onsemi

LM339DTBR2G - Quad Open-Collector Comparator | onsemi

N.º da peça: LM339DTBR2G ✓ Ativo
3 V to 36 V Vdss 14-pin TSSOP Package
MOQ: 1 |

LM339DTBR2G Visão geral

The onsemi LM339DTBR2G is a quad differential comparator IC designed for single-supply operation from 3 V to 36 V. The device contains four independent comparator channels with open-collector, open-drain-compatible outputs, allowing output wiring to support wired-AND behavior and level translation. It is packaged in a 14-pin TSSOP surface-mount package for compact industrial, automotive, and consumer equipment.

A comparator is an analog integrated circuit that compares two input voltages and produces a logic-level result indicating which input is higher. The LM339 family combines four independent comparison channels in one package, reducing component count and simplifying board layout in threshold detection, sensor conditioning, level detection, memory, and control systems. Its open-collector outputs require an external pull-up resistor when a passive-high output is required.

Key features include a wide 3 V to 36 V supply operating range, a quad-comparator configuration, CMOS-compatible open-collector outputs, and TTL-compatible output behavior. The open-collector output structure can sink current from an output node while remaining electrically isolated from the supply rail, making the device useful in systems that use different logic voltage levels. The 14-pin TSSOP package supports automated surface-mount assembly and compact PCB layouts.

The LM339DTBR2G is intended for general-purpose comparison rather than precision voltage-reference use. Its four channels can be assigned to independent sensing or control functions, and the common supply architecture simplifies power distribution. Open-collector outputs allow several comparator outputs to share a pull-up node, provided the resulting sink-current and logic-level requirements are checked for the application.

Typical applications include automotive sensor interfaces, industrial control systems, consumer level detection, memory-device sensing, power-supply supervision, battery monitoring, and general threshold switching. The device is particularly useful when multiple analog quantities must be compared against independent thresholds or when the output must interface with a higher-voltage or open-drain bus.

When designing a board around the LM339DTBR2G, verify the comparator input common-mode range, output pull-up voltage, output sink current, and supply bypass requirements against the manufacturer datasheet. Place the input and supply-ground connections to minimize noise coupling, and use a suitable pull-up resistor on each output that must drive a logic input. Do not assume the open-collector output can source current without an external pull-up.

This product page combines the LM339DTBR2G package and ordering information with practical comparator-selection guidance, same-package alternatives, and design notes covering pull-up resistors, input common-mode limits, supply bypassing, and open-collector output behavior.

Alternativas drop-in para LM339DTBR2G — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com LM339DTBR2G (mesmo formato e footprint) — diferindo em Comparator Type, Output Type, Output Compatibility, Supply Configuration, Supply Voltage Range.

Texas Instruments
Output Type: Open-collector
Output Compatibility: Compatible with TTL, MOS, and CMOS
Supply Voltage Range: 2 V to 36 V
Comparar com LM339DTBR2G →
Texas Instruments
Comparator Type: 4 differential comparators
Output Compatibility: TTL, MOS, and CMOS compatible
Supply Configuration: Single or dual supply
Comparar com LM339DTBR2G →

LM339PW

✅ Drop-In
Texas Instruments
📦 14-pin TSSOP
Quad differential comparator · 4 channels · Open-collector · 2 V to 36 V · Up to 38 V · 300 ns · 1 µs · 0.37 mV

Consulte o preço

Ver ficha técnica →

LM239PT

✅ Drop-In
📦 14-pin TSSOP
Same 14-pin TSSOP quad-comparator class; verify supply, input common-mode range, response timing, and output-current specifications before substitution.

📋 Alternativa de referência (fora do catálogo)

LM339PWG4

✅ Drop-In
Texas Instruments
📦 14-pin TSSOP
4 channels · 4 differential comparators · Open collector · Single or dual supply · 38 V · 2 V to 36 V · 0.8 mA · 200 uA

Consulte o preço

Ver ficha técnica →

LM339DTBR2G Classificações máximas e características elétricas

Comparator Type Quad differential comparator
Number of Channels 4 channels
Supply Voltage Range 3 V to 36 V
Supply Configuration Single supply
Tipo de saída Open collector
Logic Compatibility CMOS and TTL compatible
Operating Temperature Grade Commercial temperature grade
Encapsulamento 14-pin TSSOP
Tipo de montagem Surface mount

Guia de Configuração de Pinos do LM339DTBR2G 14-pin tssop

Configuração de pinos para LM339DTBR2G (pacote 14-pin tssop). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.

