LTC3112MPFE#PBF - 15V, 2.5A Sync Buck-Boost | Analog Devices
N.º da peça: LTC3112MPFE#PBF ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $8.5 | $8,50 |
| 10 | $7.65 | $76,50 |
| 100 | $6.8 | $680,00 |
| 500 | $6.12 | $3.060,00 |
| 1.000 | $5.5 | $5.500,00 |
LTC3112MPFE#PBF Visão geral
A buck-boost converter is a type of DC-DC converter that can produce an output voltage either higher or lower than the input voltage. It is essential in battery-powered systems where the battery voltage can drop below or rise above the required rail. The LTC3112 uses a unique 4-switch, single inductor architecture that provides low noise and seamless transitions between buck, boost, and buck-boost modes, ensuring a stable output regardless of input variations.
Key features include a switching frequency of 750kHz, which allows for small external components, and a high efficiency synchronous design that eliminates the need for an external Schottky diode. The device also includes a built-in soft-start, overcurrent protection, and thermal shutdown. The exposed pad on the TSSOP package aids in thermal dissipation, making it suitable for high-current applications.
The LTC3112MPFE#PBF is designed for a wide range of applications, including 3.3V or 5V rails from 1, 2, or 3 Li-Ion cells, backup capacitor stacks, handheld inventory terminals, RF transmitters, 12V synchronous boost converters, multiple power input systems, LED lighting with current regulation, and 12V lead-acid battery to 12V conversion. Its wide input range and high output current make it a versatile choice for portable and industrial equipment.
When designing with this converter, pay attention to the inductor selection and PCB layout to minimize noise and ensure stability. The exposed pad should be soldered to a large copper area for effective heat sinking. The LTC3112MPFE#PBF is RoHS compliant and lead-free, making it suitable for environmentally conscious designs.
Alternativas drop-in para LTC3112MPFE#PBF — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com LTC3112MPFE#PBF (mesmo formato e footprint) — diferindo em Operating Temperature Range, Function, Switching Frequency.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
LTC3112HFE#PBF
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
LTC3112EFE#PBF
✅ Drop-In✓ Em estoque
$4.3 / unidade
Ver ficha técnica →LTC3112MPFE#TRPBF
✅ Drop-In✓ Em estoque
$5.06 / unidade
Ver ficha técnica →LTC3112MPFE#PBF Classificações máximas e características elétricas
| Função | Buck-Boost |
| Tipo de saída | Adjustable |
| Faixa de tensão de saída | 2.5V to 14V |
| Output Current | 2.5A |
| Faixa de tensão de entrada | 2.7V to 15V |
| Frequência de comutação | 750kHz |
| Número de saídas | 1 |
| Retificador síncrono | Yes |
| Encapsulamento | 20-TSSOP (0.173", 4.40mm Width) Exposed Pad |
| Faixa de temperatura de operação | -55°C to +150°C (TJ) |
| Tipo de montagem | Surface Mount |
| Status RoHS | Compliant |
| Lead-Free | Yes |
| Number of Terminals | 20 |
| Package Code | HTSSOP |
Configuração de pinos do LTC3112MPFE#PBF
| Pino 1 | SW1 — Switch node connection to inductor |
| Pino 2 | PVIN — Power input supply |
| Pino 3 | PVIN — Power input supply |
| Pino 4 | GND — Ground |
| Pino 5 | GND — Ground |
| Pino 6 | SW2 — Switch node connection to inductor |
| Pino 7 | SW2 — Switch node connection to inductor |
| Pino 8 | PVOUT — Power output |
| Pino 9 | PVOUT — Power output |
| Pino 10 | VOUT — Output voltage sense |
| Pino 11 | VOUT — Output voltage sense |
| Pino 12 | VFB — Feedback input |
| Pino 13 | RUN — Enable input |
| Pino 14 | SYNC — External clock sync |
| Pino 15 | MODE — Mode selection |
| Pino 16 | SS — Soft-start programming |
| Pino 17 | ITH — Error amplifier output |
| Pino 18 | VIN — Input supply |
| Pino 19 | VIN — Input supply |
| Pino 20 | GND — Ground |
Aplicações típicas
LTC3112MPFE#PBF é adequado para 6 aplicaçãos: Battery-Powered Handheld Devices, RF Transmitters, LED Lighting with Current Regulation, 12V Lead-Acid Battery to 12V Conversion, Backup Capacitor Stack, Multiple Power Input Systems.
Battery-Powered Handheld Devices
The LTC3112MPFE#PBF is ideal for handheld devices powered by 1-3 Li-Ion cells, providing a regulated 3.3V or 5V rail. Its wide input range (2.7V to 15V) ensures stable operation as the battery voltage drops, and the 2.5A output can power processors, displays, and wireless modules. The high switching frequency allows small external components, saving board space in compact designs.
Recomendado
RF Transmitters
RF transmitters require clean, stable power rails to avoid noise coupling into the signal. The LTC3112MPFE#PBF's low-noise 4-switch architecture and 750kHz switching frequency minimize interference. It can deliver 2.5A to support high-power amplifiers, and its wide input range allows operation from various battery configurations. The exposed pad aids thermal management during continuous transmission.
Recomendado
LED Lighting with Current Regulation
The LTC3112MPFE#PBF can be configured as a constant-current source for LED lighting, maintaining a stable current as the input voltage varies. Its buck-boost capability ensures the LED string voltage can be above or below the input, and the 2.5A output can drive multiple high-power LEDs. The high switching frequency reduces inductor size, enabling slim lighting fixtures.
Recomendado
12V Lead-Acid Battery to 12V Conversion
In automotive and industrial systems, a 12V lead-acid battery can vary from 9V to 15V. The LTC3112MPFE#PBF regulates this to a stable 12V output, ensuring consistent performance for sensitive electronics. Its 2.5A output can power sensors, controllers, and communication modules. The wide temperature range (-55°C to +150°C) suits under-hood and outdoor installations.
Recomendado
Backup Capacitor Stack
For systems requiring ride-through during power interruptions, the LTC3112MPFE#PBF can boost a capacitor stack voltage to a regulated rail. Its buck-boost topology allows the capacitor voltage to discharge below the output while maintaining regulation. The 2.5A output supports critical loads like data loggers and alarm systems, and the low quiescent current extends backup duration.
Recomendado
Multiple Power Input Systems
Systems that can be powered from USB, battery, or an external adapter benefit from the LTC3112MPFE#PBF's wide input range. It seamlessly handles input voltages from 2.7V to 15V, providing a stable output regardless of the source. This simplifies power path management and reduces component count, making it ideal for portable instruments and IoT gateways.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para LTC3112MPFE#PBF — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | LTC3112HFE#PBF | LTC3112EFE#PBF | TPS63070RNMT |
|---|---|---|---|---|
| Package | 20-TSSOP Exposed Pad | 20-TSSOP Exposed Pad | 20-TSSOP Exposed Pad | VQFN-15 |
| Brand | Analog Devices | Analog Devices | Analog Devices | Texas Instruments |
| Input Voltage Range | 2.7V to 15V | 2.7V to 15V | 2.7V to 15V | 2V to 16V |
| Output Voltage Range | 2.5V to 14V | 2.5V to 14V | 2.5V to 14V | 2.5V to 12V |
| Output Current | 2.5A | 2.5A | 2.5A | 2A |
| Switching Frequency | 750kHz | 750kHz | 750kHz | 2.4MHz |
| Operating Temperature Range | -55°C to +150°C | -40°C to +150°C | -40°C to +125°C | -40°C to +125°C |
| Pin Compatibility | Reference | Yes | Yes | No |
Principais diferenciais
- Military temperature range (vs LTC3112EFE#PBF)
- Higher output current (vs TPS63070RNMT)
- Pin-compatible with other LTC3112 variants (vs TPS63070RNMT)
Notas de projeto
For optimal performance, place the input and output capacitors as close as possible to the PVIN and PVOUT pins. Use a 10µF ceramic capacitor for input and output. The inductor should be placed near the SW pins to minimize parasitic inductance. The exposed pad must be soldered to a large copper area for thermal dissipation.
The LTC3112MPFE#PBF can dissipate significant power at high output currents. With a typical efficiency of 90%, at 2.5A output and 5V, power loss is about 1.4W. The thermal resistance of the TSSOP-20 package is approximately 40°C/W, so the junction temperature rise is about 56°C. Ensure adequate copper area or airflow to keep the junction below 150°C.
Do not exceed the absolute maximum input voltage of 16V. Ensure the inductor saturation current is higher than the peak switch current. The RUN pin must be pulled high to enable the device; floating it may cause unpredictable behavior. Use a proper soft-start capacitor to limit inrush current during startup.
Informações de conformidade
RoHS compliant and lead-free per JLCPCB listing. Not AEC-Q100 qualified.
