LTC2344CUH-16 - Quad 16-Bit 400ksps/ch SoftSpan SAR ADC | Analog Devices
N.º da peça: LTC2344CUH-16 ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $28.5 | $28,50 |
| 10 | $26.05 | $260,50 |
| 100 | $23.4 | $2.340,00 |
| 500 | $20.85 | $10.425,00 |
| 1.000 | $18.95 | $18.950,00 |
LTC2344CUH-16 Visão geral
What is a SAR ADC? A successive-approximation-register analog-to-digital converter is a precision data converter that performs a binary search through an internal capacitive network, comparing the sampled input against an internal DAC one bit per clock cycle to converge on the digital output. SAR ADCs sit in the broader ADC family alongside delta-sigma, pipeline, and flash converters; they offer an excellent balance of resolution (16-20 bits), sampling rate (100 ksps to multi-MB ms), latency (single-cycle, deterministic), and power consumption, which is why they dominate multiplexed data-acquisition, industrial instrumentation, and high-speed control-loop applications.
Key features include per-channel independent input ranges, true simultaneous sampling across all four ADCs, an integrated precision reference and reference buffer, pin-selectable SPI/LVDS interface, and configurable one-to-four-lane CMOS output for bus-width optimization. The combination of 93.4 dB SNR and 102 dB CMRR allows the part to directly digitize wide common-mode signals in noisy industrial environments without front-end signal conditioning.
Typical applications include industrial process control and multichannel data acquisition systems, medical instrumentation such as patient monitoring and ECG/EMG front ends, optical networking, and multi-axis motor control. The simultaneous-sampling architecture is particularly valuable in three-phase power monitoring and vibration analysis where channel-to-channel phase relationships must be preserved.
When designing with this device, place the internal reference bypass capacitor and decoupling capacitors close to the pins and follow the Analog Devices reference layout for the exposed pad. The SoftSpan per-channel range control requires writing the range register between conversions, which must be accounted for in software timing. Pricing and availability data are quoted as of 2026-10-13.
This page synthesizes distributor stock, drop-in same-package alternatives, and design considerations not collected in the manufacturer datasheet alone.
Alternativas drop-in para LTC2344CUH-16 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com LTC2344CUH-16 (mesmo formato e footprint) — diferindo em Operating Temperature Range, Number of Channels, Package, Input Range (SoftSpan), Analog Supply Voltage.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
LTC2344CUH-16#TRPBF
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
LTC2344IUK-16
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
LTC2344CUH-18
✅ Drop-In✓ Em estoque
$18.2 / unidade
Ver ficha técnica →LTC2341HUH-18
✅ Drop-In✓ Em estoque
$24.95 / unidade
Ver ficha técnica →LTC2335HLX-16
✅ Drop-In✓ Em estoque
$15.4 / unidade
Ver ficha técnica →LTC2344CUH-16 Classificações máximas e características elétricas
| Resolução | 16 bits |
| Number of Channels | 4 |
| Sampling Rate (per channel) | 400 ksps |
| Architecture | SAR (Successive Approximation Register) |
| Input Type | Differential, wide common-mode range, SoftSpan |
| Input Range (SoftSpan) | 0V-5.12V up to ±10.24V, per-conversion selectable |
| INL (Não linearidade integral) | ±1.25 LSB |
| SNR (Signal-to-Noise Ratio) | 93.4 dB |
| CMRR (Common-Mode Rejection) | 102 dB |
| No Missing Codes | 16 bits guaranteed |
| Analog Supply Voltage | 4.75 V to 5.25 V (5 V typical) |
| Digital Supply Voltage | 1.8 V to 5 V |
| Serial Interface | SPI CMOS (1.8V-5V) and LVDS, pin-selectable |
| CMOS Output Lanes | 1 to 4, user-configurable |
| Encapsulamento | 32-QFN (5x5 mm) with exposed pad |
| Tipo de montagem | Surface Mount |
| Faixa de temperatura de operação | -40 °C to +125 °C (C grade) |
| Status RoHS | Compliant (Pb-free #PBF suffix) |
Configuração de pinos do LTC2344CUH-16
| Pino 1 | IN1+ — Differential analog input 1, positive |
| Pino 2 | IN1- — Differential analog input 1, negative |
| Pino 3 | IN2+ — Differential analog input 2, positive |
| Pino 4 | IN2- — Differential analog input 2, negative |
| Pino 5 | IN3+ — Differential analog input 3, positive |
