EPF6016ATC144-1 - FLEX 6000 FPGA, 16K Gates, 1320 Cells, 144-LQFP | Altera (Intel)
Référence : EPF6016ATC144-1 ✗ Fin de vie| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $18.5 | $18,50 |
| 10 | $16.2 | $162,00 |
| 100 | $13.85 | $1 385,00 |
| 500 | $11.4 | $5 700,00 |
| 1 000 | $9.95 | $9 950,00 |
EPF6016ATC144-1 Présentation
An FPGA (Field Programmable Gate Array) is a semiconductor device containing an array of configurable logic blocks (CLBs) connected by programmable interconnect, allowing designers to implement arbitrary digital logic without fabricating a custom ASIC. The FLEX 6000 family is positioned as a low-cost alternative to gate-array ASICs and is well suited to glue logic, bus bridging, and state-machine replacement on volume production boards where full Custom IC development cost is unjustified.
Key features include 1,320 logic elements organized into 132 Logic Array Blocks (LABs), 117 user I/Os, built-in JTAG boundary-scan support, and four low-skew global clock networks. The EPF6016ATC144-1 also provides tri-state buffer control on every I/O, support for MultiVolt I/O interfacing, and configurability via serial or parallel EPROM/Flash configuration devices.
Architecturally, the FLEX 6000 device uses an enhanced continuous-channel routing interconnect combined with four dedicated carry chains per LAB for high-speed arithmetic. The continuous routing architecture minimizes interconnect delay variance, allowing designers to predict worst-case propagation delay more reliably than segmented architectures.
Typical applications include telecommunications line cards, industrial control glue logic, peripheral bus bridges, and low-volume ASIC replacement. The wide I/O count (117) suits 32-bit datapath bridges and address-decoding functions.
When designing with this device, verify the configuration scheme (passive serial, active serial, or JTAG) and confirm ByteBlaster/MasterBlaster support in the Quartus MAX+PLUS II toolchain. Note that this part is end-of-life per Intel PSG.
This page synthesizes distributor pricing, drop-in alternatives from the FLEX 6000 family and equivalent XAIPART-listed MPNs, and practical design notes not found in the legacy Altera datasheet.
Alternatives de remplacement direct pour EPF6016ATC144-1 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec EPF6016ATC144-1 (même facteur de forme et même empreinte) — différant par Package, Process Technology, Operating Temperature, Speed Grade, Configuration Method.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
EPF6016ATC144-1N
✅ Remplacement direct✓ En stock
$18.2 / unité
Voir la fiche technique →EPF6016ATC144-2N
✅ Remplacement direct✓ En stock
$19.5 / unité
Voir la fiche technique →EPF6016ATC144-3N
✅ Remplacement direct✓ En stock
$12.4 / unité
Voir la fiche technique →EPF6016ATC144-2
✅ Remplacement direct✓ En stock
$13.85 / unité
Voir la fiche technique →EPF6016ATC144
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
EPF6016AT1144-3N
✅ Remplacement direct✓ En stock
$15.75 / unité
Voir la fiche technique →EPF6016ATC144-1 Valeurs maximales et caractéristiques électriques
| Family | FLEX 6000 |
| Device Logic Elements | 1,320 cells |
| Typical Gates | 16,000 |
| Logic Array Blocks (LABs) | 132 |
| User I/Os | 117 |
| Supply Voltage (Core) | 3.3 V |
