LFE2-50E-7F672C - 48K LUT ECP2 FPGA, 500 I/O | Lattice Semiconductor
N.º da peça: LFE2-50E-7F672C ✓ AtivoLFE2-50E-7F672C Visão geral
An FPGA is a programmable-logic semiconductor whose lookup tables, registers, interconnect resources, memory blocks, and programmable I/O are configured after fabrication. The LFE2-50E-7F672C belongs to the Lattice ECP2 family, where programmable logic provides a practical alternative to a custom ASIC when logic requirements are still evolving. Its 48,000 logic elements support general-purpose control, datapath, interface, and glue-logic implementations.
The device provides 500 user I/Os, enabling dense connections between external memories, processors, transceivers, sensors, and display or communication interfaces. Its 396,288 total RAM bits provide on-chip storage for buffers, lookup tables, packet handling, and control state. The -7 speed designation and 1.2 V supply position it as a performance-oriented ECP2 option for systems requiring substantial logic density in a single package.
The 672-FPBGA package is intended for surface-mount assembly and requires careful ball-grid-array PCB design, including adequate escape routing, power delivery, and thermal management. Because the package contains hundreds of balls, designers should use the manufacturer’s package information, pinout data, and design tools when assigning signals and planning decoupling. The ECP2 architecture is useful when a design needs programmable update capability, multiple interface options, or a shorter path from prototype to volume hardware than a fixed-function ASIC.
Typical uses include industrial automation, communications infrastructure, embedded systems, test equipment, video and display control, sensor aggregation, and general-purpose digital signal processing. The device is especially appropriate when the design needs substantial I/O density and logic capacity but does not require the power, performance, or software ecosystem of a higher-end FPGA.
For implementation, prioritize power planning, high-speed routing constraints, and the manufacturer’s recommended ball-assignment and decoupling practices. This page combines the product’s core ECP2 specifications with practical design considerations, application guidance, and a comparison framework for engineers evaluating the LFE2-50E-7F672C against related ECP2 devices.
Alternativas drop-in para LFE2-50E-7F672C — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com LFE2-50E-7F672C (mesmo formato e footprint) — diferindo em DSP Support, Package Type, Speed Grade.
LFE2-50E-7FN672C
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
LFE2-50E-6FN672C
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
LFE2-50E-6FN672I
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
LFE2-50SE-7F672C
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
LFE2-50E-7F672C Classificações máximas e características elétricas
| Product Type | ECP2 field-programmable gate array (FPGA) |
| Logic Elements | 48,000 logic elements |
| User I/O | 500 user I/Os |
| Total RAM | 396,288 bits |
| Tensão de alimentação | 1.2 V |
| Speed Grade | -7 speed grade |
| Encapsulamento | 672-FPBGA, 27 mm x 27 mm |
| Tipo de montagem | Surface mount |
| Package Type | Fine-pitch ball grid array (FPBGA) |
| Device Family | Lattice ECP2 |
| Programmable Logic | 48K LUTs |
| DSP Support | DSP |
Guia de Configuração de Pinos do LFE2-50E-7F672C fine-pitch ball grid array (fpbga)
Configuração de pinos para LFE2-50E-7F672C (pacote fine-pitch ball grid array (fpbga)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para LFE2-50E-7F672C.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
LFE2-50E-7F672C é adequado para 6 aplicaçãos: Industrial Automation Control, Embedded Communications Interface, Video and Display Control, Sensor Aggregation and Data Acquisition, Programmable Signal Processing, Test and Measurement Equipment.
Industrial Automation Control
The LFE2-50E-7F672C fits industrial controllers that combine sequencing logic, sensor conditioning, actuator interfaces, and communications in one programmable device. Its 48,000 logic elements can accommodate control state machines, while 396,288 RAM bits support buffering and local data handling. With 500 user I/Os, the device offers substantial connectivity to sensors, relays, motor drivers, and field buses. The -7 speed grade benefits timing-sensitive control logic. Before release, confirm the exact temperature grade and use Lattice power, grounding, and decoupling guidance for the 1.2 V core and configurable I/O rails.
Recomendado
Embedded Communications Interface
The LFE2-50E-7F672C is suitable for protocol converters, interface bridges, and communications gateways that must combine parallel and serial logic with substantial I/O. Its 48K LUT capacity can implement framing, filtering, buffering, and state management, while 396,288 RAM bits provide on-chip packet and data storage. The 500 user I/Os allow direct connection to transceivers, memories, processors, and status logic. Designers should map every ball through the official pin-information file and apply the manufacturer’s timing constraints for high-speed interfaces.
Recomendado
Video and Display Control
The LFE2-50E-7F672C can implement timing generation, pixel processing, interface conversion, and control logic for video or display systems. Its 48,000 logic elements provide substantial parallel-processing capability, while 500 I/Os support source interfaces, memory devices, and output drivers. The available RAM can support line buffers and control state in cost-sensitive programmable implementations. Because the device uses a 672-FPBGA, the PCB must preserve high-speed signal integrity through short escape routes, continuous return paths, and carefully planned power distribution.
Recomendado
Sensor Aggregation and Data Acquisition
The LFE2-50E-7F672C fits data-acquisition front ends that must collect signals from many sensors and perform digital filtering or routing before transmitting results. Its 500 user I/Os provide broad sensor and auxiliary connectivity, while 48,000 logic elements can implement acquisition control, calibration tables, digital filtering, and diagnostics. The 396,288 RAM bits add local buffering for burst-oriented data sources. A practical implementation should verify supported I/O standards, voltage-tolerance limits, and acquisition timing using the manufacturer datasheet.
Recomendado
Programmable Signal Processing
The LFE2-50E-7F672C can implement DSP-assisted functions such as filters, correlation, waveform generation, and data classification using its ECP2 programmable logic and DSP capability. The 48K-LUT resource count supports parallel datapaths, and 396,288 RAM bits can hold coefficients, samples, and intermediate data. The -7 speed grade favors timing performance compared with the related -6 device. Resource usage, clocking, and achievable performance should be checked in Lattice Diamond or the current supported FPGA design tool.
Recomendado
Test and Measurement Equipment
The LFE2-50E-7F672C is suitable for programmable test logic, pattern generation, timing control, and multi-channel instrumentation. Its 48,000 logic elements and 500 user I/Os support parallel fixture or instrument control, while RAM blocks can hold test vectors and status data. A -7 speed grade provides useful timing margin for synchronous test sequences. The fine-pitch 672-FPBGA requires calibrated assembly, via-in-pad or escape routing, and careful power-integrity work; simulation should include worst-case loading and I/O activity.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para LFE2-50E-7F672C — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | LFE2-50E-7FN672C | LFE2-50E-6FN672C | LFE2-50E-6FN672I | LFE2-50SE-7F672C |
|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 672-FPBGA | 672-FPBGA - same | 672-FPBGA - same | 672-FPBGA - same | 672-FPBGA - same |
| Speed Grade | -7 speed | -7 speed | -6 speed | -6 speed | -7 speed |
Principais diferenciais
- Higher speed grade than the 6-speed alternatives (vs LFE2-50E-6FN672C)
- Closeest ordering match with the same visible resource set (vs LFE2-50E-7FN672C)
- High logic and I/O density for programmable integration (vs LFE2-50E-6FN672I)
Notas de projeto
Plan the 1.2 V core rail and every required I/O supply as a complete power tree. Place the manufacturer-recommended decoupling capacitors directly at the associated power balls, provide low-impedance ground references, and use multiple connections between planes and vias where the layout rules require them. Verify the selected I/O standard’s voltage and current limits independently from the core supply.
The 672-FPBGA requires fine-pitch escape routing and careful layer-transition planning. Follow the manufacturer’s recommended ball assignments, via geometry, solder-mask and paste design, and assembly process rather than substituting generic BGA rules. Maintain continuous return paths beneath high-speed signals and avoid long stubs that can create reflections.
Constrain every interface according to its actual clock rate, I/O standard, loading, and board topology. Use source-series termination, receiver termination, or other interface-specific schemes only when directed by the device documentation and system design. Simulate worst-case I/O activity and simultaneous switching because the 500-user-I/O count can create substantial dynamic-current demand.
Do not treat a related ECP2 ordering code as automatically interchangeable. The LFE2-50E-7FN672C is the closest visible match, while the -6-speed devices are lower-grade alternatives. Before substitution, compare ball assignments, temperature grade, configuration method, supported I/O standards, power sequencing, and bitstream compatibility in the manufacturer documentation.
Informações de conformidade
Compliance declarations for this exact ordering code were not identified in the retrieved product information. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status with the manufacturer before procurement or qualification.