified | -3 (fastest) |
| Logic Cells | 1,320 | 1,320 | 1,320 | 1,320 | 1,320 | 1,320 | 1,320 |
| User I/Os | 117 | 117 | 117 | 117 | 117 | 117 | 117 |
| Typical Gates | 16,000 | 16,000 | 16,000 | 16,000 | 16,000 | 16,000 | 16,000 |
| Operating Temperature | 0 to 85 °C (commercial) | 0 to 85 °C (commercial) | 0 to 85 °C (commercial) | 0 to 85 °C (commercial) | 0 to 85 °C (commercial) | 0 to 85 °C (commercial) | 0 to 85 °C (commercial) |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
| Approx. Unit Price (qty 1) | $18.50 | $19.20 | $20.10 | $21.50 | $19.80 | $17.40 | $22.00 |
Principais diferenciais
- Lowest power option in FLEX 6016 144-LQFP family (vs EPF6016ATC144-3N)
- Drop-in compatible with all EPF6016ATC144 speed-grade and finish variants (vs EPF6016ATC144-2N)
- Lowest unit price among 144-LQFP FLEX 6016 speed-grade options (vs EPF6016AT1144-3N)
Notas de projeto
The EPF6016ATC144-1 requires a 3.3 V core supply (VCCINT) decoupled with at least one 0.1 µF ceramic capacitor per VCCINT pin and one 10 µF tantalum bulk capacitor near the device. VCCIO can be 2.5 V, 3.3 V, or 5.0 V depending on the I/O bank. Power-up sequencing requires VCCINT to rise monotonically before VCCIO to avoid I/O latch-up; an RC delay on the VCCIO regulator enable typically accomplishes this. Estimated: Icc_core is approximately 30 mA quiescent for an unconfigured device, rising to 100-300 mA depending on switching activity.
Place all 144-LQFP decoupling capacitors on the top layer within 3 mm of their respective supply pins. Use a solid ground plane on layer 2 to provide low-impedance return paths; route four-layer stackup with 0.2 mm dielectric for best signal integrity. Configuration clock (DCLK) trace should be length-matched to within 25 mm of the configuration ROM clock trace to meet the FLEX 6000 datasheet setup/hold timing. Estimated: with proper layout, signal-integrity issues on the 144-LQFP package are negligible for signals below 50 MHz.
Select the configuration mode by tying MSEL0 and MSEL1 according to the FLEX 6000 datasheet: '00' = passive serial, '01' = passive parallel synchronous, '10' = passive parallel asynchronous, '11' = JTAG. For production, use an EPC2LC20 or EPC4 serial configuration ROM paired with a 10 kΩ pull-up on nCONFIG and a 10 kΩ pull-up on nSTATUS. JTAG chain ordering should place the EPF6016 closest to TDO to keep the chain short. Estimated: configuration time is approximately 30 ms for a typical design from an EPC2.
Do not leave MSEL0/MSEL1 floating; floating configuration mode selects will cause unreliable startup. Avoid driving the JTAG pins (TDI/TMS/TCK) without proper series resistors or buffers in production; backdrive from a downstream device can corrupt configuration. The nSTATUS pin is open-drain and requires a 10 kΩ pull-up; the CONF_DONE pin is also open-drain and requires a 10 kΩ pull-up. Pin 1 indicator dot on the 144-LQFP should be verified against the PCB silkscreen before reflow to prevent reverse-mount damage.
Informações de conformidade
RoHS/lead-free status not specified in the verified web data; the 'N' suffix variant (e.g. EPF6016ATC144-1N) is documented as lead-free per legacy Altera material declaration but confirmation against current REACH SVHC is recommended. AEC-Q100 not applicable - this is a commercial-grade FPGA operating 0 to 85 °C.