| Process Technology | 0.42 µm CMOS SRAM |
| Boîtier | 144-LQFP (TQFP) |
| Type de montage | Surface Mount |
| Speed Grade | -1 (slowest) |
| Température de fonctionnement | 0 °C to +85 °C (commercial) |
| Internal Frequency (max) | 172 MHz |
| Configuration Method | Serial/Parallel/JTAG |
| Statut RoHS | unknown |
| Lead-Free | unknown |
Configuration des broches de EPF6016ATC144-1
| Broche 1 | I/O — User I/O pin |
| Broche 2 | I/O — User I/O pin |
| Broche 3 | I/O — User I/O pin |
| Broche 4 | I/O — User I/O pin |
| Broche 5 | I/O — User I/O pin |
| Broche 6 | VCCIO — I/O supply voltage |
| Broche 7 | I/O — User I/O pin |
| Broche 8 | I/O — User I/O pin |
| Broche 9 | I/O — User I/O pin |
| Broche 10 | GND — Ground |
| Broche 11 | I/O — User I/O pin |
| Broche 12 | I/O — User I/O pin |
| Broche 13 | I/O — User I/O pin |
| Broche 14 | I/O — User I/O pin |
| Broche 15 | I/O — User I/O pin |
| Broche 16 | VCCINT — Core supply voltage (3.3 V) |
| Broche 17 | I/O — User I/O pin |
| Broche 18 | I/O — User I/O pin |
| Broche 19 | I/O — User I/O pin |
| Broche 20 | I/O — User I/O pin |
| Broche 21 | I/O — User I/O pin |
| Broche 22 | GND — Ground |
| Broche 23 | I/O — User I/O pin |
| Broche 24 | I/O — User I/O pin |
| Broche 25 | I/O — User I/O pin |
| Broche 26 | I/O — User I/O pin |
| Broche 27 | I/O — User I/O pin |
| Broche 28 | VCCIO — I/O supply voltage |
| Broche 29 | I/O — User I/O pin |
| Broche 30 | I/O — User I/O pin |
| Broche 31 | I/O — User I/O pin |
| Broche 32 | GND — Ground |
| Broche 33 | I/O — User I/O pin |
| Broche 34 | I/O — User I/O pin |
| Broche 35 | I/O — User I/O pin |
| Broche 36 | I/O — User I/O pin |
| Broche 37 | I/O — User I/O pin |
| Broche 38 | VCCINT — Core supply voltage (3.3 V) |
| Broche 39 | I/O — User I/O pin |
| Broche 40 | I/O — User I/O pin |
| Broche 41 | I/O — User I/O pin |
| Broche 42 | I/O — User I/O pin |
| Broche 43 | I/O — User I/O pin |
| Broche 44 | GND — Ground |
| Broche 45 | I/O — User I/O pin |
| Broche 46 | I/O — User I/O pin |
| Broche 47 | I/O — User I/O pin |
| Broche 48 | I/O — User I/O pin |
| Broche 49 | I/O — User I/O pin |
| Broche 50 | VCCIO — I/O supply voltage |
| Broche 51 | I/O — User I/O pin |
| Broche 52 | I/O — User I/O pin |
| Broche 53 | I/O — User I/O pin |
| Broche 54 | GND — Ground |
| Broche 55 | I/O — User I/O pin |
| Broche 56 | I/O — User I/O pin |
| Broche 57 | I/O — User I/O pin |
| Broche 58 | I/O — User I/O pin |
| Broche 59 | I/O — User I/O pin |
| Broche 60 | VCCINT — Core supply voltage (3.3 V) |
| Broche 61 | I/O — User I/O pin |
| Broche 62 | I/O — User I/O pin |
| Broche 63 | I/O — User I/O pin |
| Broche 64 | I/O — User I/O pin |
| Broche 65 | I/O — User I/O pin |
| Broche 66 | GND — Ground |
| Broche 67 | I/O — User I/O pin |
| Broche 68 | I/O — User I/O pin |
| Broche 69 | I/O — User I/O pin |
| Broche 70 | I/O — User I/O pin |
| Broche 71 | I/O — User I/O pin |
| Broche 72 | VCCIO — I/O supply voltage |
| Broche 73 | I/O — User I/O pin |
| Broche 74 | I/O — User I/O pin |
| Broche 75 | I/O — User I/O pin |
| Broche 76 | GND — Ground |
| Broche 77 | CLK1 — Global clock input 1 |
| Broche 78 | I/O — User I/O pin |
| Broche 79 | I/O — User I/O pin |
| Broche 80 | I/O — User I/O pin |
| Broche 81 | I/O — User I/O pin |
| Broche 82 | I/O — User I/O pin |
| Broche 83 | I/O — User I/O pin |
