Texas Instruments

INA321EA/2K5 - Micropower RRO Instrumentation Amplifier | Texas Instruments

N.º da peça: INA321EA/2K5 ✓ Ativo
500 uV Vdss 40 uA Id 8-pin VSSOP (DGK) Package
MOQ: 1 |

INA321EA/2K5 Visão geral

The Texas Instruments INA321EA/2K5 is a single-supply micropower CMOS instrumentation amplifier with 40 uA typical quiescent current, less than 1 uA shutdown current, and a 500 uV maximum offset specification. It provides rail-to-rail output, 94 dB common-mode rejection, 10 pA bias current, and external-resistor gain control in an 8-pin VSSOP (DGK) package.

An instrumentation amplifier is a differential analog amplifier optimized for measuring small signals superimposed on a larger common-mode voltage. The INA321 belongs to the hierarchy of instrumentation amplifiers, differential amplifiers, amplifier ICs, and analog semiconductors. Its differential input stage rejects common-mode interference while amplifying the voltage difference between its input terminals, making it useful for bridge sensors, biomedical instrumentation, and low-voltage current measurement.

Key features include a typical operating current of 40 uA, an offset voltage specified by the manufacturer at 500 uV maximum, a common-mode rejection ratio of 94 dB, and an input bias current of 10 pA. The shutdown function reduces quiescent current to below 1 uA. Its rail-to-rail output can approach the positive supply rail to within 0.02 V, while gain is established with external resistors. The high input impedance and low bias current are especially valuable when sensing high-source-impedance sensors.

The amplifier uses a CMOS instrumentation-amplifier architecture optimized for low power and single-supply operation. With a gain of 5 V/V, the listed bandwidth is 500 kHz, providing useful bandwidth for slow biomedical signals, industrial bridges, and general-purpose differential measurements. Because the output approaches the positive rail, correct common-mode range and output-swing calculations remain essential when operating near the supply limit.

Typical uses include low-power bridge-sensor conditioning, portable medical instrumentation, battery-powered sensor acquisition, current-shunt measurement, and precision analog front ends. The 40 uA operating current supports energy-limited systems, while shutdown supports duty-cycled measurement in which the amplifier remains inactive between readings. The low bias current minimizes disturbance from high-impedance sources.

When designing the circuit, place the gain-setting resistors close to the amplifier and verify the complete input and output common-mode range against the actual signal. If the input is unipolar, bias it near mid-supply rather than allowing a negative input excursion. Do not substitute a similarly packaged instrumentation amplifier unless its pin functions, gain architecture, common-mode range, and output-swing behavior have all been checked.

This product page combines the manufacturer's device specifications with practical application guidance, package information, pin mapping, sourcing guidance, and a comparison of available same-family choices. These engineering details help shorten component selection while keeping the decision focused on electrical compatibility rather than package name alone.

Alternativas drop-in para INA321EA/2K5 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

INA321EA/250

✅ Drop-In
📦 8-pin VSSOP (DGK)
Identical core INA321EA ratings; ordering quantity suffix changes from 2K5 to 250, with 0% change to output current, offset voltage, or bandwidth.

📋 Alternativa de referência (fora do catálogo)

INA321E/2K5

✅ Drop-In
📦 8-pin VSSOP (DGK)
Same INA321 instrumentation-amplifier family and VSSOP footprint; gain, 40 uA current, 94 dB CMRR, and 500 uV offset alignment differ by 0%.

📋 Alternativa de referência (fora do catálogo)

INA321E/250

✅ Drop-In
📦 8-pin VSSOP (DGK)
Same INA321 family function and pin architecture; ordering and grade suffix differ, while the listed 40 uA current, 94 dB CMRR, and 500 uV offset remain aligned.

📋 Alternativa de referência (fora do catálogo)

INA321EA/2K5G4

✅ Drop-In
📦 8-pin VSSOP (DGK)
Same INA321EA circuit and electrical ratings; G4 adds a manufacturing or lot-code suffix, with 0% change to output current, offset voltage, or bandwidth.

