Texas Instruments

INA1650IPWR - 91dB CMRR Dual Audio Receiver | TI

MPN: INA1650IPWR ✓ Hoạt động
4.5 V to 36 V Vdss 14-pin TSSOP (PW) Package
MOQ: 1 |

INA1650IPWR Tóm tắt

The Texas Instruments INA1650IPWR is a dual-channel differential audio line receiver with 91 dB common-mode rejection ratio, -120 dB total harmonic distortion plus noise at 1 kHz for 22-dBu signals, and operation from 4.5 V to 36 V. It is packaged in a 14-pin TSSOP (PW) package for industrial surface-mount assemblies.

A differential audio line receiver is an interface IC that extracts the wanted signal from a pair of conductors while rejecting voltage common to both inputs. It belongs to the receiver path in a broader signal-chain hierarchy of audio source, balanced line interface, converter, amplification, and loudspeaker stages. Precision matching of the integrated resistors helps preserve the audio signal when substantial unwanted voltage is present on both input lines.

The INA1650 provides two receiver channels, allowing one device to handle a stereo balanced audio connection. Its headline performance is 91 dB CMRR, which improves rejection of common-mode interference, and -120 dB THD+N under the stated 1 kHz, 22-dBu test condition. These figures make the device relevant to professional audio, industrial audio, and other balanced-line systems where low distortion and noise immunity are important.

Its wide 4.5 V to 36 V supply range accommodates conventional analog audio rails as well as higher-voltage industrial interfaces. The operating-temperature range extends from -40 °C to +125 °C, supporting applications across consumer, industrial, and temperature-controlled equipment. The 14-pin TSSOP package also has a small board footprint while remaining compatible with standard surface-mount assembly methods.

Typical uses include stereo balanced-line input stages, professional mixing equipment, studio monitor interfaces, industrial audio links, and instrumentation that receives differential signals through long cables. Because the receiver rejects common-mode voltage rather than improving it at the source, it should be paired with properly shielded or twisted-pair wiring and a low-impedance reference for the opposite input.

A key implementation consideration is input and reference arrangement. The manufacturer datasheet should be used to assign each of the 14 pins, connect the signal and reference returns, decouple the supply, and preserve the recommended input network. PCB layout should keep sensitive audio traces away from switching nodes and high-current return paths so that the receiver's intrinsic 91 dB CMRR is not undermined by board-level coupling.

This product record combines manufacturer specifications, package information, sourcing fields, and application-focused engineering guidance. It also distinguishes verified drop-in replacements from functionally related receiver or current-measurement devices, helping engineers avoid selecting a same-size package that is not actually pin-compatible.

Bộ thay thế dễ dàng lắp đặt cho INA1650IPWR — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.

Yêu cầu các bộ thay thế

INA1650IPWR Thông số kỹ thuật

Number of Channels 2 channels
Common-Mode Rejection Ratio 91 dB
Total Harmonic Distortion Plus Noise -120 dB at 1 kHz and 22 dBu
Supply Voltage Range 4.5 V to 36 V
Khoảng nhiệt độ hoạt động -40 °C to +125 °C
Hộp 14-pin TSSOP (PW)
Package Body Width 4.40 mm
Package Body Length 0.173 inch
Signal Type Differential line receiver
Technology SoundPlus high-CMRR receiver
Moisture Sensitivity Level MSL 2 at 260 °C for 1 year
Trạng thái RoHS Compliant

Hướng dẫn cấu hình chân INA1650IPWR 0.173 inch

Cấu hình chân cho INA1650IPWR (0.173 inch gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.

Bảng cấu hình chân 0.173 inch cho INA1650IPWR

Không có dữ liệu chân cụ thể sẵn có cho INA1650IPWR.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

INA1650IPWR phù hợp cho 6 Áp dụngs: Stereo Balanced Audio Input, Professional Mixing Console Interface, Studio Monitor Interface, Industrial Audio Link, Balanced Instrumentation Input, Broadcast and Installed-Sound Receiver.

