Lattice Semiconductor

LC4064B-75T44I - 64-Macrocell 7.5ns CPLD | Lattice Semiconductor

N.º da peça: LC4064B-75T44I ✗ Fim de vida
2.5 V Vdss 44-pin TQFP, 10 x 10 mm Package 168 MHz Speed Nonvolatile Memory
MOQ: 1 |

LC4064B-75T44I Visão geral

The Lattice Semiconductor LC4064B-75T44I is a 64-macrocell in-system programmable complex programmable logic device with a 7.5 ns maximum propagation delay, operating from a 2.5 V supply in a 44-pin TQFP package. It belongs to the ispMACH 4000B family, which combines programmable logic, registers, and dedicated resources for compact, high-speed control and interface designs.

A complex programmable logic device, or CPLD, is a programmable digital semiconductor that sits between fixed-function logic and an FPGA in the design hierarchy. A CPLD combines a programmable AND-array with a programmable OR-array, providing deterministic routing, nonvolatile configuration storage, and fast logic implementation without an external configuration device. The ispMACH 4000B architecture places 64 macrocells in four logic array blocks for designs requiring moderate logic density and high pin-to-pin performance.

Key characteristics include 64 macrocells, four logic array blocks, a 7.5 ns speed grade, and 2.5 V operation. The 44-TQFP surface-mount package provides 44 external connections for power, configuration, clock, and user I/O. In-system programming allows the device to be configured through its programming interface without removing it from the circuit, supporting production programming, field updates, and prototype reconfiguration.

The LC4064B-75T44I is suited to designs where predictable propagation delay and compact implementation are more important than very high logic density. Its macrocell-based architecture supports combinational and registered logic, state machines, bus arbitration, address decoding, interface control, and low-latency glue logic. Device configuration is retained in nonvolatile memory, so the implemented logic remains available after power is removed and re-applied.

Typical uses include industrial control modules, peripheral controllers, data-acquisition front ends, communication equipment, and embedded system support logic. The 7.5 ns grade is appropriate for synchronous control paths and moderately clocked interfaces, while the 64-macrocell capacity provides room for decoding, handshake logic, and state-machine implementations. Its industrial-temperature ordering option also suits equipment designed for extended environmental duty.

Designers should confirm the exact supply-voltage range, pin-level I/O limits, configuration timing, and unused-pin requirements in the Lattice Semiconductor datasheet and package drawing. PCB layout should provide a short, continuous ground plane, decouple each supply rail locally, and route configuration and clock signals away from noisy switching nodes. Use the ispMACH implementation flow and timing constraints to validate every registered path before programming hardware.

This page combines the verified device identity, package information, architecture details, replacement candidates, comparison parameters, and practical design guidance in one engineering-focused reference. It also highlights where engineers must consult the original manufacturer documentation for exact pin assignments, timing tables, and power specifications.

Alternativas drop-in para LC4064B-75T44I — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com LC4064B-75T44I (mesmo formato e footprint) — diferindo em Architecture, Product Family, Package, Configuration Memory, Core Supply Voltage.

Lattice Semiconductor
Architecture: SuperFAST high-density PLD
Package: 44-pin TQFP
Configuration Memory: Non-volatile
Comparar com LC4064B-75T44I →
Lattice Semiconductor
Architecture: ispMACH 4000 SuperFAST architecture
Product Family: ispMACH 4000C
Package: 44-pin TQFP
Comparar com LC4064B-75T44I →
Lattice Semiconductor
Architecture: Blend of ispLSI 2000 and ispMACH 4A architectures
Product Family: ispMACH 4000V
Package: 44-pin TQFP
Comparar com LC4064B-75T44I →

LC4064C-75T44I

✅ Drop-In
Lattice Semiconductor
📦 44-TQFP
Complex Programmable Logic Device (CPLD) · ispMACH 4000C · ispMACH 4000 SuperFAST architecture · 64 macrocells · 168 MHz · -75 · 1.8 V · 3.3 V, 2.5 V, and 1.8 V

Consulte o preço

Ver ficha técnica →

LC4064V-75T44I

✅ Drop-In
Lattice Semiconductor
📦 44-TQFP
Complex programmable logic device (CPLD) · ispMACH 4000V · 64 macro cells · 168 MHz · -75 · 3.3 V, 2.5 V, and 1.8 V · In-system programmable · 30 I/O

Consulte o preço

Ver ficha técnica →

LC4064B-75TN44I

✅ Drop-In
📦 44-TQFP
Same 44-TQFP footprint, 7.5 ns speed grade, and 64-macrocell density; the ordering suffix differs by 0 ns in propagation delay and changes the orderable compliance or temperature designation.

