LFE2-50E-7F672C - 48K LUT ECP2 FPGA, 500 I/O | Lattice Semiconductor
料号: LFE2-50E-7F672C ✓ 量产中LFE2-50E-7F672C 概述
An FPGA is a programmable-logic semiconductor whose lookup tables, registers, interconnect resources, memory blocks, and programmable I/O are configured after fabrication. The LFE2-50E-7F672C belongs to the Lattice ECP2 family, where programmable logic provides a practical alternative to a custom ASIC when logic requirements are still evolving. Its 48,000 logic elements support general-purpose control, datapath, interface, and glue-logic implementations.
The device provides 500 user I/Os, enabling dense connections between external memories, processors, transceivers, sensors, and display or communication interfaces. Its 396,288 total RAM bits provide on-chip storage for buffers, lookup tables, packet handling, and control state. The -7 speed designation and 1.2 V supply position it as a performance-oriented ECP2 option for systems requiring substantial logic density in a single package.
The 672-FPBGA package is intended for surface-mount assembly and requires careful ball-grid-array PCB design, including adequate escape routing, power delivery, and thermal management. Because the package contains hundreds of balls, designers should use the manufacturer’s package information, pinout data, and design tools when assigning signals and planning decoupling. The ECP2 architecture is useful when a design needs programmable update capability, multiple interface options, or a shorter path from prototype to volume hardware than a fixed-function ASIC.
Typical uses include industrial automation, communications infrastructure, embedded systems, test equipment, video and display control, sensor aggregation, and general-purpose digital signal processing. The device is especially appropriate when the design needs substantial I/O density and logic capacity but does not require the power, performance, or software ecosystem of a higher-end FPGA.
For implementation, prioritize power planning, high-speed routing constraints, and the manufacturer’s recommended ball-assignment and decoupling practices. This page combines the product’s core ECP2 specifications with practical design considerations, application guidance, and a comparison framework for engineers evaluating the LFE2-50E-7F672C against related ECP2 devices.
直接替换替代料: LFE2-50E-7F672C ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: LFE2-50E-7F672C (相同外形与封装尺寸) ——差异在于 DSP Support, Package Type, Speed Grade.
LFE2-50E-7FN672C
✅ 直接替换📋 参考替代料(不在目录中)
LFE2-50E-6FN672C
✅ 直接替换📋 参考替代料(不在目录中)
LFE2-50E-6FN672I
✅ 直接替换📋 参考替代料(不在目录中)
LFE2-50SE-7F672C
✅ 直接替换📋 参考替代料(不在目录中)
LFE2-50E-7F672C 最大额定值与电气特性
| Product Type | ECP2 field-programmable gate array (FPGA) |
| Logic Elements | 48,000 logic elements |
| User I/O | 500 user I/Os |
| Total RAM | 396,288 bits |
| 电源电压 | 1.2 V |
| Speed Grade | -7 speed grade |
| 封装 | 672-FPBGA, 27 mm x 27 mm |
| 安装类型 | Surface mount |
| Package Type | Fine-pitch ball grid array (FPBGA) |
| Device Family | Lattice ECP2 |
| Programmable Logic | 48K LUTs |
| DSP Support | DSP |
LFE2-50E-7F672C fine-pitch ball grid array (fpbga) 引脚配置指南
LFE2-50E-7F672C(fine-pitch ball grid array (fpbga) 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: LFE2-50E-7F672C.
请参阅 数据手册 以查看完整引脚配置。
典型应用
LFE2-50E-7F672C 适用于 6 应用s: Industrial Automation Control, Embedded Communications Interface, Video and Display Control, Sensor Aggregation and Data Acquisition, Programmable Signal Processing, Test and Measurement Equipment.
Industrial Automation Control
The LFE2-50E-7F672C fits industrial controllers that combine sequencing logic, sensor conditioning, actuator interfaces, and communications in one programmable device. Its 48,000 logic elements can accommodate control state machines, while 396,288 RAM bits support buffering and local data handling. With 500 user I/Os, the device offers substantial connectivity to sensors, relays, motor drivers, and field buses. The -7 speed grade benefits timing-sensitive control logic. Before release, confirm the exact temperature grade and use Lattice power, grounding, and decoupling guidance for the 1.2 V core and configurable I/O rails.
推荐
Embedded Communications Interface
The LFE2-50E-7F672C is suitable for protocol converters, interface bridges, and communications gateways that must combine parallel and serial logic with substantial I/O. Its 48K LUT capacity can implement framing, filtering, buffering, and state management, while 396,288 RAM bits provide on-chip packet and data storage. The 500 user I/Os allow direct connection to transceivers, memories, processors, and status logic. Designers should map every ball through the official pin-information file and apply the manufacturer’s timing constraints for high-speed interfaces.
推荐
Video and Display Control
The LFE2-50E-7F672C can implement timing generation, pixel processing, interface conversion, and control logic for video or display systems. Its 48,000 logic elements provide substantial parallel-processing capability, while 500 I/Os support source interfaces, memory devices, and output drivers. The available RAM can support line buffers and control state in cost-sensitive programmable implementations. Because the device uses a 672-FPBGA, the PCB must preserve high-speed signal integrity through short escape routes, continuous return paths, and carefully planned power distribution.
推荐
Sensor Aggregation and Data Acquisition
The LFE2-50E-7F672C fits data-acquisition front ends that must collect signals from many sensors and perform digital filtering or routing before transmitting results. Its 500 user I/Os provide broad sensor and auxiliary connectivity, while 48,000 logic elements can implement acquisition control, calibration tables, digital filtering, and diagnostics. The 396,288 RAM bits add local buffering for burst-oriented data sources. A practical implementation should verify supported I/O standards, voltage-tolerance limits, and acquisition timing using the manufacturer datasheet.
推荐
Programmable Signal Processing
The LFE2-50E-7F672C can implement DSP-assisted functions such as filters, correlation, waveform generation, and data classification using its ECP2 programmable logic and DSP capability. The 48K-LUT resource count supports parallel datapaths, and 396,288 RAM bits can hold coefficients, samples, and intermediate data. The -7 speed grade favors timing performance compared with the related -6 device. Resource usage, clocking, and achievable performance should be checked in Lattice Diamond or the current supported FPGA design tool.
推荐
Test and Measurement Equipment
The LFE2-50E-7F672C is suitable for programmable test logic, pattern generation, timing control, and multi-channel instrumentation. Its 48,000 logic elements and 500 user I/Os support parallel fixture or instrument control, while RAM blocks can hold test vectors and status data. A -7 speed grade provides useful timing margin for synchronous test sequences. The fine-pitch 672-FPBGA requires calibrated assembly, via-in-pad or escape routing, and careful power-integrity work; simulation should include worst-case loading and I/O activity.
推荐
推荐产品汇总
工程参考数据: LFE2-50E-7F672C ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | LFE2-50E-7FN672C | LFE2-50E-6FN672C | LFE2-50E-6FN672I | LFE2-50SE-7F672C |
|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 672-FPBGA | 672-FPBGA - same | 672-FPBGA - same | 672-FPBGA - same | 672-FPBGA - same |
| Speed Grade | -7 speed | -7 speed | -6 speed | -6 speed | -7 speed |
关键差异点
- Higher speed grade than the 6-speed alternatives (对比 LFE2-50E-6FN672C)
- Closeest ordering match with the same visible resource set (对比 LFE2-50E-7FN672C)
- High logic and I/O density for programmable integration (对比 LFE2-50E-6FN672I)
设计说明
Plan the 1.2 V core rail and every required I/O supply as a complete power tree. Place the manufacturer-recommended decoupling capacitors directly at the associated power balls, provide low-impedance ground references, and use multiple connections between planes and vias where the layout rules require them. Verify the selected I/O standard’s voltage and current limits independently from the core supply.
The 672-FPBGA requires fine-pitch escape routing and careful layer-transition planning. Follow the manufacturer’s recommended ball assignments, via geometry, solder-mask and paste design, and assembly process rather than substituting generic BGA rules. Maintain continuous return paths beneath high-speed signals and avoid long stubs that can create reflections.
Constrain every interface according to its actual clock rate, I/O standard, loading, and board topology. Use source-series termination, receiver termination, or other interface-specific schemes only when directed by the device documentation and system design. Simulate worst-case I/O activity and simultaneous switching because the 500-user-I/O count can create substantial dynamic-current demand.
Do not treat a related ECP2 ordering code as automatically interchangeable. The LFE2-50E-7FN672C is the closest visible match, while the -6-speed devices are lower-grade alternatives. Before substitution, compare ball assignments, temperature grade, configuration method, supported I/O standards, power sequencing, and bitstream compatibility in the manufacturer documentation.
合规信息
Compliance declarations for this exact ordering code were not identified in the retrieved product information. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status with the manufacturer before procurement or qualification.