Diagrama de pinagem do pacote 14-pin tssop para LM339DTBR2G

Nenhum dado detalhado de pinagem disponível para LM339DTBR2G.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

LM339DTBR2G é adequado para 6 aplicaçãos: Automotive Sensor Threshold Detection, Industrial Level Detection, Memory and Logic Control, Power Supply Supervision, Consumer Battery Monitoring, Open-Drain Interface and Wired-AND Control.

🚗

Automotive Sensor Threshold Detection

The LM339DTBR2G fits automotive and industrial sensor interfaces where several analog signals must be compared against independent thresholds. Its four open-collector channels can provide separate high, low, or over-range indications without requiring four separate packages. The 3 V to 36 V single-supply range supports systems using a common protected rail, while the TSSOP package helps reduce board area. Each open-collector output needs a pull-up matched to the receiving logic voltage. Because the input common-mode range and automotive qualification are product-specific, confirm both in the onsemi documentation before deploying the device in a safety-relevant or production automotive circuit.

🏭

Industrial Level Detection

The LM339DTBR2G is suitable for industrial level and limit detection in tanks, machinery, and process equipment. Four comparator channels can monitor multiple sensor outputs or compare a sensed voltage against a reference threshold, providing open-collector status signals to PLC or relay-driver circuits. Its wide 3 V to 36 V supply capability is useful for industrial environments, while the open-collector outputs simplify interfacing to isolated or low-voltage logic when an external pull-up is fitted. Keep input and output routing separate from high-current switching paths, and verify the comparator's input common-mode limits for the exact sensor voltage range.

🖥️

Memory and Logic Control

The LM339DTBR2G can be used in memory-related sensing and logic-control circuits where a signal must be compared against a threshold and translated into an open-collector status. The four-channel arrangement allows compact implementation of multiple control decisions, while open-collector outputs permit wired-AND behavior with a shared pull-up. This is useful in legacy control logic and board-level supervision systems. Design the pull-up rail for the receiving logic, confirm that only one output drives the shared node low at a time, and provide local supply bypassing close to the device to reduce comparator noise and switching transients.

⚡

Power Supply Supervision

The LM339DTBR2G can supervise multiple power rails by comparing divided supply voltages with reference thresholds and driving open-collector fault signals. The quad architecture provides independent positive and negative rail checks, overvoltage indication, or power-good signaling within one package. A pull-up allows the fault output to operate at the voltage expected by a supervisor, microcontroller, or system controller. Use resistor dividers with suitable tolerance and temperature characteristics, keep the comparator inputs away from switching-node noise, and check the minimum supply voltage needed for valid operation in the target power tree.

📱

Consumer Battery Monitoring

The LM339DTBR2G is appropriate for battery-powered products requiring simple voltage threshold indicators or charger-state decisions. Its four channels can monitor pack voltage, cell balance conditions, or charger status signals, while the 3 V to 36 V supply range accommodates protected battery-derived rails. Open-collector outputs can drive a pull-up to a low-energy system rail or communicate with a host controller. In a portable design, minimize leakage paths, select resistor dividers carefully for battery life, and keep the comparator supply current and operating range aligned with the product's battery budget.

🔧

Open-Drain Interface and Wired-AND Control

The LM339DTBR2G is well suited to systems requiring an open-collector status bus rather than a push-pull logic output. Multiple comparator channels can share a pull-up node to create a wired-AND fault indication, allowing a supervisor to detect any asserted condition. This arrangement is useful in test equipment, control boards, and legacy industrial interfaces. Specify the maximum pull-up voltage, output sink current, and allowable total bus capacitance before assigning the node. Avoid simultaneous opposing drive conditions, provide a defined state during power-up, and route the shared node away from adjacent high-speed signals to minimize transient coupling.

Resumo dos produtos recomendados

LM339PW Texas Instruments Usado em: Automotive Sensor Threshold Detection, Memory and Logic Control, Consumer Battery Monitoring LM239PT Quad comparator family alternative for evaluation Usado em: Automotive Sensor Threshold Detection, Industrial Level Detection, Memory and Logic Control, Power Supply Supervision, Consumer Battery Monitoring, Open-Drain Interface and Wired-AND Control LM339PWG4 Texas Instruments Usado em: Industrial Level Detection, Power Supply Supervision, Open-Drain Interface and Wired-AND Control
What is the onsemi LM339DTBR2G?
The onsemi LM339DTBR2G is a four-channel differential comparator IC in a 14-pin TSSOP package. It operates from a single 3 V to 36 V supply and provides open-collector outputs with CMOS and TTL compatibility. The four channels are intended for level detection, low-level sensing, memory, automotive, and industrial comparison applications.
What is the operating voltage range of LM339DTBR2G?
The LM339DTBR2G is specified for a 3 V to 36 V single-supply operating range. The product listing identifies the device as a single-supply quad comparator, making it suitable for circuits operating from low-voltage logic rails through substantially higher industrial supply voltages. Check the input common-mode limits separately before applying a supply voltage.
How many comparators are in the LM339DTBR2G?
The LM339DTBR2G contains four independent differential comparator channels. Each channel compares two input voltages and provides its own open-collector output. The quad arrangement allows one package to handle multiple threshold, sensing, or control functions while keeping the supply and ground connections shared.
Why does the LM339DTBR2G need an external pull-up resistor?
The LM339DTBR2G has open-collector outputs, so the output transistor can sink current but cannot actively drive a high voltage. An external pull-up resistor connects each output to the logic rail used by the receiving circuit. The resistor value should be selected from the datasheet's sink-current and input-current limits for the intended logic voltage.
Can LM339DTBR2G outputs be tied together?
The LM339DTBR2G open-collector outputs can be connected to a common pull-up node when wired-AND behavior is required. Only one output should actively sink at a time, and the pull-up must satisfy the logic load current. The design must also avoid contention between outputs that are simultaneously driven low by different channels.
Is LM339DTBR2G pin compatible with LM339PW?
LM339PW is identified in the cross-reference information as a pin-to-pin replacement candidate for the LM339 family. The LM339DTBR2G and LM339PW are both associated with the 14-pin TSSOP comparison-device family, so they can be considered for the same footprint. Review the specific manufacturer datasheets for operating limits, output timing, and any parameter differences before production substitution.
What is the difference between LM339DTBR2G and LM339PW?
LM339DTBR2G is the onsemi 14-pin TSSOP ordering variant, while LM339PW is identified as a pin-to-pin replacement candidate in the LM339 cross-reference information. Their practical distinction is the manufacturer and ordering code rather than a confirmed functional difference in the core quad-comparator architecture. Confirm the electrical limits and temperature grade in the applicable datasheet.
What is the best drop-in replacement for LM339DTBR2G?
The best drop-in replacement must use the same 14-pin TSSOP footprint, preserve the four open-collector comparator channels, and meet the required 3 V to 36 V supply and input common-mode limits. LM339PW is listed as a pin-to-pin replacement candidate for the LM339 family. LM239PT and LM339PWG4 are also relevant family candidates, but each substitution requires datasheet review for exact parameters.
Can an LM239PT replace an LM339DTBR2G?
LM239PT is a candidate for the same 14-pin TSSOP comparator footprint, but replacement is conditional on confirming electrical and functional compatibility. Verify the supply range, input common-mode range, output sink current, response timing, and operating temperature grade against the LM339DTBR2G requirements. The cross-reference material supports family-level substitution, not unconditional production equivalence.
Where can I find the LM339DTBR2G pinout?
The LM339DTBR2G pin assignment is published in the onsemi LM339 family datasheet and in the package documentation associated with the 14-pin TSSOP ordering code. Use the manufacturer pin-description table when assigning inputs, outputs, supply, and ground connections. The exact pin names are not reproduced on this page, so use the datasheet diagram for PCB implementation.
Where can I download the LM339DTBR2G datasheet PDF?
The LM339DTBR2G datasheet is available through the manufacturer-linked documentation and the listed semiconductor-document sources. The onsemi-family datasheet describes the quad comparator, electrical characteristics, pin assignments, and application information. Use the manufacturer document as the authoritative reference for final design decisions.
Is LM339DTBR2G suitable for automotive applications?
The LM339DTBR2G is described for automotive, industrial, and consumer electronic applications, but the exact AEC-Q100 qualification status is not established by the product listing. For an automotive production design, verify the orderable part's qualification, temperature grade, documentation, and any customer-specific requirements with onsemi.
How do I choose a pull-up resistor for LM339DTBR2G?
Choose the pull-up voltage from the logic rail that the output must drive, then calculate the resistor using the comparator's specified sink-current limit and the receiving input's current requirement. The output resistor also affects rise time and switching noise. Use the datasheet limits and account for the pull-up voltage, capacitor loading, and required logic transition speed.
What type of comparator is LM339DTBR2G?
The LM339DTBR2G is a general-purpose quad differential comparator with an open-collector output stage. It is not a precision amplifier or voltage-reference device. It is suited to threshold detection, sensor-level comparison, logic generation, and control functions where the output is used as a logic or open-drain signal.
Where can I buy LM339DTBR2G and what is the lead time?
Use the Request a Quote form on this page to request LM339DTBR2G availability, current lead time, and order details. The product is listed by authorized distribution channels as a catalog comparator, but the current quote, inventory position, and delivery schedule should be confirmed for the exact 14-pin TSSOP ordering code.
What are the key specifications of LM339DTBR2G that engineers should know?
The key engineering specifications for the LM339DTBR2G are four independent comparator channels, a 3 V to 36 V single-supply range, open-collector outputs, CMOS and TTL compatibility, and a 14-pin TSSOP package. The design must also account for an external output pull-up and the device's input common-mode and output-current limits. The complete electrical limits are listed in the manufacturer datasheet.

