Renesas Electronics

ISL84541IB - Dual SPST Analog Switch, 2.7-12V | Renesas

부품 번호: ISL84541IB ✓ 활성
+2.7 V to +12 V Vdss 100 pA Id 30 Ω Rds(on) 8-SOIC Package
MOQ: 1 |

ISL84541IB 개요

Renesas ISL84541IB is a precision dual analog switch built as two independent SPST circuits in an 8-SOIC package. The device operates from a single +2.7 V to +12 V supply, offers a typical on resistance of 30 Ω, and supports both normally open and normally closed signal paths. Its 35 ns typical turn-on time, 25 ns typical turn-off time, and maximum 5 pC charge injection make it suitable for low-voltage analog routing.

An analog switch is a semiconductor interface device that connects or disconnects signals under digital control while preserving the analog signal rather than converting it to a digital representation. The ISL84541 belongs to the analog-switch hierarchy within interface ICs and is controlled by CMOS-compatible logic inputs. It is intended to route low-voltage signals while limiting insertion loss, switching transients, and power consumption in portable and precision equipment.

Key characteristics include low power consumption below 5 µW, leakage current down to 100 pA maximum, and on-resistance matching between channels below 1 Ω. The manufacturer identifies the device as fully specified at 3.3 V and 5 V supplies. These attributes are valuable in battery-powered equipment, where both leakage and switching charge influence battery life, and in measurement paths where predictable channel resistance is important.

The ISL84541 uses complementary SPST switches to provide independent routing in both directions. Its low charge injection limits the voltage disturbance created when control inputs change state, while fast switching reduces control-to-signal delay. The single-supply architecture simplifies system power design, and the low-leakage implementation helps preserve high-impedance sensor and sampling nodes between switch transitions.

Typical uses include mobile-device signal routing, battery-powered instruments, audio and communication interfaces, test and measurement systems, and low-voltage analog acquisition circuits. Renesas also identifies the ISL84541 as a drop-in replacement for selected MAX4541-series and DG9461/DG9262-series devices, providing a practical basis for second-source and legacy-design migration.

Designers should account for the external drive and ground relationship of the logic inputs, preserve the specified supply range, and connect unused control inputs to a defined logic level. Signal-path layout should minimize parasitic capacitance because switch transitions can inject charge into high-impedance nodes. PCB signal integrity should also be checked across the complete voltage and frequency range used by the selected analog source.

This page combines the manufacturer function description, exact device identifiers, drop-in cross references, and practical application guidance to support component selection and PCB-level replacement decisions without relying on generic analog-switch descriptions.

드롭인 대체품: ISL84541IB — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

ISL84541IBZ

✅ 드롭인
📦 8-SOIC
Primary switching, voltage, resistance, leakage, and timing characteristics show 0% stated functional difference; exact ordering suffix differs.

📋 참조 대체품 (카탈로그에 없음)

ISL84541IHZ-T

✅ 드롭인
📦 8-SOIC
No measurable difference was identified across the primary technical parameters, representing 0% stated performance difference.

📋 참조 대체품 (카탈로그에 없음)

MAX4541

✅ 드롭인
📦 8-SOIC
Renesas designates the MAX4541 family as a drop-in replacement with 0% required topology change; electrical tolerances require final review.

📋 참조 대체품 (카탈로그에 없음)

MAX4542

✅ 드롭인
📦 8-SOIC
Renesas designates the MAX4541-through-MAX4544 family as a drop-in replacement with 0% required topology change.

📋 참조 대체품 (카탈로그에 없음)

MAX4543

✅ 드롭인
📦 8-SOIC
Renesas designates the MAX4541-through-MAX4544 family as a drop-in replacement with 0% required topology change.

📋 참조 대체품 (카탈로그에 없음)

DG9461

✅ 드롭인
📦 8-SOIC
Renesas identifies DG9461 as a drop-in replacement with 0% required topology change; grade-specific limits require review.

📋 참조 대체품 (카탈로그에 없음)

DG9262

✅ 드롭인
📦 8-SOIC
Renesas identifies the DG9262 family as a drop-in replacement with 0% required topology change; grade-specific limits require review.

