KSZ8851-16MLLU - 10/100 Ethernet Controller | Microchip
N.º da peça: KSZ8851-16MLLU ✓ AtivoKSZ8851-16MLLU Visão geral
An Ethernet MAC controller is an interface IC that connects a host processor to an Ethernet physical layer. The MAC portion manages frame processing and host-interface transactions, while the integrated PHY provides the electrical connection to a 10BASE-T or 100BASE-TX network. Together, these functions add wired network connectivity to embedded systems without requiring a separate Ethernet transceiver.
The KSZ8851-16MLLU is intended for cost-effective, high-throughput Ethernet designs using conventional embedded processors rather than PCI-based host systems. Its 16-bit parallel interface provides a direct processor connection, while the family also supports SPI and other non-PCI interface configurations. The device is offered in 32-, 48-, and 128-pin package options within the KSZ8851 family, with the selected 48-LQFP configuration balancing functional capability and board-space requirements.
Analog signal transmission and reception are part of the integrated PHY design, allowing the controller to support physical-network connectivity without a discrete PHY. The automotive-qualified MLLU variant is relevant to vehicle and other automotive electronics platforms where environmental qualification and product traceability are required. The manufacturer datasheet identifies the design as compliant with applicable IEEE 802.3 standards.
Typical uses include automotive body, infotainment, telematics, and gateway modules, along with industrial Ethernet controllers, embedded network equipment, and communication appliances. The 10/100 capability is appropriate for legacy and cost-sensitive networks where gigabit Ethernet is unnecessary, while the parallel host interface can simplify integration with processors that do not provide Ethernet MAC/PHY peripherals.
PCB design should follow the manufacturer’s package, decoupling, clock, and analog-impedance guidance. The Ethernet differential pair requires careful routing and controlled impedance, and power and ground connections must be kept stable around the integrated analog and digital sections. Confirm the exact pin assignments, resistor values, and external components in the KSZ8851-16MLL datasheet before finalizing the PCB.
This page combines package, interface, qualification, comparison, replacement, and design guidance to support component selection and PCB planning. It focuses on the KSZ8851-16MLLU automotive 48-LQFP configuration and distinguishes it from temperature-grade, interface, and packaging variants that may otherwise appear similar in catalog searches.
Alternativas drop-in para KSZ8851-16MLLU — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com KSZ8851-16MLLU (mesmo formato e footprint) — diferindo em Ethernet Speed, Host Interface, Package, Temperature Grade.
KSZ8851-16MLL
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
KSZ8851-16MLLI
✅ Drop-InConsulte o preço
Ver ficha técnica →KSZ8851-16MLLU Especificações
| Product Type | Single-port Ethernet MAC controller with integrated PHY |
| Ethernet Speed | 10/100 Mb/s |
| Host Interface | 16-bit parallel non-PCI |
| Encapsulamento | 48-LQFP, 7 mm x 7 mm |
| Operating Supply Options | 1.8 V, 2.5 V, or 3.3 V |
| Ethernet Standards | Applicable IEEE 802.3 standards |
| Automotive Qualification | AEC-Q100 qualified |
| Temperature Grade | Automotive grade |
| Integrated PHY | Yes |
| Physical Network Support | 10BASE-T and 100BASE-TX |
| Port Count | 1 Ethernet port |
| Tipo de montagem | Surface mount |
| Contagem de pinos | 48 pins |
| Status RoHS | unknown |
| REACH Status | unknown |
| Lead-Free Status | unknown |
Guia de Configuração de Pinos do KSZ8851-16MLLU 48-lqfp, 7 mm x 7 mm
Configuração de pinos para KSZ8851-16MLLU (pacote 48-lqfp, 7 mm x 7 mm). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.
Nenhum dado detalhado de pinagem disponível para KSZ8851-16MLLU.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
KSZ8851-16MLLU é adequado para 6 aplicaçãos: Automotive Telematics Control Unit, Vehicle Infotainment Ethernet Gateway, Industrial Embedded Network Controller, Security Camera Network Interface, Building and Automation Gateway, Portable Diagnostic and Test Device.
Automotive Telematics Control Unit
The KSZ8851-16MLLU fits an automotive telematics control unit that must connect a host processor to a 10/100 Mb/s vehicle-network segment. Its integrated Ethernet MAC and PHY avoid a separate physical-layer device, while the 16-bit parallel non-PCI interface supports processors without an integrated Ethernet controller. The 48-LQFP package limits board area, and the AEC-Q100-qualified ordering code supports automotive qualification requirements. The design should follow the manufacturer’s reference network, magnetic-component, decoupling, and differential-routing guidance from datasheet DS00002357B.
Recomendado
Vehicle Infotainment Ethernet Gateway
The KSZ8851-16MLLU can provide the Ethernet attachment between an infotainment host processor and a 10/100 Mb/s internal network. The integrated PHY reduces the component count compared with a separated MAC and PHY implementation, while the 16-bit parallel host bus supports efficient transfers through the controller’s dynamic memory pointer. In a gateway requiring multiple network segments, the part may sit beside a dedicated switching device. Automotive qualification, clocking, power sequencing, and controlled-impedance routing must be addressed before production release.
Recomendado
Industrial Embedded Network Controller
The KSZ8851-16MLLU is suitable for an embedded industrial controller that needs deterministic 10/100 Mb/s Ethernet without a PCI bus. Its parallel non-PCI interface can connect directly to a microcontroller or application processor, while the integrated PHY consolidates the network front end. The controller is appropriate for equipment where Ethernet remains the preferred network speed and the design budget favors integration. If AEC-Q100 qualification is unnecessary, KSZ8851-16MLLI may provide a more closely matched environmental grade. Network magnetics and signal routing should follow the manufacturer reference design.
Recomendado
Security Camera Network Interface
The KSZ8851-16MLLU can serve as the wired-network interface in an IP camera or edge security device that transmits encoded video over 10/100 Mb/s Ethernet. The integrated MAC and PHY provide a compact implementation for a space-constrained embedded board, and the 16-bit parallel interface offers a direct path to an image-processing processor. Designers should allocate adequate bandwidth for the selected video stream, isolate analog clocking as required, and preserve controlled impedance on the Ethernet pair. The manufacturer datasheet should guide magnetics and differential-pair layout.
Recomendado
Building and Automation Gateway
The KSZ8851-16MLLU supports a building-automation gateway that bridges an embedded controller to 10/100 Mb/s Ethernet equipment. The 16-bit non-PCI host interface permits integration with processors that lack a dedicated Ethernet MAC, and the integrated PHY reduces the external Ethernet component count. The controller can complement a switching platform when several wired endpoints must share access to a host processor. Productization should address electromagnetic compatibility, isolation requirements, surge exposure, and updated network compliance. The 48-LQFP land pattern and component layout must be checked against the manufacturer drawing.
Recomendado
Portable Diagnostic and Test Device
The KSZ8851-16MLLU can add wired Ethernet connectivity to a portable diagnostic instrument or field-service device built around an embedded processor. A 10/100 Mb/s link provides a practical maintenance and data-transfer path without imposing a higher-speed PHY design on a battery-powered product. The integrated MAC and PHY keep the peripheral footprint compact, although power-consumption budgeting remains essential for portable equipment. Engineers should account for interface voltage selection, clock and reset behavior, Ethernet magnetics, and controlled-impedance routing using the manufacturer application guidance.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para KSZ8851-16MLLU — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | KSZ8851-16MLL | KSZ8851-16MLLI |
|---|---|---|---|
| Package | 48-LQFP (7 mm x 7 mm) | 48-LQFP (7 mm x 7 mm) | 48-LQFP (7 mm x 7 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Ethernet Speed | 10/100 Mb/s | 10/100 Mb/s | 10/100 Mb/s |
| Host Interface | 16-bit parallel non-PCI | 8-bit or 16-bit parallel non-PCI | 8-bit or 16-bit parallel non-PCI |
| Integrated PHY | Yes | Yes | Yes |
| Operating Supply Options | 1.8 V, 2.5 V, or 3.3 V | 1.8 V, 2.5 V, or 3.3 V | 1.8 V, 2.5 V, or 3.3 V |
| Qualification Grade | AEC-Q100 automotive grade | Base grade | Industrial-temperature grade |
| Ethernet Standard | Applicable IEEE 802.3 standards | Applicable IEEE 802.3 standards | Applicable IEEE 802.3 standards |
| Port Count | 1 Ethernet port | 1 Ethernet port | 1 Ethernet port |
Principais diferenciais
- Automotive qualification within the 16-bit, 48-LQFP controller family (vs KSZ8851-16MLLI)
- Automotive qualification without changing the documented 48-LQFP footprint (vs KSZ8851-16MLL)
- Integrated 10/100 Ethernet front end (vs KSZ8851-16MLL)
Notas de projeto
Route the Ethernet differential pair as a controlled-impedance transmission line and keep it away from clocks, switching regulators, and unrelated high-speed signals. Place the PHY-side network magnetics and termination components close to the controller-side connection points. Use the component placement and high-speed layout guidance in Microchip datasheet DS00002357B and the associated application material rather than relying on a generic Ethernet reference layout.
Assign every one of the 48 LQFP positions from the KSZ8851-16MLLU pin-description table, including power, ground, interface, clock, and reserved connections. Confirm the exposed-package treatment and thermal requirements from the package drawing. Because related KSZ8851 variants use the same family but may differ in interface or qualification details, verify the exact MLLU pinout rather than copying a generic 48-LQFP land pattern.
Separate the supply requirements of the digital host interface, MAC logic, and integrated analog PHY before selecting decoupling components. Place bulk and high-frequency capacitors close to their associated power pins, and provide clean return paths beneath the device. Use the voltage configuration and reference network in datasheet DS00002357B to determine which supply options are required; not every listed interface voltage must be connected in a specific design.
Informações de conformidade
Microchip datasheet DS00002357B identifies KSZ8851-16MLLU as an AEC-Q100-qualified automotive version. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not established from the manufacturer page or datasheet excerpt.