onsemi

LM258DMR2G - Dual 3-32V Low-Bias Op Amp | onsemi

N.º da peça: LM258DMR2G ✓ Ativo
3 V to 32 V Vdss 8-pin MSOP Package
MOQ: 1 |

LM258DMR2G Visão geral

onsemi LM258DMR2G is a dual general-purpose operational amplifier designed for single-supply or split-supply operation from 3 V to 32 V. The device uses a low-bias circuit configuration and is specified for a -25 °C to +85 °C temperature range. It is packaged in an 8-pin MSOP package, making it suitable for compact analog signal-conditioning, sensor-conditioning, and industrial control designs.

A dual operational amplifier combines two independent amplifier channels in one package, allowing designers to use one IC for gain stages, buffering, comparisons, feedback loops, and signal conditioning. The LM258 family is based on circuit designs used in quad operational amplifiers, while the dual configuration provides two channels in a smaller package than a quad device. Its common-mode input range extends to ground and VEE, which is useful in circuits powered from a single positive rail where the signal can approach the lower supply rail.

The principal feature of the LM258DMR2G is its low-bias operating arrangement, intended for lower-power analog systems while retaining the broad 3 V to 32 V supply capability of the LM258 family. Single-supply operation allows the amplifier to work with a positive supply and ground reference, while split-supply operation supports bipolar signal systems. The broad operating range covers low-voltage control systems, 5 V and 12 V powered instrumentation, industrial automation, and general-purpose analog boards.

The 8-pin MSOP package requires careful PCB layout, particularly around input bias-current paths, output driving, supply decoupling, and thermal management. Input and output capacitors should be placed close to the relevant pins, with supply bypass capacitance placed immediately across the supply and ground connections. The dual-channel arrangement can reduce external component count in applications that need two similar amplifier functions, such as two sensor channels or a filter followed by an output driver.

LM258DMR2G is identified by onsemi as an 8-MSOP dual amplifier. The -25 °C to +85 °C rating supports industrial-temperature applications, while the 3 V to 32 V supply range provides flexibility across multiple rail voltages. The general-purpose architecture is appropriate when the design does not require the lower offset voltage, higher bandwidth, rail-to-rail output, or lower noise associated with more specialized precision amplifier families.

This product page combines the manufacturer and distributor information with package, application, comparison, and design guidance for engineers evaluating the LM258DMR2G. For current commercial information, use the Request a Quote form on this page. Confirm the final pinout, electrical limits, recommended decoupling, and package tolerances against the current onsemi datasheet before releasing a production design.

Alternativas drop-in para LM258DMR2G — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com LM258DMR2G (mesmo formato e footprint) — diferindo em Supply Configuration, Common-Mode Input Range, Operating Temperature Range, Package, Product Type.

onsemi
Supply Configuration: Single or split supply
Common-Mode Input Range: Extending to ground/VEE
Operating Temperature Range: -25 °C to 85 °C
Comparar com LM258DMR2G →
onsemi
Common-Mode Input Range: Extends to ground or VEE
Package: 8-MSOP
Product Type: General-purpose operational amplifier
Comparar com LM258DMR2G →

LM258DMR2

✅ Drop-In
onsemi
📦 8-MSOP
2 channels · 2 circuits · 1 MHz · 3 V to 32 V · 45 nA typical · 800 µA per channel typical · Extends to ground or VEE · Single supply or split supply

Consulte o preço

Ver ficha técnica →

LM258DG

✅ Drop-In
onsemi
📦 8-MSOP
General Purpose · 2 circuits · 1 MHz · 0.6 V/µs · 3 V · 32 V · -25 °C to 85 °C · 8-SOIC (0.154 in, 3.90 mm width)

Consulte o preço

Ver ficha técnica →

LM258DMR2G Classificações máximas e características elétricas

Product Type Dual general-purpose operational amplifier
Number of Amplifier Channels 2 channels
Supply Voltage Range 3 V to 32 V
Supply Configuration Single supply or split supply
Input Common-Mode Range Extends to ground/VEE
Bias Configuration Low bias
Faixa de temperatura de operação -25 °C to +85 °C
Package Type 8-pin MSOP
Tipo de montagem Surface mount
Channel Count 2
Input Type General-purpose amplifier input
Supply Polarity Positive, single supply or split supply

Configuração de pinos do LM258DMR2G

MSOP-8 Package Pinout Diagram MSOP-8 3x3mm, P0.65mm, JEDEC MO-187. 1 8 2 7 3 6 4 5 MSOP-8
Pino 1 OUT A — Amplifier A output
Pino 2 IN A- — Amplifier A inverting input
Pino 3 IN A+ — Amplifier A non-inverting input
Pino 4 V- — Negative supply or ground
Pino 5 IN B+ — Amplifier B non-inverting input
Pino 6 IN B- — Amplifier B inverting input
Pino 7 OUT B — Amplifier B output
Pino 8 V+ — Positive supply

Aplicações típicas

LM258DMR2G é adequado para 6 aplicaçãos: Industrial Sensor Conditioning, Power-Supply Feedback Control, Two-Channel Data Acquisition Front End, Audio Signal Buffering, Process Control Loops, Portable and Battery-Powered Measurement.

🏭

Industrial Sensor Conditioning

The LM258DMR2G is suitable for conditioning sensors whose outputs are referenced close to ground in 5 V, 12 V, or higher single-supply systems. Its two channels can amplify one sensor signal while providing a second channel for buffering, level shifting, or active filtering. The common-mode input range extending to ground/VEE is particularly useful when a transducer output has little headroom above the lower rail. The 3 V to 32 V supply range also allows the same amplifier family to serve multiple industrial control rails. Layout should keep input traces short, place input compensation components close to their pins, and provide local supply bypass to reduce coupling from digital switching stages.

⚡

Power-Supply Feedback Control

The LM258DMR2G can serve as the error amplifier in an adjustable linear power-supply feedback loop. Its low-bias configuration suits systems where continuous amplifier current must remain modest, and its 3 V to 32 V supply rating permits operation from low-voltage auxiliary rails through conventional industrial supply voltages. One channel may monitor the output divider while the other supports an additional signal path. Stability depends on the power-stage transfer function, compensation network, and feedback-loop layout, so evaluate the complete regulator rather than treating the amplifier as a standalone block.

🖥️

Two-Channel Data Acquisition Front End

Two independent LM258DMR2G amplifier channels can process two analog inputs in a compact data-acquisition design. The device supports single-supply operation from 3 V to 32 V and accepts input signals whose common-mode range extends toward ground/VEE, which simplifies systems whose sensor outputs sit near the lower rail. One channel can provide gain for a sensor while the second performs anti-alias filtering or drives an ADC input. Choose resistor values for the required signal range, verify the ADC input limits, and keep high-impedance input nodes away from switching nodes and digital return currents.

🎧

Audio Signal Buffering

The LM258DMR2G can buffer line-level or preamp signals in compact general-purpose audio equipment while operating from a single positive rail. Its two channels allow one stage to buffer an input and the other to drive a following gain or mixing circuit. The common-mode input range extending to ground/VEE helps preserve small signals near the lower rail, although the designer should verify output swing and load compatibility at the intended supply voltage. Place the audio input network close to the relevant amplifier pins and return output-current paths directly to a stable ground reference to reduce audible hum.

🔧

Process Control Loops

In a 12 V or 24 V process-control module, the LM258DMR2G can implement error amplification for a control loop or provide two low-power analog channels around an actuator interface. The 3 V to 32 V supply range covers common industrial rails, while the -25 °C to +85 °C operating range suits controlled equipment environments. The broad common-mode range extending to ground/VEE supports sensors referenced to the lower rail. For safety and reliability, include input protection, verify startup behavior, maintain input and output common-mode limits, and isolate sensitive feedback traces from switching power stages.

📱

Portable and Battery-Powered Measurement

The LM258DMR2G fits portable measurement modules that use a low-voltage single supply and need two general-purpose analog channels. Its low-bias architecture is useful when every milliampere of amplifier supply current affects battery life, and the 3 V minimum supply rating supports low-energy operating rails. One channel can amplify a sensor while the second provides active filtering or a buffered reference path. Choose resistor values that account for the amplifier input-bias-current error, use low-leakage capacitors where necessary, and confirm that the selected battery voltage remains within the device limits during transients.

