STMicroelectronics

LM239DT - Low-Power Quad Voltage Comparator | STMicroelectronics

MPN: LM239DT ✓ Aktif
Single supply or split supply Vdss 14-pin SO Package
MOQ: 1 |

LM239DT Genel Bakış

STMicroelectronics LM239DT is a low-power quad voltage comparator containing four independent precision comparator channels in a 14-pin SO package. The device supports operation from a single power supply over a wide voltage range and can also operate with split power supplies. Its open-collector outputs are compatible with CMOS, DTL, ECL, MOS, and TTL logic families, making the IC suitable for threshold detection, level translation, and industrial control interfaces.

A voltage comparator is an analog interface IC that compares two input voltages and changes its output state when one input crosses the other. In the broader semiconductor hierarchy, the LM239 belongs to the comparator class, within linear and analog interface integrated circuits used for sensing and control. Each LM239DT channel is independent, allowing four separate sensing or switching functions without cross-channel interaction.

The four-channel architecture reduces component count in multi-quadrant systems while preserving open-collector output flexibility. Open-collector outputs can sink logic-level current and support wired-AND behavior when an external pull-up is installed. The STMicroelectronics LM239 datasheet also identifies the A-version offset-voltage specification as low as 2 mV maximum, illustrating the precision range available across the LM239 family.

The LM239 family is designed for single-supply or split-supply operation, so it can be used in systems with one positive rail or with positive and negative rails. Because all four channels share the same package, input filtering, supply decoupling, and output pull-up practices can be standardized across a board. The 14-pin SO outline also provides enough pins for the four comparators' differential inputs and open-collector outputs.

Typical uses include industrial sensor interfaces, battery threshold detection, overvoltage and undervoltage monitoring, window comparators, and control systems that require open-collector signaling. In window-comparator arrangements, two channels can define upper and lower thresholds while another channel handles a separate event, improving functional density compared with discrete single comparators.

PCB design should keep input traces short, provide stable supply bypassing near the device, and route output pull-up networks away from sensitive analog inputs. Open-collector outputs require an appropriate pull-up voltage and resistor, and designers should verify that the selected pull-up keeps the output within the connected logic family's voltage limits.

This product page combines the manufacturer family description, package identification, practical application guidance, and a pin-compatible replacement comparison. It also identifies where the exact ordering code, electrical limits, pin descriptions, and lifecycle status should be confirmed with the STMicroelectronics datasheet before production release.

Drop-in alternatifler için LM239DT — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller LM239DT (aynı form faktörü ve ayağa oturma) — farklı olan Comparator Type, Output Type, Package, Number of Channels, Supply Configuration.

Texas Instruments
Comparator Type: Quad precision differential voltage comparator
Output Type: Open-collector
Package: 14-pin SOIC
İle Karşılaştır LM239DT →
onsemi
Comparator Type: General-purpose differential comparator
Output Type: Open collector with CMOS, open-collector, and TTL compatibility
Package: 14-pin SOIC
İle Karşılaştır LM239DT →
STMicroelectronics
Comparator Type: Quad differential voltage comparator
Package: 14-pin SOIC
Number of Channels: 4 independent channels
İle Karşılaştır LM239DT →

LM239D

✅ Yerleştirme
Texas Instruments
📦 SO-14
Quad precision differential voltage comparator · 4 independent channels · ±15 V or 30 V · Open-collector · 25 nA typical · ±5.0 nA typical · 2 mV maximum for LM239A family variants; LM239D-specific value not supplied · 1.3 µs typical

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

LM239AMDREP

✅ Yerleştirme
📦 SO-14
A-version offset is 2 mV maximum versus the 5 mV maximum associated with the standard non-A LM239 function, while retaining the quad SO-14 comparator footprint.

📋 Katalogda Olmayan Referans Alternatifi

LM339DT

✅ Yerleştirme
STMicroelectronics
📦 SO-14
Quad differential voltage comparator · 4 independent channels · 2 V to 36 V · Open collector · CMOS, DTL, ECL, MOS, and TTL · 14-pin SOIC · Surface mount · 2 mV maximum

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

LM239D

✅ Yerleştirme
Texas Instruments
📦 SO-14
Quad precision differential voltage comparator · 4 independent channels · ±15 V or 30 V · Open-collector · 25 nA typical · ±5.0 nA typical · 2 mV maximum for LM239A family variants; LM239D-specific value not supplied · 1.3 µs typical

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

LM239D

✅ Yerleştirme
Texas Instruments
📦 SO-14
Quad precision differential voltage comparator · 4 independent channels · ±15 V or 30 V · Open-collector · 25 nA typical · ±5.0 nA typical · 2 mV maximum for LM239A family variants; LM239D-specific value not supplied · 1.3 µs typical

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

LM239DT Maksimum Değerlendirmeler & Elektriksel Özellikler

Comparator Type 4 independent precision voltage comparators
Number of Channels 4 channels
Supply Configuration Single supply or split supply
Çıkış Türü Open collector
Output Logic Compatibility CMOS, DTL, ECL, MOS, TTL
Paket 14-pin SO
Montaj Türü Surface mount

LM239DT 14-pin so Pin Yapısı Kılavuzu

LM239DT (14-pin so paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.

14-pin so paket pin çizelgesi için LM239DT

Ayrıntılı pin çıkış verisi mevcut değil: LM239DT.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

LM239DT için uygundur 6 uygulamas: Industrial Sensor Threshold Detection, Battery Voltage Monitoring, Overvoltage and Undervoltage Protection, Window Comparator Control, Level Translation and Logic Interfacing, LED and Lighting Status Control.

🏭

Industrial Sensor Threshold Detection

The LM239DT fits industrial sensor interfaces that compare a conditioned analog signal with adjustable upper and lower thresholds. Each of its four independent comparator channels can evaluate a separate sensing point, reducing the number of packages required on a crowded control board. Open-collector outputs can directly drive pull-up-based alarm inputs, relay-driver stages, or PLC-compatible logic interfaces. According to the STMicroelectronics LM239 datasheet, the family supports single and split power supplies, allowing the same device to monitor circuits using either arrangement. The design should use separate input filtering if sensor nodes carry switching noise, and each open-collector output needs a pull-up sized for the receiving logic and required switching speed.

📱

Battery Voltage Monitoring

The LM239DT is suitable for multi-level battery supervision because four independent channels can detect undervoltage, overvoltage, and intermediate warning conditions. Its single-supply operating capability makes it useful in portable systems that do not provide a negative rail, while the split-supply capability supports designs that monitor signals referenced around ground. Open-collector outputs permit alarm signals to be combined through pull-ups or routed to a system controller. For accurate battery decisions, compare the measured input against the exact supply and common-mode limits in the manufacturer electrical tables, and account for the resistor-divider tolerances that establish each threshold.

⚡

Overvoltage and Undervoltage Protection

The LM239DT can implement independent overvoltage and undervoltage detection channels around a protected power rail. A divided rail voltage can be compared against a reference at each input, while the comparator output changes state when the monitored condition crosses its threshold. Four channels allow a compact design to combine upper-limit, lower-limit, fast-fault, and status functions. Open-collector outputs are useful when the fault signal must remain active despite a broken or disconnected wire, provided a correctly sized pull-up is present. Designers should verify the operating supply, input common-mode range, output sink current, and propagation delay before using the device for safety-critical shutdown actions.

🔧

Window Comparator Control

A window comparator uses two LM239DT channels to define a valid operating range: one channel detects the lower limit and another detects the upper limit. Because the device contains four independent comparators, the remaining channels can add an auxiliary warning or control event without requiring another quad package. The open-collector outputs can be combined with external pull-ups so the system receives a defined invalid-range indication. Threshold accuracy depends on the input offset and resistor-divider tolerances, making careful reference selection and input routing important. Verify that both input signals remain inside the supported common-mode range across temperature and supply variation, and check output timing when the compared voltages cross near one another.

🌐

Level Translation and Logic Interfacing

The LM239DT can support level translation when two voltage domains must be compared before a digital signal changes state. The comparator's differential inputs evaluate the level relationship, while the open-collector output can sink current in the destination domain. TI identifies CMOS, MOS, and TTL output compatibility for its LM239 family, while STMicroelectronics describes CMOS, DTL, ECL, MOS, and TTL compatibility across the LM239 family. The external pull-up establishes the destination logic-high level and must remain within the comparator's output and supply constraints. Add hysteresis or filtering where noisy transitions could cause repeated output toggling, and verify propagation-delay requirements for high-speed data paths.

💡

LED and Lighting Status Control

The LM239DT can implement several lighting or status-annunciation functions by comparing control voltages with reference thresholds. Each open-collector output can sink current through a pull-up and indicator-driver stage, allowing the device to represent operating states, fault conditions, or setpoint crossings. The quad architecture is useful in lighting controllers that need separate indications for power, enable, thermal warning, and output-ready states. Keep the pull-up network separate from high-current LED drive paths so comparator switching does not create large ground-current disturbances. Select resistor dividers and reference sources for stable thresholds, and confirm that all compared voltages stay within the device's common-mode operating range.

What is the LM239DT?
The LM239DT is a STMicroelectronics low-power quad voltage comparator with four independent precision comparator channels in a 14-pin SO package. According to the STMicroelectronics LM239 datasheet, the family supports single or split power supplies and uses open-collector outputs compatible with CMOS, DTL, ECL, MOS, and TTL logic. It is appropriate for threshold sensing, window detection, and control systems that require several comparisons on one board.
Where can I download the LM239DT datasheet PDF?
The LM239DT datasheet PDF is available from the official STMicroelectronics document at https://www.st.com/resource/en/datasheet/lm239.pdf. The manufacturer product page at https://www.st.com/en/amplifiers-and-comparators/lm239.html provides family-level information, ordering options, and supporting documentation. Use the pin-description table and electrical-characteristics tables in the manufacturer datasheet before assigning pins, selecting pull-ups, or releasing a production design.
What are the key specifications of LM239DT that engineers should know?
The LM239DT integrates four independent precision voltage comparators into one 14-pin SO package and provides open-collector outputs compatible with CMOS, DTL, ECL, MOS, and TTL. According to the STMicroelectronics LM239 datasheet, the family supports both single-supply and split-supply operation. The A-version family member reaches an input offset specification as low as 2 mV maximum, although the exact LM239DT limits must be confirmed from its ordering-table parameters.
How does the LM239DT compare with the TI LM239?
The STMicroelectronics LM239DT and TI LM239 are both four-channel differential comparator families intended for low-power signal and control applications. According to TI's LM239 product information, the B-version is a drop-in replacement for the LM239, LM339, and LM2901 families, while output compatibility covers TTL, MOS, and CMOS. Board-level substitution still requires checking the exact suffix, package, temperature grade, input limits, output ratings, and lifecycle status.
What can replace the LM239DT?
The LM239DT can be replaced only by a quad comparator with the same SO-14 footprint, compatible input and output arrangement, and electrical ratings suitable for the existing board. STMicroelectronics LM239-family SO-14 options include LM239D, LM239AMDREP, and LM339DT, while TI lists an LM239 family for cross-brand evaluation. Confirm pinout, temperature grade, offset voltage, supply range, and output-current limits before approving any replacement.
Is the LM239DT the same as the TI LM239?
The LM239DT is an STMicroelectronics ordering code for a 14-pin SO quad comparator, whereas the TI LM239 is a separate manufacturer product with its own suffix and ordering options. Both families use four differential comparators and open-collector-style output functions, but they are not automatically identical. TI states that its B-version is a drop-in replacement for LM239-family devices, so the exact TI suffix and SO-14 variant must be checked against the LM239DT footprint.
When should I choose the LM239DT instead of a single comparator?
Choose the LM239DT when the design needs four independent comparison functions and can benefit from one package, one supply connection scheme, and consistent output structure. A single comparator may be more appropriate when only one threshold is required and board area is not constrained. The quad arrangement is especially useful for upper-threshold, lower-threshold, auxiliary, and fault-detection channels, provided all four channels operate within their common electrical ratings.
Is the LM239DT suitable for a window comparator circuit?
The LM239DT is suitable for a window comparator because it contains four independent channels in one package. Two channels can define lower and upper thresholds, while another can provide an additional status or alarm function. Each open-collector output requires an external pull-up, and the resulting wired logic must be checked against the intended system behavior. Supply voltage, common-mode range, and output sink-current requirements should be verified from the manufacturer electrical tables.
Where can I buy LM239DT online?
Use the Request a Quote form on this page to request LM239DT availability, lead time, and purchasing terms from XAIPART. The manufacturer product page and official datasheet can also be used to confirm the device description and technical documentation. A component is considered available only after the current quote response confirms stock, package quantity, and delivery timing.
What is the price of the LM239DT?
The current LM239DT price is obtained through the Request a Quote form on this page. The structured offer updates according to the selected quantity, package, currency, and current component availability. Request a quote rather than relying on a historical figure, since market pricing and availability can change without a change to the device's electrical characteristics.
What is the lead time for the LM239DT?
The LM239DT lead time depends on the manufacturer's current inventory, the requested package quantity, and the manufacturing condition of the selected ordering code. Submit the required quantity and target date through the Request a Quote form on this page. The resulting quotation should state the confirmed lead time, packing method, and order acknowledgment information.
Is the LM239DT in stock?
Current LM239DT stock is confirmed through the Request a Quote form on this page. Submit the desired quantity, package suffix, and target date so the quotation can reflect live inventory and replenishment conditions. A listing page alone does not guarantee that a specific quantity is immediately available for shipment.
What is the best drop-in replacement for the LM239DT?
The closest drop-in choices must preserve the 14-pin SO footprint and open-collector quad-comparator function. STMicroelectronics LM239D is the most direct same-family SO-14 candidate, while LM239AMDREP adds an A-grade offset option and LM339DT is a closely related ST quad comparator. TI's LM239 family is a valid cross-brand consideration because TI identifies its B-version as a drop-in replacement for LM239-family devices. Final approval requires suffix-specific verification.
Can an LM339DT replace an LM239DT?
An LM339DT may be considered for an LM239DT design after verifying both boards use the same 14-pin SO footprint and compatible open-collector outputs. The STMicroelectronics family comparison identifies LM339 and LM239 as related devices, and TI states that its B-version can replace LM339-family devices. However, offset voltage, common-mode range, supply limits, temperature grade, and output-current behavior can differ, so a footprint match alone is insufficient.
How should pull-up resistors be selected for LM239DT open-collector outputs?
Select each pull-up so the output can sink the required logic current while remaining within the LM239DT output ratings and the receiving device's input limits. The pull-up voltage must not exceed the relevant supply or output constraint, and the resistor must be small enough to achieve the required rise time but large enough to limit sink current. Use the manufacturer output-saturation and output-current tables with the actual load capacitance before fixing the final value.
What is the TI equivalent for the STMicroelectronics LM239DT?
The TI LM239 family is the principal cross-brand equivalent to evaluate for the STMicroelectronics LM239DT. TI identifies the LM239 as a commercial-grade quad differential comparator and states that its B-version is a drop-in replacement for LM239, LM339, and LM2901 families. For a board redesign, select a TI orderable code in the 14-pin SO package and verify every electrical limit, temperature grade, and footprint detail rather than substituting the generic family name alone.

Mühendislik referans verileri: LM239DT — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the LM239DT when a board needs four independent low-power voltage comparisons, open-collector outputs, and operation from either a single or split supply in an SO-14 footprint. It is a practical choice for industrial threshold detection, battery monitoring, window comparison, and protection logic because one package can consolidate several independent functions. Select the STMicroelectronics LM239AMDREP when the 2 mV maximum A-version offset is preferable to the standard LM239 offset, accepting that its ordering code and packing designation must be checked. Consider LM339DT only after confirming that its electrical limits remain appropriate, since it belongs to a related but distinct comparator family. For a cross-brand redesign, evaluate the TI LM239 B-version family because TI identifies it as a drop-in replacement for LM239-family devices, but verify the exact SO-14 orderable code, temperature grade, propagation delay, output ratings, and lifecycle status before substituting it.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün LM239D LM239AMDREP LM339DT LM239D LM239
Package SO-14 SO-14 SO-14 SO-14 SO-14 SO-14
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics Texas Instruments Texas Instruments
Comparator Channels 4 4 4 4 4 4
Output Type Open collector Open collector Open collector Open collector Open collector Open collector

Ana Farklılayıcılar

  • Four independent channels in one 14-pin SO package (karşılaştırma:LM239D)
  • A-version precision option is available for closer threshold decisions (karşılaştırma:LM239AMDREP)
  • Single- and split-supply flexibility (karşılaştırma:LM239D)

Tasarım Notları

Place the LM239DT close to the signals being compared and keep the four input routes short to reduce susceptibility to switching noise. Route the open-collector outputs and their pull-up resistors away from sensitive comparator inputs, and use a continuous ground reference for all channels. Because the device contains four independent comparators in one package, consistent input filtering across all channels can help prevent channel-to-channel behavior differences.

Provide local supply decoupling at the LM239DT and select the bypass capacitor using the stability and transient-response guidance in the manufacturer datasheet. Keep the pull-up voltage below the applicable output and supply limits. If the board uses split supplies, verify the common-mode and differential input ranges for both positive and negative rail conditions rather than assuming that the single-supply configuration applies equally.

Do not treat the open-collector output as a push-pull logic output: every channel requires an external pull-up for normal operation. Choose the resistor from the required sink current, output-low voltage, destination-logic input current, and output rise-time requirement. Also confirm that the compared input voltages remain within the common-mode range across temperature, supply tolerance, and resistor-divider error.

Separate low-level input traces from output pull-up loops and high-current switching paths. When two channels form a window comparator, route their threshold-network connections symmetrically to minimize channel mismatch and timing skew. Place any hysteresis components close to the relevant inputs, and inspect the assembled board for leakage paths, contamination, and unstable references that could shift the decision threshold.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The LM239 family description and package are identified, but specific environmental declarations and qualification statements for the LM239DT ordering code are not present in the manufacturer references.

Veri doğrulanma tarihi: 2026-11-10 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

lm239dt datasheet lm239dt datasheet pdf lm239dt pinout lm239dt equivalent lm239dt replacement lm239dt cross reference lm239dt vs lm239d lm239dt price lm239dt stock stmicroelectronics lm239dt lm239dt so-14 pinout lm239dt window comparator lm239dt battery monitoring lm239dt open collector pull-up

İlgili Bileşenler ve Terimler

STMicroelectronics LM239DT LM239 LM239D LM239AMDREP LM339DT Texas Instruments quad voltage comparator differential comparator analog comparator comparator IC integrated circuit semiconductor open-collector output single-supply operation split-supply operation common-mode input voltage differential input voltage input offset voltage SO-14 surface-mount package CMOS TTL industrial sensor interface battery monitoring
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle