ISL84541IB - Dual SPST Analog Switch, 2.7-12V | Renesas
N.º da peça: ISL84541IB ✓ AtivoISL84541IB Visão geral
An analog switch is a semiconductor interface device that connects or disconnects signals under digital control while preserving the analog signal rather than converting it to a digital representation. The ISL84541 belongs to the analog-switch hierarchy within interface ICs and is controlled by CMOS-compatible logic inputs. It is intended to route low-voltage signals while limiting insertion loss, switching transients, and power consumption in portable and precision equipment.
Key characteristics include low power consumption below 5 µW, leakage current down to 100 pA maximum, and on-resistance matching between channels below 1 Ω. The manufacturer identifies the device as fully specified at 3.3 V and 5 V supplies. These attributes are valuable in battery-powered equipment, where both leakage and switching charge influence battery life, and in measurement paths where predictable channel resistance is important.
The ISL84541 uses complementary SPST switches to provide independent routing in both directions. Its low charge injection limits the voltage disturbance created when control inputs change state, while fast switching reduces control-to-signal delay. The single-supply architecture simplifies system power design, and the low-leakage implementation helps preserve high-impedance sensor and sampling nodes between switch transitions.
Typical uses include mobile-device signal routing, battery-powered instruments, audio and communication interfaces, test and measurement systems, and low-voltage analog acquisition circuits. Renesas also identifies the ISL84541 as a drop-in replacement for selected MAX4541-series and DG9461/DG9262-series devices, providing a practical basis for second-source and legacy-design migration.
Designers should account for the external drive and ground relationship of the logic inputs, preserve the specified supply range, and connect unused control inputs to a defined logic level. Signal-path layout should minimize parasitic capacitance because switch transitions can inject charge into high-impedance nodes. PCB signal integrity should also be checked across the complete voltage and frequency range used by the selected analog source.
This page combines the manufacturer function description, exact device identifiers, drop-in cross references, and practical application guidance to support component selection and PCB-level replacement decisions without relying on generic analog-switch descriptions.
Alternativas drop-in para ISL84541IB — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
ISL84541IBZ
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
ISL84541IHZ-T
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MAX4541
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MAX4542
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MAX4543
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
DG9461
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
DG9262
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
ISL84541IB Classificações máximas e características elétricas
| Number of Circuits | 2 circuits |
| Switch Configuration | 2 × SPST |
| Multiplexer Configuration | 1:1 |
| Supply Voltage Range | +2.7 V to +12 V |
| Typical On Resistance | 30 Ω |
| Distributor Listing On Resistance | 60 Ω |
| On-Resistance Matching Between Channels | <1 Ω |
| Typical Turn-On Time | 35 ns |
| Typical Turn-Off Time | 25 ns |
| Maximum Charge Injection | 5 pC |
| Maximum Low-Voltage Leakage Current | 100 pA |
| Maximum Leakage Current at 85°C | 10 nA |
| Power Consumption | <5 µW |
| Encapsulamento | 8-SOIC |
| Contagem de pinos | 8 pins |
| Specified Supply Test Points | 3.3 V and 5 V |
| Tipo de montagem | Surface mount |
| Lead-Free Availability | Available as an option |
Guia de Configuração de Pinos do ISL84541IB 8-soic
Configuração de pinos para ISL84541IB (pacote 8-soic). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.
Nenhum dado detalhado de pinagem disponível para ISL84541IB.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
ISL84541IB é adequado para 6 aplicaçãos: Battery-Powered Portable Equipment, High-Impedance Sensor Signal Routing, Audio Signal Switching, Test and Measurement Systems, Low-Voltage Communication Interfaces, Industrial Control Signal Multiplexing.
Battery-Powered Portable Equipment
The ISL84541IB fits battery-powered portable equipment because it operates from +2.7 V to +12 V while consuming less than 5 µW and providing leakage current down to 100 pA maximum. Its two independent SPST paths can route a pair of low-voltage analog signals without requiring a separate switch for each channel. In a portable acquisition or audio accessory, the low 5 pC maximum charge injection limits control-transition disturbance, while the 30 Ω typical on resistance is suitable for many low-impedance or moderate-impedance source paths. Select the supply and logic levels to match the portable system, and confirm leakage over the complete battery-discharge range.
Recomendado
High-Impedance Sensor Signal Routing
The ISL84541IB is suitable for routing high-impedance sensor signals when leakage and injected charge must remain controlled. Its leakage current can reach 100 pA maximum, and the maximum charge injection is 5 pC, helping prevent the switch itself from becoming the dominant error source between measurements. The dual-SPST arrangement can connect a sensor to an amplifier, filter, or measurement input while maintaining a separate control path. A typical 30 Ω on resistance may be acceptable for many sensor sources, but very high source impedances require an error-budget calculation. Keep traces short, provide a defined bias path, and verify settling time with the complete source and measurement network.