What is the LM258DMR2G?
The onsemi LM258DMR2G is a dual general-purpose operational amplifier with two amplifier channels in an 8-pin MSOP package. It operates from 3 V to 32 V and supports single-supply or split-supply configurations. According to the onsemi LM258 datasheet information, the circuit uses a low-bias design and provides a common-mode input range extending to ground/VEE. These characteristics make it suitable for general-purpose industrial analog signal conditioning where a compact package and flexible supply range are more important than precision or rail-to-rail performance.
What is the supply voltage range of the LM258DMR2G?
The LM258DMR2G operates from 3 V to 32 V. According to onsemi product information, the amplifier can be powered from a single positive supply or from split supplies, giving the designer flexibility in battery-powered, 5 V, 12 V, and higher-voltage analog systems. The input common-mode range extends to ground/VEE, so the device is particularly useful in single-supply circuits where the signal can operate close to the lower supply rail.
What is the LM258DMR2G package?
The LM258DMR2G is supplied in an 8-pin MSOP package. The distributor product listings identify the device as a two-circuit, 8-MSOP operational amplifier, while the onsemi datasheet defines the associated pin arrangement and electrical characteristics. Because MSOP is a surface-mount package, the PCB land pattern must follow the package drawing and the pin numbering must be checked against the datasheet pin-description table before assembly.
Is the LM258DMR2G suitable for single-supply operation?
Yes, the LM258DMR2G is suitable for single-supply operation because the onsemi LM258 family supports operation from a positive supply and ground, with the common-mode input range extending to ground/VEE. This makes it useful for sensor signals and control circuits that are referenced to ground. Designers should still verify the required output swing and input range against the actual operating voltage and load conditions.
Where can I find the LM258DMR2G datasheet PDF?
The LM258DMR2G datasheet PDF can be located through the onsemi LM258 datasheet listing and the manufacturer-linked result included on this page. The document identifies the LM258 family electrical characteristics, package information, pin descriptions, and application guidance. Use the onsemi documentation for final design release because distributor-hosted copies can be an older mirror of the original manufacturer document.
Where can I find the LM258DMR2G pinout?
The LM258DMR2G pinout is shown in the pin-description table of the onsemi LM258 datasheet. The package is an 8-pin MSOP, so the complete package has eight numbered positions and includes the two-amplifier channel assignments, supply pins, and output pins. Assign PCB tracks from the package drawing and pin table together, and do not infer pin functions from another package variant.
What are the key specifications of LM258DMR2G that engineers should know?
The key LM258DMR2G specifications are a 3 V to 32 V supply range, two amplifier channels, low-bias operation, a common-mode input range extending to ground/VEE, and a -25 °C to +85 °C ambient operating range. According to onsemi documentation, the device supports single-supply or split-supply use and is packaged in an 8-pin MSOP. These characteristics define its position as a general-purpose, industrial-temperature dual amplifier.
What can replace the LM258DMR2G?
The closest onsemi replacement identified for the same 8-MSOP family is the LM258DMR2, which is also listed as a two-circuit, 8-MSOP general-purpose amplifier. Before using it as a drop-in replacement, confirm the ordering suffix, temperature grade, pinout, and electrical limits against the current onsemi datasheet. Other dual op-amp families may offer different offset, bandwidth, noise, or output-swing specifications and should not be treated as automatic replacements.
Is the LM258DMR2G the same as the LM258DMR2?
The LM258DMR2G and LM258DMR2 are closely related onsemi orderable versions, and both are listed as dual general-purpose amplifiers in an 8-MSOP package. The orderable suffixes and delivery form should still be checked in the manufacturer ordering table before substitution. Functional equivalence requires matching the electrical grade, temperature range, pin configuration, and production packing requirements.
Where to buy LM258DMR2G online?
Use the Request a Quote form on this page to request the LM258DMR2G with your required quantity, packaging, and delivery information. The form is the appropriate channel for current commercial availability, quotation, and lead-time confirmation without relying on a static listing that may not reflect current inventory.
What is the price of the LM258DMR2G?
The current commercial price for the LM258DMR2G is handled through the Request a Quote form on this page. The form allows quantity and delivery requirements to be considered together and avoids presenting a potentially stale unit figure as a current quotation.
What is the lead time for the LM258DMR2G?
The current lead time for the LM258DMR2G should be requested through the Request a Quote form on this page. Include the annual and prototype quantities, required package form, and target delivery date so the commercial response reflects the actual production plan.
Is the LM258DMR2G in stock?
Inventory status changes by region, quantity, and order form, so the LM258DMR2G should be checked through the Request a Quote form on this page. Submit the required quantity and delivery details to receive a current availability and lead-time response for the part.
When should I choose the LM258DMR2G over a precision amplifier?
Choose the LM258DMR2G when the design needs two general-purpose channels, a 3 V to 32 V supply range, single-supply capability, and an industrial-temperature grade of -25 °C to +85 °C. A precision amplifier is preferable when the application requires lower input offset, lower input bias current, tighter linearity, lower noise, or rail-to-rail output. The LM258DMR2G is best suited to ordinary industrial control and signal-conditioning functions.
LM258DMR2G vs LM2902 - which is better for industrial control?
The LM258DMR2G is the better-documented choice for this exact onsemi 8-MSOP selection because its distributor and manufacturer records identify the dual general-purpose amplifier, 3 V to 32 V supply range, and -25 °C to +85 °C grade. LM2902-family devices may offer different temperature or supply variants, so select one only after confirming its exact orderable MPN, package, pinout, and electrical ratings. For a new design centered on the LM258DMR2G, using the exact documented part reduces qualification risk.
Can the LM258DMR2G replace the LM258DMR2 in an existing PCB?
The LM258DMR2 can be considered as a drop-in candidate for the LM258DMR2G because both are listed as onsemi 8-MSOP dual general-purpose amplifiers, but the orderable suffix and delivery form must be verified before substitution. Confirm the pinout, temperature grade, supply limits, and production packing requirements in the onsemi ordering information. A PCB footprint match alone does not establish full qualification.

