INA1650IPWR - 91dB CMRR Dual Audio Receiver | TI
N.º da peça: INA1650IPWR ✓ AtivoINA1650IPWR Visão geral
A differential audio line receiver is an interface IC that extracts the wanted signal from a pair of conductors while rejecting voltage common to both inputs. It belongs to the receiver path in a broader signal-chain hierarchy of audio source, balanced line interface, converter, amplification, and loudspeaker stages. Precision matching of the integrated resistors helps preserve the audio signal when substantial unwanted voltage is present on both input lines.
The INA1650 provides two receiver channels, allowing one device to handle a stereo balanced audio connection. Its headline performance is 91 dB CMRR, which improves rejection of common-mode interference, and -120 dB THD+N under the stated 1 kHz, 22-dBu test condition. These figures make the device relevant to professional audio, industrial audio, and other balanced-line systems where low distortion and noise immunity are important.
Its wide 4.5 V to 36 V supply range accommodates conventional analog audio rails as well as higher-voltage industrial interfaces. The operating-temperature range extends from -40 °C to +125 °C, supporting applications across consumer, industrial, and temperature-controlled equipment. The 14-pin TSSOP package also has a small board footprint while remaining compatible with standard surface-mount assembly methods.
Typical uses include stereo balanced-line input stages, professional mixing equipment, studio monitor interfaces, industrial audio links, and instrumentation that receives differential signals through long cables. Because the receiver rejects common-mode voltage rather than improving it at the source, it should be paired with properly shielded or twisted-pair wiring and a low-impedance reference for the opposite input.
A key implementation consideration is input and reference arrangement. The manufacturer datasheet should be used to assign each of the 14 pins, connect the signal and reference returns, decouple the supply, and preserve the recommended input network. PCB layout should keep sensitive audio traces away from switching nodes and high-current return paths so that the receiver's intrinsic 91 dB CMRR is not undermined by board-level coupling.
This product record combines manufacturer specifications, package information, sourcing fields, and application-focused engineering guidance. It also distinguishes verified drop-in replacements from functionally related receiver or current-measurement devices, helping engineers avoid selecting a same-size package that is not actually pin-compatible.
Alternativas drop-in para INA1650IPWR — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Nenhuma alternativa drop-in disponível para este produto.
Solicitar alternativasINA1650IPWR Especificações
| Number of Channels | 2 channels |
| Common-Mode Rejection Ratio | 91 dB |
| Total Harmonic Distortion Plus Noise | -120 dB at 1 kHz and 22 dBu |
| Supply Voltage Range | 4.5 V to 36 V |
| Faixa de temperatura de operação | -40 °C to +125 °C |
| Encapsulamento | 14-pin TSSOP (PW) |
| Package Body Width | 4.40 mm |
| Package Body Length | 0.173 inch |
| Signal Type | Differential line receiver |
| Technology | SoundPlus high-CMRR receiver |
| Moisture Sensitivity Level | MSL 2 at 260 °C for 1 year |
| Status RoHS | Compliant |
Guia de Configuração de Pinos do INA1650IPWR 0.173 inch
Configuração de pinos para INA1650IPWR (pacote 0.173 inch). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.
Nenhum dado detalhado de pinagem disponível para INA1650IPWR.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
INA1650IPWR é adequado para 6 aplicaçãos: Stereo Balanced Audio Input, Professional Mixing Console Interface, Studio Monitor Interface, Industrial Audio Link, Balanced Instrumentation Input, Broadcast and Installed-Sound Receiver.
Stereo Balanced Audio Input
The Texas Instruments INA1650IPWR fits stereo balanced-line receivers because it integrates two differential channels in one 14-pin TSSOP package. Its 91 dB CMRR helps reject hum and other voltage common to both conductors, while -120 dB THD+N at 1 kHz and 22 dBu limits distortion during nominal signal reception. Place each channel near its input connector, route the pair as a twisted pair, and use the manufacturer input network to establish the proper reference condition. The device's 4.5 V to 36 V supply range provides flexibility for centralized analog rails, although local decoupling remains necessary to preserve low-noise operation.
Recomendado
Professional Mixing Console Interface
INA1650IPWR is appropriate for a professional mixing-console input stage requiring two balanced channels per device. Its 91 dB CMRR helps prevent console ground potential differences and surrounding electrical noise from appearing directly in the recovered audio signal. The -120 dB THD+N condition at 1 kHz and 22 dBu provides low added distortion for line-level signals. Engineers should keep connector, protection, and input networks close to the receiver, maintain a continuous return reference, and isolate sensitive traces from switching power stages. Two devices can provide a four-channel input without changing the core receiver architecture.
Recomendado
Studio Monitor Interface
The INA1650IPWR can form the balanced receive stage of a studio monitor interface, where preserving the integrity of a 22-dBu audio signal is important. Its two channels reduce component count for stereo monitoring, and its specified -120 dB THD+N at 1 kHz avoids adding substantial distortion at the test condition. The 91 dB CMRR is particularly useful when the monitor receives signals through cable runs exposed to industrial ground currents. Use shielded or twisted-pair cabling, maintain a low-impedance reference return, and place the input and supply bypass capacitors close to their associated device pins according to the manufacturer layout guidance.
Recomendado
Industrial Audio Link
INA1650IPWR fits industrial audio equipment that receives balanced signals over cables passing near motors, switching supplies, or long ground paths. Its 91 dB common-mode rejection reduces the conversion of common-mode industrial noise into differential output, while the -120 dB THD+N specification supports clean line-level reception. The -40 °C to +125 °C operating range supports temperature-varied industrial deployments, and the 4.5 V to 36 V range accommodates several analog supply architectures. For best results, use twisted-pair wiring, maintain a deliberate reference-ground strategy, and keep the receiver away from high-current switching paths.
Recomendado
Balanced Instrumentation Input
The INA1650IPWR can receive low-frequency differential instrumentation signals when the source represents information as a differential voltage around a balanced reference. The 91 dB CMRR helps reject process-related common-mode voltage, while the dual-channel architecture supports paired measurements without duplicating the receiver package. Its -120 dB THD+N rating at 1 kHz and 22 dBu demonstrates low added distortion under the stated audio-domain test condition. Confirm the required gain, input impedance, usable bandwidth, and reference-return arrangement from the manufacturer data before using it outside audio. PCB symmetry and controlled grounding are important because mismatched signal and return paths can degrade common-mode rejection.
Recomendado
Broadcast and Installed-Sound Receiver
INA1650IPWR is suitable for broadcast or installed-sound equipment that accepts balanced stereo program-line signals. Its integrated dual receiver reduces the number of active packages needed for a stereo input, while 91 dB CMRR provides useful immunity to common-mode voltage encountered in larger installations. The receiver's -120 dB THD+N at 1 kHz and 22 dBu supports low-distortion program paths, and the 14-pin TSSOP package simplifies conventional surface-mount assembly. Pair the receiver with correctly shielded connectors and a stable reference network. Avoid relying on CMRR as a substitute for proper grounding or cable treatment, since installation faults can create differential interference that common-mode rejection cannot remove.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para INA1650IPWR — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto |
|---|---|
| Brand | Texas Instruments |
| Package | 14-pin TSSOP (PW) |
| Channel Count | 2 channels |
| Common-Mode Rejection Ratio | 91 dB |
| THD+N | -120 dB at 1 kHz and 22 dBu |
| Supply Voltage Range | 4.5 V to 36 V |
| Operating Temperature Range | -40 °C to +125 °C |
| Signal Function | Dual differential audio line receiver |
Notas de projeto
Route each balanced input as a tightly coupled pair with a continuous ground reference, and keep the two channels geometrically similar where they share connector or reference structures. Although the INA1650 provides 91 dB CMRR, unbalanced traces, broken return paths, or mismatched connectors can introduce differential noise that common-mode rejection cannot correct. Place protection and input-network components close to the package pins and avoid routing audio nets beneath switching-power regions.
Use the manufacturer-specified bypass capacitance and place it immediately across the supply and ground pins. The receiver supports a 4.5 V to 36 V supply range, but that wide operating range does not eliminate the need for local decoupling. Keep the supply loop short, provide a low-impedance return, and isolate analog input traces from inductors, power converters, and high-speed digital switching nodes.
Establish the input and reference connections directly from the INA1650 pin-description table. A balanced input requires the correct signal and opposite-input or reference arrangement; connecting both inputs as ordinary single-ended signals can invalidate the expected 91 dB CMRR behavior. Validate the assembled board with a common-mode injection test and observe output distortion at the application's operating signal level, using the -120 dB THD+N value as a datasheet condition rather than a guaranteed result for every board.
Informações de conformidade
RoHS compliance is identified for INA1650IPWR. REACH status is listed without a definitive conclusion, and no specific AEC-Q100 qualification, lead-free statement, halogen-free statement, or conflict-minerals declaration was established for this orderable part.