Recomendado
Audio Signal Switching
The ISL84541IB can route low-level audio signals between two independent analog paths in portable or compact audio equipment. Its fast 35 ns turn-on and 25 ns turn-off times limit switching delay, while charge injection of 5 pC helps reduce transient disturbance at the controlled node. The typical 30 Ω on resistance is suitable for many line-level audio routes when the source impedance and load are compatible. Because audio performance also depends on distortion, noise, and channel matching, evaluate those limits against the actual source and amplifier. Place the switch close to the routed node and maintain a continuous return path to reduce coupling from control signals and switching circuitry.
Recomendado
Test and Measurement Systems
The ISL84541IB is useful in test and measurement equipment for connecting DUT signals to instrumentation paths with controlled leakage and switching behavior. Two SPST switches provide independent routing in a compact 8-SOIC footprint, and the device is specified at both 3.3 V and 5 V supplies for integration with common test-system rails. The low power consumption below 5 µW reduces loading in precision systems, while the maximum 10 nA leakage at 85°C helps control thermal leakage effects. For high-accuracy measurements, include switch on resistance, leakage, charge injection, and settling time in the uncertainty budget. Follow the manufacturer pin diagram and keep sensitive analog traces away from high-impedance control-node routing.
Recomendado
Low-Voltage Communication Interfaces
The ISL84541IB can support low-voltage signal routing within portable communication equipment where supply voltage, leakage, and switching speed are constrained. The single +2.7 V to +12 V operating range accommodates common 3.3 V and 5 V interface rails, and the 35 ns/25 ns switching times provide rapid path selection. Two independently controlled SPST channels allow transmit, receive, or auxiliary signal paths to share a compact package. The 30 Ω typical on resistance adds series loss and should be included in link-budget calculations for high-impedance interfaces. Maintain short signal traces, provide a solid reference plane, and keep switch control transitions away from sensitive RF or clock nodes to minimize coupling.
Recomendado
Industrial Control Signal Multiplexing
The ISL84541IB can multiplex low-voltage control or diagnostic signals in compact industrial equipment while operating from a +2.7 V to +12 V supply. Its dual-SPST architecture provides independent connection and isolation for two signals, and the low-leakage implementation helps prevent inactive branches from disturbing nearby control circuitry. The 8-SOIC package is practical for boards with limited area, while single-supply operation simplifies rail planning. Industrial designs should still verify temperature-range, transient, and EMC requirements for the exact ordering code. Add protection appropriate to the exposed signal lines, keep the analog routing compact, and ensure the logic levels remain valid throughout power-up and power-down.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para ISL84541IB — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | ISL84541IBZ | ISL84541IHZ-T | MAX4541 | MAX4542 | MAX4543 |
|---|---|---|---|---|---|---|
| Package | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC |
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Analog Devices | Analog Devices | Analog Devices |
| Number of Switch Circuits | 2 | 2 | 2 | 2 | 2 | 2 |
| Switch Configuration | Dual SPST | Dual SPST | Dual SPST | Dual SPST | Dual SPST | Dual SPST |
Principais diferenciais
- Dual independently controlled SPST paths in one 8-SOIC package (vs MAX4541ESA+)
- Low-leakage and low-power operation for portable analog routing (vs MAX4542)
- Manufacturer-published drop-in family migration path (vs DG9461)
- Equivalent same-family ordering option (vs ISL84541IHZ-T)
Notas de projeto
Treat the 30 Ω typical on resistance and 5 pC maximum charge injection as part of the analog error budget. For a high-impedance source, calculate the settling time created by the switch resistance, source impedance, parasitic capacitance, and the 35 ns turn-on or 25 ns turn-off transition. Place the device close to the sensitive node, keep the switched trace short, and avoid sharing long routes with clock or fast digital control signals.
Assign pins only from the manufacturer connection diagram and maintain a continuous ground reference beneath the 8-SOIC footprint. Route the two analog channels independently to prevent one channel's switching transient from coupling into the other. Where leakage matters, keep nearby board surfaces and guard structures from creating unintended input capacitance or leakage paths. Validate the final placement against the exposed analog node and the direction of the SOIC footprint.
The ISL84541IB supports a single +2.7 V to +12 V supply and consumes less than 5 µW under the manufacturer's stated conditions. Ensure logic-control levels remain valid at every supply value, including startup and shutdown. Connect unused control inputs to a defined logic level so an unconnected input cannot float. Decouple the supply close to the device according to the application-circuit guidance in the manufacturer datasheet.
Do not substitute a family member solely from its marketing description. Confirm the exact pinout, package, supply range, on-resistance limit, leakage limit, switching time, and logic thresholds for the proposed replacement. Renesas identifies several MAX4541-series and DG9461/DG9262-series parts as drop-in options, but production qualification should include worst-case timing, temperature, and system-level signal-integrity checks.
Informações de conformidade
The ISL84541 family is described as available in a Pb-free option, but the exact lead-free status of the ISL84541IB ordering code is not stated. RoHS, REACH, halogen-free, and conflict-minerals status require confirmation for the exact suffix.