Texas Instruments

INA333SHKQ - Zero-Drift Instrumentation Amplifier | Texas Instruments

N.º da peça: INA333SHKQ ✓ Ativo
5 V typical Vdss 2.0 µA typical Id 8-pin CFP (HKQ) Package
MOQ: 1 |

INA333SHKQ Visão geral

Texas Instruments INA333SHKQ is a micro-power, zero-drift, rail-to-rail output instrumentation amplifier with a closed-loop gain range of 100 to 1000 V/V. It is offered in an 8-pin HKQ ceramic flat package and is rated for operation from -55°C to +210°C. The high-temperature grade makes the device suitable for precision sensing systems that require stable amplification under extended thermal exposure.

An instrumentation amplifier is a specialized analog amplifier optimized for measuring small differential signals while rejecting common-mode interference. Its internal differential architecture preserves signal integrity when the inputs share substantial common-mode voltage. Within the broader semiconductor hierarchy, an instrumentation amplifier belongs to the amplifier IC family and combines precision input, gain-setting, and differential-to-single-ended conversion functions in one device.

The INA333SHKQ supports closed-loop gains from 100 to 1000 V/V. At a gain of 100, the manufacturer lists a maximum input offset voltage of 25 µV, a typical drift of 0.2 µV/°C, and noise density of 55 nV/√Hz. Its listed common-mode rejection is at least 100 dB at a gain of 10. These characteristics make the amplifier suitable for bridge-based sensors where small millivolt-level differential outputs must be measured accurately.

The device operates from a single 1.8 V to 3.5 V supply according to the INA333 family specifications. Its rail-to-rail output stage permits the output voltage to approach the supply limits, improving utilization of low-voltage signal chains. A single external resistor sets the gain, simplifying implementation while preserving accurate differential amplification. The micro-power operating current supports battery-operated instrumentation where continuous sensor monitoring is required without excessive load.

Typical uses include pressure and force transducers, thermocouple and RTD interfaces, biomedical instrumentation, portable measurement systems, and industrial process-control equipment. The -55°C to +210°C operating range distinguishes the SHKQ grade from the standard commercial INA333 variants and supports use in high-temperature measurement environments.

When laying out an INA333SHKQ circuit, route the differential input and gain-resistor connections as short, symmetric traces, and place input filtering close to the source. Check common-mode input limits at the selected supply voltage because the allowable input range is not independent of supply. Confirm output headroom at the required gain and load, especially in low-voltage systems where rail-to-rail output behavior is important.

This page combines the high-temperature INA333SHKQ specifications with application guidance, package information, engineering design notes, and a careful drop-in replacement assessment. It is intended to help engineers determine whether the device fits a precision sensing application without overlooking gain, temperature, supply, or PCB-footprint constraints.

Alternativas drop-in para INA333SHKQ — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Nenhuma alternativa drop-in disponível para este produto.

Solicitar alternativas

INA333SHKQ Classificações máximas e características elétricas

Product Type Micro-power zero-drift instrumentation amplifier
Number of Circuits 1 circuit
Closed-Loop Gain Range 100 to 1000 V/V
Tensão de alimentação 5 V typical
Input Offset Voltage at Gain 100 25 µV maximum
Input Offset Voltage Drift at Gain 100 0.2 µV/°C typical
Noise Density at Gain 100 55 nV/√Hz
Common-Mode Rejection at Gain 10 100 dB minimum
Input Bias Current 2.0 µA typical
Slew Rate 0.040 V/µs
Tipo de saída Rail-to-rail output
Faixa de temperatura de operação -55°C to +210°C
Package Type 8-pin CFP (HKQ)
Número de pinos 8 pins
Manufacturer Texas Instruments

Guia de Configuração de Pinos do INA333SHKQ 8-pin cfp (hkq)

Configuração de pinos para INA333SHKQ (pacote 8-pin cfp (hkq)). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.

Diagrama de pinagem do pacote 8-pin cfp (hkq) para INA333SHKQ

Nenhum dado detalhado de pinagem disponível para INA333SHKQ.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

INA333SHKQ é adequado para 6 aplicaçãos: High-Temperature Pressure Transducers, Battery-Powered Sensor Interfaces, Biomedical and Diagnostic Sensing, RTD and Thermocouple Measurement, Industrial Process and Force Measurement, Precision Test and Measurement.

