Microchip Technology

KSZ8851-16MLLU - 10/100 Ethernet Controller | Microchip

MPN: KSZ8851-16MLLU ✓ فعال
1.8 V, 2.5 V, or 3.3 V Vdss Applicable IEEE 802.3 standards Rds(on) 48-LQFP, 7 mm x 7 mm Package 10/100 Mb/s Speed
MOQ: 1 |

KSZ8851-16MLLU جائزہ

The Microchip Technology KSZ8851-16MLLU is a single-port 10/100 Ethernet MAC controller with an integrated Ethernet PHY and a 16-bit parallel non-PCI host interface, supplied in a 48-LQFP package. It supports 1.8 V, 2.5 V, and 3.3 V interface operation and is the AEC-Q100-qualified automotive version of the KSZ8851-16MLL family.

An Ethernet MAC controller is an interface IC that connects a host processor to an Ethernet physical layer. The MAC portion manages frame processing and host-interface transactions, while the integrated PHY provides the electrical connection to a 10BASE-T or 100BASE-TX network. Together, these functions add wired network connectivity to embedded systems without requiring a separate Ethernet transceiver.

The KSZ8851-16MLLU is intended for cost-effective, high-throughput Ethernet designs using conventional embedded processors rather than PCI-based host systems. Its 16-bit parallel interface provides a direct processor connection, while the family also supports SPI and other non-PCI interface configurations. The device is offered in 32-, 48-, and 128-pin package options within the KSZ8851 family, with the selected 48-LQFP configuration balancing functional capability and board-space requirements.

Analog signal transmission and reception are part of the integrated PHY design, allowing the controller to support physical-network connectivity without a discrete PHY. The automotive-qualified MLLU variant is relevant to vehicle and other automotive electronics platforms where environmental qualification and product traceability are required. The manufacturer datasheet identifies the design as compliant with applicable IEEE 802.3 standards.

Typical uses include automotive body, infotainment, telematics, and gateway modules, along with industrial Ethernet controllers, embedded network equipment, and communication appliances. The 10/100 capability is appropriate for legacy and cost-sensitive networks where gigabit Ethernet is unnecessary, while the parallel host interface can simplify integration with processors that do not provide Ethernet MAC/PHY peripherals.

PCB design should follow the manufacturer’s package, decoupling, clock, and analog-impedance guidance. The Ethernet differential pair requires careful routing and controlled impedance, and power and ground connections must be kept stable around the integrated analog and digital sections. Confirm the exact pin assignments, resistor values, and external components in the KSZ8851-16MLL datasheet before finalizing the PCB.

This page combines package, interface, qualification, comparison, replacement, and design guidance to support component selection and PCB planning. It focuses on the KSZ8851-16MLLU automotive 48-LQFP configuration and distinguishes it from temperature-grade, interface, and packaging variants that may otherwise appear similar in catalog searches.

کے لیے ڈراپ اِن متبادل KSZ8851-16MLLU — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں KSZ8851-16MLLU (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Ethernet Speed, Host Interface, Package, Temperature Grade.

Microchip Technology
Ethernet Speed: 10 Mbps to 100 Mbps
Host Interface: 8-bit or 16-bit generic non-PCI CPU interface
Package: 48-LQFP, 7 x 7 mm
موازنہ کریں KSZ8851-16MLLU →

KSZ8851-16MLL

✅ ڈراپ-اِن
📦 48-LQFP (7 mm x 7 mm)
Same 10/100 Ethernet, 16-bit non-PCI interface, and 48-LQFP family configuration; base qualification instead of the MLLU automotive grade

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

KSZ8851-16MLLI

✅ ڈراپ-اِن
Microchip Technology
📦 48-LQFP (7 mm x 7 mm)
Single-port Ethernet MAC controller with integrated 10/100 Base-T/TX PHY · 10 Mbps to 100 Mbps · 8-bit or 16-bit generic non-PCI CPU interface · 3.3 V · 48-LQFP, 7 x 7 mm · 48 pins

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

KSZ8851-16MLLU تفصیلات

Product Type Single-port Ethernet MAC controller with integrated PHY
Ethernet Speed 10/100 Mb/s
Host Interface 16-bit parallel non-PCI
پیکیج 48-LQFP, 7 mm x 7 mm
Operating Supply Options 1.8 V, 2.5 V, or 3.3 V
Ethernet Standards Applicable IEEE 802.3 standards
Automotive Qualification AEC-Q100 qualified
Temperature Grade Automotive grade
Integrated PHY Yes
Physical Network Support 10BASE-T and 100BASE-TX
Port Count 1 Ethernet port
ماؤنٹنگ ٹائپ Surface mount
پن کی تعداد 48 pins
RoHS اسٹیٹس unknown
REACH Status unknown
Lead-Free Status unknown

KSZ8851-16MLLU 48-lqfp, 7 mm x 7 mm پن کنفیگریشن گائیڈ

KSZ8851-16MLLU (48-lqfp, 7 mm x 7 mm پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔

KSZ8851-16MLLU کے لیے 48-lqfp, 7 mm x 7 mm پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں KSZ8851-16MLLU.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

KSZ8851-16MLLU کے لیے موزوں ہے 6 ایپلیکیشنs: Automotive Telematics Control Unit, Vehicle Infotainment Ethernet Gateway, Industrial Embedded Network Controller, Security Camera Network Interface, Building and Automation Gateway, Portable Diagnostic and Test Device.

🚗

Automotive Telematics Control Unit

The KSZ8851-16MLLU fits an automotive telematics control unit that must connect a host processor to a 10/100 Mb/s vehicle-network segment. Its integrated Ethernet MAC and PHY avoid a separate physical-layer device, while the 16-bit parallel non-PCI interface supports processors without an integrated Ethernet controller. The 48-LQFP package limits board area, and the AEC-Q100-qualified ordering code supports automotive qualification requirements. The design should follow the manufacturer’s reference network, magnetic-component, decoupling, and differential-routing guidance from datasheet DS00002357B.

🎥

Vehicle Infotainment Ethernet Gateway

The KSZ8851-16MLLU can provide the Ethernet attachment between an infotainment host processor and a 10/100 Mb/s internal network. The integrated PHY reduces the component count compared with a separated MAC and PHY implementation, while the 16-bit parallel host bus supports efficient transfers through the controller’s dynamic memory pointer. In a gateway requiring multiple network segments, the part may sit beside a dedicated switching device. Automotive qualification, clocking, power sequencing, and controlled-impedance routing must be addressed before production release.

🏭

Industrial Embedded Network Controller

The KSZ8851-16MLLU is suitable for an embedded industrial controller that needs deterministic 10/100 Mb/s Ethernet without a PCI bus. Its parallel non-PCI interface can connect directly to a microcontroller or application processor, while the integrated PHY consolidates the network front end. The controller is appropriate for equipment where Ethernet remains the preferred network speed and the design budget favors integration. If AEC-Q100 qualification is unnecessary, KSZ8851-16MLLI may provide a more closely matched environmental grade. Network magnetics and signal routing should follow the manufacturer reference design.

🎥

Security Camera Network Interface

The KSZ8851-16MLLU can serve as the wired-network interface in an IP camera or edge security device that transmits encoded video over 10/100 Mb/s Ethernet. The integrated MAC and PHY provide a compact implementation for a space-constrained embedded board, and the 16-bit parallel interface offers a direct path to an image-processing processor. Designers should allocate adequate bandwidth for the selected video stream, isolate analog clocking as required, and preserve controlled impedance on the Ethernet pair. The manufacturer datasheet should guide magnetics and differential-pair layout.

🧩

Building and Automation Gateway

The KSZ8851-16MLLU supports a building-automation gateway that bridges an embedded controller to 10/100 Mb/s Ethernet equipment. The 16-bit non-PCI host interface permits integration with processors that lack a dedicated Ethernet MAC, and the integrated PHY reduces the external Ethernet component count. The controller can complement a switching platform when several wired endpoints must share access to a host processor. Productization should address electromagnetic compatibility, isolation requirements, surge exposure, and updated network compliance. The 48-LQFP land pattern and component layout must be checked against the manufacturer drawing.