| Pino 6 | IN3- — Differential analog input 3, negative |
| Pino 7 | IN4+ — Differential analog input 4, positive |
| Pino 8 | IN4- — Differential analog input 4, negative |
| Pino 9 | REF — Reference voltage output, requires bypass capacitor |
| Pino 10 | GND — Analog ground |
| Pino 11 | OVDD — Digital I/O supply voltage (1.8V-5V) |
| Pino 12 | GND — Digital ground |
| Pino 13 | SDO — Serial data output (CMOS) / LVDS output |
| Pino 14 | SDO- — LVDS complementary serial data output |
| Pino 15 | SCK — Serial clock input (CMOS) / LVDS clock input |
| Pino 16 | SCK- — LVDS complementary serial clock input |
| Pino 17 | SDI — Serial data input for configuration |
| Pino 18 | CNV — Conversion start input |
| Pino 19 | BUSY — Conversion busy indicator (CMOS) / LVDS busy |
| Pino 20 | BUSY- — LVDS complementary busy indicator |
| Pino 21 | MODE — Interface mode select (CMOS/LVDS) |
| Pino 22 | LVDS/CMOS — Interface type select pin |
| Pino 23 | RST — Reset input |
| Pino 24 | RDL — Read lane select |
| Pino 25 | GAIN — Gain select for SoftSpan range |
| Pino 26 | REFBUF — Reference buffer bypass |
| Pino 27 | AVDD — Analog supply voltage (5V) |
| Pino 28 | AVDD — Analog supply voltage (5V) |
| Pino 29 | GND — Analog ground |
| Pino 30 | GND — Analog ground |
| Pino 31 | NC — Not connected (per datasheet) |
| Pino 32 | NC — Not connected (per datasheet) |
Aplicações típicas
LTC2344CUH-16 é adequado para 6 aplicaçãos: Multichannel Industrial Data Acquisition, Medical Patient Monitoring and ECG/EMG Front Ends, Three-Phase Power Monitoring and Motor Control, Multi-Axis Vibration and Modal Analysis, Optical Networking and Spectral Monitoring, Automated Test Equipment (ATE) and Instrumentation.
Multichannel Industrial Data Acquisition
The LTC2344CUH-16's quad simultaneous-sampling channels at 400 ksps each and 93.4 dB SNR make it ideal for high-density industrial data-acquisition systems. The 102 dB CMRR allows direct digitization of differential signals riding on top of high common-mode voltages from sensor bridges and 4-20 mA loops without front-end instrumentation amplifiers. The 32-QFN (5x5) footprint fits in compact PLC analog input modules. SPI CMOS or LVDS interface selection lets designers trade bus width for cable length, with LVDS supporting backplane connections over 1 meter. Designers using such conversions can scale by stacking multiple devices on a shared SPI or LVDS bus.
Recomendado
Medical Patient Monitoring and ECG/EMG Front Ends
The LTC2344CUH-16's simultaneous sampling across four channels preserves the phase relationship between ECG leads I, II, III, and the reference electrode - critical for accurate cardiac vector analysis. At 93.4 dB SNR and ±1.25 LSB INL, the converter digitizes microvolt-level bioelectric signals with adequate resolution for diagnostic-grade monitoring. The wide ±10.24V SoftSpan input accommodates the high common-mode voltages typical of defibrillator-protected patient leads. The single 5V analog supply simplifies medical isolation barrier design, and the 1.8V-5V digital interface allows direct connection to low-power microcontrollers.
Recomendado
Three-Phase Power Monitoring and Motor Control
For three-phase current and voltage monitoring, the LTC2344CUH-16's four simultaneous-sampling channels match the four signals (three phases plus neutral) with phase coherence preserved at the converter level. The 400 ksps per channel rate supports harmonic analysis up to the 40th harmonic of a 50/60 Hz fundamental, well beyond standard power-quality meter requirements. The 102 dB CMRR rejects the high common-mode transients of switching-mode motor drives, and the 5V analog supply operates directly from rectified bus voltage rails with simple regulation.
Recomendado
Multi-Axis Vibration and Modal Analysis
Vibration modal analysis requires simultaneous sampling of multiple accelerometer channels to capture phase-coherent frequency-response functions. The LTC2344CUH-16's four channels at 400 ksps provide aggregate 1.6 Msps bandwidth, supporting vibration analysis up to 200 kHz per channel without aliasing. The 93.4 dB SNR ensures adequate dynamic range for high-fidelity modal testing, and the differential inputs accept IEPE-compatible accelerometer outputs directly. The 32-QFN (5x5) footprint enables compact multi-channel data acquisition modules.
