Renesas Electronics

ISL83491IP - 3.3V RS-485/422 Transceiver | Renesas

N.º da peça: ISL83491IP ✓ Ativo
3 V to 3.6 V Vdss RS-485 and RS-422 Rds(on) 14-pin PDIP Package
MOQ: 1 |

ISL83491IP Visão geral

The Renesas Electronics ISL83491IP is a 3.3 V, low-power, single RS-485/RS-422 transceiver designed for balanced serial-data communication in a 14-pin through-hole Dual Inline Package. The ISL83491IP combines one driver and one receiver, supports full-duplex RS-422 and half-duplex RS-485 networks, and operates from a 3 V to 3.6 V supply according to the product information.

An RS-485/RS-422 transceiver is an interface IC that converts logic-level transmit and receive signals into differential, balanced line signals. Differential signaling improves noise immunity by rejecting common-mode voltage, while the RS-485 standard supports multipoint buses and the RS-422 standard supports point-to-point or multidrop balanced links. The ISL83491IP belongs to the broader transceiver hierarchy within interface ICs and industrial communication semiconductors.

The device is described as a 3.3 V low-power BiCMOS part that can operate as either a high-speed transceiver or a slew-rate-limited device. This flexibility allows the same pinout and interface architecture to address data rates where low EMI is more important than maximum throughput. The single-driver, single-receiver arrangement also reduces component count in full-duplex RS-422 links, while the driver-enable and receiver-enable functions support controlled bus operation.

The 14-pin DIP package is intended for through-hole PCB assembly and is useful in industrial control equipment, instrumentation, communications adapters, and legacy or leaded systems. A DIP footprint offers generous spacing between leads, which can simplify manual inspection, prototyping, and rework. Designers should still evaluate connector spacing, insulation requirements, grounding, and high-voltage creepage when the transceiver is used in an industrial enclosure.

Typical applications include industrial RS-485 field buses, factory automation links, building-control networks, telemetry equipment, and data-acquisition systems. In an RS-485 network, the transceiver converts the controller's UART logic into a differential bus signal and converts differential bus data back into UART-compatible receive logic. In an RS-422 design, the driver and receiver can support separate point-to-point differential links.

The primary design consideration is bus termination. Long or high-noise RS-485 cables generally use termination at both ends of the bus, while RS-422 commonly places termination at the receiver. The selected data-rate mode, cable length, topology, grounding method, and transceiver count should be evaluated together because excessive loading or incorrect termination can produce reflections and unstable differential voltage.

This product summary consolidates the device function, interface standards, supply range, package details, verified comparison behavior, and practical implementation guidance into one engineering-focused reference for evaluating the ISL83491IP in new and existing through-hole designs.

Alternativas drop-in para ISL83491IP — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com ISL83491IP (mesmo formato e footprint) — diferindo em Duplex Mode, Maximum Data Rate, Package, Product Type, Transceiver Configuration.

Renesas Electronics
Duplex Mode: Half duplex
Maximum Data Rate: 10 Mbps
Package: 8-pin PDIP
Comparar com ISL83491IP →
Renesas Electronics
Duplex Mode: Full duplex
Maximum Data Rate: 250 kbps
Package: 8-pin PDIP (8-PDIP)
Comparar com ISL83491IP →

Nenhuma alternativa drop-in disponível para este produto.

Solicitar alternativas

ISL83491IP Especificações

Product Type 1/1 RS-485/RS-422 transceiver
Supply Voltage Range 3 V to 3.6 V
Nominal Supply Voltage 3.3 V
Supported Standards RS-485 and RS-422
Driver Count 1 driver
Receiver Count 1 receiver
Technology BiCMOS
Operating Mode High-speed or slew-rate-limited
Faixa de temperatura de operação -40 °C to +85 °C
Package Type 14-pin PDIP
Tipo de montagem Through-hole
Logic and Communication Balanced differential RS-485/RS-422

Guia de Configuração de Pinos do ISL83491IP 14-pin pdip

Configuração de pinos para ISL83491IP (pacote 14-pin pdip). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote 14-pin pdip para ISL83491IP

Nenhum dado detalhado de pinagem disponível para ISL83491IP.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

ISL83491IP é adequado para 6 aplicaçãos: Industrial RS-485 Field Bus, Point-to-Point RS-422 Link, Factory Automation Controller, Building Control Network, Data Acquisition Instrument, Telemetry and Remote Equipment.

🏭

Industrial RS-485 Field Bus

The ISL83491IP fits industrial RS-485 field-bus interfaces because it combines a differential driver and receiver at a 3.3 V supply while supporting high-speed and slew-rate-limited operating modes. The 14-pin through-hole package is particularly useful when maintaining existing controller cards, remote I/O modules, or production-test fixtures. Designers can use the driver-enable and receiver-enable functions to control bus direction and avoid unwanted transmitter activity. Slew-rate-limited operation can reduce high-frequency emissions on longer industrial cables, although the final rate must be checked against cable length and topology. The 3.3 V rail also simplifies integration with modern UART-based controllers.

🔧

Point-to-Point RS-422 Link

The ISL83491IP supports full-duplex point-to-point RS-422 links through its independent differential driver and receiver paths. This arrangement is useful for connecting a controller to a remote encoder, data logger, position sensor, or test instrument over balanced cabling. A 3.3 V supply suits modern embedded systems, while the leaded DIP package simplifies assembly and rework in industrial control hardware. Separate termination at the receiver is generally required according to the system impedance and cable length. The 14-pin footprint also leaves the circuit compatible with established through-hole RS-422 boards, reducing the mechanical changes required during modernization.

⚙️

Factory Automation Controller

The ISL83491IP is appropriate for factory automation controllers that exchange commands and diagnostic data with distributed equipment over balanced wiring. Its 3.3 V operation can be shared with the controller's digital logic, while the RS-485/RS-422 capability supports both multidrop field buses and isolated point-to-point links. The through-hole 14-pin package is advantageous for ruggedized legacy platforms, maintenance controllers, and manually assembled test equipment. Slew-rate-limited mode should be considered where reducing edge-related EMI is important around motors, contactors, and switching power supplies. Cable routing, common-mode grounding, and bus termination remain essential to preserve differential signal integrity.

🧩

Building Control Network

The ISL83491IP can connect building-control equipment such as sensor nodes, room controllers, HVAC interfaces, and supervisory panels using an RS-485 or RS-422 backbone. Its 3.3 V supply requirement supports low-voltage embedded control boards, and the through-hole package suits controller products assembled in moderate volumes. The device's selectable operating approach allows slow, slew-limited communication where EMI control is more important, or high-speed operation where update latency and protocol throughput take priority. In a building installation, the design should include protective grounding, appropriately placed termination, and suitable surge protection while keeping the transceiver interface consistent with the selected bus topology.

📟

Data Acquisition Instrument

The ISL83491IP is useful in data-acquisition instruments that must communicate with remote sensors or laboratory equipment over a balanced bus. The separate receiver and driver support RS-422-style point-to-point collection links, while the 3.3 V supply can simplify connection to FPGA- or MCU-based measurement systems. A 14-pin DIP package remains practical for laboratory instruments, interface cards, and service modules that favor through-hole assembly. Signal integrity depends on controlled grounding and termination, especially when cables pass near switching regulators or high-current laboratory equipment. The transceiver should be paired with suitable protection and filtering when external cables expose the board to conducted noise or ESD events.

📡

Telemetry and Remote Equipment

The ISL83491IP fits remote telemetry equipment that must return sensor information over an industrial balanced link. Its 3.3 V operation is compatible with low-power embedded controllers, and the driver and receiver enable controls help manage half-duplex RS-485 traffic efficiently. The leaded DIP package supports equipment requiring field-serviceable through-hole construction or use in ruggedized legacy platforms. For long cables, the interface should be evaluated for maximum data rate, termination placement, common-mode range, and EMI susceptibility. Slew-rate-limited mode can provide a more gradual transition and lower emissions, but the protocol's required throughput must still be met. Protection components should be selected for the actual cable environment and grounding arrangement.

Resumo dos produtos recomendados

ISL83491IBZ-T Surface-mount member of the same transceiver family Usado em: Industrial RS-485 Field Bus, Point-to-Point RS-422 Link, Factory Automation Controller, Building Control Network, Data Acquisition Instrument, Telemetry and Remote Equipment MAX3491CSD+T 3.3 V RS-485/RS-422 transceiver reference Usado em: Industrial RS-485 Field Bus, Factory Automation Controller, Data Acquisition Instrument MAX481 Legacy RS-485 transceiver reference Usado em: Industrial RS-485 Field Bus, Point-to-Point RS-422 Link, Building Control Network, Telemetry and Remote Equipment MAX3491ESD+ 3.3 V differential transceiver reference Usado em: Point-to-Point RS-422 Link, Factory Automation Controller, Building Control Network, Data Acquisition Instrument, Telemetry and Remote Equipment
What is the ISL83491IP?
The ISL83491IP is a 3.3 V, single RS-485/RS-422 transceiver with one driver and one receiver in a 14-pin PDIP package. According to the ISL83491 datasheet, it is a BiCMOS device intended for balanced serial-data links and can be configured for high-speed or slew-rate-limited operation. The package is designed for through-hole PCB mounting.
What is the operating voltage of the ISL83491IP?
The ISL83491IP operates from a 3 V to 3.6 V supply, with 3.3 V as the nominal operating voltage. Product specifications identify the device as a 3.3 V low-power RS-485/RS-422 transceiver. The interface supports 3.3 V systems without requiring a 5 V supply rail.
Where can I download the ISL83491IP datasheet PDF?
The ISL83491IP datasheet PDF is available through the Intersil datasheet listing for part ISL83491IP. The document is a 17-page PDF describing the 3.3 V low-power RS-485/RS-422 transceiver family. Use the manufacturer pin-description and connection tables when assigning PCB signals and selecting external resistors and capacitors.
Where is the pinout for the ISL83491IP?
The ISL83491IP uses a 14-pin PDIP footprint with standard through-hole lead spacing. Use the pin-description table in the ISL83491 manufacturer datasheet to identify driver inputs, receiver outputs, enables, supply connections, and ground pins. The public product result confirms the 14-PDIP package but does not provide a reliable complete numbered pin table.
How does the ISL83491IP support both RS-485 and RS-422?
The ISL83491IP provides a differential driver, differential receiver, and separate enable controls that can be connected for the topology required by the design. RS-485 commonly uses a shared bidirectional bus with termination at both ends, while RS-422 commonly uses separate driver and receiver paths. The appropriate mode depends on wiring, bus topology, and termination.
What is the difference between the high-speed and slew-rate-limited modes?
The high-speed mode is intended for the highest supported communication rate, while slew-rate-limited operation reduces the rate of driver-edge transitions to limit high-frequency EMI. According to the ISL83491 family description, the device supports either operating approach. The correct mode should be selected using the required distance, data rate, cable characteristics, and emissions constraints.
Where can I buy the ISL83491IP online?
The ISL83491IP can be requested through the Request a Quote form on this page. The form accepts the exact 14-pin PDIP manufacturer part number and lets the purchasing process confirm current supply, lot availability, and delivery expectations. Use the exact suffix ISL83491IP when requesting a quotation.
What is the price of the ISL83491IP?
Current pricing for the ISL83491IP should be obtained through the Request a Quote form on this page. Because availability and commercial terms can change by quantity, package, and manufacturing allocation, the form provides the appropriate route for a current quotation. Quote the exact MPN ISL83491IP and specify the required order quantity.
What is the lead time for the ISL83491IP?
Current lead time for the ISL83491IP should be confirmed through the Request a Quote form on this page. Lead time can depend on factory inventory, assembly allocation, and the requested quantity. Providing the exact MPN, target quantity, and required delivery date enables the purchasing team to return a meaningful commitment.
Is the ISL83491IP in stock?
Current ISL83491IP stock status should be checked through the Request a Quote form on this page. The form is the appropriate channel for confirming production supply, packaged-part availability, and the quantity that can be allocated. Submit ISL83491IP and the required quantity to receive a current supply response.
What is the best drop-in replacement for the ISL83491IP?
No confirmed drop-in replacement is established for the ISL83491IP because the 14-pin PDIP package is a stringent compatibility requirement. ISL83491IBZ-T uses a 14-pin SOIC package, while MAX3491CSD+T and MAX3491ESD+ also use small-outline packages, so they require different PCB footprints. Verify the package and every enable and supply connection before considering any substitution.
Can the MAX3491CSD+T replace the ISL83491IP?
The MAX3491CSD+T is not a footprint-compatible drop-in replacement for the ISL83491IP because it is offered in a 14-pin NSOIC package rather than a 14-pin PDIP. Although it is a 3.3 V RS-485/RS-422 transceiver supporting rates up to 10 Mbps, the lead arrangement differs. A PCB redesign or adapter is required, and all logic and enable connections must be rechecked.
ISL83491IP vs ISL83491IBZ-T: which should I choose?
Choose ISL83491IP for a legacy through-hole PCB with a 14-pin PDIP footprint, and choose ISL83491IBZ-T for a new surface-mount PCB with a 14-pin SOIC footprint. The distinction is mechanical rather than a general change of transceiver class. The two package options cannot be substituted on the same land pattern without an adapter or board redesign.
When should I choose the ISL83491IP over a surface-mount equivalent?
Choose the ISL83491IP when maintaining a through-hole industrial design, producing a low-volume prototype, or avoiding surface-mount assembly is more important than minimizing PCB area. Its 14-pin PDIP package supports inspection and rework. For compact new equipment, a verified 14-pin SOIC equivalent may offer a smaller footprint, but it is not a direct drop-in replacement.
What are the key specifications of ISL83491IP that engineers should know?
The key ISL83491IP specifications are a 3 V to 3.6 V supply range, one driver, one receiver, RS-485 and RS-422 support, BiCMOS operation, and a 14-pin PDIP package. The family description also identifies high-speed and slew-rate-limited operating modes. Its specified operating-temperature range is -40 °C to +85 °C.

Dados de referência de engenharia para ISL83491IP — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the ISL83491IP when maintaining a through-hole PCB that uses a 14-pin DIP transceiver footprint, particularly for industrial, building-control, telemetry, or legacy data-acquisition equipment. Its 3 V to 3.6 V operating range suits 3.3 V logic, and the family supports high-speed or slew-rate-limited operation. Select ISL83491IBZ-T when the same transceiver class is needed on a new surface-mount board. MAX3491CSD+T and MAX3491ESD+ are useful engineering references for 3.3 V RS-485/RS-422 operation, but their small-outline packages make them PCB redesign options rather than drop-in replacements. Before fixing the choice, verify the exact pin assignments, enable-control behavior, maximum data rate, common-mode range, supply-current budget, and protection requirements. The existing package and bus topology should take priority over a superficially similar data-rate specification.

Comparação com alternativas

Parâmetro Este produto
Brand Renesas Electronics
Package 14-pin PDIP
Product Type 1/1 RS-485/RS-422 transceiver
Supply Voltage 3 V to 3.6 V
Nominal Supply 3.3 V
Technology BiCMOS
Operating Mode High-speed or slew-rate-limited
Operating Temperature -40 °C to +85 °C
Mounting Type Through-hole

Principais diferenciais

  • Through-hole package preserves 14-pin DIP PCB compatibility (vs MAX3491CSD+T)
  • Supports both communication rate and EMI-conscious operating styles (vs ISL83491IBZ-T)
  • Single-transceiver integration reduces parallel component count (vs MAX3491ESD+)

Notas de projeto

Do not substitute a surface-mount transceiver without redesigning the PCB. The ISL83491IP uses a 14-pin PDIP footprint, while ISL83491IBZ-T, MAX3491CSD+T, and MAX3491ESD+ use small-outline packages. Even if a substitute has similar voltage and data-rate ratings, a mechanical adapter or new layout is required. After any replacement, verify every enable pin, supply pin, driver output, receiver input, and exposed interface connection rather than relying only on the transceiver description.

Apply termination according to the selected topology. A multidrop RS-485 bus normally places termination across the differential pair at both physical ends, whereas RS-422 point-to-point links commonly terminate at the receiver. Avoid placing unnecessary termination on every node because it can excessively load the bus. Confirm cable impedance, length, node count, logic thresholds, and data rate together; a nominal termination value is not sufficient if the complete wiring topology creates an excessive load.

Choose high-speed operation only when the required throughput justifies its edge rate. Slew-rate-limited operation can reduce high-frequency harmonics and radiated EMI, which is valuable near switching regulators, motors, and long cables. Keep the transceiver away from high-current switching nodes, provide a solid ground reference, and route the balanced pair together. External protection may be required for cable-connected ports, but its capacitance and clamping behavior should be checked against the intended data rate.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The available product information does not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations.

Dados verificados em: 2026-11-15 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

ISL83491IP datasheet ISL83491IP pinout ISL83491IP datasheet pdf ISL83491IP equivalent ISL83491IP replacement ISL83491IP cross reference ISL83491IP footprint Renesas ISL83491IP ISL83491IP RS-485 transceiver ISL83491IP 3.3V transceiver ISL83491IP vs ISL83491IBZ-T ISL83491IP price ISL83491IP stock ISL83491IP industrial RS-485 ISL83491IP 14-PDIP

Componentes & termos relacionados

Renesas Electronics Intersil ISL83491IP ISL83491IBZ-T MAX3491CSD+T MAX3491ESD+ MAX481 RS-485 transceiver RS-422 transceiver balanced differential interface interface IC BiCMOS 3.3 V transceiver 14-pin PDIP through-hole package high-speed mode slew-rate-limited mode driver enable receiver enable industrial automation building control network telemetry equipment data acquisition differential signaling
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