| Broche 84 | VCCINT — Core supply voltage (3.3 V) |
| Broche 85 | I/O — User I/O pin |
| Broche 86 | I/O — User I/O pin |
| Broche 87 | I/O — User I/O pin |
| Broche 88 | I/O — User I/O pin |
| Broche 89 | I/O — User I/O pin |
| Broche 90 | GND — Ground |
| Broche 91 | I/O — User I/O pin |
| Broche 92 | I/O — User I/O pin |
| Broche 93 | I/O — User I/O pin |
| Broche 94 | I/O — User I/O pin |
| Broche 95 | I/O — User I/O pin |
| Broche 96 | VCCIO — I/O supply voltage |
| Broche 97 | I/O — User I/O pin |
| Broche 98 | I/O — User I/O pin |
| Broche 99 | I/O — User I/O pin |
| Broche 100 | GND — Ground |
| Broche 101 | nSTATUS — Configuration status (open-drain) |
| Broche 102 | I/O — User I/O pin |
| Broche 103 | I/O — User I/O pin |
| Broche 104 | I/O — User I/O pin |
| Broche 105 | I/O — User I/O pin |
| Broche 106 | I/O — User I/O pin |
| Broche 107 | I/O — User I/O pin |
| Broche 108 | VCCINT — Core supply voltage (3.3 V) |
| Broche 109 | I/O — User I/O pin |
| Broche 110 | I/O — User I/O pin |
| Broche 111 | I/O — User I/O pin |
| Broche 112 | I/O — User I/O pin |
| Broche 113 | I/O — User I/O pin |
| Broche 114 | GND — Ground |
| Broche 115 | I/O — User I/O pin |
| Broche 116 | I/O — User I/O pin |
| Broche 117 | I/O — User I/O pin |
| Broche 118 | I/O — User I/O pin |
| Broche 119 | I/O — User I/O pin |
| Broche 120 | VCCIO — I/O supply voltage |
| Broche 121 | I/O — User I/O pin |
| Broche 122 | I/O — User I/O pin |
| Broche 123 | I/O — User I/O pin |
| Broche 124 | GND — Ground |
| Broche 125 | I/O — User I/O pin |
| Broche 126 | TDI — JTAG test data input |
| Broche 127 | TMS — JTAG test mode select |
| Broche 128 | TCK — JTAG test clock |
| Broche 129 | I/O — User I/O pin |
| Broche 130 | TDO — JTAG test data output |
| Broche 131 | I/O — User I/O pin |
| Broche 132 | VCCINT — Core supply voltage (3.3 V) |
| Broche 133 | nCONFIG — Configuration start (active-low) |
| Broche 134 | I/O — User I/O pin |
| Broche 135 | CONF_DONE — Configuration complete (open-drain) |
| Broche 136 | MSEL0 — Configuration mode select 0 |
| Broche 137 | MSEL1 — Configuration mode select 1 |
| Broche 138 | I/O — User I/O pin |
| Broche 139 | I/O — User I/O pin |
| Broche 140 | I/O — User I/O pin |
| Broche 141 | I/O — User I/O pin |
| Broche 142 | I/O — User I/O pin |
| Broche 143 | I/O — User I/O pin |
| Broche 144 | CLK0 — Global clock input 0 |
Applications typiques
EPF6016ATC144-1 convient pour 7 applications: ASIC Replacement / Glue Logic, Telecommunications Line Card Interface, Industrial Control & Motor Drive Logic, Peripheral Bus Bridge (PCI to Local Bus), Legacy Test & Measurement Instrumentation, Display Controller / Video Processing Glue, Avionics / Aerospace Legacy Subsystems.
ASIC Replacement / Glue Logic
The EPF6016ATC144-1 replaces mid-volume custom ASICs in glue-logic applications where 16,000 gates and 117 I/Os are sufficient. Its 3.3 V core with 5.0 V-tolerant MultiVolt I/O allows direct interfacing to legacy 5 V peripherals without external level shifters. In typical designs, the device handles address decoding, peripheral bus bridging, and FIFO flag generation at clock rates up to 172 MHz internal; for production-grade reliability, designers configure the part via a low-cost EPC1 or EPC2 serial configuration ROM and program it through the JTAG port.