📋 참조 대체품 (카탈로그에 없음)

ISL84541IB 최대 정격 & 전기적 특성

Number of Circuits 2 circuits
Switch Configuration 2 × SPST
Multiplexer Configuration 1:1
Supply Voltage Range +2.7 V to +12 V
Typical On Resistance 30 Ω
Distributor Listing On Resistance 60 Ω
On-Resistance Matching Between Channels <1 Ω
Typical Turn-On Time 35 ns
Typical Turn-Off Time 25 ns
Maximum Charge Injection 5 pC
Maximum Low-Voltage Leakage Current 100 pA
Maximum Leakage Current at 85°C 10 nA
Power Consumption <5 µW
패키지 8-SOIC
핀 수 8 pins
Specified Supply Test Points 3.3 V and 5 V
실장 유형 Surface mount
Lead-Free Availability Available as an option

ISL84541IB 8-soic 핀 구성 가이드

ISL84541IB(8-soic 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

ISL84541IB의 8-soic 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: ISL84541IB.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

ISL84541IB 적합 용도: 6 애플리케이션s: Battery-Powered Portable Equipment, High-Impedance Sensor Signal Routing, Audio Signal Switching, Test and Measurement Systems, Low-Voltage Communication Interfaces, Industrial Control Signal Multiplexing.

📱

Battery-Powered Portable Equipment

The ISL84541IB fits battery-powered portable equipment because it operates from +2.7 V to +12 V while consuming less than 5 µW and providing leakage current down to 100 pA maximum. Its two independent SPST paths can route a pair of low-voltage analog signals without requiring a separate switch for each channel. In a portable acquisition or audio accessory, the low 5 pC maximum charge injection limits control-transition disturbance, while the 30 Ω typical on resistance is suitable for many low-impedance or moderate-impedance source paths. Select the supply and logic levels to match the portable system, and confirm leakage over the complete battery-discharge range.

🧩

High-Impedance Sensor Signal Routing

The ISL84541IB is suitable for routing high-impedance sensor signals when leakage and injected charge must remain controlled. Its leakage current can reach 100 pA maximum, and the maximum charge injection is 5 pC, helping prevent the switch itself from becoming the dominant error source between measurements. The dual-SPST arrangement can connect a sensor to an amplifier, filter, or measurement input while maintaining a separate control path. A typical 30 Ω on resistance may be acceptable for many sensor sources, but very high source impedances require an error-budget calculation. Keep traces short, provide a defined bias path, and verify settling time with the complete source and measurement network.

🎧

Audio Signal Switching

The ISL84541IB can route low-level audio signals between two independent analog paths in portable or compact audio equipment. Its fast 35 ns turn-on and 25 ns turn-off times limit switching delay, while charge injection of 5 pC helps reduce transient disturbance at the controlled node. The typical 30 Ω on resistance is suitable for many line-level audio routes when the source impedance and load are compatible. Because audio performance also depends on distortion, noise, and channel matching, evaluate those limits against the actual source and amplifier. Place the switch close to the routed node and maintain a continuous return path to reduce coupling from control signals and switching circuitry.

🖥️

Test and Measurement Systems

The ISL84541IB is useful in test and measurement equipment for connecting DUT signals to instrumentation paths with controlled leakage and switching behavior. Two SPST switches provide independent routing in a compact 8-SOIC footprint, and the device is specified at both 3.3 V and 5 V supplies for integration with common test-system rails. The low power consumption below 5 µW reduces loading in precision systems, while the maximum 10 nA leakage at 85°C helps control thermal leakage effects. For high-accuracy measurements, include switch on resistance, leakage, charge injection, and settling time in the uncertainty budget. Follow the manufacturer pin diagram and keep sensitive analog traces away from high-impedance control-node routing.

🌐

Low-Voltage Communication Interfaces

The ISL84541IB can support low-voltage signal routing within portable communication equipment where supply voltage, leakage, and switching speed are constrained. The single +2.7 V to +12 V operating range accommodates common 3.3 V and 5 V interface rails, and the 35 ns/25 ns switching times provide rapid path selection. Two independently controlled SPST channels allow transmit, receive, or auxiliary signal paths to share a compact package. The 30 Ω typical on resistance adds series loss and should be included in link-budget calculations for high-impedance interfaces. Maintain short signal traces, provide a solid reference plane, and keep switch control transitions away from sensitive RF or clock nodes to minimize coupling.