🔧

Portable Diagnostic and Test Device

The KSZ8851-16MLLU can add wired Ethernet connectivity to a portable diagnostic instrument or field-service device built around an embedded processor. A 10/100 Mb/s link provides a practical maintenance and data-transfer path without imposing a higher-speed PHY design on a battery-powered product. The integrated MAC and PHY keep the peripheral footprint compact, although power-consumption budgeting remains essential for portable equipment. Engineers should account for interface voltage selection, clock and reset behavior, Ethernet magnetics, and controlled-impedance routing using the manufacturer application guidance.

What is the KSZ8851-16MLLU?
The KSZ8851-16MLLU is a Microchip Technology single-port Ethernet MAC controller with an integrated 10/100 Base-T/TX PHY and a 16-bit parallel non-PCI host interface. It is packaged in a 48-LQFP measuring 7 mm by 7 mm and is the AEC-Q100-qualified automotive version of the KSZ8851-16MLL family. According to Microchip datasheet DS00002357B, the device adds cost-effective Ethernet connectivity to traditional embedded processor systems.
What are the key specifications of KSZ8851-16MLLU that engineers should know?
The KSZ8851-16MLLU combines a 10/100 Mb/s Ethernet MAC, integrated Ethernet PHY, and 16-bit parallel non-PCI host interface in a 48-LQFP package. It supports 1.8 V, 2.5 V, and 3.3 V operation, is qualified to AEC-Q100, and is designed for applicable IEEE 802.3 networks. Microchip datasheet DS00002357B identifies it as an automotive-grade member of the broader KSZ8851 family.
Where can I download the KSZ8851-16MLLU datasheet PDF?
The KSZ8851-16MLLU datasheet PDF is available from Microchip Technology through the official DS00002357B document link listed on this page. It covers the KSZ8851-16MLL, KSZ8851-16MLLI, and KSZ8851-16MLLU variants, including the 8-bit or 16-bit non-PCI interface configuration. Use its pin-description table and application diagrams when assigning PCB tracks and selecting external components.
Where can I find the KSZ8851-16MLLU pinout?
The authoritative KSZ8851-16MLLU pin assignment is shown in the pin-description and package diagrams in Microchip datasheet DS00002357B. The selected device uses a 48-LQFP package, so all 48 package positions must be checked against that table when assigning power, ground, interface, clock, and Ethernet signals. Do not rely on a generic 48-LQFP symbol because adjacent signal functions can differ between KSZ8851 configurations.
Is the KSZ8851-16MLLU suitable for automotive Ethernet applications?
Yes, the KSZ8851-16MLLU is the AEC-Q100-qualified automotive version of the KSZ8851-16MLL family. It provides a single-port 10/100 Mb/s Ethernet MAC with an integrated PHY and a 16-bit parallel host interface. Microchip datasheet DS00002357B distinguishes the MLLU automotive version from the MLLI industrial-temperature version and the MLL base device, allowing qualification status to guide platform selection.
What is the difference between KSZ8851-16MLLU and KSZ8851-16MLL?
The principal documented difference is qualification: KSZ8851-16MLLU is the AEC-Q100-qualified automotive version, while KSZ8851-16MLL is the base version. Both belong to the 16-bit, 48-LQFP KSZ8851 configuration described in Microchip datasheet DS00002357B. For an existing automotive PCB, confirm every pin, supply, clock, and external-component requirement before treating either ordering code as an interchangeable replacement.
What is the difference between KSZ8851-16MLLU and KSZ8851-16MLLI?
KSZ8851-16MLLU is qualified to AEC-Q100 for automotive applications, whereas KSZ8851-16MLLI is the industrial-temperature version of the same 16-bit controller family. Both are described in Microchip datasheet DS00002357B and use the 48-LQFP configuration. Select the MLLU ordering code when automotive qualification is required; otherwise, the MLLI version may fit the environmental requirement.
When should I choose KSZ8851-16MLLU over KSZ8851-16MLLI?
Choose KSZ8851-16MLLU when the product requires the AEC-Q100-qualified automotive version of the controller. Choose KSZ8851-16MLLI when an industrial-temperature grade is sufficient and the design does not require automotive qualification. Both share the documented 10/100 Ethernet, integrated-PHY, and 16-bit parallel-interface architecture, so qualification and operating-environment requirements should drive the decision.
Is KSZ8851-16MLLU suitable for industrial embedded networking?
The KSZ8851-16MLLU can provide 10/100 Mb/s wired networking for embedded systems, but its AEC-Q100 qualification is specifically relevant to automotive applications. Industrial designs that do not require automotive qualification should compare the MLLI industrial-temperature ordering code against the MLLU version. Both use the same 16-bit, 48-LQFP controller family described in Microchip datasheet DS00002357B.
Can KSZ8851-16MLLU replace KSZ8851-16MLL?
The KSZ8851-16MLLU can serve as the automotive-qualified version of the KSZ8851-16MLL design, but substitution still requires board-level confirmation. Microchip datasheet DS00002357B groups the MLL, MLLI, and MLLLU variants under the 16-bit controller family. Before replacement, verify the exact package, pin functions, clock requirements, supplies, exposed connections, and external component values against the datasheet.
What is the best drop-in replacement for KSZ8851-16MLLU?
The closest documented same-package alternatives are KSZ8851-16MLL and KSZ8851-16MLLI because Microchip datasheet DS00002357B presents them as members of the same 48-LQFP, 16-bit non-PCI controller family. Their qualification differs: MLLU is AEC-Q100 qualified, while MLLI is industrial-temperature grade. A cross-manufacturer drop-in replacement was not identified, so no substitute should be assumed without a complete footprint, timing, and electrical review.
What can replace KSZ8851-16MLLU?
KSZ8851-16MLL and KSZ8851-16MLLI are the closest documented replacements for an existing KSZ8851-16MLLU PCB because they share the 16-bit, 48-LQFP family architecture in Microchip datasheet DS00002357B. The MLLU remains preferable when AEC-Q100 automotive qualification is mandatory. No verified cross-brand, pin-compatible replacement was identified, making a functional substitute unsuitable without a redesign and new qualification effort.
Is KSZ8851-16MLLU the same as KSZ8851-16MLLU-TR?
KSZ8851-16MLLU and KSZ8851-16MLLU-TR identify the same electrical device family, but the ordering codes differ in their packaging or delivery designation. The TR version is distributed in tape-and-reel form, whereas the non-TR version is associated with tray presentation. Verify the ordering code with the manufacturer’s packing information before treating the two labels as identical procurement items.
Where can I buy KSZ8851-16MLLU and how do I request a quote?
The KSZ8851-16MLLU can be sourced through the XAIPART Request a Quote form on this page. The form is the appropriate route for current commercial terms, stock confirmation, lead time, and order volume. Because commercial conditions can change, request the quote for the exact 48-LQFP MPN and confirm whether a tray or tape-and-reel delivery code is required.
How much does KSZ8851-16MLLU cost and what is its lead time?
Use the XAIPART Request a Quote form on this page for the current KSZ8851-16MLLU price, stock position, lead time, and minimum order quantity. Quote-based ordering avoids presenting stale commercial terms as fixed conditions. Include the target quantity, delivery packaging preference, automotive qualification requirements, and destination country so the supply response can reflect the complete procurement request.
Does the KSZ8851-16MLLU need an external Ethernet PHY?
No external Ethernet PHY is required for the primary Ethernet connection because the KSZ8851-16MLLU includes an integrated 10/100 Base-T/TX PHY. Microchip datasheet DS00002357B describes the controller as combining the Ethernet MAC and physical-layer functions. External network-interface magnetics, termination, filtering, and other application-circuit components must still be implemented according to the reference design and layout guidance.