📋 Alternativa de referência (fora do catálogo)

INA321EA/2K5 Classificações máximas e características elétricas

Amplifier Type Single-supply micropower CMOS instrumentation amplifier
Number of Circuits 1 circuit
Typical Quiescent Current 40 uA
Corrente de desligamento <1 uA
Maximum Offset Voltage 500 uV
Low Offset Voltage +/-200 uV
Common-Mode Rejection Ratio 94 dB
Input Bias Current 10 pA
Gain Accuracy Temperature Coefficient 2 ppm/degree C
Gain 5 V/V
Bandwidth at 5 V/V Gain 500 kHz
Output Swing Approximately V+ - 0.02 V
Tensão de alimentação 5.5 V
Supply Type Single supply
Faixa de temperatura de operação -55 degrees C to +125 degrees C
Encapsulamento 8-pin VSSOP (DGK)
Tipo de montagem Surface mount
Gain Configuration External resistor

Configuração de pinos do INA321EA/2K5

MSOP-8 Package Pinout Diagram MSOP-8 3x3mm, P0.65mm, JEDEC MO-187. 1 8 2 7 3 6 4 5 MSOP-8
Pino 1 RG — Gain-setting resistor connection
Pino 2 IN- — Inverting input
Pino 3 IN+ — Noninverting input
Pino 4 V- — Negative supply connection
Pino 5 REF — Reference input for output-voltage biasing
Pino 6 OUT — Amplified output
Pino 7 V+ — Positive supply connection
Pino 8 RG — Gain-setting resistor connection

Aplicações típicas

INA321EA/2K5 é adequado para 6 aplicaçãos: Low-Power Bridge Sensor Conditioning, Portable Medical Signal Acquisition, Battery-Powered Current Measurement, Precision Industrial Pressure Interface, Battery-Powered IoT Sensor Node, Audio and Analog Front-End Buffering.

🏭

Low-Power Bridge Sensor Conditioning

The INA321EA/2K5 is well suited to bridge-based pressure, strain, and force sensors because its differential input rejects common-mode excitation variation while drawing only 40 uA of typical quiescent current. Place the sensor bridge across the supply and route its differential output to the amplifier inputs. The 94 dB common-mode rejection ratio helps suppress supply-related disturbance, while external resistors establish the required gain. The low 10 pA bias current reduces loading from high-impedance sensor nodes. Designers should still verify the bridge excitation voltage against the input common-mode range and ensure the output remains below the usable rail-to-rail swing.

💊

Portable Medical Signal Acquisition

The INA321EA/2K5 supports low-energy medical and physiological signal acquisition when the sensed differential voltage remains within the amplifier's input and output limits. Its 40 uA operating current, below-1 uA shutdown current, 10 pA bias current, and 94 dB CMRR reduce loading and improve rejection of common-mode interference. The amplifier is placed between the sensor electrodes or bridge and a precision ADC, with gain established by external resistors. Because the output is rail-to-rail, system designers should provide suitable input biasing and verify patient-safety isolation requirements with an appropriate protection and isolation architecture.

⚡

Battery-Powered Current Measurement

The INA321EA/2K5 can measure the differential voltage across a low-ohm current shunt in a battery-operated system. Its common-mode rejection of 94 dB helps reject voltage changes that appear equally across the shunt and amplifier inputs, while the low 10 pA bias current limits measurement error. The device consumes 40 uA during operation and less than 1 uA in shutdown, enabling the measurement circuit to remain active only during a measurement interval. Choose the external gain resistors so the maximum expected shunt voltage does not saturate the output, and confirm that the common-mode voltage remains inside the permitted input range.

🏭

Precision Industrial Pressure Interface

The INA321EA/2K5 provides a compact analog front end for industrial pressure and position transducers that produce a small differential signal on a larger common-mode voltage. Its 94 dB common-mode rejection reduces sensitivity to cable pickup and ground differences, while 500 uV maximum offset supports low-level measurements when the total error budget permits. The amplifier operates from a single supply and approaches the positive output rail within approximately 0.02 V, making it useful for compact sensor modules. Use short input traces, a solid ground plane, and the gain resistors near the IC. Confirm the transducer excitation, input range, output range, and industrial temperature requirements before releasing the design.

🧩

Battery-Powered IoT Sensor Node

The INA321EA/2K5 fits compact IoT sensor nodes where a differential transducer must be measured from a single low-energy rail. Its 40 uA typical operating current limits continuous overhead, and the shutdown mode reduces supply current to below 1 uA between readings. The 10 pA input bias current is beneficial when the sensor source impedance is high, while the 500 kHz bandwidth listed at 5 V/V gain is substantially faster than many slow environmental sensors require. The designer should enable shutdown during idle periods, retain the gain resistors close to the package, and use the ADC's low-power conversion mode to complete the duty-cycled measurement sequence efficiently.

🎧

Audio and Analog Front-End Buffering

The INA321EA/2K5 can buffer and amplify small differential signals in low-level audio or analog front-end circuitry when the signal bandwidth is modest and supply current must remain low. Its 10 pA bias current reduces disturbance of high-impedance sources, and its rail-to-rail output provides useful headroom on a single supply. The 500 kHz bandwidth at 5 V/V gain is adequate for many control, monitoring, and low-frequency audio paths, although it is not intended for high-fidelity wideband audio. Use the external gain network to set the desired signal gain and verify the output's ability to swing both close to ground and close to the positive rail.

Resumo dos produtos recomendados

ADS1262IPW Texas Instruments Usado em: Low-Power Bridge Sensor Conditioning, Portable Medical Signal Acquisition, Precision Industrial Pressure Interface, Battery-Powered IoT Sensor Node ADS1131IDR Texas Instruments Usado em: Low-Power Bridge Sensor Conditioning, Portable Medical Signal Acquisition, Battery-Powered Current Measurement, Battery-Powered IoT Sensor Node, Audio and Analog Front-End Buffering INA321EA/250 Same-family instrumentation amplifier alternative Usado em: Low-Power Bridge Sensor Conditioning, Audio and Analog Front-End Buffering INA240A4DR Texas Instruments Usado em: Portable Medical Signal Acquisition, Battery-Powered Current Measurement INA321E/2K5 Same-family alternative with matching architecture Usado em: Battery-Powered Current Measurement, Audio and Analog Front-End Buffering ADS8519IDB Texas Instruments Usado em: Precision Industrial Pressure Interface INA321EA/2K5G4 Same-family ordering alternative Usado em: Precision Industrial Pressure Interface INA321E/250 Same-family alternative for embedded sensing Usado em: Battery-Powered IoT Sensor Node
What is the INA321EA/2K5?
The INA321EA/2K5 is a Texas Instruments micropower CMOS instrumentation amplifier designed for low-power differential-signal measurement. According to the manufacturer datasheet, it uses 40 uA typical quiescent current, supports single-supply and bipolar operation, provides a rail-to-rail output, and is offered in an 8-pin VSSOP package with externally adjustable gain.
What are the key specifications of INA321EA/2K5 that engineers should know?
The INA321EA/2K5 combines 40 uA typical supply current with a maximum offset voltage of 500 uV, 94 dB common-mode rejection, and 10 pA input bias current. According to the manufacturer datasheet, its rail-to-rail output can extend to approximately 0.02 V below the positive supply, and its listed bandwidth is 500 kHz at a gain of 5 V/V. It also enters a shutdown state with less than 1 uA supply current.
Where can I download the INA321EA/2K5 datasheet PDF?
The official INA321EA/2K5 datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/ina321.pdf. The document contains the device description, electrical characteristics, gain-setting equations, typical application circuits, and the VSSOP pin configuration. Use the manufacturer document number and pin table when assigning PCB tracks or checking shutdown behavior.
Where can I find the INA321EA/2K5 pinout?
The INA321EA/2K5 uses an 8-pin VSSOP configuration with gain resistor, input, supply, reference, output, and shutdown-related functions. According to the manufacturer datasheet, use the pin-description table and package drawing to assign connections. Keep the external gain resistors close to the gain-setting pins and maintain a continuous ground return from the supply reference.
What is the difference between INA321EA/2K5 and INA321EA/250?
The INA321EA/2K5 and INA321EA/250 belong to the same Texas Instruments INA321EA family and use the same 8-pin VSSOP electrical configuration. Their ordering suffixes identify different shipment quantities, so their core amplifier ratings remain aligned rather than representing different circuit functions. Both provide 40 uA typical current, 500 uV maximum offset, 94 dB CMRR, and external-resistor gain control.
Is INA321EA/2K5 suitable for battery-powered sensors?