🏭

High-Temperature Pressure Transducers

The INA333SHKQ is appropriate for bridge-based pressure transducers that produce small differential signals but share a larger common-mode voltage. Its gain range of 100 to 1000 V/V provides substantial signal amplification, while the specified 100 dB minimum common-mode rejection at gain 10 supports rejection of common supply and ground disturbances. The -55°C-to-+210°C operating range is valuable in pressure-monitoring equipment installed near heated process equipment. A practical implementation places the bridge excitation and amplifier inputs close together, uses one accurate external gain resistor, and checks that the bridge midpoint remains inside the amplifier's allowable common-mode range.

📱

Battery-Powered Sensor Interfaces

The INA333SHKQ fits portable sensing systems where energy use limits how aggressively the input stage can operate. Its micro-power architecture supports continuous monitoring of differential sensor outputs without adding the higher supply current associated with many general-purpose amplifier stages. Gains up to 1000 V/V allow weak bridge or transducer outputs to be amplified before conversion by an ADC. Because the part also offers rail-to-rail output, the signal can use much of a low-voltage supply range. Design the gain resistor for the required sensitivity, add input filtering matched to the sensor bandwidth, and account for amplifier and sensor current when calculating battery life.

💊

Biomedical and Diagnostic Sensing

The INA333SHKQ can amplify small differential bio-sensor or diagnostic signals when the design requires its precision offset and drift characteristics. The listed 25 µV maximum input offset voltage at gain 100 and 0.2 µV/°C typical drift provide a useful starting point for determining whether gain-induced output error remains acceptable. Rail-to-rail output can improve signal utilization in compact, low-voltage instruments. Designers must still validate leakage, input protection, isolation, patient-safety requirements, and applicable medical standards for the complete system; the amplifier's temperature rating alone does not establish medical-system compliance.

🔥

RTD and Thermocouple Measurement

The INA333SHKQ is suitable for low-level temperature-sensor interfaces when the selected gain keeps the signal within the amplifier's input and output ranges. A gain of 100 produces meaningful amplification for millivolt-class RTD signals, while the instrumentation-amplifier architecture rejects common-mode noise encountered on shared sensor wiring. The 0.2 µV/°C typical drift at gain 100 is especially relevant when measuring small temperature changes over a wide ambient range. For thermocouples, confirm the cold-junction compensation and input polarity, while for RTDs apply excitation current and ratiometric calibration carefully. Input filtering should reject mains-frequency interference without removing the desired thermal response.

🏭

Industrial Process and Force Measurement

The INA333SHKQ supports precision industrial force, load-cell, and process-sensor interfaces where the transducer output is differential and relatively small. Gains from 100 to 1000 V/V allow the same amplifier family to cover different sensor sensitivities, while the high-temperature grade supports equipment operating near hot machinery or ovens. Maintain symmetry between input and return paths to prevent conversion of common-mode noise into differential error. Calibrate gain and offset over the expected temperature range, provide suitable surge and ESD protection at external connectors, and verify that the common-mode input never leaves its valid operating region during startup or sensor faults.

🔧

Precision Test and Measurement

The INA333SHKQ is useful in bench and laboratory instruments that amplify low-level differential sources before accurate conversion or comparison. The 100-to-1000 V/V gain range supports common probe and sensor sensitivities, while the maximum 25 µV offset specification at gain 100 helps constrain fixed error after amplification. For resistance or thermocouple measurements, thermal gradients between the amplifier and precision resistor network can create errors greater than the listed offset, so use low-drift gain components and minimize temperature differences. The rail-to-rail output helps preserve resolution in low-voltage test systems, but the designer should still confirm output swing at the selected load and gain.

