LM258DMR2G - Dual 3-32V Low-Bias Op Amp | onsemi
Référence : LM258DMR2G ✓ ActifLM258DMR2G Présentation
A dual operational amplifier combines two independent amplifier channels in one package, allowing designers to use one IC for gain stages, buffering, comparisons, feedback loops, and signal conditioning. The LM258 family is based on circuit designs used in quad operational amplifiers, while the dual configuration provides two channels in a smaller package than a quad device. Its common-mode input range extends to ground and VEE, which is useful in circuits powered from a single positive rail where the signal can approach the lower supply rail.
The principal feature of the LM258DMR2G is its low-bias operating arrangement, intended for lower-power analog systems while retaining the broad 3 V to 32 V supply capability of the LM258 family. Single-supply operation allows the amplifier to work with a positive supply and ground reference, while split-supply operation supports bipolar signal systems. The broad operating range covers low-voltage control systems, 5 V and 12 V powered instrumentation, industrial automation, and general-purpose analog boards.
The 8-pin MSOP package requires careful PCB layout, particularly around input bias-current paths, output driving, supply decoupling, and thermal management. Input and output capacitors should be placed close to the relevant pins, with supply bypass capacitance placed immediately across the supply and ground connections. The dual-channel arrangement can reduce external component count in applications that need two similar amplifier functions, such as two sensor channels or a filter followed by an output driver.
LM258DMR2G is identified by onsemi as an 8-MSOP dual amplifier. The -25 °C to +85 °C rating supports industrial-temperature applications, while the 3 V to 32 V supply range provides flexibility across multiple rail voltages. The general-purpose architecture is appropriate when the design does not require the lower offset voltage, higher bandwidth, rail-to-rail output, or lower noise associated with more specialized precision amplifier families.
This product page combines the manufacturer and distributor information with package, application, comparison, and design guidance for engineers evaluating the LM258DMR2G. For current commercial information, use the Request a Quote form on this page. Confirm the final pinout, electrical limits, recommended decoupling, and package tolerances against the current onsemi datasheet before releasing a production design.
Alternatives de remplacement direct pour LM258DMR2G — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec LM258DMR2G (même facteur de forme et même empreinte) — différant par Supply Configuration, Common-Mode Input Range, Operating Temperature Range, Package, Product Type.
LM258DMR2
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →LM258DG
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →LM258DMR2G Valeurs maximales et caractéristiques électriques
| Product Type | Dual general-purpose operational amplifier |
| Number of Amplifier Channels | 2 channels |
| Supply Voltage Range | 3 V to 32 V |
| Supply Configuration | Single supply or split supply |
| Input Common-Mode Range | Extends to ground/VEE |
| Bias Configuration | Low bias |
| Plage de température de fonctionnement | -25 °C to +85 °C |
| Package Type | 8-pin MSOP |
| Type de montage | Surface mount |
| Channel Count | 2 |
| Input Type | General-purpose amplifier input |
| Supply Polarity | Positive, single supply or split supply |
Configuration des broches de LM258DMR2G
| Broche 1 | OUT A — Amplifier A output |
| Broche 2 | IN A- — Amplifier A inverting input |
| Broche 3 | IN A+ — Amplifier A non-inverting input |
| Broche 4 | V- — Negative supply or ground |
| Broche 5 | IN B+ — Amplifier B non-inverting input |
| Broche 6 | IN B- — Amplifier B inverting input |
| Broche 7 | OUT B — Amplifier B output |
| Broche 8 | V+ — Positive supply |
Applications typiques
LM258DMR2G convient pour 6 applications: Industrial Sensor Conditioning, Power-Supply Feedback Control, Two-Channel Data Acquisition Front End, Audio Signal Buffering, Process Control Loops, Portable and Battery-Powered Measurement.
Industrial Sensor Conditioning
The LM258DMR2G is suitable for conditioning sensors whose outputs are referenced close to ground in 5 V, 12 V, or higher single-supply systems. Its two channels can amplify one sensor signal while providing a second channel for buffering, level shifting, or active filtering. The common-mode input range extending to ground/VEE is particularly useful when a transducer output has little headroom above the lower rail. The 3 V to 32 V supply range also allows the same amplifier family to serve multiple industrial control rails. Layout should keep input traces short, place input compensation components close to their pins, and provide local supply bypass to reduce coupling from digital switching stages.
Recommandé
Power-Supply Feedback Control
The LM258DMR2G can serve as the error amplifier in an adjustable linear power-supply feedback loop. Its low-bias configuration suits systems where continuous amplifier current must remain modest, and its 3 V to 32 V supply rating permits operation from low-voltage auxiliary rails through conventional industrial supply voltages. One channel may monitor the output divider while the other supports an additional signal path. Stability depends on the power-stage transfer function, compensation network, and feedback-loop layout, so evaluate the complete regulator rather than treating the amplifier as a standalone block.
Recommandé
Two-Channel Data Acquisition Front End
Two independent LM258DMR2G amplifier channels can process two analog inputs in a compact data-acquisition design. The device supports single-supply operation from 3 V to 32 V and accepts input signals whose common-mode range extends toward ground/VEE, which simplifies systems whose sensor outputs sit near the lower rail. One channel can provide gain for a sensor while the second performs anti-alias filtering or drives an ADC input. Choose resistor values for the required signal range, verify the ADC input limits, and keep high-impedance input nodes away from switching nodes and digital return currents.
Recommandé
Audio Signal Buffering
The LM258DMR2G can buffer line-level or preamp signals in compact general-purpose audio equipment while operating from a single positive rail. Its two channels allow one stage to buffer an input and the other to drive a following gain or mixing circuit. The common-mode input range extending to ground/VEE helps preserve small signals near the lower rail, although the designer should verify output swing and load compatibility at the intended supply voltage. Place the audio input network close to the relevant amplifier pins and return output-current paths directly to a stable ground reference to reduce audible hum.
Recommandé
Process Control Loops
In a 12 V or 24 V process-control module, the LM258DMR2G can implement error amplification for a control loop or provide two low-power analog channels around an actuator interface. The 3 V to 32 V supply range covers common industrial rails, while the -25 °C to +85 °C operating range suits controlled equipment environments. The broad common-mode range extending to ground/VEE supports sensors referenced to the lower rail. For safety and reliability, include input protection, verify startup behavior, maintain input and output common-mode limits, and isolate sensitive feedback traces from switching power stages.
Recommandé
Portable and Battery-Powered Measurement
The LM258DMR2G fits portable measurement modules that use a low-voltage single supply and need two general-purpose analog channels. Its low-bias architecture is useful when every milliampere of amplifier supply current affects battery life, and the 3 V minimum supply rating supports low-energy operating rails. One channel can amplify a sensor while the second provides active filtering or a buffered reference path. Choose resistor values that account for the amplifier input-bias-current error, use low-leakage capacitors where necessary, and confirm that the selected battery voltage remains within the device limits during transients.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour LM258DMR2G — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | LM258DMR2 | LM258DG |
|---|---|---|---|
| Brand | onsemi | onsemi | onsemi |
| Package | 8-MSOP | 8-MSOP | 8-SOIC |
| Amplifier Channels | 2 | 2 | 2 |
| Orderable Suffix | DMR2G | DMR2 | DG |
Principaux différenciateurs
- Broad single-supply operating range (vs LM258DMR2)
- Ground-referenced input capability (vs LM258DG)
- Two channels in a compact MSOP (vs LM258DG)
Notes de conception
Place the input compensation components and feedback resistors directly beside the LM258DMR2G pins they serve. Keep the two amplifier channels physically separate from switching-regulator inductors, high-current output traces, and digital clock lines. For the 8-MSOP footprint, verify courtyard clearance, solder-mask expansion, paste volume, and assembly tolerances using the onsemi package drawing rather than relying on a generic MSOP footprint.
Use local supply bypass capacitance from each supply pin to the corresponding ground reference, with the shortest possible current loop. The LM258DMR2G supports a 3 V to 32 V supply range, but the selected rail must also provide adequate headroom for the required input and output swing. Account for input-bias-current error when using high-source-impedance sensors, and review output-swing limits under the intended load.
Do not assume that every LM258-family ordering code is mechanically interchangeable. The LM258DMR2 and LM258DMR2G are identified as 8-MSOP devices, while LM258DG is identified as an 8-SOIC and therefore requires a different footprint. Confirm the exact package, pinout, temperature grade, and electrical limits before substitution, especially when replacing an existing production design.
Informations de conformité
The operating-temperature classification is -25 °C to +85 °C. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current onsemi product documentation or material declaration.