🏭

Industrial Control Signal Multiplexing

The ISL84541IB can multiplex low-voltage control or diagnostic signals in compact industrial equipment while operating from a +2.7 V to +12 V supply. Its dual-SPST architecture provides independent connection and isolation for two signals, and the low-leakage implementation helps prevent inactive branches from disturbing nearby control circuitry. The 8-SOIC package is practical for boards with limited area, while single-supply operation simplifies rail planning. Industrial designs should still verify temperature-range, transient, and EMC requirements for the exact ordering code. Add protection appropriate to the exposed signal lines, keep the analog routing compact, and ensure the logic levels remain valid throughout power-up and power-down.

추천 제품 요약

ISL84541IHZ-T Pin-compatible family alternative with equivalent primary performance 사용처: Battery-Powered Portable Equipment, Audio Signal Switching MAX4541ESA+ Documented 8-SOIC drop-in replacement option 사용처: Battery-Powered Portable Equipment, Audio Signal Switching ISL84541IBZ Same-family pin-compatible alternative 사용처: High-Impedance Sensor Signal Routing, Low-Voltage Communication Interfaces DG9461 Manufacturer-designated drop-in replacement family 사용처: High-Impedance Sensor Signal Routing, Industrial Control Signal Multiplexing MAX4541 Drop-in replacement family for measurement switching 사용처: Test and Measurement Systems DG9262 Drop-in replacement family for compact routing 사용처: Test and Measurement Systems MAX4542 Drop-in replacement family for dual-SPST routing 사용처: Low-Voltage Communication Interfaces MAX4543 Manufacturer-designated drop-in replacement family 사용처: Industrial Control Signal Multiplexing
What is the ISL84541IB and what does it do?
The ISL84541IB is a dual SPST analog switch that routes two independent analog signals in an 8-SOIC package. According to the Renesas ISL84541/ISL84544 datasheet, it operates from a single +2.7 V to +12 V supply and supports both normally open and normally closed paths. Typical on resistance is 30 Ω, while typical turn-on and turn-off times are 35 ns and 25 ns, respectively.
What is the supply voltage range of ISL84541IB?
The ISL84541IB operates from +2.7 V to +12 V on a single supply. The Renesas ISL84541/ISL84544 datasheet states that the device is fully specified at 3.3 V and 5 V, making it directly relevant to common low-voltage portable, industrial, and test-system rails. Designers should also ensure that control-pin voltages remain compatible with the selected supply voltage.
What are the key specifications of ISL84541IB that engineers should know?
The ISL84541IB combines two SPST switches, a +2.7 V to +12 V supply range, and an 8-SOIC package in one device. The Renesas datasheet lists typical on resistance of 30 Ω, turn-on time of 35 ns, turn-off time of 25 ns, charge injection up to 5 pC, and power consumption below 5 µW. On-resistance matching between the two channels is below 1 Ω.
Where can I download the ISL84541IB datasheet PDF?
The official ISL84541/ISL84544 datasheet is available on the Renesas document page at https://www.renesas.com/en/document/dst/isl84541-isl84544-datasheet. That document contains the device description, electrical characteristics, pin information, and application details. Use the ISL84541 and ISL84544 datasheet together with the exact ISL84541IB ordering information when confirming grade and packaging details.
Where can I find the ISL84541IB pinout?
The ISL84541IB pin assignment is published in the Renesas ISL84541/ISL84544 datasheet, and the device uses an 8-SOIC package. Use the pin-description and connection-diagram tables in that document when assigning PCB nets. Do not infer switch-terminal orientation from a generic SOIC footprint because the two independently controlled channels and their common pins must match the manufacturer diagram.
What is the best drop-in replacement for ISL84541IB?
The Renesas ISL84541 family is identified as a drop-in replacement for selected MAX4541-through-MAX4544, DG9461, and DG9262-through-DG9263 devices. A suitable replacement must use the same 8-SOIC footprint and provide compatible control and signal connections. Confirm voltage, on-resistance, leakage, charge-injection, and switching-speed limits in the replacement datasheet before production substitution.
What can replace ISL84541IB in an existing 8-SOIC PCB?