📋 Alternativa de referência (fora do catálogo)

LC4064B-75T44C

✅ Drop-In ⚠️ Especificações não verificadas
Lattice Semiconductor
📦 44-TQFP
Complex Programmable Logic Device (CPLD) · ispMACH 4000B · SuperFAST high-density PLD · 64 macrocells · 168 MHz · -75 · 3.3 V / 2.5 V / 1.8 V · In-System Programmable (ISP)

Consulte o preço

Ver ficha técnica →

LC4064B-75TN44C

✅ Drop-In ⚠️ Especificações não verificadas
📦 44-TQFP
Same 44-TQFP footprint, 7.5 ns speed grade, and 64-macrocell density; N and C suffixes change ordering options while the stated 7.5 ns propagation delay is unchanged.

📋 Alternativa de referência (fora do catálogo)

LC4064B-75T44I Classificações máximas e características elétricas

Device Type Complex Programmable Logic Device (CPLD)
Product Family ispMACH 4000B
Macrocells 64 macrocells
Logic Array Blocks 4 logic array blocks
Maximum Propagation Delay 7.5 ns
Maximum Operating Frequency 168 MHz
Core Supply Voltage 2.5 V
Family Supply Voltage Options 1.8 V, 2.5 V, or 3.3 V
Programming In-system programmable
Configuration Memory Nonvolatile
Encapsulamento 44-pin TQFP, 10 x 10 mm
Tipo de montagem Surface mount
Contagem de pinos 44 pins
Operating Temperature Grade Industrial grade

Guia de Configuração de Pinos do LC4064B-75T44I 44-pin tqfp, 10 x 10 mm

Configuração de pinos para LC4064B-75T44I (pacote 44-pin tqfp, 10 x 10 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 44-pin tqfp, 10 x 10 mm para LC4064B-75T44I

Nenhum dado detalhado de pinagem disponível para LC4064B-75T44I.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

LC4064B-75T44I é adequado para 6 aplicaçãos: Industrial Control and Automation, Data-Acquisition Front End, Peripheral Interface and Bus Bridging, Communication Equipment Control Plane, Programmable Relay and Power Sequencing, Compact Embedded System Support Logic.

🏭

Industrial Control and Automation

The LC4064B-75T44I fits industrial control modules that require deterministic decoding, sequencing, and state-machine logic around a microcontroller or processor. Its 64 macrocells provide capacity for address decoding, interlock evaluation, relay-command sequencing, and watchdog handling, while the 7.5 ns maximum propagation delay supports moderately timed control paths. Nonvolatile configuration means the control logic survives power cycling without an external boot flash. The industrial-grade ordering option should be checked against the enclosure temperature range, and decoupling plus grounded return paths are essential when the module also includes switching relays or power converters.

📈

Data-Acquisition Front End

The LC4064B-75T44I can implement channel multiplexing, sample-and-hold timing, trigger alignment, and data-format conversion in front of an ADC. The 168 MHz maximum family operating frequency and 7.5 ns propagation delay allow clocked pipelines and interface control without introducing the complexity of a large FPGA. Sixty-four macrocells are sufficient for control sequencing and register banks but not for extensive datapath storage, so high-speed data storage should remain with a dedicated ADC, FIFO, or FPGA. Keep the CPLD clock and configuration routing away from analog inputs to preserve signal integrity and predictable timing.