The INA321EA/2K5 is suitable for battery-powered sensing when low quiescent current is important. It draws 40 uA during operation and less than 1 uA in shutdown according to the manufacturer datasheet. Its 10 pA input bias current also limits the error introduced when measuring high-source-impedance sensors, while rail-to-rail output increases usable signal range on a single supply.
When should I choose INA321EA/2K5 over a higher-current instrumentation amplifier?
Choose the INA321EA/2K5 when battery life or standby consumption is more important than high-bandwidth or high-current performance. Its 40 uA typical operating current and below-1 uA shutdown current are well suited to duty-cycled sensor systems. Choose a higher-current amplifier instead when the application requires greater bandwidth, lower offset over a wider temperature range, rail-to-rail input, or other power-related performance.
Can the INA321EA/2K5 measure a current-shunt signal?
The INA321EA/2K5 can amplify a low differential voltage produced by a current shunt. Its 94 dB common-mode rejection helps reject supply and ground disturbances, while the 10 pA bias current is suitable for many precision shunt-measurement circuits. Check the common-mode range against the shunt voltage and choose a gain that keeps the amplifier output within its rail-to-rail swing.
What is the best drop-in replacement for INA321EA/2K5?
The closest drop-in choices are other Texas Instruments INA321EA ordering variants that retain the same 8-pin VSSOP pinout and core electrical ratings. According to the manufacturer family information, the INA321EA/250 and INA321E/2K5 provide the same basic instrumentation-amplifier function and gain architecture. Confirm the exact suffix, temperature grade, quantity code, and required automotive qualification before production substitution.
What can replace INA321EA/2K5?
A valid replacement must match the 8-pin VSSOP footprint, differential-input and gain-setting pin functions, supply range, common-mode range, and output-swing behavior. Texas Instruments INA321EA/250 is the closest ordering alternative identified for the same family. An INA333 should not be treated as a direct drop-in replacement because the manufacturer support discussion notes that it requires circuit modifications.
Is INA321EA/2K5 the same as INA321EA/250?
The INA321EA/2K5 and INA321EA/250 provide the same core INA321EA amplifier function and use the same 8-pin VSSOP configuration. The suffix difference changes the ordering quantity rather than the electrical gain or pin definition. Both are based on the 40 uA micropower, rail-to-rail-output architecture described in the manufacturer datasheet, subject to the ordering and qualification details of each suffix.
Is there a verified cross-brand drop-in equivalent for INA321EA/2K5?
No verified cross-brand, pin-for-pin drop-in equivalent is established for the INA321EA/2K5. The device has a specific 8-pin gain-setting arrangement and single-supply behavior that cannot be judged from package size alone. Before considering another manufacturer's amplifier, compare every pin function, gain equation, input common-mode range, output swing, offset, bias current, shutdown logic, and stability requirements.
How much current does INA321EA/2K5 consume?
The INA321EA/2K5 consumes 40 uA of typical quiescent current during normal operation according to the Texas Instruments product page. Its shutdown current is less than 1 uA. These values make the amplifier appropriate for portable instruments and duty-cycled sensor nodes, although total system current should also include external gain resistors and any other active circuitry.
Where can I buy INA321EA/2K5 online?
Use the Request a Quote form on this page to request current availability, order quantity, and delivery for the INA321EA/2K5. The exact MPN includes Texas Instruments' ordering suffix, so confirm that the requested device is the 8-pin VSSOP version rather than a different INA321 package or temperature option. Lead time and stock should be confirmed through the quote process.
What is the price of INA321EA/2K5?
Current pricing for the INA321EA/2K5 is available through the Request a Quote form on this page. The quote should identify the exact MPN, package, and required shipment quantity. This avoids relying on a stale historical price and lets purchasing confirm current component availability, lot traceability, and delivery terms.
What is the lead time and stock status for INA321EA/2K5?
Request the current lead time, minimum order quantity, and stock status for the INA321EA/2K5 using the Request a Quote form on this page. Because the manufacturer supports multiple INA321 ordering and temperature suffixes, the request should state the complete INA321EA/2K5 designation and the VSSOP package requirement. Purchasing can then confirm the current manufacturing and distribution position.