What is the INA333SHKQ?
The INA333SHKQ is a Texas Instruments micro-power, zero-drift, rail-to-rail output instrumentation amplifier designed for precision differential-signal measurement. It provides a closed-loop gain range of 100 to 1000 V/V in an 8-pin CFP package. According to the manufacturer datasheet, its high-temperature grade operates from -55°C to +210°C, distinguishing it from the standard commercial INA333 options.
What are the key specifications of INA333SHKQ that engineers should know?
The INA333SHKQ combines a 100-to-1000 V/V gain range, rail-to-rail output, 25 µV maximum input offset voltage at gain 100, and a -55°C-to-+210°C operating range. The manufacturer datasheet also lists 0.2 µV/°C typical offset drift at gain 100, 55 nV/√Hz noise density at gain 100, and at least 100 dB common-mode rejection at gain 10.
Where can I download the INA333SHKQ datasheet PDF?
The official INA333SHKQ product page provides the manufacturer data sheet, identified as revision C. Use the Texas Instruments INA333-HT product-details page linked on this page to access the datasheet PDF and ordering information. The 8-CFP HKQ package drawing, recommended application circuit, electrical characteristics, and pin configuration should be taken from that manufacturer document.
Where is the INA333SHKQ pinout and package information?
The INA333SHKQ uses an 8-pin CFP package with the TI HKQ package designation. The manufacturer product page identifies the package as HKQ with eight pins and specifies the operating range as -55°C to +210°C. Use the pin-description table and package drawing in the TI data sheet when assigning PCB tracks because no separate public pin table is reproduced on this page.
What supply voltage does the INA333SHKQ use?
The INA333SHKQ is designed for low-voltage single-supply operation, and the manufacturer lists a typical supply voltage of 5 V for this orderable variant. Before using the device in a specific design, verify the valid operating-supply interval and common-mode input range in the manufacturer data sheet for the INA333 family and the selected INA333SHKQ grade.
Is the INA333SHKQ suitable for high-temperature applications?
Yes, the INA333SHKQ is specifically identified by Texas Instruments as a high-temperature INA333 grade and is specified from -55°C to +210°C. That operating range makes it appropriate for precision measurement near heated equipment or for extended-temperature industrial equipment, provided the associated passives, connectors, enclosure, and sensor also meet the required temperature limits.
What can replace the INA333SHKQ?
A true replacement for the INA333SHKQ must use the same 8-pin CFP HKQ footprint, preserve the differential input and gain-resistor connections, and meet the -55°C-to-+210°C operating requirement. No verified pin-to-pin replacement was established from the available cross-reference information. Standard SOIC and MSOP INA333 variants are electrically related but are not drop-in replacements because their package dimensions and pin geometry differ.
Is INA333SKGD1 the same as INA333SHKQ?
No, the INA333SKGD1 is not a drop-in replacement for the INA333SHKQ. Although both belong to the Texas Instruments INA333 family, the INA333SKGD1 uses the SKG package while the INA333SHKQ uses the high-temperature HKQ CFP package. The different land patterns require different PCB footprints, and the SHKQ grade also has the specified -55°C-to-+210°C operating range.
When should I choose the INA333SHKQ over a standard INA333 variant?
Choose the INA333SHKQ when the application requires an instrumentation amplifier in the HKQ 8-pin CFP footprint and operation across the specified -55°C-to-+210°C range. A standard INA333 in SOIC or MSOP can be appropriate for room-temperature designs, but changing to it is not a PCB drop-in substitution. For low-voltage precision bridges, compare the required gain, noise, offset, common-mode range, and output swing as well as temperature rating.
Is the INA333SHKQ suitable for bridge-sensor measurements?
Yes, the INA333SHKQ is well suited to low-level bridge-sensor measurements because it offers gains from 100 to 1000 V/V, 25 µV maximum input offset voltage at gain 100, and at least 100 dB common-mode rejection at gain 10. Keep the bridge excitation and signal ground arrangement symmetrical, verify the common-mode input range, and account for gain error and offset drift during calibration.
How much offset drift does the INA333SHKQ have?
The INA333SHKQ has a typical input offset voltage drift of 0.2 µV/°C at a gain of 100. At a gain of 100, a 25 µV input offset produces approximately 2.5 mV of output error before calibration. High-temperature installations should include this drift in the uncertainty budget and avoid placing the amplifier next to a major heat source when additional thermal stability is required.
How much noise does the INA333SHKQ have at gain 100?
The manufacturer datasheet lists a noise density of 55 nV/√Hz for the INA333SHKQ at a gain of 100. Noise density must be integrated over the measurement bandwidth to estimate total RMS input noise. The useful bandwidth should therefore match the sensor signal rather than being made unnecessarily wide, especially when the source resistance, gain, and required resolution are close to the design limits.
Where can I buy INA333SHKQ and what is the price?
Use the Request a Quote form on this page to request current INA333SHKQ availability, unit pricing, minimum order quantity, and lead time. The component is a catalog part with an official manufacturer datasheet, and its commercial status can be checked through the linked Texas Instruments product page. A current quote is preferable to relying on historical pricing because high-temperature grade components can have limited distribution.
What is the lead time for INA333SHKQ?
The current lead time for INA333SHKQ should be requested through the Request a Quote form on this page. The manufacturer identifies the MPN as part of the INA333-HT high-temperature family, but live manufacturing and distribution schedules can vary by quantity and date. Include the required order quantity and target delivery date in the request so the supplier can confirm the most relevant schedule.
Is INA333SHKQ in stock?
Stock availability for INA333SHKQ changes with market conditions and order quantity, so use the Request a Quote form on this page for a current availability check. The linked distributor and manufacturer listings are useful starting points for confirming the exact 8-pin CFP ordering configuration, but only a current quote confirms a deliverable quantity and shipment schedule.
INA333SHKQ vs OPA333AIDR: which is better for a bridge sensor?
The INA333SHKQ is the better choice when the design specifically needs an integrated instrumentation amplifier with gains of 100 to 1000 V/V, a gain-set resistor, and high-temperature operation. The OPA333AIDR is a precision operational amplifier and requires external gain and signal-conditioning circuitry. They are not pin-to-pin drop-in alternatives because their packages and electrical roles differ.

Dados de referência de engenharia para INA333SHKQ — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the INA333SHKQ when the design needs an integrated instrumentation amplifier, a gain of 100 to 1000 V/V, and operation across the -55°C-to-+210°C range in the TI HKQ 8-pin CFP footprint. It is particularly appropriate for bridge sensors, precision temperature measurement, and industrial equipment near heat sources. A standard INA333 in SOIC or MSOP may be preferable for room-temperature designs, but those packages are not PCB drop-in replacements and require different layouts. The OPA333 family is useful when a general-purpose operational amplifier and external gain network provide more flexibility, but it does not replace the INA333's integrated instrumentation-amplifier function. Before finalizing the choice, verify supply range, common-mode input limits, output swing, gain error, offset drift, noise bandwidth, thermal conditions, and the availability of the exact 8-pin CFP configuration.

Comparação com alternativas

Parâmetro Este produto
Brand Texas Instruments
Package 8-pin CFP (HKQ)
Product Type Micro-power zero-drift instrumentation amplifier
Closed-Loop Gain Range 100 to 1000 V/V
Supply Voltage 5 V typical
Input Offset Voltage at Gain 100 25 µV maximum
Offset Drift at Gain 100 0.2 µV/°C typical
Noise Density at Gain 100 55 nV/√Hz
Common-Mode Rejection at Gain 10 100 dB minimum
Operating Temperature Range -55°C to +210°C

Principais diferenciais

  • High-temperature operational range (vs INA333SKGD1)
  • Integrated gain range for precision differential measurement (vs OPA333AIDR)
  • Low offset specification at useful gain (vs OPA333AIDR)

Notas de projeto

Route the two differential inputs as short, closely matched traces and connect the gain-setting resistor directly across the designated gain pins. Avoid introducing unequal copper lengths, long loops, or ground-current paths between the source and amplifier. For bridge sensors, position input filtering close to the INA333SHKQ so that transient energy is shunted before reaching the amplifier. Keep sensitive signal returns away from switching-converter outputs and high-current power paths.

Verify the common-mode input range at the actual supply voltage and throughout startup, shutdown, and sensor-fault conditions. Rail-to-rail output does not imply that the input pins can tolerate every voltage reached on the external bus. Also calculate the offset contribution after multiplication by gain: 25 µV at gain 100 produces approximately 2.5 mV of output offset before calibration. Include offset drift of 0.2 µV/°C typical in long-distance or high-temperature measurements.

Place input and output bypass capacitors close to their associated pins and use a quiet ground reference for the analog path. Decouple the amplifier supply locally so that switching-node current does not flow through sensitive signal-return copper. Check the output-voltage headroom at the intended load and gain, particularly in low-voltage designs where the usable swing is limited by the output current and output configuration.

The INA333SHKQ supports a -55°C-to-+210°C operating range, but that rating does not remove thermal-design requirements from the assembled instrument. Minimize temperature gradients between the amplifier, gain resistor, reference elements, and sensor because drift in external components can dominate the amplifier's 0.2 µV/°C typical offset drift. For high-temperature equipment, provide thermal isolation from hot structures and evaluate long-term offset stability at the actual operating temperature.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The manufacturer identifies INA333SHKQ as a high-temperature INA333 grade, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was included in the product information reviewed for this page.

Dados verificados em: 2026-11-14 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

INA333SHKQ datasheet INA333SHKQ pinout INA333SHKQ datasheet pdf INA333SHKQ equivalent INA333SHKQ replacement INA333SHKQ cross reference INA333SHKQ price INA333SHKQ stock Texas Instruments INA333SHKQ INA333SHKQ vs INA333SKGD1 INA333SHKQ vs OPA333AIDR INA333SHKQ 8 CFP pinout INA333SHKQ high temperature amplifier INA333SHKQ bridge sensor application

Componentes & termos relacionados

Texas Instruments INA333SHKQ INA333-HT INA333 family INA333SKGD1 OPA333AIDR micro-power instrumentation amplifier zero-drift amplifier rail-to-rail output amplifier precision differential measurement closed-loop gain input offset voltage offset voltage drift common-mode rejection ratio CMRR input bias current noise density slew rate bridge sensor RTD thermocouple pressure transducer 8-pin CFP HKQ package surface-mount ceramic package high-temperature instrumentation
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