Texas Instruments

LM339ANSRG4 - 4x Open-Collector Comparator | Texas Instruments

N.º da peça: LM339ANSRG4 ✗ Fim de vida
2 V to 36 V Vdss 0.25 µA at 5 V Id 14-pin SOIC Package
MOQ: 1 |

LM339ANSRG4 Visão geral

Texas Instruments LM339ANSRG4 is a quad differential comparator containing four independent voltage comparators, an input voltage range of 2 V to 36 V, and open-collector outputs in a 14-pin SOIC package. The device can also operate from dual supplies of ±1 V to ±18 V, making it suitable for industrial and control circuits that compare signals above conventional logic levels.

A voltage comparator is an analog integrated circuit that compares two input voltages and changes its output state when the non-inverting input rises above the inverting input. The LM339 belongs to the comparator IC hierarchy, where it combines differential analog input handling with digital-compatible open-collector outputs. Unlike a comparator with a fixed push-pull output, the open-collector architecture allows multiple outputs to be wired together when suitable pull-up circuitry is provided.

Each of the four comparator channels has independent inputs and output. Key operating characteristics include a maximum input offset voltage of 3 mV at 30 V, input bias current of 0.25 µA at 5 V, and typical output current of 20 mA. The wide supply range permits operation from a single 2 V to 36 V source or from dual rails spanning ±1 V to ±18 V. A nominal 800 µA supply-current drain supports low-power operation when the system does not require continuous high-current output sinking.

The open-collector output stage is the core architectural feature. Each transistor output can pull a logic net low while an external resistor supplies the high state, allowing interface with TTL, CMOS, MOSFET, relay, or other open-collector peripherals. This arrangement also permits wired-AND behavior across several channels. The output transistor must never be allowed to float because no internal pull-up resistor is present in the output path.

Typical uses include industrial threshold detection, sensor signal conditioning, battery monitoring, overvoltage detection, window comparators, oscillator and relaxation timing circuits, and control logic for relays or power stages. The broad supply range is particularly useful in 12 V or 24 V industrial systems where the comparator inputs can tolerate voltages above the logic supply level.

Layout should keep input traces short, maintain a stable ground reference, and place pull-up resistors close to the output nets. Because open-collector outputs can switch relatively large currents, check the absolute-maximum output voltage and current limits before driving a load. A pull-up resistor that is too large produces slow rising edges, while an undersized resistor can exceed the output-current limit.

This page organizes the electrical limits, pin mapping, drop-in alternatives, application guidance, and design trade-offs of the LM339ANSRG4. It also identifies the important distinction between the obsolete ordering code and currently documented alternatives before a PCB design is revised.

Alternativas drop-in para LM339ANSRG4 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com LM339ANSRG4 (mesmo formato e footprint) — diferindo em Package, Comparator Type, Supply Current, Output Type, Input Offset Voltage.

Texas Instruments
Package: 14-pin SOIC (D)
Comparator Type: Low-power, low-offset voltage comparator
Supply Current: 1 mA
onsemi
Package: 14-SOIC
Comparator Type: General Purpose
Supply Current: 1 mA typical
Comparar com LM339ANSRG4 →
Texas Instruments
Package: 14-pin SOIC (D)
Comparator Type: General-purpose precision
Supply Current: 800 uA typical

LM339DR2G

✅ Drop-In
onsemi
📦 SOIC-14
General Purpose · 4 channels · 3 V to 36 V · Single · 1.3 us · 25 nA typical · ±5 nA typical · 1 mA typical

Consulte o preço

Ver ficha técnica →

LM339MX/NOPB

✅ Drop-In
Texas Instruments
📦 SOIC-14
General-purpose precision · 4 channels · 1.3 us · 2 mV maximum for all four comparators · 800 uA typical · 2 V to 36 V · -18 V to +18 V · Open collector

Consulte o preço

Ver ficha técnica →

LM339AM/NOPB

✅ Drop-In
Texas Instruments
📦 SOIC-14
Low-power, low-offset voltage comparator · 4 independent comparators · 2 V to 36 V · ±18 V · 1.3 µs · 2 mV maximum for all four comparators · 1 mA · Open-collector

Consulte o preço

Ver ficha técnica →

LM339ANS

✅ Drop-In
📦 SOIC-14
0 pin-count difference and no functional-pin change from the target orderable code

📋 Alternativa de referência (fora do catálogo)

LP339MX/NOPB

✅ Drop-In
📦 SOIC-14
0 pin-count difference; retains 14-pin SOIC placement for four-channel open-collector comparisons

📋 Alternativa de referência (fora do catálogo)

LM339ANSRG4 Classificações máximas e características elétricas

Comparator Configuration 4 independent differential comparators
Single Supply Voltage Range 2 V to 36 V
Dual Supply Voltage Range ±1 V to ±18 V
Tested Supply Limits 30 V for non-V devices; ±15 V for non-V devices
Input Offset Voltage 3 mV maximum at 30 V
Input Bias Current 0.25 µA at 5 V
Supply Current Drain 800 µA typical
Tipo de saída Open-collector
Typical Output Current 20 mA
Compatible Logic Levels TTL and CMOS
Faixa de temperatura de operação 0 °C to 70 °C
Encapsulamento 14-pin SOIC
Package Width 5.30 mm
Tipo de montagem Surface mount
Status RoHS Compliant
Número de pinos 14 pins

Configuração de pinos do LM339ANSRG4

SOIC-14 (3.9mm) Package Pinout Diagram SOIC-14 14-pin small outline IC, 3.9x8.7mm, P1.27mm, JEDEC MS-012. Pin 1 by chamfer. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 SOIC-14 (3.9mm)
Pino 1 OUT 1 — Open-collector output of comparator 1
Pino 2 IN 1- — Inverting input of comparator 1
Pino 3 IN 1+ — Non-inverting input of comparator 1
Pino 4 GND — Ground reference
Pino 5 IN 2+ — Non-inverting input of comparator 2
Pino 6 IN 2- — Inverting input of comparator 2
Pino 7 OUT 2 — Open-collector output of comparator 2
Pino 8 OUT 3 — Open-collector output of comparator 3
Pino 9 IN 3+ — Non-inverting input of comparator 3
Pino 10 IN 3- — Inverting input of comparator 3
Pino 11 VCC — Positive supply input
Pino 12 IN 4+ — Non-inverting input of comparator 4
Pino 13 IN 4- — Inverting input of comparator 4
Pino 14 OUT 4 — Open-collector output of comparator 4

Aplicações típicas

LM339ANSRG4 é adequado para 6 aplicaçãos: Industrial Threshold Detection, Sensor Signal Conditioning, Battery Voltage Monitoring, Overvoltage and Undervoltage Protection, Relay and Solenoid Control, Oscillator and Timing Circuits.

🏭

Industrial Threshold Detection

The LM339ANSRG4 fits industrial threshold-detection circuits because its 2 V to 36 V single-supply range accommodates 12 V and 24 V control systems. Each of its four differential channels can compare a scaled sensor voltage with a reference and produce an open-collector alarm or logic transition. The 3 mV maximum input offset voltage at 30 V provides a defined starting point for error analysis, while the 0.25 µA input bias current at 5 V helps limit sensor-loading effects. Add a pull-up resistor to every output used as a logic signal, and ensure the resistor and wiring satisfy the 20 mA typical output-current capability of the device.

🧩

Sensor Signal Conditioning

The LM339ANSRG4 can condition slow sensor signals by comparing them against adjustable thresholds generated with resistor dividers. Its wide ±1 V to ±18 V dual-supply capability permits bipolar input arrangements when a sensor output crosses ground, while the four independent channels can implement hysteresis, upper-limit detection, lower-limit detection, and fault signaling. Input bias current of 0.25 µA at 5 V helps avoid excessive loading on high-impedance dividers, although the complete input-network resistance must be evaluated. Open-collector outputs simplify interfacing with 3.3 V or 5 V control logic because the pull-up supply can be selected independently from the comparator supply.

⚡

Battery Voltage Monitoring

The LM339ANSRG4 is suitable for battery-pack monitoring because its input range extends to 36 V and each channel can compare a divided battery voltage against a precise reference. Four channels allow separate supervision of individual cells, a pack maximum, and a pack minimum. The open-collector output can directly pull down a shared fault line when several protection events occur, although the line requires an external pull-up. Validate divider power dissipation at the highest pack voltage, include comparator offset in the protection margin, and confirm that the selected operating-temperature grade covers the battery application's environmental range.

🔧

Overvoltage and Undervoltage Protection

The LM339ANSRG4 can implement overvoltage and undervoltage protection in power systems by comparing divided rail voltages with reference levels. Its broad supply range permits operation near many industrial rails, while the four independent comparator channels support positive-limit, negative-limit, and combined fault outputs. The 3 mV maximum input offset voltage at 30 V contributes directly to the protection threshold uncertainty and must be combined with reference and resistor tolerances. Open-collector fault outputs can be wired together, but the shared pull-up resistor must be selected so that the worst-case sink current remains within the output rating.

🏭

Relay and Solenoid Control

The LM339ANSRG4 can control relay or solenoid drivers by comparing a command voltage with a feedback threshold and sinking the input current of an external transistor stage. The open-collector architecture works naturally with NPN transistor gates because the output must sink current to establish a low state. Its 20 mA typical output current provides the basis for sizing the transistor base or gate-bias network, while the wide supply range accommodates industrial control voltages. Keep relay-coil transients away from comparator inputs, provide adequate supply bypassing, and confirm the transistor's current and voltage ratings rather than relying on the comparator alone to absorb the coil energy.

📡

Oscillator and Timing Circuits

The LM339ANSRG4 can form a relaxation oscillator or monostable timing circuit using its differential inputs and open-collector output. The feedback network determines the oscillation or delay interval, while an external pull-up produces a usable digital output waveform. Four channels allow independent timers or a combination of repetitive and one-shot functions. The 3 mV maximum offset voltage at 30 V affects switching thresholds, and the open-collector rise time depends on the external pull-up resistance and total capacitance. Test timing across the expected supply range and include transistor saturation delay when the comparator output drives additional circuitry.

Resumo dos produtos recomendados

What is the LM339ANSRG4?
The LM339ANSRG4 is a quad differential comparator from Texas Instruments with four independent comparison channels, open-collector outputs, and a 14-pin SOIC package. According to the Texas Instruments datasheet, it supports a single supply from 2 V to 36 V or dual supplies from ±1 V to ±18 V, making it appropriate for industrial threshold detection, sensor conditioning, and control circuits.
What are the key specifications of LM339ANSRG4 that engineers should know?
The LM339ANSRG4 provides four independent differential comparators, a 2 V to 36 V single-supply range, open-collector outputs, and a 14-pin SOIC package. According to the Texas Instruments datasheet, the maximum input offset voltage is 3 mV at 30 V, input bias current is 0.25 µA at 5 V, and typical output current is 20 mA.
What is the operating voltage of LM339ANSRG4?
The LM339ANSRG4 operates from 2 V to 36 V on a single supply or from ±1 V to ±18 V on dual supplies. According to the Texas Instruments datasheet, the non-V device is tested at 30 V single-supply operation and ±15 V dual-supply operation. The appropriate limits must be observed for both the supply pins and the input pins.
Where can I download the LM339ANSRG4 datasheet PDF?
The official LM339ANSRG4 datasheet PDF is available from the Texas Instruments product documentation at https://www.ti.com/lit/ds/symlink/lm339.pdf. The document contains the complete pin description, electrical characteristics, absolute-maximum ratings, and application information. Use the manufacturer's pin-description table when assigning PCB tracks or checking the 14-pin SOIC footprint.
Where can I find the LM339ANSRG4 pinout?
The LM339ANSRG4 uses a 14-pin SOIC footprint with four complete differential comparator channels. Pins 1, 7, 8, and 14 are outputs; pins 2, 3, 5, 6, 9, 10, 12, and 13 are differential inputs; pin 4 is ground; and pin 11 is the supply input. Confirm every connection against the Texas Instruments datasheet before fabrication.
Why does the LM339ANSRG4 need a pull-up resistor?
The LM339ANSRG4 uses open-collector outputs that can sink current and pull a node low, but they cannot actively drive a high state. An external pull-up resistor connects each output node to a suitable positive supply, typically 5 V or 3.3 V in mixed-signal systems. Without a pull-up, the output node floats and the comparator state cannot be interpreted reliably.
Is LM339ANSRG4 suitable for 12 V and 24 V industrial control systems?
The LM339ANSRG4 is suitable for many 12 V and 24 V industrial control systems because it supports a 2 V to 36 V single-supply range. Its inputs can operate across a broad voltage range, while open-collector outputs permit wired-AND operation and interfacing with relay or logic circuits. Confirm signal amplitudes, output pull-up voltage, temperature requirements, and current limits for the specific system.
What is the difference between LM339ANSRG4 and LM339DR2G?
Both devices use a 14-pin SOIC package and provide four open-collector differential comparators, but the ordering codes identify different manufacturer variants and qualification conditions. The LM339DR2G is listed by Texas Instruments as a compatible substitute in the LM339 cross-reference material. Verify the temperature grade, lifecycle status, and electrical limits in the datasheet for the exact orderable part before substitution.
LM339ANSRG4 vs LM339MX/NOPB - which is better for a legacy 14-pin design?
The LM339ANSRG4 and LM339MX/NOPB both implement the familiar four-channel open-collector comparator architecture in a 14-pin SOIC package. The LM339MX/NOPB can be considered for a legacy footprint when its exact qualification and lifecycle details satisfy the design. For new production, select the part with the healthier lifecycle status and obtain a written manufacturer cross-reference before release.
When should I choose LM339ANSRG4 over LM339MX/NOPB?
Choose the LM339ANSRG4 only when the original BOM specifies that exact orderable device and its documented operating limits match the system. For an ongoing production design, LM339MX/NOPB may be more practical if it is the actively supported ordering code. Because the original LM339ANSRG4 is obsolete, lifecycle confirmation and controlled substitution are more important than minor ordering-code differences.
Is LM339ANSRG4 suitable for temperature monitoring and window comparison?
The LM339ANSRG4 is suitable for temperature monitoring and window comparison when its 3 mV maximum input offset voltage at 30 V is adequate for the required accuracy. Four independent channels can compare upper and lower thresholds, creating a window signal. Offset error, input bias current, sensor noise, and resistor tolerances should be included in the overall error budget.
What can replace LM339ANSRG4?
The closest documented replacements include LM339DR2G, LM339MX/NOPB, LM339AM/NOPB, LM339ANS, and LP339MX/NOPB, each using a 14-pin SOIC configuration in the cited cross-reference material. Confirm pin functions, supply limits, temperature range, output-current capability, qualification, and lifecycle status for the selected orderable part. No unqualified cross-brand substitution should be made without manufacturer documentation.
Is LM339ANSRG4 the same as LM339DR2G?
The LM339ANSRG4 and LM339DR2G share the core four-channel, open-collector comparator configuration and the same 14-pin SOIC footprint. They are listed as compatible substitutes, but the ordering codes can still carry different qualification or lifecycle details. Treat the substitution as valid only after checking the LM339DR2G datasheet against the original circuit's voltage, current, temperature, and production requirements.
Where can I buy LM339ANSRG4 and what is its current lead time?
Use the Request a Quote form on this page to request LM339ANSRG4 availability, current lead time, and minimum order quantity. Because the device is listed as obsolete, quantity and delivery commitments should be confirmed before a new build is scheduled. The page's structured price fields are intentionally omitted when no qualifying quantity-break listing is available.
How much does LM339ANSRG4 cost and is it in stock?
Current commercial availability for the obsolete LM339ANSRG4 should be requested through the Request a Quote form on this page. The form allows the purchasing team to confirm pricing, stock, lot traceability, and the quantity required for the intended build. Because lifecycle and remaining inventory can change, do not base a production commitment on a historical listing or an unconfirmed stock statement.

Dados de referência de engenharia para LM339ANSRG4 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the LM339ANSRG4 only when the original BOM requires that exact orderable part and the design still uses a 14-pin SOIC footprint. Its defining strengths are a 2 V to 36 V single-supply range, four independent open-collector channels, a 3 mV maximum input offset voltage at 30 V, and a 0.25 µA input bias current at 5 V. Select LM339DR2G or LM339MX/NOPB when a controlled same-package substitution is needed for a legacy board, but verify lifecycle, qualification, and exact electrical limits first. LM339ANS is the closest ordering-code alternative with no functional-pin change. Use LP339MX/NOPB only after checking its individual specifications. Because the original device is obsolete, a new production design should prioritize a manufacturer-documented supported part rather than relying on unverified inventory.

Comparação com alternativas

Parâmetro Este produto LM339DR2G LM339MX/NOPB LM339AM/NOPB LM339ANS LP339MX/NOPB
Package SOIC-14 SOIC-14 - same package SOIC-14 - same package SOIC-14 - same package SOIC-14 - same package SOIC-14 - same package
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Number of Comparators 4 4 4 4 4 4
Output Type Open-collector Open-collector Open-collector Open-collector Open-collector Open-collector
Number of Pins 14 pins 14 pins - same 14 pins - same 14 pins - same 14 pins - same 14 pins - same
Mounting Type Surface mount Surface mount Surface mount Surface mount Surface mount Surface mount

Principais diferenciais

  • Exact 14-pin SOIC footprint continuity (vs LM339DR2G)
  • Broad industrial supply-voltage capability (vs LP339MX/NOPB)
  • Defined offset performance at high supply voltage (vs LM339AM/NOPB)

Notas de projeto

Never connect a pull-up resistor to ground on an open-collector output. The output transistor can sink current, but the high state is produced only when an external pull-up connects the node to a positive logic rail. Select the pull-up voltage to remain within the output pin's permitted voltage range, and choose a resistance that keeps worst-case sink current within the 20 mA typical output-current capability.

Connect the four differential inputs with short traces and maintain a low-impedance ground reference. Comparator input bias current of 0.25 µA at 5 V can shift thresholds when the source impedance is high, so use practical divider values rather than unnecessarily large resistors. Place the supply bypass capacitor close to pin 11 and connect ground return current directly to pin 4 to reduce supply and ground noise at the comparison inputs.

The open-collector architecture supports wired-AND operation, but every connected output must be capable of sinking the combined pull-up current. Check the maximum output-current limit, ensure only one output asserts the fault at a time when its state transition could create a large current spike, and include a suitable pull-up value for the total capacitance and required rise time.

Informações de conformidade

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

RoHS compliance is explicitly identified for LM339ANSRG4. REACH, lead-free, halogen-free, and conflict-minerals status are not established by the current component records.

Buscas relacionadas

LM339ANSRG4 datasheet LM339ANSRG4 pinout LM339ANSRG4 datasheet pdf LM339ANSRG4 equivalent LM339ANSRG4 replacement LM339ANSRG4 cross reference LM339ANSRG4 price LM339ANSRG4 stock LM339ANSRG4 vs LM339DR2G LM339ANSRG4 vs LM339MX/NOPB Texas Instruments LM339ANSRG4 LM339ANSRG4 SOIC-14 footprint LM339ANSRG4 open collector output LM339ANSRG4 industrial threshold detection LM339ANSRG4 battery voltage monitoring

Componentes & termos relacionados

Texas Instruments LM339ANSRG4 LM339DR2G LM339MX/NOPB LM339AM/NOPB LM339ANS LP339MX/NOPB quad differential comparator voltage comparator comparator IC logic IC analog integrated circuit open-collector output wired-AND logic TTL CMOS SOIC-14 SOIC package family surface mount SMD input offset voltage input bias current supply current drain industrial threshold detection battery voltage monitoring
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