ICS180M-03 - 28MHz Low EMI Clock Generator | Renesas
N.º da peça: ICS180M-03 ✓ AtivoICS180M-03 Visão geral
A spread-spectrum clock generator is a clock and timing IC that deliberately varies clock frequency over a defined range. This frequency spreading distributes spectral energy across multiple bins, reducing the peak conducted and radiated emissions produced by a narrowband digital clock. The ICS180M-03 belongs to the clock generator, PLL, and frequency-synthesizer hierarchy within clock and timing semiconductor products.
The principal features of the ICS180M-03 include one clock-generating circuit, support for either clock or crystal inputs, CMOS output logic, and a 1:1 input-to-output frequency ratio. Its maximum operating output frequency is 28 MHz. These characteristics make it suitable for systems that require a low-EMI reference clock while retaining a conventional, single-output clock architecture.
Internally, the device combines analog and digital phase-locked-loop functions. The PLL locks the generated output to the external clock or crystal reference, while spread-spectrum operation broadens the output spectrum and lowers its peak frequency concentration. The manufacturer datasheet describes this combination as a method for producing a low-EMI output clock while preserving accurate frequency generation.
Typical applications include EMI-sensitive digital equipment, interface and communication modules, embedded control systems, and general-purpose clock-distribution designs. In each case, the part can provide the system timing reference while limiting narrowband emissions from the associated clock line. The 8-SOIC surface-mount package also supports standard automated PCB assembly and compact board-space utilization.
When designing around the ICS180M-03, preserve the recommended input, output, and decoupling connections described in the manufacturer datasheet. Pay particular attention to crystal or clock-source stability because a phase-locked-loop generator derives its output from that reference. Confirm the intended supply voltage, output loading, trace topology, and EMI target before releasing the PCB layout.
This product page combines the device specifications, sourcing guidance, application context, and practical design considerations engineers need when evaluating the ICS180M-03 for a low-EMI clock-generation design.
Alternativas drop-in para ICS180M-03 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
ICS180M-03LF
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
ICS180-03
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
ICS180M-03 Especificações
| Product Type | Spread Spectrum Clock Generator |
| Maximum Output Frequency | 28 MHz |
| Supply Voltage Range | 3.135 V to 5.5 V |
| Number of Circuits | 1 circuit |
| PLL | Yes |
| Input Type | Clock or crystal |
| Tipo de saída | CMOS |
| Input-to-Output Frequency Ratio | 1:1 |
| Encapsulamento | 8-SOIC, 3.90 mm width |
| Tipo de montagem | Surface mount |
| Shipping Package | Tube |
| EMI Feature | Low-EMI output |
| Contagem de pinos | 8 pins |
Guia de Configuração de Pinos do ICS180M-03 tube
Configuração de pinos para ICS180M-03 (pacote tube). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.
Nenhum dado detalhado de pinagem disponível para ICS180M-03.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
ICS180M-03 é adequado para 6 aplicaçãos: EMI-Sensitive Digital Control Equipment, Communication Interface Modules, Embedded Control Systems, Industrial Measurement Equipment, EMI-Controlled Consumer Electronics, General-Purpose Clock Distribution.
EMI-Sensitive Digital Control Equipment
The ICS180M-03 fits digital control equipment where a fixed-frequency clock could produce concentrated narrowband emissions. Its spread-spectrum CMOS output reaches up to 28 MHz and is generated from a clock or crystal reference through mixed analog and digital PLL circuitry. Placing the device at the timing origin allows the clock spectrum to be spread before it reaches switching logic, helping reduce clock-related conducted and radiated emissions. The 8-SOIC package supports compact surface-mount assembly, while the 1:1 input-to-output ratio simplifies clock-tree planning. Designers should verify output loading, reference-source requirements, decoupling, and the final emissions margin against the manufacturer application guidance.
Communication Interface Modules
The ICS180M-03 can supply the low-EMI system clock used by compact communication interface modules operating below 28 MHz. A spread-spectrum clock reduces the energy concentrated around one carrier, which can be valuable when a module contains fast digital edges and must meet strict internal emission limits. The part accepts either a clock or crystal source, giving a designer flexibility in the reference architecture. Its CMOS output and single-circuit configuration also keep the clock-generation stage compact. Use the manufacturer pin and layout guidance to route the reference input, supply, and output cleanly, and confirm that the selected module’s timing margin accommodates the device’s spread-spectrum characteristics.
Embedded Control Systems
The ICS180M-03 is suitable as the clock source for embedded control systems that operate from a 3.135 V to 5.5 V rail and require an output clock no higher than 28 MHz. The spread-spectrum output can reduce the peak spectral contribution of the system clock, while the 1:1 ratio supports straightforward reference selection. Because the device contains PLL circuitry, the stability and startup behavior of the selected crystal or clock source directly influence the generated output. Keep the timing path short, provide the connections required by the manufacturer datasheet, and validate startup and clock quality over the complete environmental range used by the equipment.
Industrial Measurement Equipment
Industrial measurement equipment can use the ICS180M-03 to generate a low-EMI clock for control, capture, or communications sections. Spreading the clock spectrum may assist systems that combine digital processing with sensitive analog front ends, especially when reducing narrowband clock energy is a design priority. The ICS180M-03 operates from 3.135 V to 5.5 V and provides one CMOS clock output with a maximum frequency of 28 MHz. The 8-SOIC footprint allows placement near the clock-consuming circuitry to minimize trace length. Validate the clock’s contribution to the complete system spectrum and use the manufacturer’s recommended layout to prevent additional emissions from the reference and output routing.
EMI-Controlled Consumer Electronics
The ICS180M-03 offers a compact timing solution for consumer electronics where a narrow clock spectrum could complicate electromagnetic-emissions testing. Its low-EMI spread-spectrum output operates up to 28 MHz and accepts either a crystal or external clock, allowing integration into appliances, controllers, or peripheral electronics with different reference arrangements. The single CMOS output and 8-SOIC surface-mount package support automated assembly and compact layouts. Keep decoupling and clock traces compact, and observe the manufacturer’s grounding and output-connection recommendations. Because the available product summary does not state the spread percentage or jitter limits, those characteristics should be confirmed from the datasheet before high-speed signal-path use.
General-Purpose Clock Distribution
The ICS180M-03 can serve as the first low-EMI clock-generation stage in a small distribution network. Its 1:1 input-to-output ratio allows a 28 MHz reference to support the maximum listed output, while the CMOS output can feed compatible downstream buffer or distribution devices. This arrangement is useful when a system needs reduced narrowband clock energy without a programmable multi-output synthesizer. The 3.135 V to 5.5 V operating range supports common low-voltage rails, and the 8-SOIC package simplifies board integration. Confirm source and sink current requirements, clock-tree impedance, fan-out, and skew before adding downstream devices, using the manufacturer datasheet as the electrical authority.
Dados de referência de engenharia para ICS180M-03 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto |
|---|---|
| Brand | Renesas Electronics |
| Package | 8-SOIC |
| Product Type | Spread Spectrum Clock Generator |
| Maximum Output Frequency | 28 MHz |
| Supply Voltage Range | 3.135 V to 5.5 V |
| Input Type | Clock or crystal |
| Output Type | CMOS |
| Input-to-Output Ratio | 1:1 |
| Number of Circuits | 1 circuit |
| PLL | Yes |
Notas de projeto
Use the manufacturer pin-description table and package drawing to assign the supply, ground, reference-input, and CMOS-output connections. Place the required bypass capacitors close to their associated pins, and keep the reference and clock-output traces short. The 8-SOIC package is small enough that pin-assignment mistakes or long return paths can materially degrade clock quality and EMI performance.
Treat the crystal or external clock as the reference for the PLL-based output and follow the manufacturer’s stability and component recommendations. If an external clock is used, verify its amplitude, frequency, and jitter against the input requirements. When a crystal is used, observe the specified load capacitance and startup layout because incorrect loading can prevent reliable oscillation or produce an unstable clock.
The low-EMI spread-spectrum feature should be considered at the PCB level rather than used as a substitute for good layout. Keep the reference oscillator loop compact, return noisy switching currents directly to ground, and avoid routing the sensitive clock across split planes. Confirm the completed design with emission measurements because clock harmonics and PCB structures can create emissions that are not represented by the fundamental 28 MHz output specification.
Informações de conformidade
Compliance declarations are not stated in the available product information. Confirm the current material and environmental declarations with Renesas before using the part in regulated equipment.