Dados de referência de engenharia para LM258DMR2G — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the LM258DMR2G for compact, general-purpose dual-amplifier designs that operate from a 3 V to 32 V rail, especially single-supply systems whose signals extend toward ground/VEE. Its two channels can reduce component count when implementing gain, filtering, buffering, or feedback functions, and its -25 °C to +85 °C rating is appropriate for many industrial environments. Select a precision amplifier instead when low offset, low bias current, low noise, or rail-to-rail output is essential. Consider the LM258DMR2 for onsemi continuity when its ordering suffix, temperature grade, and delivery form match the production requirement. LM258DG should not be treated as a board-level drop-in replacement because it is identified as an 8-SOIC rather than an 8-MSOP device; it requires a different PCB footprint. For any substitute, verify the pinout, common-mode range, output swing, supply current, compensation requirements, and temperature grade against the current manufacturer datasheet.

Comparação com alternativas

Parâmetro Este produto LM258DMR2 LM258DG
Brand onsemi onsemi onsemi
Package 8-MSOP 8-MSOP 8-SOIC
Amplifier Channels 2 2 2
Orderable Suffix DMR2G DMR2 DG

Principais diferenciais

  • Broad single-supply operating range (vs LM258DMR2)
  • Ground-referenced input capability (vs LM258DG)
  • Two channels in a compact MSOP (vs LM258DG)

Notas de projeto

Place the input compensation components and feedback resistors directly beside the LM258DMR2G pins they serve. Keep the two amplifier channels physically separate from switching-regulator inductors, high-current output traces, and digital clock lines. For the 8-MSOP footprint, verify courtyard clearance, solder-mask expansion, paste volume, and assembly tolerances using the onsemi package drawing rather than relying on a generic MSOP footprint.

Use local supply bypass capacitance from each supply pin to the corresponding ground reference, with the shortest possible current loop. The LM258DMR2G supports a 3 V to 32 V supply range, but the selected rail must also provide adequate headroom for the required input and output swing. Account for input-bias-current error when using high-source-impedance sensors, and review output-swing limits under the intended load.

Do not assume that every LM258-family ordering code is mechanically interchangeable. The LM258DMR2 and LM258DMR2G are identified as 8-MSOP devices, while LM258DG is identified as an 8-SOIC and therefore requires a different footprint. Confirm the exact package, pinout, temperature grade, and electrical limits before substitution, especially when replacing an existing production design.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The operating-temperature classification is -25 °C to +85 °C. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current onsemi product documentation or material declaration.

Dados verificados em: 2026-11-20 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

LM258DMR2G datasheet LM258DMR2G pinout LM258DMR2G datasheet pdf onsemi LM258DMR2G LM258DMR2G 8-MSOP LM258DMR2G 3-32V amplifier LM258DMR2G equivalent LM258DMR2G replacement LM258DMR2G vs LM258DMR2 LM258DMR2G price LM258DMR2G stock LM258DMR2G industrial sensor

Componentes & termos relacionados

onsemi LM258DMR2G LM258DMR2 LM258DG dual operational amplifier general-purpose amplifier low-bias amplifier single-supply operation split-supply operation common-mode input range ground/VEE 3 V to 32 V -25 °C to +85 °C 8-MSOP MSOP family surface-mount package analog signal conditioning industrial control power-supply feedback data acquisition audio buffering RoHS REACH AEC-Q100
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