ISL84541IB can be replaced by a pin-compatible 8-SOIC device explicitly designated as a drop-in replacement, including the applicable MAX4541-series and DG9461-family parts named in the Renesas documentation. The cross-reference result for MAX4541ESA+ describes the terminals and package as consistent. Perform a final schematic and signal-integrity review because device-specific logic thresholds and timing tolerances can differ.
Is the MAX4541ESA+ equivalent to ISL84541IB?
The MAX4541ESA+ is presented as a complete replacement for ISL84541IB because its terminals and package are consistent and the main performance characteristics match. It uses an 8-pin SOIC configuration for this comparison. The Renesas ISL84541 documentation also identifies the MAX4541 family as a drop-in replacement, but production approval should still include a review of supply limits and application-specific timing.
What is the best Analog Devices equivalent for ISL84541IB?
The MAX4541ESA+ from Analog Devices is the clearest drop-in equivalent identified in the replacement information for ISL84541IB. The comparison states that the terminals, package, and principal functional characteristics are consistent, making it suitable for an 8-SOIC footprint without PCB changes. Review the Analog Devices datasheet for any parameter tolerance or application-specific difference before releasing a redesign.
IS ISL84541IB suitable for battery-powered equipment?
The ISL84541IB is suitable for battery-powered equipment because it operates from +2.7 V to +12 V, consumes less than 5 µW, and offers leakage current down to 100 pA maximum. The Renesas datasheet specifically targets battery-powered applications that benefit from low power and low leakage. Actual battery life depends on the selected switch state, signal voltage, control activity, and leakage conditions.
ISL84541IB vs ISL84541IHZ-T - which should I choose?
ISL84541IB and ISL84541IHZ-T have equivalent primary performance characteristics, and the comparison identifies no measurable difference across the principal technical parameters. The distinction concerns the exact ordering and packaging treatment rather than switching behavior. Choose the ordering code that matches the required delivery format and verify the final mechanical drawing and pin configuration.
When should I choose ISL84541IB over a MAX4541-series replacement?
Choose ISL84541IB when the design needs a manufacturer-documented dual-SPST switch with a +2.7 V to +12 V single supply, typical 30 Ω on resistance, and less than 5 µW power consumption. A MAX4541-series option is appropriate when its independent specifications, qualification, sourcing, or lifecycle requirements are preferable. Both families can support an 8-SOIC drop-in migration, but the final choice should follow system-level requirements.
Is ISL84541IB suitable for high-impedance analog signal routing?
The ISL84541IB is suitable for high-impedance analog routing when charge injection and off-state leakage are important. Its maximum charge injection is 5 pC, and leakage can be as low as 100 pA, helping limit disturbance and unintended loading between switching events. The fast 35 ns turn-on and 25 ns turn-off also support controlled sampling paths, although layout capacitance and settling time still require evaluation.
Where can I buy ISL84541IB online?
The ISL84541IB can be requested through the Request a Quote form on this XAIPART product page. Submit the exact MPN, required quantity, package or tape-and-reel preference, and delivery target so current commercial terms can be confirmed. The manufacturer documentation identifies the device as an 8-SOIC dual-SPST analog switch operating from +2.7 V to +12 V.
What is the price of ISL84541IB?
Current commercial terms for the ISL84541IB are available through the Request a Quote form on this page. The form captures the exact MPN and requested quantity so the offer can reflect current availability and delivery requirements. The component is identified as a 2-circuit, 1:1, 60 Ω-rated 8-SOIC analog switch in distributor product information.
What is the lead time and stock status for ISL84541IB?
Current lead time and stock status for ISL84541IB should be confirmed through the Request a Quote form on this page. Provide the required quantity and any reel, tray, or tube preference with the request. The part is listed in distributor channels as an 8-SOIC dual-SPST switch, but current inventory can vary with order quantity and manufacturing schedule.

엔지니어링 참조 데이터: ISL84541IB — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose ISL84541IB when the design needs a dual-SPST analog switch in an 8-SOIC package with a documented +2.7 V to +12 V supply range, 30 Ω typical on resistance, low leakage, and sub-40 ns switching times. ISL84541IBZ or ISL84541IHZ-T may be preferable when the required delivery format or exact ordering treatment differs while primary performance remains equivalent. A MAX4541-series device is appropriate when its qualification, sourcing, or device-specific limits better match the product, and the comparison identifies MAX4541ESA+ as a complete 8-SOIC replacement. DG9461 and DG9262-family options provide additional manufacturer-designated drop-in paths. Before selecting any replacement, compare temperature grade, supply limits, on resistance, leakage, charge injection, switching time, and logic thresholds in the exact manufacturer datasheet.

대체품과의 비교

파라미터 이 제품 ISL84541IBZ ISL84541IHZ-T MAX4541 MAX4542 MAX4543
Package 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC
Brand Renesas Electronics Renesas Electronics Renesas Electronics Analog Devices Analog Devices Analog Devices
Number of Switch Circuits 2 2 2 2 2 2
Switch Configuration Dual SPST Dual SPST Dual SPST Dual SPST Dual SPST Dual SPST

주요 차별점

  • Dual independently controlled SPST paths in one 8-SOIC package (vs MAX4541ESA+)
  • Low-leakage and low-power operation for portable analog routing (vs MAX4542)
  • Manufacturer-published drop-in family migration path (vs DG9461)
  • Equivalent same-family ordering option (vs ISL84541IHZ-T)

설계 노트

Treat the 30 Ω typical on resistance and 5 pC maximum charge injection as part of the analog error budget. For a high-impedance source, calculate the settling time created by the switch resistance, source impedance, parasitic capacitance, and the 35 ns turn-on or 25 ns turn-off transition. Place the device close to the sensitive node, keep the switched trace short, and avoid sharing long routes with clock or fast digital control signals.

Assign pins only from the manufacturer connection diagram and maintain a continuous ground reference beneath the 8-SOIC footprint. Route the two analog channels independently to prevent one channel's switching transient from coupling into the other. Where leakage matters, keep nearby board surfaces and guard structures from creating unintended input capacitance or leakage paths. Validate the final placement against the exposed analog node and the direction of the SOIC footprint.

The ISL84541IB supports a single +2.7 V to +12 V supply and consumes less than 5 µW under the manufacturer's stated conditions. Ensure logic-control levels remain valid at every supply value, including startup and shutdown. Connect unused control inputs to a defined logic level so an unconnected input cannot float. Decouple the supply close to the device according to the application-circuit guidance in the manufacturer datasheet.

Do not substitute a family member solely from its marketing description. Confirm the exact pinout, package, supply range, on-resistance limit, leakage limit, switching time, and logic thresholds for the proposed replacement. Renesas identifies several MAX4541-series and DG9461/DG9262-series parts as drop-in options, but production qualification should include worst-case timing, temperature, and system-level signal-integrity checks.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The ISL84541 family is described as available in a Pb-free option, but the exact lead-free status of the ISL84541IB ordering code is not stated. RoHS, REACH, halogen-free, and conflict-minerals status require confirmation for the exact suffix.

관련 검색

ISL84541IB datasheet ISL84541IB datasheet pdf ISL84541IB pinout ISL84541IB specifications Renesas ISL84541IB ISL84541IB 8-SOIC ISL84541IB equivalent ISL84541IB replacement ISL84541IB drop-in replacement ISL84541IB vs MAX4541 ISL84541IB price ISL84541IB stock

관련 부품 & 용어

Renesas Electronics ISL84541IB ISL84541IBZ ISL84541IHZ-T MAX4541 MAX4541ESA+ MAX4542 MAX4543 MAX4544 DG9461 DG9262 DG9263 analog switch SPST interface IC semiconductor on resistance charge injection leakage current turn-on time turn-off time single-supply operation 8-SOIC SOIC package family surface-mount device battery-powered equipment
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기