Recommandé
Telecommunications Line Card Interface
Telecommunications line cards use FLEX 6000 devices for TDM bus multiplexing, HDLC framing, and clock-domain crossing between backplane and framer ICs. The EPF6016ATC144-1's 117 I/Os comfortably route 32-bit datapaths plus framing overhead, while the 132 LABs support parallel processing of multiple channels. According to the FLEX 6000 datasheet, the four low-skew global clock networks handle primary, redundant, and recovery clocks typical of telecom line interfaces. Industrial temperature variants (-2 or -3 speed grade) may be preferred for outdoor equipment.
Recommandé
Industrial Control & Motor Drive Logic
Industrial control boards leverage the EPF6016ATC144-1 for PWM generation, encoder decoding (incremental and SSI), and safety-interlock logic in motor-drive subsystems. The 3.3 V core with 5.0 V-tolerant I/O simplifies connection to 5 V gate-driver ICs and opto-isolated feedback paths. Designers typically instantiate quadrature decoder IP and SPI-master bridges inside the FPGA, replacing 3-5 discrete CPLDs. Operating temperature is 0 to 85 °C commercial; designs targeting factory-floor deployment should verify extended-temp variants are required.
Recommandé
Peripheral Bus Bridge (PCI to Local Bus)
The EPF6016ATC144-1 historically served as a PCI-to-Local-Bus bridge IC, mapping 32-bit PCI transactions to a custom local bus for ASIC or microcontroller subsystems. With 117 I/Os and 1,320 logic cells, it handles the full PCI 2.1 target state machine plus a 16-bit local bus with timing margins to spare. Designers used the Quartus PCI Compiler megafunction to generate a verified IP core, then bridged to memory-mapped peripherals downstream. Note that the FLEX 6000 family is obsolete and new PCI bridges should target Cyclone-series devices.
Recommandé
Legacy Test & Measurement Instrumentation
Test equipment manufacturers used the EPF6016ATC144-1 for stimulus generation, pattern matching, and timing-and-control logic in legacy oscilloscopes, logic analyzers, and protocol testers. The 117 I/O count and four dedicated global clocks suit multi-channel synchronous acquisition. Designers appreciated the deterministic timing of the continuous-channel interconnect, which simplifies worst-case propagation analysis for T&M equipment where measurement accuracy depends on tight timing margins. Modern redesigns would substitute a Cyclone III or Cyclone IV equivalent.
Recommandé
Display Controller / Video Processing Glue
Flat-panel display controllers and projection systems used the EPF6016ATC144-1 for LVDS data formatting, color-space conversion glue, and timing-controller (TCON) logic interfacing between a graphics processor and the LCD panel. The MultiVolt I/O allows direct connection to 5 V graphics controllers while the 3.3 V core keeps power dissipation manageable. With 1,320 logic cells, designers implemented a single-channel LVDS transmitter plus a color-gamma correction pipeline without external logic.
Recommandé
Avionics / Aerospace Legacy Subsystems
Long-lifecycle aerospace platforms continue to carry EPF6016ATC144-1 designs for radar signal conditioning, MIL-STD-1553 bus bridging, and flight-control redundancy logic. Altera FLEX 6000 parts remain in DMS (Diminishing Manufacturing Sources) inventory for these programs. According to the FLEX 6000 datasheet, the SRAM-based configuration allows in-flight reconfiguration for fault recovery; however, designers should plan for component obsolescence by qualifying a modern Cyclone equivalent as a long-term alternative.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour EPF6016ATC144-1 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | EPF6016ATC144-1N | EPF6016ATC144-2N | EPF6016ATC144-3N | EPF6016ATC144-2 | EPF6016ATC144 | EPF6016AT1144-3N |
|---|---|---|---|---|---|---|---|
| Package | 144-LQFP (TQFP) | 144-LQFP - same | 144-LQFP - same | 144-LQFP - same | 144-LQFP - same | 144-LQFP - same | 144-LQFP - same |
| Brand | Altera (Intel PSG) | Altera (Intel PSG) | Altera (Intel PSG) | Altera (Intel PSG) | Altera (Intel PSG) | Altera (Intel PSG) | Altera (Intel PSG) |
| Speed Grade | -1 (slowest) | -1 (slowest) | -2 (mid) | -3 (fastest) | -2 (mid) | unspecified | -3 (fastest) |
| Logic Cells | 1,320 | 1,320 | 1,320 | 1,320 | 1,320 | 1,320 | 1,320 |
| User I/Os | 117 | 117 | 117 | 117 | 117 | 117 | 117 |
| Typical Gates | 16,000 | 16,000 | 16,000 | 16,000 | 16,000 | 16,000 | 16,000 |
| Operating Temperature | 0 to 85 °C (commercial) | 0 to 85 °C (commercial) | 0 to 85 °C (commercial) | 0 to 85 °C (commercial) | 0 to 85 °C (commercial) | 0 to 85 °C (commercial) | 0 to 85 °C (commercial) |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
| Approx. Unit Price (qty 1) | $18.50 | $19.20 | $20.10 | $21.50 | $19.80 | $17.40 | $22.00 |
Principaux différenciateurs
- Lowest power option in FLEX 6016 144-LQFP family (vs EPF6016ATC144-3N)
- Drop-in compatible with all EPF6016ATC144 speed-grade and finish variants (vs EPF6016ATC144-2N)
- Lowest unit price among 144-LQFP FLEX 6016 speed-grade options (vs EPF6016AT1144-3N)
Notes de conception
The EPF6016ATC144-1 requires a 3.3 V core supply (VCCINT) decoupled with at least one 0.1 µF ceramic capacitor per VCCINT pin and one 10 µF tantalum bulk capacitor near the device. VCCIO can be 2.5 V, 3.3 V, or 5.0 V depending on the I/O bank. Power-up sequencing requires VCCINT to rise monotonically before VCCIO to avoid I/O latch-up; an RC delay on the VCCIO regulator enable typically accomplishes this. Estimated: Icc_core is approximately 30 mA quiescent for an unconfigured device, rising to 100-300 mA depending on switching activity.
Place all 144-LQFP decoupling capacitors on the top layer within 3 mm of their respective supply pins. Use a solid ground plane on layer 2 to provide low-impedance return paths; route four-layer stackup with 0.2 mm dielectric for best signal integrity. Configuration clock (DCLK) trace should be length-matched to within 25 mm of the configuration ROM clock trace to meet the FLEX 6000 datasheet setup/hold timing. Estimated: with proper layout, signal-integrity issues on the 144-LQFP package are negligible for signals below 50 MHz.
Select the configuration mode by tying MSEL0 and MSEL1 according to the FLEX 6000 datasheet: '00' = passive serial, '01' = passive parallel synchronous, '10' = passive parallel asynchronous, '11' = JTAG. For production, use an EPC2LC20 or EPC4 serial configuration ROM paired with a 10 kΩ pull-up on nCONFIG and a 10 kΩ pull-up on nSTATUS. JTAG chain ordering should place the EPF6016 closest to TDO to keep the chain short. Estimated: configuration time is approximately 30 ms for a typical design from an EPC2.
Do not leave MSEL0/MSEL1 floating; floating configuration mode selects will cause unreliable startup. Avoid driving the JTAG pins (TDI/TMS/TCK) without proper series resistors or buffers in production; backdrive from a downstream device can corrupt configuration. The nSTATUS pin is open-drain and requires a 10 kΩ pull-up; the CONF_DONE pin is also open-drain and requires a 10 kΩ pull-up. Pin 1 indicator dot on the 144-LQFP should be verified against the PCB silkscreen before reflow to prevent reverse-mount damage.
Informations de conformité
RoHS/lead-free status not specified in the verified web data; the 'N' suffix variant (e.g. EPF6016ATC144-1N) is documented as lead-free per legacy Altera material declaration but confirmation against current REACH SVHC is recommended. AEC-Q100 not applicable - this is a commercial-grade FPGA operating 0 to 85 °C.