Texas Instruments

INA146UAG4 - High-Voltage Programmable Gain Difference Amplifier | Texas Instruments

N.º da peça: INA146UAG4 ✓ Ativo
Single or dual supply; exact limits not stated in the verified listings Vdss 8-SOIC, 0.154 inch body width, 3.90 mm width Package 550 kHz gain-bandwidth product Speed
MOQ: 1 |

INA146UAG4 Visão geral

The Texas Instruments INA146UAG4 is a high-voltage, programmable-gain difference amplifier with a 550 kHz gain-bandwidth product in an 8-SOIC package. It is designed to accurately attenuate high differential voltages and reject high common-mode voltages when interfacing high-level signals to lower-voltage signal-processing circuits. The device is particularly useful where the input common-mode range extends beyond the supply rails and where input protection against high-voltage signals is required.

A difference amplifier is an amplifier topology that responds to the voltage difference between its differential inputs while rejecting signals common to both inputs. This common-mode rejection improves signal integrity in industrial measurement, sensor-interface, and high-voltage feedback systems. The INA146 belongs to the instrumentation-amplifier and operational-amplifier hierarchy, where precision gain control, low distortion, and accurate differential sensing are primary design considerations.

Key features include programmable gain, high-voltage input handling, a differential input configuration, and operation from a single supply or dual-supply arrangement. The 550 kHz bandwidth supports applications requiring accurate signal amplification without the bandwidth limits of much slower precision instrumentation amplifiers. The INA146UAG4 is identified in distributor listings as a one-circuit differential amplifier in an 8-SOIC package.

The device is used in applications including high-voltage sensor measurement, current-shunt monitoring, industrial process control, data-acquisition systems, and precision analog signal conditioning. Its differential architecture helps reduce errors caused by common-mode noise and ground-potential differences when the measured signal is referenced to a noisy or elevated source.

When designing a circuit around the INA146UAG4, verify the absolute maximum differential and common-mode input voltages, supply limits, gain-resistor network, output swing, and stability requirements in the manufacturer datasheet. Place the gain-setting network and input components close to the device, and use careful routing to minimize parasitic capacitance and noise pickup around the high-impedance amplifier inputs.

Alternativas drop-in para INA146UAG4 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com INA146UAG4 (mesmo formato e footprint) — diferindo em Package, Product Type, Gain Configuration, Input Protection.

Texas Instruments
Package: 8-pin SOIC (D), 3.9 mm nominal width
Product Type: Precision high-voltage programmable-gain difference amplifier (1 circuit)
Gain Configuration: Set with external resistors
Comparar com INA146UAG4 →
Texas Instruments
Package: 8-pin SOIC
Product Type: Precision unity-gain difference amplifier
Comparar com INA146UAG4 →

INA146UA

✅ Drop-In
Texas Instruments
📦 8-SOIC
Precision high-voltage programmable-gain difference amplifier (1 circuit) · 100 V/V · Set with external resistors · 550 kHz · 5 mV · ±15 V · 4.5 V to 36 V · ±2.25 V to ±18 V

Consulte o preço

Ver ficha técnica →

INA148UA

✅ Drop-In
Texas Instruments
📦 8-SOIC
Precision unity-gain difference amplifier · ±200 V · 1 · 100 kHz · 1 V/µs · 5 mV · 70 dB · 2.7 V

Consulte o preço

Ver ficha técnica →

INA146UAG4 Classificações máximas e características elétricas

Product Type High-Voltage Programmable Gain Difference Amplifier
Amplifier Type Differential amplifier
Number of Circuits 1 circuit
Gain-Bandwidth Product 550 kHz
Encapsulamento 8-SOIC, 0.154 inch body width, 3.90 mm width
Supply Type Single or dual supply; exact limits not stated in the verified listings
Input Type Differential input
Common-Mode Range Extends beyond both supply rails
Input Protection High-voltage capability provides inherent input protection
Tipo de saída Single-ended output
Gain Configuration Programmable gain using an external gain-setting resistor
Operating Frequency 550 kHz gain-bandwidth product

Configuração de pinos do INA146UAG4

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pino 1 RG — Gain-setting resistor connection
Pino 2 IN- — Inverting differential input
Pino 3 IN+ — Non-inverting differential input
Pino 4 VS- — Negative supply connection
Pino 5 REF — Reference connection for output and gain configuration
Pino 6 OUT — Single-ended amplifier output
Pino 7 VS+ — Positive supply connection
Pino 8 RG — Gain-setting resistor connection

Aplicações típicas

INA146UAG4 é adequado para 6 aplicaçãos: High-Voltage Sensor Interface, Shunt-Based Current Measurement, Industrial Process Control, Data-Acquisition Front End, Bridge and Transducer Measurement, Power and Motor Feedback Monitoring.