کے لیے انجینئرنگ ریفرنس ڈیٹا KSZ8851-16MLLU — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose KSZ8851-16MLLU for automotive embedded networking when the design requires the AEC-Q100-qualified member of the 16-bit KSZ8851 controller family. Its integrated 10/100 Mb/s Ethernet PHY, parallel non-PCI host interface, and 48-LQFP package make it appropriate for space-constrained vehicle, gateway, and telematics platforms. Choose KSZ8851-16MLLI when industrial-temperature qualification is sufficient and automotive qualification is unnecessary; the core Ethernet and interface architecture remains the same. Choose KSZ8851-16MLL when the base grade is acceptable or when supply or lifecycle considerations favor that ordering code. No verified cross-brand drop-in equivalent was identified, so a competitor device should not be treated as a footprint-compatible substitution without a formal electrical, timing, and software review.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ KSZ8851-16MLL KSZ8851-16MLLI
Package 48-LQFP (7 mm x 7 mm) 48-LQFP (7 mm x 7 mm) 48-LQFP (7 mm x 7 mm)
Brand Microchip Technology Microchip Technology Microchip Technology
Ethernet Speed 10/100 Mb/s 10/100 Mb/s 10/100 Mb/s
Host Interface 16-bit parallel non-PCI 8-bit or 16-bit parallel non-PCI 8-bit or 16-bit parallel non-PCI
Integrated PHY Yes Yes Yes
Operating Supply Options 1.8 V, 2.5 V, or 3.3 V 1.8 V, 2.5 V, or 3.3 V 1.8 V, 2.5 V, or 3.3 V
Qualification Grade AEC-Q100 automotive grade Base grade Industrial-temperature grade
Ethernet Standard Applicable IEEE 802.3 standards Applicable IEEE 802.3 standards Applicable IEEE 802.3 standards
Port Count 1 Ethernet port 1 Ethernet port 1 Ethernet port

اہم امتیازی خصوصیات

  • Automotive qualification within the 16-bit, 48-LQFP controller family (بمقابلہKSZ8851-16MLLI)
  • Automotive qualification without changing the documented 48-LQFP footprint (بمقابلہKSZ8851-16MLL)
  • Integrated 10/100 Ethernet front end (بمقابلہKSZ8851-16MLL)

ڈیزائن نوٹس

Route the Ethernet differential pair as a controlled-impedance transmission line and keep it away from clocks, switching regulators, and unrelated high-speed signals. Place the PHY-side network magnetics and termination components close to the controller-side connection points. Use the component placement and high-speed layout guidance in Microchip datasheet DS00002357B and the associated application material rather than relying on a generic Ethernet reference layout.

Assign every one of the 48 LQFP positions from the KSZ8851-16MLLU pin-description table, including power, ground, interface, clock, and reserved connections. Confirm the exposed-package treatment and thermal requirements from the package drawing. Because related KSZ8851 variants use the same family but may differ in interface or qualification details, verify the exact MLLU pinout rather than copying a generic 48-LQFP land pattern.

Separate the supply requirements of the digital host interface, MAC logic, and integrated analog PHY before selecting decoupling components. Place bulk and high-frequency capacitors close to their associated power pins, and provide clean return paths beneath the device. Use the voltage configuration and reference network in datasheet DS00002357B to determine which supply options are required; not every listed interface voltage must be connected in a specific design.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

Microchip datasheet DS00002357B identifies KSZ8851-16MLLU as an AEC-Q100-qualified automotive version. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not established from the manufacturer page or datasheet excerpt.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-18 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

ksz8851 16mll ksz8851 datasheet ksz8851 eval board ksz8851 16mlli ksz8851 pdf ksz8851 16mql microchip ksz8851 micrel ksz8851 KSZ8851-16MLLU datasheet KSZ8851-16MLLU pinout KSZ8851-16MLLU equivalent KSZ8851-16MLLU replacement KSZ8851-16MLLU price KSZ8851-16MLLU application circuit

متعلقہ اجزاء اور اصطلاحات

Microchip Technology KSZ8851 KSZ8851-16MLLU KSZ8851-16MLL KSZ8851-16MLLI Ethernet MAC controller Ethernet PHY interface IC network interface controller 10BASE-T 100BASE-TX IEEE 802.3 16-bit parallel interface non-PCI host interface 48-LQFP LQFP package family surface-mount package SMD AEC-Q100 automotive electronics industrial Ethernet Ethernet magnetics controlled impedance dynamic memory pointer
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں