Renesas Electronics

ICS180M-03 - 28MHz Low EMI Clock Generator | Renesas

MPN: ICS180M-03 ✓ فعال
3.135 V to 5.5 V Vdss 8-SOIC, 3.90 mm width Package 28 MHz Speed
MOQ: 1 |

ICS180M-03 جائزہ

Renesas ICS180M-03 is a low-EMI spread-spectrum clock generator that accepts a clock or crystal input and produces a CMOS output clock with a maximum frequency of 28 MHz. The device uses mixed analog and digital phase-locked-loop technology to reduce electromagnetic interference. It is packaged in an 8-pin SOIC measuring 0.154 inch, or 3.90 mm, in width and operates from 3.135 V to 5.5 V.

A spread-spectrum clock generator is a clock and timing IC that deliberately varies clock frequency over a defined range. This frequency spreading distributes spectral energy across multiple bins, reducing the peak conducted and radiated emissions produced by a narrowband digital clock. The ICS180M-03 belongs to the clock generator, PLL, and frequency-synthesizer hierarchy within clock and timing semiconductor products.

The principal features of the ICS180M-03 include one clock-generating circuit, support for either clock or crystal inputs, CMOS output logic, and a 1:1 input-to-output frequency ratio. Its maximum operating output frequency is 28 MHz. These characteristics make it suitable for systems that require a low-EMI reference clock while retaining a conventional, single-output clock architecture.

Internally, the device combines analog and digital phase-locked-loop functions. The PLL locks the generated output to the external clock or crystal reference, while spread-spectrum operation broadens the output spectrum and lowers its peak frequency concentration. The manufacturer datasheet describes this combination as a method for producing a low-EMI output clock while preserving accurate frequency generation.

Typical applications include EMI-sensitive digital equipment, interface and communication modules, embedded control systems, and general-purpose clock-distribution designs. In each case, the part can provide the system timing reference while limiting narrowband emissions from the associated clock line. The 8-SOIC surface-mount package also supports standard automated PCB assembly and compact board-space utilization.

When designing around the ICS180M-03, preserve the recommended input, output, and decoupling connections described in the manufacturer datasheet. Pay particular attention to crystal or clock-source stability because a phase-locked-loop generator derives its output from that reference. Confirm the intended supply voltage, output loading, trace topology, and EMI target before releasing the PCB layout.

This product page combines the device specifications, sourcing guidance, application context, and practical design considerations engineers need when evaluating the ICS180M-03 for a low-EMI clock-generation design.

کے لیے ڈراپ اِن متبادل ICS180M-03 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

ICS180M-03LF

✅ ڈراپ-اِن
📦 SOIC-8
Related low-EMI clock-generator ordering variant; exact electrical and pin-level differences require datasheet confirmation

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

ICS180-03

✅ ڈراپ-اِن
📦 SOIC-8
Base-family spread-spectrum clock generator; suffix, qualification, and electrical differences require datasheet confirmation

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

ICS180M-03 تفصیلات

Product Type Spread Spectrum Clock Generator
Maximum Output Frequency 28 MHz
Supply Voltage Range 3.135 V to 5.5 V
Number of Circuits 1 circuit
PLL Yes
Input Type Clock or crystal
آؤٹ پٹ کی قسم CMOS
Input-to-Output Frequency Ratio 1:1
پیکیج 8-SOIC, 3.90 mm width
ماؤنٹنگ ٹائپ Surface mount
Shipping Package Tube
EMI Feature Low-EMI output
پن کی تعداد 8 pins

ICS180M-03 tube پن کنفیگریشن گائیڈ

ICS180M-03 (tube پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔

ICS180M-03 کے لیے tube پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں ICS180M-03.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

ICS180M-03 کے لیے موزوں ہے 6 ایپلیکیشنs: EMI-Sensitive Digital Control Equipment, Communication Interface Modules, Embedded Control Systems, Industrial Measurement Equipment, EMI-Controlled Consumer Electronics, General-Purpose Clock Distribution.