🏭

High-Voltage Sensor Interface

The INA146UAG4 suits sensor front ends that produce a differential signal riding on a substantial common-mode voltage. Its difference-amplifier architecture rejects common-mode error, while the input common-mode range extending beyond both supply rails allows the input stage to operate with elevated signal levels. Place the amplifier close to the sensor leads, use a differential return path, and verify the maximum differential input voltage against the sensor transients. Program the gain with the resistor network specified in the INA146 datasheet and add filtering where sensor noise dominates.

⚡

Shunt-Based Current Measurement

The INA146UAG4 can amplify the small differential voltage produced by a current shunt while rejecting the common-mode voltage present on the shunt terminals. The 550 kHz gain-bandwidth product provides useful bandwidth for many industrial and control loops, and the high-voltage capability reduces the need for aggressive input attenuation. Place the shunt close to the amplifier input pins, use paired routing for the differential pair, and check Kelvin connections so trace resistance does not create an offset error.

🏭

Industrial Process Control

In process-control systems, the INA146UAG4 is useful for conditioning a differential measurement from pressure, temperature, or current transducers. The device combines programmable gain with common-mode rejection, helping preserve the small signal of interest when the transducer is referenced to an elevated or noisy ground. Choose the external gain network and input filtering together, because the bandwidth and phase margin of the complete measurement chain determine loop stability. Verify supply headroom and output swing against the downstream controller input.

🖥️

Data-Acquisition Front End

The INA146UAG4 can serve as the first analog stage of a data-acquisition front end when the source is differential and the common-mode level is high. Its programmable-gain architecture allows the same analog section to cover multiple measurement ranges, while the 550 kHz bandwidth supports moderate-rate acquisition rather than only static instrumentation. Keep the differential pair short and matched, reference the shield or guard structure to the measurement return, and confirm that the programmed gain leaves sufficient bandwidth for the sampling rate.

📊

Bridge and Transducer Measurement

The INA146UAG4 is appropriate for bridge or resistive-transducer measurements where the useful output is differential and the bridge excitation creates a substantial common-mode level. Programmable gain allows the amplifier to scale the bridge output while the difference-amplifier function suppresses excitation-related common-mode voltage. Use the manufacturer-specified gain resistor and reference arrangement, and evaluate offset and drift at the intended gain rather than assuming the highest programmable gain is best. Thermal gradients across the bridge and input board can dominate the final accuracy.

⚡

Power and Motor Feedback Monitoring

The INA146UAG4 can monitor feedback signals in power-conversion and motor-control systems where a small differential voltage appears across a shunt or sense element. Its common-mode handling and differential topology help preserve measurement accuracy in electrically noisy environments, and the 550 kHz bandwidth supports faster feedback loops than a slow precision-only amplifier. Keep the sense-path components close to the device, avoid sharing return traces with switching current, and validate the amplifier against the switching node’s full transient amplitude.

What is the INA146UAG4 used for?
The INA146UAG4 is a high-voltage, programmable-gain difference amplifier used to measure a differential signal while rejecting common-mode voltage. According to the Texas Instruments INA146 datasheet, the device can attenuate high differential voltages and reject high common-mode voltages for compatibility with common signal-processing levels. Its 550 kHz gain-bandwidth product makes it useful for sensor interfaces, industrial measurement, shunt monitoring, and analog signal conditioning.
What is the INA146UAG4 gain bandwidth?
The INA146UAG4 has a gain-bandwidth product of 550 kHz, as identified in the verified component listings for INA146UAG4. The Texas Instruments INA146 product page describes it as a high-voltage, programmable-gain difference amplifier. Actual signal bandwidth depends on the selected closed-loop gain, slew rate, output loading, and the stability configuration specified in the manufacturer datasheet.
Can the INA146UAG4 accept input signals above the supply rails?
Yes. The Texas Instruments INA146 datasheet states that the input common-mode range extends beyond both supply rails, which allows the amplifier to reject common-mode voltage that is higher or lower than the supply limits. This feature is useful in high-side sensing and industrial circuits, but the absolute maximum input and differential ratings must still be checked before applying a signal.
Is the INA146UAG4 a single-channel amplifier?
The INA146UAG4 is a one-circuit differential amplifier in an 8-SOIC package. Distributor listings identify the device as “Differential Amplifier 1 Circuit 8-SOIC” and describe the INA146 as a precision difference amplifier. One internal amplifier channel is provided, so multiple independent differential channels require multiple packaged devices.
Where can I download the INA146UAG4 datasheet PDF?
The official manufacturer datasheet is available from the Texas Instruments INA146 page at https://www.ti.com/lit/ds/symlink/ina146.pdf. The PDF contains the pin description table, gain-setting guidance, input and output ratings, common-mode behavior, and recommended application circuits. Use the pin-description table in the manufacturer datasheet when assigning PCB tracks.
What is the INA146UAG4 pinout?
The INA146UAG4 uses an 8-SOIC pin arrangement with differential inputs, power connections, output, reference, and gain-resistor connections. The exact pin descriptions are in the Texas Instruments INA146 datasheet, and the package drawing should be matched against the symbol before layout release. Do not assign PCB tracks solely from a generic SOIC outline because the gain and reference pins determine the external resistor network.
How is the INA146UAG4 gain programmed?
The INA146UAG4 is a programmable-gain difference amplifier, with gain set by an external resistor network connected to the gain-control pins. The Texas Instruments INA146 datasheet provides the gain equation and recommended resistor values. Use the published network values to preserve the intended gain accuracy and bandwidth, and check the resistor tolerance and temperature coefficient during error budgeting.
Is INA146UA a drop-in replacement for INA146UAG4?
The INA146UA is the closest listed same-family option for the INA146UAG4, and both are associated with the INA146UA ordering family in the verified comparison listings. The INA146UAG4 is specified in an 8-SOIC package, while the exact suffix, temperature grade, and orderable details for INA146UA must be confirmed against the manufacturer datasheet before treating it as a drop-in replacement.
What is the best replacement for INA146UAG4?
The INA146UA is the most direct replacement candidate identified for the INA146UAG4 because it belongs to the same INA146 family, while INA148UA is a related high-voltage difference-amplifier alternative. Neither replacement should be treated as automatically interchangeable without checking supply voltage, common-mode range, maximum differential input, gain-network requirements, package, and temperature grade against the INA146UAG4 datasheet.
When should I choose INA146UAG4 instead of a general-purpose op amp?
Choose the INA146UAG4 when the measurement requires high common-mode rejection, a differential input, and the ability to operate with an input common-mode range beyond the supply rails. A general-purpose operational amplifier may be adequate for low-level single-ended sensing, but it usually does not provide the same integrated difference-amplifier function and high-voltage input handling. Confirm bandwidth and gain against the signal source.
What is the difference between INA146UAG4 and INA148UA?
The INA148UA is a related high-voltage difference-amplifier family, but it is not established by the verified listings as an exact drop-in replacement for the INA146UAG4. The comparison must account for supply voltage, input common-mode range, maximum differential voltage, gain-setting network, output swing, bandwidth, and package pin function. Use the manufacturer datasheets for each part before changing the PCB or resistor values.
Is INA146UAG4 suitable for industrial sensor measurement?
Yes, the INA146UAG4 is well suited to industrial sensor and process-measurement interfaces because it combines a differential input, programmable gain, high common-mode rejection capability, and an input common-mode range extending beyond the supply rails. The Texas Instruments product description specifically identifies high common-mode rejection and high-voltage handling as core features. Add filtering and input protection appropriate to the sensor and grounding environment.
Does the INA146UAG4 require a heatsink?
The INA146UAG4 is a precision difference amplifier in an 8-SOIC package, and its thermal requirement depends on supply voltage, output current, dissipation, ambient temperature, and PCB copper area. The verified listings do not state a complete thermal-resistance specification, so use the package thermal data in the manufacturer datasheet and calculate junction temperature before deciding whether copper spreading or additional cooling is required.
How should I protect the INA146UAG4 inputs in a high-voltage circuit?
Use the INA146UAG4 only within the absolute maximum input ratings listed in the Texas Instruments datasheet, and add series input resistance plus appropriate clamping or protection components when the source can exceed those ratings. Keep the protection network close to the amplifier pins and account for its capacitance, leakage, and added noise. A differential input also requires careful return-path routing to preserve common-mode rejection.
Where can I request a quote for INA146UAG4?
Use the Request a Quote form on this XAIPART product page to request current commercial terms for INA146UAG4. The verified distributor results confirm the Texas Instruments 8-SOIC device, but current lead time, stock, and project-specific pricing should be confirmed through the quote process. The form also allows you to specify quantity, target date, and packaging requirements.