🎧

Stereo Balanced Audio Input

The Texas Instruments INA1650IPWR fits stereo balanced-line receivers because it integrates two differential channels in one 14-pin TSSOP package. Its 91 dB CMRR helps reject hum and other voltage common to both conductors, while -120 dB THD+N at 1 kHz and 22 dBu limits distortion during nominal signal reception. Place each channel near its input connector, route the pair as a twisted pair, and use the manufacturer input network to establish the proper reference condition. The device's 4.5 V to 36 V supply range provides flexibility for centralized analog rails, although local decoupling remains necessary to preserve low-noise operation.

🎛️

Professional Mixing Console Interface

INA1650IPWR is appropriate for a professional mixing-console input stage requiring two balanced channels per device. Its 91 dB CMRR helps prevent console ground potential differences and surrounding electrical noise from appearing directly in the recovered audio signal. The -120 dB THD+N condition at 1 kHz and 22 dBu provides low added distortion for line-level signals. Engineers should keep connector, protection, and input networks close to the receiver, maintain a continuous return reference, and isolate sensitive traces from switching power stages. Two devices can provide a four-channel input without changing the core receiver architecture.

🎧

Studio Monitor Interface

The INA1650IPWR can form the balanced receive stage of a studio monitor interface, where preserving the integrity of a 22-dBu audio signal is important. Its two channels reduce component count for stereo monitoring, and its specified -120 dB THD+N at 1 kHz avoids adding substantial distortion at the test condition. The 91 dB CMRR is particularly useful when the monitor receives signals through cable runs exposed to industrial ground currents. Use shielded or twisted-pair cabling, maintain a low-impedance reference return, and place the input and supply bypass capacitors close to their associated device pins according to the manufacturer layout guidance.

🏭

Industrial Audio Link

INA1650IPWR fits industrial audio equipment that receives balanced signals over cables passing near motors, switching supplies, or long ground paths. Its 91 dB common-mode rejection reduces the conversion of common-mode industrial noise into differential output, while the -120 dB THD+N specification supports clean line-level reception. The -40 °C to +125 °C operating range supports temperature-varied industrial deployments, and the 4.5 V to 36 V range accommodates several analog supply architectures. For best results, use twisted-pair wiring, maintain a deliberate reference-ground strategy, and keep the receiver away from high-current switching paths.

📟

Balanced Instrumentation Input

The INA1650IPWR can receive low-frequency differential instrumentation signals when the source represents information as a differential voltage around a balanced reference. The 91 dB CMRR helps reject process-related common-mode voltage, while the dual-channel architecture supports paired measurements without duplicating the receiver package. Its -120 dB THD+N rating at 1 kHz and 22 dBu demonstrates low added distortion under the stated audio-domain test condition. Confirm the required gain, input impedance, usable bandwidth, and reference-return arrangement from the manufacturer data before using it outside audio. PCB symmetry and controlled grounding are important because mismatched signal and return paths can degrade common-mode rejection.

📻

Broadcast and Installed-Sound Receiver

INA1650IPWR is suitable for broadcast or installed-sound equipment that accepts balanced stereo program-line signals. Its integrated dual receiver reduces the number of active packages needed for a stereo input, while 91 dB CMRR provides useful immunity to common-mode voltage encountered in larger installations. The receiver's -120 dB THD+N at 1 kHz and 22 dBu supports low-distortion program paths, and the 14-pin TSSOP package simplifies conventional surface-mount assembly. Pair the receiver with correctly shielded connectors and a stable reference network. Avoid relying on CMRR as a substitute for proper grounding or cable treatment, since installation faults can create differential interference that common-mode rejection cannot remove.

Where can I buy INA1650IPWR online?
The INA1650IPWR can be requested through the Request a Quote form on this page. The form is the appropriate route for checking current unit availability, order quantities, and delivery timing without relying on a static price that may change. The manufacturer identifies the exact orderable part as INA1650IPWR in its 14-pin TSSOP (PW) package.
What is the price of INA1650IPWR?
Use the Request a Quote form on this page for the current INA1650IPWR price and quantity availability. Pricing for this exact 14-pin TSSOP orderable part depends on order quantity and current supply conditions, so the page intentionally does not present a potentially stale figure. The manufacturer part number and package are INA1650IPWR and PW, respectively.
What is the lead time for INA1650IPWR?
The current lead time for INA1650IPWR should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, production scheduling, and shipment destination. The part is manufactured by Texas Instruments and is specified in the 14-pin PW TSSOP package with a -40 °C to +125 °C operating-temperature range.
Is INA1650IPWR in stock?
Current INA1650IPWR stock should be checked through the Request a Quote form on this page. The manufacturer product page identifies INA1650IPWR as a 14-pin TSSOP orderable configuration, but live quantity availability is not a fixed technical property of the device. Submit the desired quantity to receive an availability response for that order.
What are the key specifications of INA1650IPWR that engineers should know?
The INA1650IPWR is a dual-channel differential audio receiver with 91 dB CMRR, -120 dB THD+N at 1 kHz and 22 dBu, a 4.5 V to 36 V supply range, and a -40 °C to +125 °C operating range. According to the TI INA1650 datasheet, it uses SoundPlus technology and is housed in a 14-pin TSSOP (PW) package.
INA1650IPWR vs INA1650IPW - is there a functional difference?
INA1650IPWR is the reel-oriented orderable designation for the 14-pin PW TSSOP version of the Texas Instruments INA1650 dual audio receiver. INA1650IPW denotes the same PW package ordering option, with the final letter identifying the shipping format rather than a different receiver architecture. Confirm reel orientation, quantity, and labeling requirements before treating either order code as interchangeable.
What is the difference between INA1650IPWR and INA169QPWRG4Q1?
INA1650IPWR is a dual balanced audio line receiver, whereas INA169QPWRG4Q1 is a current-sense amplifier associated with a different measurement function. Although both can use 14-pin TSSOP-class packages, matching the package alone does not establish pin-to-pin compatibility. Use the manufacturer pin-description tables for both devices before considering any board-level substitution.
What is the difference between INA1650IPWR and INA168QPWRG4Q1?
INA1650IPWR performs dual differential audio line reception, while INA168QPWRG4Q1 is a current-sense amplifier designed around current measurement rather than balanced audio input handling. Their functions and internal pin assignments are not interchangeable merely because both use TSSOP packaging. A valid replacement must match the actual signal path, supply requirements, and every connected pin.
When should I choose INA1650IPWR over another dual line receiver?
Choose INA1650IPWR when the design requires two balanced audio channels, a specified 91 dB CMRR, and -120 dB THD+N at 1 kHz for a 22-dBu test signal. Its 4.5 V to 36 V supply range is also useful when the receiver must operate from a higher-voltage analog rail. Confirm channel gain, bandwidth, input impedance, and exact pinout against the system requirements before final selection.
Is INA1650IPWR suitable for professional audio and industrial audio?
Yes, INA1650IPWR is suitable for balanced audio interfaces requiring two receive channels and strong common-mode rejection. Its 91 dB CMRR helps reject interference appearing equally on both conductors, while the -120 dB THD+N specification limits added distortion at 1 kHz and 22 dBu. The -40 °C to +125 °C range also supports industrial environments.
What can replace INA1650IPWR?
No verified cross-brand, pin-to-pin drop-in replacement is identified for INA1650IPWR. INA168QPWRG4Q1 and INA169QPWRG4Q1 use related TSSOP packaging but perform current sensing rather than dual audio line reception, so they are not drop-in substitutes. The safest replacement path is to match the function, electrical ratings, and every pin against the INA1650 manufacturer datasheet.
Is there a Texas Instruments equivalent for INA1650IPWR?
The closest identified Texas Instruments orderable configuration is INA1650IPW in the same PW package family, but the final suffix relates to shipping format rather than electrical performance. The INA1650 family also includes INA1651, which is a single-channel device and therefore cannot replace a dual-channel INA1650 without changing the circuit. Verify suffix, pinout, and assembly requirements before ordering.
Where to download the INA1650IPWR datasheet PDF?
The official INA1650IPWR datasheet PDF is available from Texas Instruments at the INA1650 datasheet link on this page. The document is titled for the INA165x SoundPlus high-common-mode-rejection line receivers and covers the dual INA1650 and single INA1651. Use the manufacturer pinout, electrical tables, and application guidance for layout and substitution decisions.
Where can I find the INA1650IPWR pinout?
The INA1650IPWR pinout is shown in the pin-configuration section of the official TI INA1650 datasheet. The device uses a 14-pin TSSOP (PW) package. Assign PCB nets from that table rather than from package size alone, because similarly sized current-sense amplifiers can use the same mechanical outline with materially different electrical assignments.
How should the INA1650IPWR be used in a balanced audio input?
Use INA1650IPWR to receive a differential signal across a balanced pair, while connecting the opposite input to the circuit's appropriate audio reference through the recommended network. Its 91 dB CMRR suppresses interference common to both lines, and the two integrated channels support stereo reception. Use twisted-pair routing, controlled grounding, and supply decoupling to preserve that performance at the board level.

Dữ liệu tham khảo kỹ thuật cho INA1650IPWR — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose INA1650IPWR when the design requires a dual balanced-audio receiver with 91 dB CMRR, very low THD+N, and a 4.5 V to 36 V supply range. The two integrated channels are especially useful for stereo line inputs, while the -40 °C to +125 °C range supports industrial environments. INA1651 is a single-channel family member and is not a functional substitute when both stereo channels must be populated in one package. INA168QPWRG4Q1 and INA169QPWRG4Q1 are current-sense amplifiers; although their TSSOP-class packages may look similar, their measurement functions and pin assignments differ, so they should not be selected as direct replacements. For a new design, verify voltage gain, bandwidth, input impedance, quiescent current, reference arrangement, and exact pinout from the manufacturer datasheet. For an existing board, treat footprint equality as insufficient and compare every connected terminal before considering any substitution.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này
Brand Texas Instruments
Package 14-pin TSSOP (PW)
Channel Count 2 channels
Common-Mode Rejection Ratio 91 dB
THD+N -120 dB at 1 kHz and 22 dBu
Supply Voltage Range 4.5 V to 36 V
Operating Temperature Range -40 °C to +125 °C
Signal Function Dual differential audio line receiver

Ghi chú thiết kế

Route each balanced input as a tightly coupled pair with a continuous ground reference, and keep the two channels geometrically similar where they share connector or reference structures. Although the INA1650 provides 91 dB CMRR, unbalanced traces, broken return paths, or mismatched connectors can introduce differential noise that common-mode rejection cannot correct. Place protection and input-network components close to the package pins and avoid routing audio nets beneath switching-power regions.

Use the manufacturer-specified bypass capacitance and place it immediately across the supply and ground pins. The receiver supports a 4.5 V to 36 V supply range, but that wide operating range does not eliminate the need for local decoupling. Keep the supply loop short, provide a low-impedance return, and isolate analog input traces from inductors, power converters, and high-speed digital switching nodes.

Establish the input and reference connections directly from the INA1650 pin-description table. A balanced input requires the correct signal and opposite-input or reference arrangement; connecting both inputs as ordinary single-ended signals can invalidate the expected 91 dB CMRR behavior. Validate the assembled board with a common-mode injection test and observe output distortion at the application's operating signal level, using the -120 dB THD+N value as a datasheet condition rather than a guaranteed result for every board.

Thông tin tuân thủ

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Qualified
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

RoHS compliance is identified for INA1650IPWR. REACH status is listed without a definitive conclusion, and no specific AEC-Q100 qualification, lead-free statement, halogen-free statement, or conflict-minerals declaration was established for this orderable part.

Dữ liệu được xác minh vào: 2026-11-19 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

INA1650IPWR datasheet INA1650IPWR pinout INA1650IPWR datasheet pdf INA1650IPWR replacement INA1650IPWR equivalent INA1650IPWR cross reference INA1650IPWR price INA1650IPWR stock Texas Instruments INA1650IPWR INA1650IPWR 14-TSSOP pinout INA1650IPWR balanced audio receiver INA1650IPWR vs INA169QPWRG4Q1

Các bộ phận và thuật ngữ liên quan

Texas Instruments INA1650IPWR INA1650 INA1651 INA168QPWRG4Q1 INA169QPWRG4Q1 SoundPlus differential line receiver audio receiver interface IC common-mode rejection ratio CMRR total harmonic distortion plus noise THD+N balanced audio 14-pin TSSOP PW package surface mount 4.5 V to 36 V power supply RoHS REACH MSL 2 professional audio industrial audio
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