Dados de referência de engenharia para INA321EA/2K5 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the INA321EA/2K5 for low-power single-supply differential measurements requiring 40 uA typical current, 94 dB CMRR, 10 pA bias current, and external-resistor gain control. The INA321EA/250 is electrically equivalent and is appropriate when its ordering quantity is preferable. INA321E/2K5 and INA321E/250 provide the same-family architecture and 8-pin VSSOP footprint but require confirmation of their exact ordering and temperature details. INA321EA/2K5G4 is also functionally aligned but may be selected when its specific manufacturing-code designation is required. No cross-brand drop-in choice is established. Do not replace the device solely because another instrumentation amplifier uses an 8-pin package; confirm gain-pin assignments, input common-mode range, output swing, reference behavior, shutdown logic, bandwidth, and stability before substitution.

Comparação com alternativas

Parâmetro Este produto INA321EA/250 INA321E/2K5 INA321E/250 INA321EA/2K5G4
Package 8-pin VSSOP (DGK) 8-pin VSSOP (DGK) 8-pin VSSOP (DGK) 8-pin VSSOP (DGK) 8-pin VSSOP (DGK)
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Typical Quiescent Current 40 uA 40 uA 40 uA 40 uA 40 uA
Shutdown Current <1 uA <1 uA <1 uA <1 uA <1 uA
Maximum Offset Voltage 500 uV 500 uV 500 uV 500 uV 500 uV
Common-Mode Rejection Ratio 94 dB 94 dB 94 dB 94 dB 94 dB
Input Bias Current 10 pA 10 pA 10 pA 10 pA 10 pA
Bandwidth at 5 V/V Gain 500 kHz 500 kHz 500 kHz 500 kHz 500 kHz
Gain Configuration External resistor External resistor External resistor External resistor External resistor

Principais diferenciais

  • Very low active supply current (vs INA321EA/250)
  • Strong common-mode rejection for bridge sensing (vs INA321E/2K5)
  • Rail-to-rail output improves single-supply utilization (vs INA321EA/2K5G4)

Notas de projeto

Route the two differential inputs as a short, closely coupled pair and connect the external gain-setting resistors directly to the RG pins. Keep the input nodes away from switching nodes, high-current return paths, and the digital control return. The 10 pA bias current makes the amplifier suitable for high-impedance sources, but long PCB traces can still add leakage and capacitance. Use a continuous ground plane and place the device close to the source and gain resistors.

Do not assume that the output can reach the positive supply rail exactly. The manufacturer specifies a rail-to-rail output swing of approximately V+ minus 0.02 V. Leave the required output headroom when calculating gain from a unipolar sensor signal, and include reference-pin voltage in the output-voltage equation. Also verify the complete input common-mode range; a rail-to-rail output does not imply rail-to-rail input operation.

Use shutdown to reduce the supply current below 1 uA when measurements are infrequent. Place the local supply bypass capacitor close to the V+ and V- pins and provide a low-impedance ground return. For a single-supply circuit, bias the REF pin and signal inputs into the valid common-mode region. Account for the external resistor divider current when calculating total power and battery life because the 40 uA specification applies to the amplifier itself.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

No RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations are stated in the manufacturer information identified for this product.

Buscas relacionadas

INA321EA/2K5 datasheet INA321EA/2K5 pinout INA321EA/2K5 datasheet pdf INA321EA/2K5 equivalent INA321EA/2K5 replacement INA321EA/2K5 drop-in replacement INA321EA/2K5 price INA321EA/2K5 stock INA321EA/2K5 schematic INA321EA/2K5 application circuit Texas Instruments INA321EA/2K5 INA321EA/2K5 vs INA321EA/250 INA321 VSSOP-8 instrumentation amplifier 40 uA rail-to-rail instrumentation amplifier

Componentes & termos relacionados

Texas Instruments INA321EA/2K5 INA321EA/250 INA321E/2K5 INA321E/250 INA321EA/2K5G4 instrumentation amplifier differential amplifier amplifier IC analog semiconductor micropower rail-to-rail output CMOS common-mode rejection ratio CMRR input bias current offset voltage quiescent current external resistor gain single-supply operation VSSOP-8 MSOP-8 surface-mount package bridge sensor current-shunt measurement medical instrumentation IoT sensor node
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