Dados de referência de engenharia para INA146UAG4 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the INA146UAG4 when the input is differential, the common-mode level can extend beyond the supply rails, and the measurement needs programmable gain in a compact 8-SOIC footprint. Choose INA146UA when it is the correct orderable suffix of the INA146 family and its temperature grade, supply ratings, and gain-network details meet the design requirements. Consider INA148UA only after confirming its maximum differential input voltage, common-mode range, gain-setting method, and output swing against the INA146UAG4 datasheet. For applications where common-mode rejection is not important and the input is single-ended, a general-purpose amplifier may be simpler. Before releasing a PCB, compare the manufacturer pin descriptions, reference configuration, and external resistor network; a shared SOIC outline alone does not guarantee functional interchangeability.

Comparação com alternativas

Parâmetro Este produto INA146UA INA148UA
Brand Texas Instruments Texas Instruments Texas Instruments
Package 8-SOIC 8-SOIC 8-SOIC
Amplifier Type Differential amplifier High-voltage programmable-gain difference amplifier High-voltage difference amplifier

Principais diferenciais

  • Differential high-voltage measurement with programmable gain (vs INA146UA)
  • Input common-mode range extends beyond the supply rails (vs INA148UA)
  • Eight-pin SOIC implementation with single-ended output (vs INA146UA)

Notas de projeto

Route IN+ and IN- as a tightly matched differential pair, keep the pair short, and connect the two input returns to the same measurement reference. Place the gain-setting resistor close to the RG pins and keep the REF connection short and quiet. Traces that run alongside switching nodes or high-current power paths can degrade common-mode rejection and create errors that are difficult to distinguish from amplifier offset.

Do not treat the extended input common-mode range as permission to exceed the absolute maximum differential input rating. Check transient voltage during connector insertion, inductive load switching, and sensor faults. Series input resistance can limit fault current, but it also interacts with amplifier input capacitance; select protection components that preserve the intended bandwidth and do not introduce excessive leakage.

Use the resistor values and gain configuration shown in the manufacturer datasheet, and calculate the closed-loop bandwidth at the selected gain rather than assuming the full 550 kHz gain-bandwidth product is available at every gain setting. Add filtering at the input when needed, but place capacitors symmetrically or otherwise account for their tolerance so differential signals remain balanced.

Estimate amplifier dissipation from the actual supply voltage, output voltage, and output current, then add that dissipation to the junction-temperature calculation. The verified listings do not provide a complete thermal-resistance value for this exact orderable, so use the package thermal data in the Texas Instruments datasheet and the final PCB copper area. Do not use the distributor package description as a substitute for thermal specifications.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The verified listings identify the INA146UAG4 as a Texas Instruments 8-SOIC differential amplifier but do not provide the detailed RoHS, REACH, halogen-free, lead-free, or conflict-minerals declarations. Confirm the orderable’s compliance documents with the manufacturer.

Dados verificados em: 2026-11-14 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

INA146UAG4 datasheet INA146UAG4 pinout INA146UAG4 8-SOIC INA146UAG4 550 kHz INA146UAG4 high voltage amplifier INA146UAG4 programmable gain INA146UAG4 replacement INA146UAG4 equivalent INA146UAG4 vs INA146UA INA146UAG4 vs INA148UA INA146UAG4 sensor interface INA146UAG4 current shunt amplifier Texas Instruments INA146UAG4 INA146UAG4 price INA146UAG4 stock

Componentes & termos relacionados

Texas Instruments INA146UAG4 INA146UA INA148UA difference amplifier high-voltage programmable-gain difference amplifier operational amplifier instrumentation amplifier programmable gain differential input common-mode rejection common-mode range gain-bandwidth product 550 kHz 8-SOIC Texas Instruments INA146 datasheet high-side sensing current-shunt monitoring industrial process control data acquisition bridge measurement RoHS REACH AEC-Q100 input protection
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