Dados de referência de engenharia para LM339DTBR2G — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the LM339DTBR2G when the design needs four general-purpose differential comparators, open-collector outputs, and a 14-pin TSSOP footprint in a commercial-temperature single-supply design. It is particularly appropriate for industrial level detection, battery monitoring, power-supply supervision, and legacy control interfaces where a pull-up resistor is already part of the system architecture. Review LM339PW and LM339PWG4 as same-family options when supply-chain continuity, manufacturer qualification, or an existing qualified BOM matters. Consider LM239PT when an STMicroelectronics source is preferred, but compare its exact input common-mode range, response timing, output-current capability, and temperature grade before approving a substitution. A true drop-in decision requires more than package equivalence: verify every DC limit, output timing parameter, and application condition in the relevant manufacturer datasheet.

Comparação com alternativas

Parâmetro Este produto LM339PW LM239PT LM339PWG4
Package 14-pin TSSOP 14-pin TSSOP 14-pin TSSOP 14-pin TSSOP
Brand onsemi Texas Instruments STMicroelectronics Texas Instruments
Comparator Channels 4 4 4 4
Output Type Open collector Open collector Open collector Open collector

Principais diferenciais

  • Four-channel integration in a 14-pin TSSOP (vs LM339PW)
  • Open-collector output architecture (vs LM239PT)
  • Wide single-supply operating range (vs LM339PWG4)
  • Commercial-grade onsemi ordering option (vs LM239PT)

Notas de projeto

Use a dedicated pull-up resistor on every open-collector output that must drive a logic input. Select the pull-up rail from the receiving circuit's voltage domain, then check the comparator sink-current limit and the input current requirement. Keep the pull-up value high enough to preserve the required logic-low sink current and low enough to achieve the required rise time.

Place the device close to the signals it compares and route the input traces away from switching nodes, relay contacts, and high-current power paths. Keep the four comparator channels physically separated when their inputs switch at different rates, because shared ground impedance can move input thresholds. Follow the datasheet's recommended bypass-capacitor placement and provide a low-impedance return path.

Do not treat the open-collector output as a push-pull logic driver or use the supply voltage as an automatic output-high source. Verify that the pull-up voltage, input common-mode voltage, differential input voltage, and total supply range are valid at every operating condition. For wired-AND outputs, confirm that no two channels can sink the shared node simultaneously.

An open-collector output transitions high through the pull-up rather than an active driver, so its rising edge can be slow when the node has capacitance. Keep output traces short, minimize load capacitance, and avoid adding an excessive pull-up resistance. If a fast rising edge is required, verify the output timing and use a receiver with suitable input characteristics.

The comparator's normal dissipation is generally modest, but supply voltage, output sink current, and ambient temperature still affect junction temperature. Use the manufacturer thermal information for the TSSOP package and avoid placing the device beside a high-power regulator or heat source. Confirm the operating-temperature grade for the final assembly environment.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The product information identifies automotive and industrial applications but does not establish the exact orderable part's RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.

Dados verificados em: 2026-11-09 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

LM339DTBR2G datasheet LM339DTBR2G pinout LM339DTBR2G datasheet pdf LM339DTBR2G equivalent LM339DTBR2G replacement LM339DTBR2G cross reference LM339DTBR2G price LM339DTBR2G stock onsemi LM339DTBR2G LM339DTBR2G 14-pin TSSOP LM339DTBR2G 3V 36V comparator LM339DTBR2G open collector output LM339DTBR2G automotive sensor interface LM339DTBR2G industrial level detection LM339DTBR2G pull-up resistor

Componentes & termos relacionados

onsemi LM339DTBR2G LM339PW LM239PT LM339PWG4 quad differential comparator comparator IC analog comparator open-collector output open-drain interface single-supply operation CMOS-compatible logic TTL-compatible logic 3 V to 36 V supply 14-pin TSSOP TSSOP package family surface-mount package level detection sensor interface power-supply supervision wired-AND logic external pull-up resistor battery monitoring industrial control automotive electronics
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