🔧

EMI-Sensitive Digital Control Equipment

The ICS180M-03 fits digital control equipment where a fixed-frequency clock could produce concentrated narrowband emissions. Its spread-spectrum CMOS output reaches up to 28 MHz and is generated from a clock or crystal reference through mixed analog and digital PLL circuitry. Placing the device at the timing origin allows the clock spectrum to be spread before it reaches switching logic, helping reduce clock-related conducted and radiated emissions. The 8-SOIC package supports compact surface-mount assembly, while the 1:1 input-to-output ratio simplifies clock-tree planning. Designers should verify output loading, reference-source requirements, decoupling, and the final emissions margin against the manufacturer application guidance.

🌐

Communication Interface Modules

The ICS180M-03 can supply the low-EMI system clock used by compact communication interface modules operating below 28 MHz. A spread-spectrum clock reduces the energy concentrated around one carrier, which can be valuable when a module contains fast digital edges and must meet strict internal emission limits. The part accepts either a clock or crystal source, giving a designer flexibility in the reference architecture. Its CMOS output and single-circuit configuration also keep the clock-generation stage compact. Use the manufacturer pin and layout guidance to route the reference input, supply, and output cleanly, and confirm that the selected module’s timing margin accommodates the device’s spread-spectrum characteristics.

🏭

Embedded Control Systems

The ICS180M-03 is suitable as the clock source for embedded control systems that operate from a 3.135 V to 5.5 V rail and require an output clock no higher than 28 MHz. The spread-spectrum output can reduce the peak spectral contribution of the system clock, while the 1:1 ratio supports straightforward reference selection. Because the device contains PLL circuitry, the stability and startup behavior of the selected crystal or clock source directly influence the generated output. Keep the timing path short, provide the connections required by the manufacturer datasheet, and validate startup and clock quality over the complete environmental range used by the equipment.

📟

Industrial Measurement Equipment

Industrial measurement equipment can use the ICS180M-03 to generate a low-EMI clock for control, capture, or communications sections. Spreading the clock spectrum may assist systems that combine digital processing with sensitive analog front ends, especially when reducing narrowband clock energy is a design priority. The ICS180M-03 operates from 3.135 V to 5.5 V and provides one CMOS clock output with a maximum frequency of 28 MHz. The 8-SOIC footprint allows placement near the clock-consuming circuitry to minimize trace length. Validate the clock’s contribution to the complete system spectrum and use the manufacturer’s recommended layout to prevent additional emissions from the reference and output routing.

📺

EMI-Controlled Consumer Electronics

The ICS180M-03 offers a compact timing solution for consumer electronics where a narrow clock spectrum could complicate electromagnetic-emissions testing. Its low-EMI spread-spectrum output operates up to 28 MHz and accepts either a crystal or external clock, allowing integration into appliances, controllers, or peripheral electronics with different reference arrangements. The single CMOS output and 8-SOIC surface-mount package support automated assembly and compact layouts. Keep decoupling and clock traces compact, and observe the manufacturer’s grounding and output-connection recommendations. Because the available product summary does not state the spread percentage or jitter limits, those characteristics should be confirmed from the datasheet before high-speed signal-path use.

🖥️

General-Purpose Clock Distribution

The ICS180M-03 can serve as the first low-EMI clock-generation stage in a small distribution network. Its 1:1 input-to-output ratio allows a 28 MHz reference to support the maximum listed output, while the CMOS output can feed compatible downstream buffer or distribution devices. This arrangement is useful when a system needs reduced narrowband clock energy without a programmable multi-output synthesizer. The 3.135 V to 5.5 V operating range supports common low-voltage rails, and the 8-SOIC package simplifies board integration. Confirm source and sink current requirements, clock-tree impedance, fan-out, and skew before adding downstream devices, using the manufacturer datasheet as the electrical authority.