🔗

Peripheral Interface and Bus Bridging

The LC4064B-75T44I is useful for adapting slow legacy peripherals to a faster processor bus through address decode, read/write strobe generation, and interrupt-request control. Its 7.5 ns speed grade can support clocked handshake logic, while nonvolatile configuration simplifies standalone peripheral behavior after reset. The 44-pin package limits user I/O availability, so designers should count power, configuration, clock, and dedicated pins before committing to the device. Validate setup and hold times for the selected interface and use the Lattice timing constraints to ensure every registered path closes at the target clock.

🌐

Communication Equipment Control Plane

The LC4064B-75T44I can implement framing control, command parsing, CRC generation, and status sequencing in communication equipment while a dedicated processor handles higher-layer work. Its 64 macrocells provide enough room for compact state machines, buffer control, and programmable interrupt logic, and the 168 MHz family maximum supports clocked control paths. This device does not replace a high-speed transceiver or a large protocol processor, so analog and high-speed data paths should remain separate. Use controlled-impedance routing for clock signals and place configuration interfaces away from switching regulators to reduce susceptibility to noise-induced programming problems.

⚡

Programmable Relay and Power Sequencing

The LC4064B-75T44I can coordinate relay outputs, fault flags, timing sequences, and power-enable signals in programmable control hardware. Its 64 macrocells are well matched to sequential state machines and latched output banks, and the nonvolatile configuration allows the same sequence to run immediately after power restoration. A 7.5 ns propagation delay is more than adequate for electromechanical sequencing where millisecond-scale timing dominates. Confirm output drive ratings and isolation requirements in the datasheet, and provide flyback protection and separate return paths for inductive loads rather than routing them through CPLD pins.

🖥️

Compact Embedded System Support Logic

The LC4064B-75T44I can add glue logic, boot-status decoding, watchdog handling, and power-state management around a low-cost microcontroller or FPGA. Its in-system programming allows the same PCB to be programmed during production and updated in the field, while nonvolatile storage avoids an external configuration device. The 7.5 ns propagation delay is appropriate for synchronization, pulse stretching, and register-interface adaptation rather than demanding processor-class datapath work. Designers should check the exact user-I/O count and dedicated configuration pins, since the 44-pin package reserves a meaningful portion of its leads for power and programming.

Resumo dos produtos recomendados

STM32G431C8T6TR STMicroelectronics Usado em: Industrial Control and Automation ATMEGA32-16AU Microchip Technology Usado em: Industrial Control and Automation ADV7180WBTSZ Video or control interface benefiting from deterministic digital decoding Usado em: Data-Acquisition Front End ADV7280BCPZ-M Analog Devices Usado em: Data-Acquisition Front End MAX3221IPWR Texas Instruments Usado em: Peripheral Interface and Bus Bridging LAN7500I-ABZJ-TR Microchip Technology Usado em: Peripheral Interface and Bus Bridging KSZ8041MLL-TR Microchip Technology Usado em: Communication Equipment Control Plane W77L516AL25FL Interface controller operating alongside external CPLD logic Usado em: Communication Equipment Control Plane OPA1678 Precision amplifier for analog sensing around a controlled system Usado em: Programmable Relay and Power Sequencing TJA1057GTK/3Z NXP Semiconductors Usado em: Programmable Relay and Power Sequencing STM32G031K8T6TR Low-power microcontroller requiring deterministic support logic Usado em: Compact Embedded System Support Logic ATMEGA88A-CCU Microchip Technology Usado em: Compact Embedded System Support Logic
What is the LC4064B-75T44I?
The LC4064B-75T44I is a Lattice Semiconductor ispMACH 4000B complex programmable logic device with 64 macrocells, four logic array blocks, and a 7.5 ns maximum propagation delay. It is supplied in a 44-pin TQFP package and supports in-system programming. The device is intended for compact, high-speed digital control, interface, decoding, and state-machine implementations where nonvolatile configuration and deterministic logic behavior are important.
What are the key specifications of LC4064B-75T44I that engineers should know?
The LC4064B-75T44I combines 64 macrocells, four logic array blocks, a 7.5 ns maximum propagation delay, and a maximum operating frequency of 168 MHz in a 44-TQFP package. The ispMACH 4000B family supports 1.8 V, 2.5 V, and 3.3 V supply configurations, with this orderable specified at 2.5 V. It also provides in-system programming and nonvolatile configuration storage for field-updatable control logic.
Where can I download the LC4064B-75T44I datasheet PDF?
The LC4064B-75T44I datasheet PDF is available from the Lattice Semiconductor document listed as "ispMACH 4000V/B/C/Z Family" and from the component-specific datasheet listing. The manufacturer document is the authoritative source for pin assignments, DC characteristics, timing tables, configuration details, and package drawings. Use the Lattice Semiconductor datasheet rather than relying on an abbreviated distributor specification table when designing the PCB or evaluating timing.
Where is the LC4064B-75T44I pinout located?
The LC4064B-75T44I pinout is located in the pin-configuration section of the Lattice Semiconductor ispMACH 4000B datasheet. The device uses a 44-pin TQFP arrangement that includes power, ground, configuration, clock, and user I/O connections. Assign PCB nets from the exact datasheet pin table and package drawing, including the treatment of unused pins, rather than inferring connections from a package outline.
Can the LC4064B-75T44I be programmed in-circuit?
Yes, the LC4064B-75T44I supports in-system programming through the ispMACH configuration interface. This allows a finished board to be programmed or updated without removing the CPLD from its socket or PCB. Configuration data is retained in nonvolatile memory, so the configured logic is restored after power cycling. Programming voltage, interface timing, and pin-state requirements must be checked in the manufacturer datasheet.
Is the LC4064B-75T44I suitable for high-speed control logic?
The LC4064B-75T44I is suitable for moderate-speed control logic because its 7.5 ns grade supports a maximum operating frequency of 168 MHz. That performance fits synchronous state machines, address decoding, bus arbitration, and peripheral control paths. For designs requiring higher logic density, more registers, or substantially faster routing, evaluate an FPGA or a larger CPLD instead of relying on timing assumptions from the family maximum.
What is the difference between LC4064B-75T44I and LC4064C-75T44I?
The LC4064C-75T44I is a newer-generation member of the same ispMACH 4000 family and keeps the same 44-pin TQFP footprint and 7.5 ns ordering designation. The LC4064B-75T44I belongs to the 4000B generation, while the C designation identifies a revised device generation. Confirm programming-file support, timing improvements, and lifecycle conditions in the Lattice Semiconductor device documentation before using the newer part as a substitute.
What is the best drop-in replacement for LC4064B-75T44I?
The closest same-family drop-in candidates include the LC4064C-75T44I and LC4064V-75T44I because they use the same 44-pin TQFP arrangement and the same 7.5 ns ordering code. Device generation, supported supply configuration, configuration-file compatibility, and availability must still be confirmed before substitution. A footprint match alone does not guarantee that an existing bitstream can be loaded into a different family member.
Can LC4064V-75T44I replace LC4064B-75T44I?
LC4064V-75T44I is a potential drop-in replacement because the manufacturer states that ispMACH 4000 density devices in the same package maintain the same pinout, and both parts use a 44-pin TQFP with a 75 speed designation. Before replacing the LC4064B-75T44I, verify the operating voltage, timing characteristics, configuration interface, and bitstream compatibility. The device generation and internal architecture differ even when the land pattern is unchanged.
When should I choose the LC4064B-75T44I instead of a larger CPLD or FPGA?
Choose the LC4064B-75T44I when the design needs a modest amount of deterministic logic, a compact 44-pin footprint, and in-system programmability rather than very high logic density. Its 64 macrocells suit decoding, control, handshake, and state-machine functions, while the 7.5 ns speed grade supports moderately clocked logic. Choose an FPGA when the design requires more logic, dedicated RAM, DSP blocks, high-speed I/O, or a larger I/O count.
Is the LC4064B-75T44I suitable for industrial equipment?
The LC4064B-75T44I is ordered as an industrial-grade option, making it suitable for industrial control equipment when its documented environmental limits meet the deployment requirement. Verify the exact minimum and maximum operating temperatures, power limits, and qualification status in the datasheet. Industrial ordering alone does not establish AEC-Q100 qualification for automotive deployments, so automotive designs require separate verification.
How do LC4064B-75T44I and XC2C64A-5VQ100C differ?
The LC4064B-75T44I is a 64-macrocell ispMACH 4000B CPLD in a 44-pin TQFP, while the XC2C64A-5VQ100C is a 64-cell CPLD in a 100-pin VQFP package. Their package dimensions, I/O availability, speed grades, programming tools, and timing characteristics are therefore different. They are functional alternatives for certain CPLD designs, but they are not pin-compatible drop-in replacements and require separate PCB layouts and timing validation.
Where can I buy LC4064B-75T44I online?
LC4064B-75T44I can be requested through the Request a Quote form on this product page, which is the fastest route for checking current availability, order quantities, and delivery scheduling. Lattice Semiconductor also distributes the part through authorized channels, and the product listing identifies both DigiKey and Mouser references. Submit the exact MPN LC4064B-75T44I in the quote request so the package and industrial-grade suffix are not confused with similar family members.
What is the price of LC4064B-75T44I?
The current commercial price for LC4064B-75T44I is obtained through the Request a Quote form on this page, where current availability and volume pricing are handled directly. The LC4064B-75T44I is a legacy programmable-logic device, and commercial terms can vary with quantity, programming requirements, and supply status. Use the quote form with the exact 44-TQFP industrial-grade MPN rather than a generic LC4064 family code.
What is the lead time for LC4064B-75T44I?
The current lead time for LC4064B-75T44I should be confirmed through the Request a Quote form on this page. Because this is an older ispMACH 4000B programmable-logic product, availability may depend on the remaining manufacturer inventory rather than a short production cycle. Provide your required quantity, programming date, and annual usage in the request so the supplier can quote an appropriate schedule and confirm whether any sourcing allocation is needed.
Is LC4064B-75T44I in stock?
Current stock for LC4064B-75T44I is confirmed through the Request a Quote form on this page. The component is a legacy CPLD with an exact 44-TQFP package designation, so inventory status should be checked using the complete MPN. A confirmed order allocation is the appropriate way to verify availability for production use, especially when the design also requires programmed configuration files or a specific delivery schedule.

Dados de referência de engenharia para LC4064B-75T44I — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the LC4064B-75T44I when an existing design uses the ispMACH 4000B architecture, requires 64 macrocells, and targets the 7.5 ns speed grade in a 44-pin TQFP footprint. It is especially suitable for deterministic decoding, control sequencing, peripheral glue logic, and compact state machines that benefit from in-system programming and nonvolatile configuration. Use LC4064C-75T44I or LC4064V-75T44I when the land pattern and speed grade are the priorities but a different device generation offers preferred sourcing or feature revisions; confirm configuration-file compatibility first. Use LC4064B-75TN44I when its alternate ordering suffix matches the supply chain, and use the C-temperature variants only when the commercial temperature range satisfies the deployment. Do not treat the XC2C64A-5VQ100C as a drop-in replacement because its 100-pin VQFP footprint requires a different PCB layout, programming flow, and timing validation.

Comparação com alternativas

Parâmetro Este produto LC4064C-75T44I LC4064V-75T44I LC4064B-75TN44I LC4064B-75T44C LC4064B-75TN44C
Brand Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor
Package 44-TQFP 44-TQFP - same footprint 44-TQFP - same footprint 44-TQFP - same footprint 44-TQFP - same footprint 44-TQFP - same footprint
Device Family ispMACH 4000B ispMACH 4000C ispMACH 4000V ispMACH 4000B ispMACH 4000B ispMACH 4000B
Macrocells 64 macrocells 64 macrocells 64 macrocells 64 macrocells 64 macrocells 64 macrocells
Logic Array Blocks 4 logic array blocks 4 logic array blocks 4 logic array blocks 4 logic array blocks 4 logic array blocks 4 logic array blocks
Maximum Propagation Delay 7.5 ns 7.5 ns 7.5 ns 7.5 ns 7.5 ns 7.5 ns
Maximum Operating Frequency 168 MHz 168 MHz 168 MHz 168 MHz 168 MHz 168 MHz
Core Supply Voltage 2.5 V 2.5 V 2.5 V 2.5 V 2.5 V 2.5 V
Programming In-system programmable In-system programmable In-system programmable In-system programmable In-system programmable In-system programmable
Temperature Ordering Option Industrial grade Industrial grade Industrial grade Industrial grade Commercial grade Commercial grade

Principais diferenciais

  • Matches the 44-TQFP land pattern while preserving the 75 speed designation (vs LC4064V-75T44I)
  • Provides an exact same-density, same-speed family migration (vs LC4064B-75TN44I)
  • Combines 64 macrocells with a seven-nanosecond-class timing grade (vs LC4064B-75T44C)
  • Offers in-system programming and nonvolatile configuration in a 44-pin package (vs XC2C64A-5VQ100C)

Notas de projeto

Follow the Lattice Semiconductor ispMACH 4000B power-connection and decoupling instructions for the selected 2.5 V configuration. Place the required bulk and high-frequency capacitors at the device's supply pins with short return paths to the ground plane, and confirm that power-source impedance remains low enough for simultaneous switching activity. Estimate rail droop using the worst-case I/O toggle rate and specified output-current limits, then verify the transient response on a power bus with realistic board parasitics.

Assign every net from the exact 44-TQFP pin table in the manufacturer datasheet and use the package drawing for land patterns and exposed thermal requirements. Keep configuration signals, clock inputs, and user outputs away from high-current switching nodes and inductors. Route clock and configuration nets over a continuous ground reference where possible, and avoid routing them parallel to long power-conversion or motor-drive traces. PCB signal-integrity validation is especially important when configuration is performed after board assembly.

Do not assume that an identical 44-TQFP footprint guarantees interchangeable LC4064 devices. Before substituting another family member, verify the 2.5 V operating mode, user-I/O allocation, configuration pin requirements, macrocell resource mapping, timing constraints, and bitstream support in the Lattice Semiconductor design tool. Also distinguish the 44-pin device from LC4064 options in 48-pin, 100-pin, or 208-pin packages, which have different footprints and cannot be substituted without a PCB redesign.

Treat the device clock as a timing-critical net: use a short route, provide a continuous reference plane, avoid stubs, and place any series damping close to the source when edge rates are high. Add external filtering only after confirming that it does not violate configuration or clock-input timing. For interfaces crossing between the 2.5 V core domain and a different-voltage peripheral, use level translation with direction control; the LC4064B-75T44I's I/O structure and voltage tolerances must be confirmed in the datasheet.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The verified component information does not state RoHS, REACH, halogen-free, lead-free, conflict-minerals, or automotive qualification status. The industrial suffix does not establish AEC-Q100 qualification.

Buscas relacionadas

LC4064B-75T44I datasheet LC4064B-75T44I datasheet pdf LC4064B-75T44I pinout LC4064B-75T44I specifications LC4064B-75T44I equivalent LC4064B-75T44I replacement LC4064B-75T44I cross reference LC4064B-75T44I vs LC4064C-75T44I LC4064B-75T44I 44-TQFP footprint LC4064B-75T44I 64 macrocell CPLD LC4064B-75T44I price LC4064B-75T44I stock Lattice Semiconductor LC4064B-75T44I ispMACH 4000B 7.5ns CPLD LC4064B-75T44I industrial control logic

Componentes & termos relacionados

Lattice Semiconductor LC4064B-75T44I LC4064C-75T44I LC4064V-75T44I LC4064B-75TN44I LC4064B-75T44C LC4064B-75TN44C XC2C64A-5VQ100C ispMACH 4000B ispMACH 4000 family complex programmable logic device CPLD programmable AND array programmable OR array macrocell logic array block in-system programming nonvolatile configuration memory 7.5 ns propagation delay 168 MHz maximum operating frequency 2.5 V core supply 44-TQFP package TQFP package family surface-mount package industrial control state-machine logic bus decoding
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