Recomendado
Optical Networking and Spectral Monitoring
Optical spectral monitoring and DWDM channel-power measurement benefit from the LTC2344CUH-16's 93.4 dB SNR and 102 dB CMRR. Four simultaneous-sampling ADCs support parallel photodetector channels for multi-wavelength optical power monitoring in ROADM and optical add-drop multiplexer applications. The wide ±10.24V input spans accommodate the wide dynamic range typical of optical receivers, and the LVDS interface option enables long-distance backplane connection in large optical switch chassis.
Recomendado
Automated Test Equipment (ATE) and Instrumentation
Automated test equipment digitizes multi-channel DUT signals at high speed and resolution. The LTC2344CUH-16's 16-bit resolution at 400 ksps per channel with 93.4 dB SNR delivers measurement accuracy suitable for production-line testing of analog and mixed-signal ICs. The flexible SoftSpan input ranges simplify fixture design by eliminating the need for external range-switching networks. The pin-selectable SPI/LVDS interface allows fixture-side sharing and field-shareable LVDS backplane connection in larger ATE systems.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para LTC2344CUH-16 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | LTC2344CUH-16#TRPBF | LTC2344IUK-16 | LTC2344CUH-18 | LTC2341HUH-18 | LTC2335HLX-16 |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 32-QFN (5x5) | 32-QFN (5x5) - same | 32-QFN (5x5) - same | 32-QFN (5x5) - same | 32-QFN (5x5) - same | 32-QFN (5x5) - same |
| Resolution | 16 bits | 16 bits | 16 bits | 18 bits | 18 bits | 16 bits |
| Number of Channels | 4 | 4 | 4 | 4 | 1 | 8 |
| Sampling Rate (per channel) | 400 ksps | 400 ksps | 400 ksps | 400 ksps | 200 ksps | 500 ksps |
| Operating Temperature Range | -40 °C to +125 °C | -40 °C to +125 °C | -40 °C to +125 °C (I grade) | -40 °C to +125 °C | -40 °C to +125 °C | -40 °C to +125 °C |
Principais diferenciais
- Quad simultaneous-sampling at 400 ksps per channel (vs LTC2341HUH-18)
- Resolution upgrade path within same footprint (vs LTC2344CUH-18)
- Pin-selectable SPI/LVDS interface (vs LTC2335HLX-16)
Notas de projeto
The LTC2344CUH-16 requires a clean 5V analog supply on AVDD and a separate 1.8V-5V digital supply on OVDD. Estimated: at 400 ksps with all four channels active, the analog supply current is in the 10-20 mA range per the datasheet typical characteristics; use a low-noise LDO such as the LT3042 with adequate bulk decoupling. Place a 10 µF ceramic bypass capacitor close to each AVDD pin and a 0.1 µF decoupling capacitor directly at the supply pins to reduce ADC noise coupling from the digital switching circuits.
The 32-QFN package has an exposed thermal pad that MUST be soldered to a ground plane on the PCB for thermal dissipation and electrical performance. Per Analog Devices reference layouts, use a continuous ground plane under the device, route analog input traces as differential pairs with ground guard traces, and place the reference bypass capacitor as close as possible to the REF pin. The REFBUF pin requires a 10 µF X7R ceramic bypass capacitor to ground for reference stability.
Route analog inputs (IN1± to IN4±) as matched-length, matched-impedance differential pairs with no vias where possible. Isolate analog and digital sections with a ground moat or split plane, joining at a single point near the ADC. Keep digital interface traces (SDO, CNV, SCK) away from analog input traces to avoid digital switching noise coupling into the analog front end. Maintain 50-ohm controlled impedance on LVDS pairs if LVDS interface mode is selected.
Do not operate the LTC2344CUH-16 without the REF bypass capacitor - the internal reference buffer requires external bypass for stability. Avoid driving analog inputs beyond the selected SoftSpan span or exceeding the absolute maximum ratings (±15V on analog inputs); this can permanently damage the device. When using LVDS interface mode, verify 100-ohm differential termination at the receiver end to prevent signal integrity issues. The SoftSpan range must be written to the configuration register before each conversion - forgetting this causes incorrect output codes.
Informações de conformidade
RoHS compliant per #PBF suffix designation on Analog Devices datasheet. Lead-free (Pb-free) reflow-compatible. Not AEC-Q100 qualified - this is an industrial/medical grade part, not automotive grade. Halogen-free status not explicitly confirmed in the provided data.