What is the ICS180M-03?
The Renesas ICS180M-03 is a single-output spread-spectrum clock generator with a maximum frequency of 28 MHz. According to the manufacturer datasheet, it accepts a clock or crystal reference, uses mixed analog and digital PLL technology, and provides a CMOS output. Its low-EMI output spreading is intended to reduce narrowband clock emissions in sensitive digital systems.
What are the key specifications of ICS180M-03 that engineers should know?
The ICS180M-03 provides a maximum output frequency of 28 MHz, one clock-generating circuit, a 1:1 input-to-output ratio, and CMOS output logic. According to the manufacturer datasheet, the device accepts either a clock or crystal input and operates from 3.135 V to 5.5 V. It is offered in an 8-SOIC surface-mount package, with tube packaging identified in the product listing.
How does the ICS180M-03 reduce EMI?
The ICS180M-03 reduces EMI by generating a spread-spectrum clock rather than concentrating energy at one narrow clock frequency. According to the manufacturer datasheet, the device combines analog and digital PLL technology to create a low-EMI output clock. The actual spreading parameters and implementation limits should be confirmed in the manufacturer’s operating information before finalizing a spectrum-compliance design.
What is the operating voltage of ICS180M-03?
The ICS180M-03 operates from 3.135 V to 5.5 V. This supply range comes from the product specification for the device. The 3.135 V lower boundary provides limited headroom above 3 V, so a system should include adequate regulation and transient margin while keeping the supply within the manufacturer-defined operating range.
What clock inputs does ICS180M-03 support?
The ICS180M-03 supports either a clock input or a crystal input. According to the manufacturer datasheet, the selected reference is used by its analog and digital PLL circuitry to generate the low-EMI CMOS clock output. The source, amplitude, frequency, and stability requirements must match the manufacturer’s input recommendations for the chosen operating mode.
What is the output frequency of ICS180M-03?
The maximum output frequency of the ICS180M-03 is 28 MHz. The manufacturer specifies a 1:1 input-to-output frequency ratio, so a corresponding 28 MHz reference is required to obtain the maximum listed output frequency. Other operating frequencies, reference tolerances, and accuracy limits are not stated in the available product information and should be checked in the manufacturer datasheet.
Where can I download the ICS180M-03 datasheet PDF?
The ICS180M-03 datasheet PDF can be accessed through the Renesas document link on Octopart or through the Renesas PDF link on Alldatasheet. The manufacturer datasheet is the controlling document for pin assignments, electrical characteristics, spreading parameters, and recommended application circuits. Use the linked document to verify every parameter against the exact 8-SOIC ordering code.
Where can I find the ICS180M-03 pinout?
The ICS180M-03 pinout should be taken from the manufacturer datasheet because the available product summaries identify the device as an 8-SOIC but do not reproduce individual terminal assignments. Use the package drawing and pin-description table when assigning PCB nets, especially for the supply, ground, reference input, and clock output connections.
What package does ICS180M-03 use?
The ICS180M-03 uses an 8-SOIC surface-mount package with a stated width of 0.154 inch, or 3.90 mm. The product listing identifies tube as the shipping package. Because the body dimensions and land pattern are not fully reproduced in the product summary, use the package drawing in the manufacturer datasheet for final PCB footprint dimensions.
Where can I buy ICS180M-03 online?
The ICS180M-03 can be requested through the Request a Quote form on this page for current sourcing, stock confirmation, and order handling. The component is listed as an 8-SOIC spread-spectrum clock generator with tube packaging. Submit the exact MPN and required quantity so the quote can reflect the correct package and lead-time status.
What is the price of ICS180M-03?
Current ICS180M-03 pricing is not stated on this page because commercial terms may change with quantity, package configuration, and market conditions. Use the Request a Quote form on this page to request a current quotation for the exact 8-SOIC ordering code and required quantity. The form provides the appropriate path for obtaining an actionable purchasing response.
What is the lead time for ICS180M-03?
The current lead time for ICS180M-03 should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, manufacturing availability, and packaging requirements. Include the required tube quantity and target schedule in the request so procurement can provide a current commitment rather than a historical availability estimate.
Is ICS180M-03 in stock?
ICS180M-03 availability should be confirmed through the Request a Quote form on this page. The component is actively offered as an 8-SOIC clock generator and is associated with tube packaging, but a current quantity commitment must be established for the requested order. Submit the exact MPN and required quantity to obtain an up-to-date supply response.
When should I choose ICS180M-03 for a clock-generation design?
Choose the ICS180M-03 when the design needs a single low-EMI CMOS clock of up to 28 MHz generated from a clock or crystal reference. According to the manufacturer datasheet, its analog and digital PLL implementation supports low-EMI operation, while the 1:1 input-to-output ratio simplifies clock reference design. It is less appropriate when multiple outputs, programmable frequencies, or a non-SOIC footprint are required.
Is ICS180M-03 suitable for EMI-sensitive embedded systems?
The ICS180M-03 is suitable for EMI-sensitive embedded systems that can operate within its 28 MHz maximum output frequency and 3.135 V to 5.5 V supply range. Its spread-spectrum CMOS output is specifically intended to reduce narrowband clock emissions. Final suitability depends on the system clock topology, required reference source, output loading, and applicable emissions target.
What drop-in replacement can replace ICS180M-03?
No verified drop-in replacement for ICS180M-03 is established on this page. A valid substitute must match the 8-SOIC footprint, pin assignments, clock or crystal input arrangement, 1:1 frequency relationship, CMOS output, 28 MHz maximum frequency, and 3.135 V to 5.5 V supply range. Do not approve a candidate based only on the shared package; verify every pin and timing parameter against the manufacturer datasheets.
What is the best Renesas equivalent for ICS180M-03?
No Renesas-equivalent MPN is verified as a drop-in replacement for the ICS180M-03 in the available cross-reference information. The target uses an 8-SOIC package, a clock or crystal input, a 1:1 input-to-output ratio, CMOS output, and a maximum frequency of 28 MHz. Any proposed alternative must be checked for identical pinout, electrical limits, spread-spectrum behavior, and lifecycle status before substitution.

کے لیے انجینئرنگ ریفرنس ڈیٹا ICS180M-03 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the ICS180M-03 when a design needs a single low-EMI CMOS clock up to 28 MHz and can use an 8-SOIC footprint. It is particularly relevant when a clock or crystal reference is available, a 1:1 input-to-output ratio is acceptable, and the supply operates from 3.135 V to 5.5 V. Its mixed analog and digital PLL implementation supports spread-spectrum clock generation for emissions-sensitive equipment. The device is less suitable for applications requiring multiple clock outputs, programmable frequency synthesis, operation above 28 MHz, or a package other than 8-SOIC. No verified drop-in alternative is established, so any proposed substitute should be selected only after its pin assignments, spread-spectrum behavior, electrical limits, and clock characteristics have been compared directly with the manufacturer datasheets.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ
Brand Renesas Electronics
Package 8-SOIC
Product Type Spread Spectrum Clock Generator
Maximum Output Frequency 28 MHz
Supply Voltage Range 3.135 V to 5.5 V
Input Type Clock or crystal
Output Type CMOS
Input-to-Output Ratio 1:1
Number of Circuits 1 circuit
PLL Yes

ڈیزائن نوٹس

Use the manufacturer pin-description table and package drawing to assign the supply, ground, reference-input, and CMOS-output connections. Place the required bypass capacitors close to their associated pins, and keep the reference and clock-output traces short. The 8-SOIC package is small enough that pin-assignment mistakes or long return paths can materially degrade clock quality and EMI performance.

Treat the crystal or external clock as the reference for the PLL-based output and follow the manufacturer’s stability and component recommendations. If an external clock is used, verify its amplitude, frequency, and jitter against the input requirements. When a crystal is used, observe the specified load capacitance and startup layout because incorrect loading can prevent reliable oscillation or produce an unstable clock.

The low-EMI spread-spectrum feature should be considered at the PCB level rather than used as a substitute for good layout. Keep the reference oscillator loop compact, return noisy switching currents directly to ground, and avoid routing the sensitive clock across split planes. Confirm the completed design with emission measurements because clock harmonics and PCB structures can create emissions that are not represented by the fundamental 28 MHz output specification.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

Compliance declarations are not stated in the available product information. Confirm the current material and environmental declarations with Renesas before using the part in regulated equipment.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-11 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

ICS180M-03 datasheet ICS180M-03 datasheet pdf ICS180M-03 pinout ICS180M-03 equivalent ICS180M-03 replacement ICS180M-03 cross reference Renesas ICS180M-03 ICS180M-03 28MHz clock generator ICS180M-03 8-SOIC footprint ICS180M-03 application circuit ICS180M-03 price ICS180M-03 stock

متعلقہ اجزاء اور اصطلاحات

Renesas Electronics ICS180M-03 Renesas Electronics America Integrated Circuit Systems spread-spectrum clock generator clock generator phase-locked loop PLL low-EMI clock CMOS output 28 MHz clock clock and timing IC frequency synthesizer 8-SOIC SOIC family surface-mount package crystal oscillator electromagnetic interference clock distribution digital control system communication interface industrial measurement equipment 3.135 V to 5.5 V supply
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں