LM239DT - Low-Power Quad Voltage Comparator | STMicroelectronics
N.º da peça: LM239DT ✓ AtivoLM239DT Visão geral
A voltage comparator is an analog interface IC that compares two input voltages and changes its output state when one input crosses the other. In the broader semiconductor hierarchy, the LM239 belongs to the comparator class, within linear and analog interface integrated circuits used for sensing and control. Each LM239DT channel is independent, allowing four separate sensing or switching functions without cross-channel interaction.
The four-channel architecture reduces component count in multi-quadrant systems while preserving open-collector output flexibility. Open-collector outputs can sink logic-level current and support wired-AND behavior when an external pull-up is installed. The STMicroelectronics LM239 datasheet also identifies the A-version offset-voltage specification as low as 2 mV maximum, illustrating the precision range available across the LM239 family.
The LM239 family is designed for single-supply or split-supply operation, so it can be used in systems with one positive rail or with positive and negative rails. Because all four channels share the same package, input filtering, supply decoupling, and output pull-up practices can be standardized across a board. The 14-pin SO outline also provides enough pins for the four comparators' differential inputs and open-collector outputs.
Typical uses include industrial sensor interfaces, battery threshold detection, overvoltage and undervoltage monitoring, window comparators, and control systems that require open-collector signaling. In window-comparator arrangements, two channels can define upper and lower thresholds while another channel handles a separate event, improving functional density compared with discrete single comparators.
PCB design should keep input traces short, provide stable supply bypassing near the device, and route output pull-up networks away from sensitive analog inputs. Open-collector outputs require an appropriate pull-up voltage and resistor, and designers should verify that the selected pull-up keeps the output within the connected logic family's voltage limits.
This product page combines the manufacturer family description, package identification, practical application guidance, and a pin-compatible replacement comparison. It also identifies where the exact ordering code, electrical limits, pin descriptions, and lifecycle status should be confirmed with the STMicroelectronics datasheet before production release.
Alternativas drop-in para LM239DT — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com LM239DT (mesmo formato e footprint) — diferindo em Comparator Type, Output Type, Package, Number of Channels, Supply Configuration.
LM239D
✅ Drop-InConsulte o preço
Ver ficha técnica →LM239AMDREP
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
LM339DT
✅ Drop-InConsulte o preço
Ver ficha técnica →LM239D
✅ Drop-InConsulte o preço
Ver ficha técnica →LM239D
✅ Drop-InConsulte o preço
Ver ficha técnica →LM239DT Classificações máximas e características elétricas
| Comparator Type | 4 independent precision voltage comparators |
| Number of Channels | 4 channels |
| Supply Configuration | Single supply or split supply |
| Tipo de saída | Open collector |
| Output Logic Compatibility | CMOS, DTL, ECL, MOS, TTL |
| Encapsulamento | 14-pin SO |
| Tipo de montagem | Surface mount |
Guia de Configuração de Pinos do LM239DT 14-pin so
Configuração de pinos para LM239DT (pacote 14-pin so). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.
Nenhum dado detalhado de pinagem disponível para LM239DT.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
LM239DT é adequado para 6 aplicaçãos: Industrial Sensor Threshold Detection, Battery Voltage Monitoring, Overvoltage and Undervoltage Protection, Window Comparator Control, Level Translation and Logic Interfacing, LED and Lighting Status Control.
Industrial Sensor Threshold Detection
The LM239DT fits industrial sensor interfaces that compare a conditioned analog signal with adjustable upper and lower thresholds. Each of its four independent comparator channels can evaluate a separate sensing point, reducing the number of packages required on a crowded control board. Open-collector outputs can directly drive pull-up-based alarm inputs, relay-driver stages, or PLC-compatible logic interfaces. According to the STMicroelectronics LM239 datasheet, the family supports single and split power supplies, allowing the same device to monitor circuits using either arrangement. The design should use separate input filtering if sensor nodes carry switching noise, and each open-collector output needs a pull-up sized for the receiving logic and required switching speed.
Recomendado
Battery Voltage Monitoring
The LM239DT is suitable for multi-level battery supervision because four independent channels can detect undervoltage, overvoltage, and intermediate warning conditions. Its single-supply operating capability makes it useful in portable systems that do not provide a negative rail, while the split-supply capability supports designs that monitor signals referenced around ground. Open-collector outputs permit alarm signals to be combined through pull-ups or routed to a system controller. For accurate battery decisions, compare the measured input against the exact supply and common-mode limits in the manufacturer electrical tables, and account for the resistor-divider tolerances that establish each threshold.
Recomendado
Overvoltage and Undervoltage Protection
The LM239DT can implement independent overvoltage and undervoltage detection channels around a protected power rail. A divided rail voltage can be compared against a reference at each input, while the comparator output changes state when the monitored condition crosses its threshold. Four channels allow a compact design to combine upper-limit, lower-limit, fast-fault, and status functions. Open-collector outputs are useful when the fault signal must remain active despite a broken or disconnected wire, provided a correctly sized pull-up is present. Designers should verify the operating supply, input common-mode range, output sink current, and propagation delay before using the device for safety-critical shutdown actions.
Recomendado
Window Comparator Control
A window comparator uses two LM239DT channels to define a valid operating range: one channel detects the lower limit and another detects the upper limit. Because the device contains four independent comparators, the remaining channels can add an auxiliary warning or control event without requiring another quad package. The open-collector outputs can be combined with external pull-ups so the system receives a defined invalid-range indication. Threshold accuracy depends on the input offset and resistor-divider tolerances, making careful reference selection and input routing important. Verify that both input signals remain inside the supported common-mode range across temperature and supply variation, and check output timing when the compared voltages cross near one another.
Recomendado
Level Translation and Logic Interfacing
The LM239DT can support level translation when two voltage domains must be compared before a digital signal changes state. The comparator's differential inputs evaluate the level relationship, while the open-collector output can sink current in the destination domain. TI identifies CMOS, MOS, and TTL output compatibility for its LM239 family, while STMicroelectronics describes CMOS, DTL, ECL, MOS, and TTL compatibility across the LM239 family. The external pull-up establishes the destination logic-high level and must remain within the comparator's output and supply constraints. Add hysteresis or filtering where noisy transitions could cause repeated output toggling, and verify propagation-delay requirements for high-speed data paths.
Recomendado
LED and Lighting Status Control
The LM239DT can implement several lighting or status-annunciation functions by comparing control voltages with reference thresholds. Each open-collector output can sink current through a pull-up and indicator-driver stage, allowing the device to represent operating states, fault conditions, or setpoint crossings. The quad architecture is useful in lighting controllers that need separate indications for power, enable, thermal warning, and output-ready states. Keep the pull-up network separate from high-current LED drive paths so comparator switching does not create large ground-current disturbances. Select resistor dividers and reference sources for stable thresholds, and confirm that all compared voltages stay within the device's common-mode operating range.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para LM239DT — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | LM239D | LM239AMDREP | LM339DT | LM239D | LM239 |
|---|---|---|---|---|---|---|
| Package | SO-14 | SO-14 | SO-14 | SO-14 | SO-14 | SO-14 |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | Texas Instruments | Texas Instruments |
| Comparator Channels | 4 | 4 | 4 | 4 | 4 | 4 |
| Output Type | Open collector | Open collector | Open collector | Open collector | Open collector | Open collector |
Principais diferenciais
- Four independent channels in one 14-pin SO package (vs LM239D)
- A-version precision option is available for closer threshold decisions (vs LM239AMDREP)
- Single- and split-supply flexibility (vs LM239D)
Notas de projeto
Place the LM239DT close to the signals being compared and keep the four input routes short to reduce susceptibility to switching noise. Route the open-collector outputs and their pull-up resistors away from sensitive comparator inputs, and use a continuous ground reference for all channels. Because the device contains four independent comparators in one package, consistent input filtering across all channels can help prevent channel-to-channel behavior differences.
Provide local supply decoupling at the LM239DT and select the bypass capacitor using the stability and transient-response guidance in the manufacturer datasheet. Keep the pull-up voltage below the applicable output and supply limits. If the board uses split supplies, verify the common-mode and differential input ranges for both positive and negative rail conditions rather than assuming that the single-supply configuration applies equally.
Do not treat the open-collector output as a push-pull logic output: every channel requires an external pull-up for normal operation. Choose the resistor from the required sink current, output-low voltage, destination-logic input current, and output rise-time requirement. Also confirm that the compared input voltages remain within the common-mode range across temperature, supply tolerance, and resistor-divider error.
Separate low-level input traces from output pull-up loops and high-current switching paths. When two channels form a window comparator, route their threshold-network connections symmetrically to minimize channel mismatch and timing skew. Place any hysteresis components close to the relevant inputs, and inspect the assembled board for leakage paths, contamination, and unstable references that could shift the decision threshold.
Informações de conformidade
The LM239 family description and package are identified, but specific environmental declarations and qualification statements for the LM239DT ordering code are not present in the manufacturer references.